Satellite P750 - Wireless disconnects when wake the portable computer from the 'standby mode '.

Similar Questions

• Satellite C660: Wireless Internet when remove the power supply drops

  Hello
  new Tosh Satellite C660 laptop works fine when the power supply cord is connected, soon as directed power is removed drops internet connection, usually to the second web page (the first web page is accessible, failure occurs usually when you try to access a new page)

  When I connect the power cable, internet connectivity returns as usual!

  I've been on the Advanced page setings power management,
  I have power settings "balanced" set up, and for the realtek card wireless put the plug and batttery power to maaximum settings (before they were to the maximum for diet and balanced for battery) even if it has no impact.

  The connection between the laptop and the wireless box seems 'excellent' level, the internet is the element which is a failure.

  I use the standard realteck card from the laptop (Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC) a D-Link Wireless N Router (DIR-615 ver1.00) and standard Modem provided by Virginmedia who bring them my services to wide band.

  All suggestions are welcome!
  Rick

  Hello

  Try the Realtek WLan driver Realtek page.
  www.Realtek.com.tw

  I read here in the forum that it has helped to get rid of these questions.
  Of course, you must also disable as mentioned in your message to save energy.

  Here, the other thread which confirms this driver update allows:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=58112

• Satellite Pro A300 freezes when on the internet

  Satellite Pro A300 freezes when on the internet & the only way to turn it off is to take out the battery. Bought new Dec 2010 & is under warranty - suggestions?

  Hello

  have you tried to update drivers Lan (wlan)? What browser do you use? I guess, the Internet explorer, try firefox or opera. Also, your computer may be infected with the virus, or blocked by the firewall. Have you installed software before it starts? Is this ok when you bought it? I ask you too, because you do not have a lot of information.
  It is especially the driver, software problem.

• Satellite P750-114 - disk space to the critical level

  Hello

  I recently bought by Satellite P750-114 and now I get a message from toshiba Tempro my partition is cricial level as it reached 90% or more.

  Could someone help me with this please? Why did I get this? something wrong?

  To be honest I n don't know what the problem with Tempro, but this tool is somewhat strange. Nothing is false, then there is no reason to panic.

  Believe me best you can do is to remove it. In General, it is a nice and useful tool, but you don't need to all n.

  Remove it from the system and be happy.

• Sierra crash when after the "sleep mode"

  My MacBook Pro (13-inch, mid 2012) after update of the sierra accident when, after the "sleep mode".

  I try to reset the SMC sama NVRAM but always crash.

  suggest to solve?

  Thank you

  When you say 'crash', what do you mean?

  Probably something that runs in the background. Open the black Apple at the top left. Select system, then users and groups and login items Preferences. All deleted in this window.

  You can add applications and programs back to the points of connection with a window to see what is the origin of the crash.

  You can also start the computer start-up (hold down the SHIFT key when you start) which will make the computer start with no 3rd party apps. If that solves the problems, just disable the third-party applications and add back one by one until the problem occurs again.

• Satellite P750 - 02K - how to enable the wireless interface?

  Hello

  I just bought a new laptop Satellite P750 / 02K with Windows 7 64 bit. How can I enable the wireless interface?

  I tried the Fn + F8, but it says it all, this is the 'wireless communication is disabled. Please activate the wireless communication switch. There is no switch that I see. The device driver is enabled and active. I even tried to reinstall the driver. The user manual makes no reference to a process physical either pass. I checked the BIOS but see no setting for all the wireless settings. I tried to restart the flash without result map.

  Any suggestions? Thank you.

  Hey Buddy,

  I Don t Satellite P750 in front of me, but the wireless network card is in the Device Manager?

  On Satellite P750, there is a tactile button between the screen and the keyboard to turn the WLAN function. The second button on the left (symbol of the antenna), you need to press to activate the WLAN.

  Also, check the BIOS. As I know most notebook contains an option for the WLAN that must be set to active.

• Satellite P750 - 02Q 001 - cannot install the Bluetooth and Tuner DVB-T_ATSC Yuan

  I have more than 20 years and the first time ever answer concerning support for the installation of a driver... sheeezz

  Recently bought laptop below and formatting of disk with WIndows 7 ultimate + SP1 (64-bit)

  Australia
  TOSHIBA SATELLITE P750 - PSAY3A - 02Q 001

  Cannot install the latest drivers below (everything worked when bought the laptop):

  -Yuan DVB-T_ATSC Tuner driver (for TV Tuner model only) driver 2.3.3.31 Windows 7 64 - bit 2.9 MB
  -Bluetooth Stack for Windows by Toshiba Bluetooth 8.00.06 (T) Windows 7 64-bit 78,08 MB

  * DVB - T Tuner Driver *.
  The EXE file extracted in the temp folder and goes no further.
  The device driver shows "STK7700D" with an exclamation mark against it. See the image below.

  * Bluetooth Driver *.
  First installation install the original driver, then he received close to 50% through the installation (appears to fail to install the components of RF RFBUS).

  Then install attempt fails to go too far (is unable to install the driver at all).

  Third attempt and subsequent attempts to repeat the foregoing in order. Install it just gets to a point and is unable to go any further.

  I tried to disable all Wireless WAN and various other comments and try the install again. Repeats exactly as above!

  Refer to pictures:

  DEVICE MANAGER
  http://I52.Tinypic.com/35cr38i.jpg

  1ST COURSE SETUP
  http://I52.Tinypic.com/2r6jfv9.jpg

  2ND INSTALL PROGRESS
  http://i55.Tinypic.com/jgphfc.jpg

  see you soon

  Dennis

  > The EXE file extracted in the temp folder and goes no further.
  > The device driver shows "STK7700D" with an exclamation mark against it. See the image below

  Try to extract the exe from another place, not in the temp folder.
  In my case, I created a folder on a second partition (D) and have extracted the exe file in this folder. Can go to the Device Manager, and then can install the driver through the Device Manager.
  Choose the installation procedure advantage and point to the folder that contains the extracted files.

  With regard to the issue of the BT;
  Download the new battery of BT from here:
  http://APS2.toshiba-tro.de/Bluetooth/

  Then clean the registry using the CCleaner.
  This tool is freeware and can be downloaded on several different pages.
  So after cleaning check if you could install new BT of the register stack.

• Satellite P750: Unable to connect to the other PC with WLAN

  Satellite P750 was working fine until yesterday.

  Today, when you use the Atheros AR9002WB-1NG wireless adapter I can't connect to the other pc on the network.
  However, I can connect to the internet ok.
  Other pc can not see me either.

  * When I use wired everything is ok *.
  I tried to stop the antivirus and firewall, but it made no difference. I reinstalled the drivers and etc. shares checked file.

  Can anyone help please?

  Hello

  You should enable the option called Ad-hoc to peer option in your WLan settings!
  Go to network connections
  Select connections-> properties-wireless
  Add the new network
  Here you must configure this (insert SSID, encryption, and password), and don t forget to check this is a computer-to-computer (ad hoc) network

• Satellite P750 PSAY1A: how to create the recovery Toshiba on the new HARD drive partition

  Hello

  I have an old Toshiba Satellite P750 (PSAY1A-01Y022). I just upgraded my memory from 4 GB to 8 GB and am preparing to take my 500 GB HARD drive 1 TB. I had to order the disk online and wait to happen.

  I always try to understand how to create the arrival of my new HARD drive Toshiba Recovery Partition. I do the same thing for an old book, I handled based on something similar to it's original factory State.

  I have reflected on the recovery partition, but does not know how it was created. It is not NTFS. Does anyone have experience in the creation of a Toshiba Recovery on a new HARD drive Partition?

  And the help is very appreciated.

  Thanks and regards,
  Dinesh

  Recovery partition can be created when you use the original Toshiba Recovery disk and install recovery image. Before the partitions to boot OS install will be automatically created, recovery image copied on a recovery and then partition as last step recovery image installation starts.

  A sort of migration of files from one to the other HARD disk is not solution.

  Only for laptop with factory will work and the usable recovery partition.

• Satellite P750-113 in stock to the United Kingdom?

  Hello

  I wonder when it will be in stock in the United Kingdom?
  Can't find anywhere to buy it... only the Satellite P750-115.

  Also wouldn't be worth it to pay extra 100 pounds to get rather than the i5 i7?

  Thank you!

  You have drilled down through the laptops to the toshiba.co.uk to determine if it is on the British market (I think you can also buy them in this case).

  If it is made in the Japan or Japanese substantive content so it may be that he is not for sale. Big camera online sellers are out of stock on the high-end of Canon, Sony, Olympus and Panasonic products

• Satellite P750-A069: stereoscopic 3D causes the shift in 2D mode and web browsing

  Hello

  I just bought my laptop Satellite P750 - A069 6 days.

  (* 1) I recognized a problem is when the stereoscopic 3D is enabled, the web brwsing becomes very slow and I can't scroll to the top or to the bottom of the page easily.*

  * Once disable the stereoscopic 3D, everthing works smoothly and neat.*

  (* 2) 3D button function: I push the button but I do not know whethear, it turns on or turns off, there is no exposes message to the screen such as 3D / 3D out? *
  otherwise I'll take the machine to the service center.

  Best regards & thanks.

  Hello

  I m wondering why do you use 3D when you navigate in internet.

  The 3D button activates and deactivate the 3D vision.
  This allows you to activate the 2D to3D conversion function when Toshiba video Player is running.
  So use it as part of Toshiba Video Player.
  In addition, before using this button 3D, 3D vision Setup should be completed.
  Check the user 60 manual page for more information and how to implement 3D vision!

• Satellite P750 - interference TV when connected to power

  I have a Satellite P750 (PSAY3A - 02L 001) that has a built-in TV tuner.

  Whenever I plug the power adapter into the laptop, it creates interference on TV reception. Without the adapter is connected, the reception is very good. I also checked at the reception of the antenna with a decoder and it is the signal strength of 90 to 100%.

  Help, please! Is this a faulty power supply? Or receiver defective tv? Or a driver/bios problem? Or just a bad design?

  I noticed similar problems on the external monitor, but I have a laptop.
  In the end the issues was grounded.
  Here's a thread on a similar problem with an external display.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=40338

  in this case, the AC adapter cable was defective
  You should also test it could also be that you need a cable 2-pin, so the power adapter is connected to the Earth is no longer.

• Satellite U300 cargo stops when wake up from sleep mode

  My U300 has some issues loading. If I connect the charger mode 'sleep', then wake up the laptop it stops in charge, even if the adapter is still plugged. The battery icon says he's in charge, but the percentage of the battery decreases. And there is no warning when it hits empty, he just cut.

  I think there also the same when I'm in charge it execution state and then switch to hibernation. It does not seem to pay even if the adapter is still plugged.

  To be honest I never noticed similar problems with my laptop
  It seems very strange and here in the forum, we could provide only a few suggestions

  So first of all, it would be desirable to update the BIOS. The update of the BIOS sometimes makes wonders ;)

  What in the Vista update? Do you still run the update of the OS?
  From my experience, Microsoft publishes a lot of hofixes and fixes which corrects several different problems

  Last but not least, we should not exclude a hardware problem.
  In this case, the latter would be the ASP!

• Satellite A200-14F: BSOD when using the FN keys

  Hey all and its not so mind my English.

  OK, I have problem with my laptop its Satellite A200-14F and when I press the FN button for toshiba flash cards, he appears just BLUE screen and it stops my computer!

  ANY HELP IS WELCOME. !!!
  Thanks in advance.
  P.S. I have instaled the new aded value pack and cards flash driver (thast at the start of all the problems)

  Great!

• Satellite P750-0MQ - rocking when civ5 running problem

  I picked up recently that laptop and the pc game only I'm addicted, and until yesterday had fortunately been indulging this vice

  then yesterday during the loading of civ I accidentally hit the eco button as I was brushing a piece of debris on the keyboard. because of the sensitivity of these buttons it turned on eco mode, I turned reflexively he walks back

  Since execution of the civ live x 11 mode, when the game switches between the cut screen, or when I pass on the desktop (which I had done regularly without any problems before), the screen goes black then flashes with a light green a few times before you do what they say

  I tried to reinstall the game and the intel and nvidia drivers without success before making an out of the box restoration as last resort

  After that I updated the nvidia driver to one that is available on the toshiba support page and not the latest version of nvidia itself, in order to maintain the OEM plug, but the problem remains

  I would have updated the display driver intel too, but there isn't one available on Aust. Toshiba site

  also, when he started first to occur, it was only civ related, but then a couple times while windows is loading and once while closing, the same strange thing happened, which increased my concern

  now, having abandoned all that for me is a lot of money on this laptop I'm paranoid I did inadvertently some damage somewhere, as I don't see anything else to try...

  SUPPORT HALP :(

  Hello

  In my opinion it s really strange story to be honest, I put t think damage you something or that the ECO mode could be the reason for this problem.

  Although it would be a matter of setting, this problem should not appear after using the recovery disk. Retrieve redefines the laptop to factory condition so I think it certainly not a setting before issuing.

  You said that the screen becomes black and flashes not only the game Civilization 5 the question seems to appear in other situations too, it would be interesting to know if the same appears on the external monitor
  If the same could not be visible on the 2nd monitor then a graphic problem would be possible

  No matter who, if the recovery disk does not resolve, a hardware problem cannot be excluded, and in your case, I would like to speak to a local Toshiba ASP to determine if it s a graphics card problem.