Stop posting MPA Library choice who use the bus system?
Hello
How can I stop the choice of the library for the 'Guitar' tracks to show patches that use the bus?
(I have a strict methodology for the use of bus).
Thank you very much!
G
[I am a professional producer, at the level of experts, working in executed and electronic genres using hardware and software].
I find it so annoying that I do not use any of the presets in the library. Can you imagine an inexperienced user the parameters of loading and having no idea of what they have just done to their range of mixer? As far as I know, the only way to not show them would be to go through them and clear the settings that evoke buses.
Tags: Professional Applications
Similar Questions
-
My windows Explorer stops working when I try to use the file menu on a file.
My windows Explorer stops working when I try to use the file menu on a file. If a file is selected in a folder that windows Explorer will be display Windows Explorer has stopped working the message box. This occurs only if a file is already selected and you click on the file option in the menu bar. All the other menu items work well if a file is selected or not, and if no file is selected the menu file works fine. I already ran SFC/scannow from the command prompt, but it returns no violation.
Hello
Thanks for posting your question in the Microsoft community forum!
I understand that you are having problems with Windows Explorer. I'll help you solve the problem. To be able to understand the question in a better way, I would like to ask you a few questions.
(1) did you make any changes before the show?
(2) how often does the problem occur?
Method 1:
Step 1: You can check if the same problem occurs in safe mode.
Please follow the link on how to start the computer in SafeMode below.
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
Step 2: Perform a clean boot.
Put your boot system helps determine if third-party applications or startup items are causing the problem.
How to set up Windows 7 to start in a "clean boot" State
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
See also:
Error: Windows Explorer has stopped working
http://support.Microsoft.com/kb/2694911
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Note: Choose a date before that the problem occurred as your restore point while performing a system restore.
WARNING: Perform a restore of the system can change your settings and delete your unsaved data. Do it at your own discretion.
Please let me know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved in Microsoft Windows.
-
My wireless mouse just stopped working. I can still use the mousepad however. I changed the batteries does not. Then I tried another mouse wireless, and it didn't work either. What can I do next?
Buy an inexpensive wired USB mouse for less than $5 and see if it works. As far as I'm concerned wireless mice are more trouble than they are worth. YMMV :-)
Good luck.
-
list of sql-operators, who use the database indexes.
Give a list of the sql operators, who use the database indexes.
I'm interested to know if ' group by '-operator uses indexes.why it has not been used here?
because there is no general rule to that: as stated it depends on table and index layout if the optimizer decides to go to index or not.
-
weakness / strength to use the local system for vSphere services account
Beyond to create Active Directory accounts for the connection of your server vCenter to a SQL remote box, is there a better practical reason to create an AD account to run your services of vSphere?
The default is to use the "Local System" account. Is there an inherent weakness by using the local system account for services such as vCenter, VUM or vConverter?
Hi James. In the service using AD creds accounts can actually be very precarious - a little more info on:
http://articles.TechRepublic.com.com/5100-10878_11-1053581.html (gets interesting about 3/4 of the page down)
http://www.sans.org/reading_room/whitepapers/application/service-account-vulnerabilities_5
Concerning
Owen
If you have found this device or any other useful post please consider the use of buttons useful/correct to award points
-
I'm unable to connect to the internet and I also can not use the WinXP system restore.
No internet connection and I also can not use the WinXP system restore because it gives me an error at the 'end' which said: it cannot be restored to an earlier date. I run AntiMalware bytes and StopZilla and erased all that they found. Now I can't even connect to the internet. When I go to the command prompt, it gives me an error contact the Support of MS that I know means I have a virus or a trojan that I should just get a time out? My other PC on the same network is fine and connected. The NETWORK card is fine, just does not know how to get rid of what it is, I have and to top it all impossible to connect to the internet to try all of the tools that can help. Someone at - it ideas?
The error you get at the end of the restoration of the system is typical of some anti-virus programs (Norton, especially) that interfere with the restoration of the system. Try to start your computer in Mode safe (on several occasions, key to tap F8 while your computer starts) and run safe mode system restore.
Additional information is necessary to treat your network problem. Try to bring up a command prompt (start-> Run-> "cmd") or if it does not, try (start-> Run-> "command.com") and enter the command:
ipconfig/all
and after the info that appears in the State resulting.Also, check the logs of your system related errors (start-> Run-> "eventvwr.msc") and click on 'System' in the left column.
HTH,
JW -
I have a laptop asus F5R model. I use the operating system to windows xp service pack 2, I can't install the audio driver on my knees, please help me
Download and install the last set of drivers (starting with the chipset / driver motherboard) to the ASUS support site: http://support.asus.com/download/options.aspx?SLanguage=en&type=1
J W Stuart: http://www.pagestart.com
-
HOW CAN I GET A HP LASERJET 4V IN ORDER TO PROPERLY USE THE OPERATING SYSTEM TO XP PRO AND USB USING A PARALLEL CABLE?
The printer works at all with this cable?
The cable has recognized and installed by Windows XP when you logged on to the computer?
If the cable has been recognized, what steps have you taken to install the printer then (be as accurate and complete as possible)?
You get an error message? If so, please provide, without paraphrasing.
This printer has already been installed on this computer? If so, with what type of connection?
And especially, what is the brand and model of the USB to parallel cable? Many of them do not work. See, for example, the comments here , which suggests that 25% of the units will simply not work. This seems to be one of these products you should buy at a local store, rather than on the Internet, then you can continue taking it back until you get a working unit.
-
Repeatedly tried to install the upgrade to windows 7 and pure install and get the error message on all partitions available "Setup could not use the existing system partition because it does not contain the required free space. All 3 partitions on a single disk have over 90 GB and separated from the disc more than 65 GB of free space according to the properties of the disk and initial screen during installation. Tried to reformat a partition empty all reinstall Xp sp3 without result. What can I do?
Remove the data cable of all drives except the drive that you want to install Windows 7 on.
Remove all external devices.
Delete all partitions on the disk leave all of the disc as "unallocated".
Boot from the Windows 7 DVD and then install, when you reach the point where it asks you to select a drive, click the "Advanced" option and create a new partition (at least 50 GB) to install Windows and continue with the installation process.
-
When installing win7 ultimate, {install} error message indicates "Setup could not use the existing system partition because it does not contain the free space required... I have 500 GB free, ram 4 GB 2.4 ghz quad... any help?"
If you have any external storage devices such as external hard drive or thumb drive, unplug them, they might interfere with installation.
-
Cannot use the rollback system for non-system tablespace segment ' TEMP
Hello world!
I encountered this error: "cannot use the non-system"TEMP tablespace system rollback segment.
So what I did to check the cancellation stuffs online.
How do I bring them online?SQL> select tablespace_name,status from dba_tablespaces; TABLESPACE_NAME STATUS ------------------------------ --------- SYSTEM ONLINE UNDO ONLINE SYSAUX ONLINE TEMP ONLINE LARGEDATA ONLINE LARGEINDEXES ONLINE MEDIUMDATA ONLINE MEDIUMINDEXES ONLINE SMALLDATA ONLINE SMALLINDEXES ONLINE XSMALLDATA ONLINE TABLESPACE_NAME STATUS ------------------------------ --------- XSMALLINDEXES ONLINE XXSMALLTABS ONLINE USERS ONLINE CONVTABLES ONLINE UNDO_02 ONLINE 16 rows selected. SQL> SELECT tablespace_name, sum((bytes/1024)/1024) free FROM DBA_FREE_SPACE gr oup by tablespace_name; TABLESPACE_NAME FREE ------------------------------ ---------- LARGEDATA 18.3105469 SMALLDATA 10.46875 SYSAUX 106.5625 UNDO_02 67.125 XXSMALLTABS 13.0078125 CONVTABLES 170.039063 MEDIUMDATA 22 USERS 37.265625 SYSTEM 55.875 LARGEINDEXES 30.5175781 XSMALLINDEXES 17.34375 TABLESPACE_NAME FREE ------------------------------ ---------- UNDO 546.9375 MEDIUMINDEXES 33.25 SMALLINDEXES 31.015625 XSMALLDATA 23.6328125 15 rows selected. SQL> select file#,status from v$datafile; FILE# STATUS ---------- ------- 1 SYSTEM 2 ONLINE 3 ONLINE 4 ONLINE 5 ONLINE 6 ONLINE 7 ONLINE 8 ONLINE 9 ONLINE 10 ONLINE 11 ONLINE FILE# STATUS ---------- ------- 12 ONLINE 13 ONLINE 14 ONLINE 15 ONLINE 15 rows selected. SQL> select segment_name, tablespace_name, initial_extent,status 2 from dba_rollback_segs; SEGMENT_NAME TABLESPACE_NAME INITIAL_EXTENT ------------------------------ ------------------------------ -------------- STATUS ---------------- SYSTEM SYSTEM 102400 ONLINE _SYSSMU1$ UNDO 131072 OFFLINE _SYSSMU2$ UNDO 131072 OFFLINE SEGMENT_NAME TABLESPACE_NAME INITIAL_EXTENT ------------------------------ ------------------------------ -------------- STATUS ---------------- _SYSSMU3$ UNDO 131072 OFFLINE _SYSSMU4$ UNDO 131072 OFFLINE _SYSSMU5$ UNDO 131072 OFFLINE SEGMENT_NAME TABLESPACE_NAME INITIAL_EXTENT ------------------------------ ------------------------------ -------------- STATUS ---------------- _SYSSMU6$ UNDO 131072 OFFLINE _SYSSMU7$ UNDO 131072 OFFLINE _SYSSMU8$ UNDO 131072 OFFLINE SEGMENT_NAME TABLESPACE_NAME INITIAL_EXTENT ------------------------------ ------------------------------ -------------- STATUS ---------------- _SYSSMU9$ UNDO 131072 OFFLINE _SYSSMU10$ UNDO 131072 OFFLINE _SYSSMU11$ UNDO_02 131072 OFFLINE SEGMENT_NAME TABLESPACE_NAME INITIAL_EXTENT ------------------------------ ------------------------------ -------------- STATUS ---------------- _SYSSMU12$ UNDO_02 131072 OFFLINE _SYSSMU13$ UNDO_02 131072 OFFLINE _SYSSMU14$ UNDO_02 131072 OFFLINE SEGMENT_NAME TABLESPACE_NAME INITIAL_EXTENT ------------------------------ ------------------------------ -------------- STATUS ---------------- _SYSSMU15$ UNDO_02 131072 OFFLINE _SYSSMU16$ UNDO_02 131072 OFFLINE _SYSSMU17$ UNDO_02 131072 OFFLINE SEGMENT_NAME TABLESPACE_NAME INITIAL_EXTENT ------------------------------ ------------------------------ -------------- STATUS ---------------- _SYSSMU18$ UNDO_02 131072 OFFLINE _SYSSMU19$ UNDO_02 131072 OFFLINE _SYSSMU20$ UNDO_02 131072 OFFLINE SEGMENT_NAME TABLESPACE_NAME INITIAL_EXTENT ------------------------------ ------------------------------ -------------- STATUS ---------------- _SYSSMU21$ UNDO_02 131072 OFFLINE 22 rows selected.
I tried this but did not work for me.
Must I bring each segment online separately? Please guide me.SQL> alter rollback segment _SYSSMU1$ online; alter rollback segment _SYSSMU1$ online * ERROR at line 1: ORA-00911: invalid character SQL> alter rollback segment '_SYSSMU1$' online; alter rollback segment '_SYSSMU1$' online * ERROR at line 1: ORA-02245: invalid ROLLBACK SEGMENT name SQL> alter rollback segment _SYSSMU21$ online; alter rollback segment _SYSSMU21$ online * ERROR at line 1: ORA-00911: invalid character SQL> alter rollback segment SYSSMU21$ online; alter rollback segment SYSSMU21$ online * ERROR at line 1: ORA-01534: rollback segment 'SYSSMU21$' doesn't exist SQL> alter rollback segment '_SYSSMU21$' online; alter rollback segment '_SYSSMU21$' online * ERROR at line 1: ORA-02245: invalid ROLLBACK SEGMENT name SQL> alter rollback segment "_SYSSMU21$" online; alter rollback segment "_SYSSMU21$" online * ERROR at line 1: ORA-30017: segment '_SYSSMU21$' is not supported in MANUAL Undo Management mode SQL> ALTER SYSTEM SET UNDO_MANAGEMENT=AUTO SCOPE=SPFILE; System altered.
Nith
Published by: user645399 on February 23, 2011 14:52user645399 wrote:
Shouldn't have 2 undo tablespace?Is that what you mean?
Yes, above statements completely wrong.
If you use single instance database (non-RAC) and then use an undo tablespace -
computer will automatically connect to IE start up how can I stop this.
When I would use the computer and open IE when I'm ready to use it.
I have a ZYXEL router.
This has happened only since I checked a pop box that says connect automatically very stupid, I know, but now can not cancel.
help please
Hi Tansy,
Thanks for posting your query in Microsoft Community.
I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.
I understand that you want to disable the open Internet Explorer at startup option.
Method 1
Step 1: I suggest to start the computer in safe mode with network and check if the problem persists.Startup options (including safe mode)
http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-modeStep 2: If the problem is solved in SafeMode with networking, then I suggest to perform clean boot and remove the program that is causing the problem.
How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
http://support.Microsoft.com/kb/929135
Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.Method 2
I suggest you run virus scan online by using the Microsoft safety scanner.Microsoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspxNote:
when you do an antivirus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.See also: Stop a program from running automatically when Windows starts
http://Windows.Microsoft.com/en-in/Windows7/stop-a-program-from-running-automatically-when-Windows-startsThanks for posting the results and let us know if you need help to solve the problem and we will be happy to help you
-
How can I stop and then resume when you use the magnetic Lasso tool?
CS4 on Mac. I have some fairly complicated selections to make and the magnetic lasso tool seems a good choice. However: How can I stop and then resume when in use? For example, I would like to zoom, start by dragging along the edge, then stop, move the image to a different area of it is in the middle of my screen, then pick up again where I left.
Hi MarieMeyer,
You can press the SPACEBAR shortcut to activate the hand tool temporarily once you are finished with the selection on a part of the image.
Then, move the image with the key space key and let it continue with the selection by using the magnetic lasso tool.
You can use the SHIFT key to add to the selection by using the magnetic lasso tool.
Kind regards
Claes
-
How to actually use the support system to post questions answers etc.? SOLVED
Recently, I posted a question that caused of Zenos to answer. I tried to answer this question and have no idea if I used the system correctly - it seems that if I replied to myself! I can't work on how to manage screens etc. Does anyone have a simple guide to how it all works, how answer/reply, which means different boxes of... It seems not particularly intuitive. Or maybe it's me?
You clicked on the Post, a button to answer in your post that is a bit misleading, because he cited the post box in response instead of just sending you to the response box as you have been pregnant.
https://support.Mozilla.org/en-us/forums/contributors/710958?last=64260 & page = 2 #post-64218
-
Anyone who uses the VMWare adapter? Do you have suggestions for a connection problem?
I have a connection to a vCenter who works for years. (touch wood). I am trying to add an another vCenter to tide. I use the exact same username and password, but I get an error on the valid username and password.
I tried on 3 different environments of tide. I can connect to the application of vSphere with the exact same username and password that I updated the current and he succeeds, but the tide connection still does not work.
Any suggestions are welcome.
Thank you!
Michelle Morris
I suspect that you are facing a known issue in VMware runtime configuration of the user.
CSCuu49010 - user VMware 5.5 must be created as domain\username.
Symptom: VMware connection is not getting up when the runtime user has domain association Conditions: 1. Create RTU for VMware 2. Specify
You use the areas in your user Runtime used for the new vCenter connection? If so try to remove the domain name from the drop down field and instead specify the user name inand 3. Enter the password for VMWare adapater 4. Now, go ahead and create a new connection for VMware 5. Connection will not be coming up 6. Now, remove the domain from RTU and instead specify the username in format 7. Connection is now up and running Workaround: In the runtime user configuration associated with the VMware adapter, remove domain name from the Domain drop down and instead specify username in format. format.
Maybe you are looking for
-
Why should I keep moving my mouse to play videos with Adobe Flash player?
When I open a video from a website or Youtube, it will not continue to play unless I continue to move the mouse. I use a wireless mouse. Same problem occurs for downloads. If I don't move the mouse downloads freezes. This only happens on Firefox. I d
-
Unable to connect to the internet with Skype using mac
I'm having a problem calling. I get a prompt saying you are not connected to the internet. I am connected to everything except Skype. I used Skype before without problems.
-
LaserJet Pro M127fn MFP: Stuck "print fax page 1.
I had to receive two pages of fax. After that the first page has come through it is stuck "print fax page 1. The second page is never good. I can't print anything. I already disconnected my printer and plugged in. When the rear connection, it uses th
-
Simulation Interface toolkit and MATLAB R2013a
Hello What LabVIEW Simulation Interface Toolkit compatible with MATLAB R2013a? Thank you
-
HP envy 100 D410a cannot replace the paper path door in the printer!
Has received a 'false' paper jam message and followed the instructions to remove door paper to address 'paper jam' path (it wasn't any paper stuck). Now, it is impossible to replace the paper path door. Help! Thanks, Brooklynllp