stop/restart 9i import

Similar Questions

• Dynadock: displays preferences are stored in the stop/restart only

  Hello fans of Toshiba and experts.

  I have a problem with * Dynadock DVI * and laptop computer from a different manufacture (with Vista Enterprise).

  I want to use this combination to eliminate the need for a typical desktop computer in office (without multimedia applications or 3D) environment, where * external monitor is defined as main display *, and * LCD internal as an extension of office *.
  This work of setting as planned, the main screen moves between external and internal monitor according to the (UN) Dynadock connection. However, this behavior lasts only until the stop/restart is performed. Then, the configuration is completely random. In some cases, it works as before, in other cases, the default mode is applied - internal LCD becomes the main screen and the image is mirrored on external monitor.

  The whole situation seems to depend on computer with the Dynadock is used. I found the laptop (also Vista) running solid rock with Dynadock.
  All used the drivers were in the latest versions - freshly downloaded, Vista Enterprise SP1 version of the Dynadock 2.3 software update.
  Is there a way to force Dynadock software to use the built-in views configuration whenever the docking station is plugged?

  Thank you...
  Petr Kopecek

  It could be a display driver problem, have you updated display driver and the BIOS of the laptop?

• My pointer freezes, so I have to stop & restart for 20% of the time. How can I fix it?

  My pointer freezes, so I have to stop & restart for 20% of the time. How can I fix it?

  Hello

  • When the issue started?

  Method 1:

  Step 1: Check if the problem exists in Mode without failure.

  See the article below for Safe Mode steps in Windows XP.

  A description of the options to start in Windows XP Mode: http://support.microsoft.com/kb/315222

  Step 2: If the problem does not persist in Mode without failure, then try to clean boot.  You need to perform a clean boot to find the program that is causing and then disable or remove.

  How to configure Windows XP to start in a "clean boot" State: http://support.microsoft.com/kb/310353/en-us

  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  Method 2:

  Also check the logs in Event Viewer for the recent activity on your computer and check.

  This article describes how to use Event Viewer to view and manage the event logs in Microsoft Windows XP.

  How to view and manage the event logs in Event Viewer in Windows XP: http://support.microsoft.com/kb/308427

• In Windows Mail stop windows mail import my emails

  How to stop windows mail import my TISCALI emailsW

  Go to tools | Accounts and either delete the account, or go to properties and under the general tab, uncheck the box: "include this account...". ».
   

• MESSAGE-ACCIDENT-STOP IN A BLUE SCREEN ERROR. STOPS & RESTARTS CONTINUALLY. WORKS IN SAFE MODE. POSSIBLE SPYWARE WIN32/INFOAXE?

  the crash, blue screen, stop message-0_c0000005, 0_82627f3f, 0_a542991c, 0_a435f91c, 0_00000000.system stop & restart every time in normal mode.these all started after installing microsoft security essnentials.after that windows updates cannot download-display error message-0_80072efe ABORTED.after CONNECTION NETWORK scanning with windows defender spyware WIN32/infoaxe.remove shows all tool windows defender - succeeded.used tdskiller kaspersky to remove the spyware.after restart the system fails to load showing these in blue screen.previously stop message blue screen appeared on occations, but not constantly. Now is the case each time from windows.only can operate in security mode.give a solution for this.i tried several things start: repair, restoration of the system... etc nothing works.when open in restart mode disabled grubbing watch bluescreen stop message with bios check written above errors.also updates, disablwe memory bios options cache or shadowing.whats the solution for this.i uninstalled already expired anti-virus program norton before installing windows security essentials.pls give me some Tips to solve this problem

  I ran tdss killer - find spyware.to malicious delete everything happened for rebooting.system has crushed display blue screen with error messages.could not started at all in the normal mode.i tried several options but nothing has worked. SOLUTION finally solved this problem by reinstalling windows vista with the original product recovery disc.now it works.all started after downloading windows security essentials.after this windows automatic update stopped working.then I ran tdss killer and system crashed.now I purchased & installed internet security 2011 (kaspersky) .then yes gud. I think that reinstalling windows is the only solution to this message of the death of blue screen.

• close the option to stop/restart/switch users is missing from the Start button

  For some reason, I have more option to stop/restart/switch user under the Start button. The lock button is there with an arrow, but the only option under this arrow is LOCK. How do I return these options? The only way I have to shut down the computer now is to use the button on the computer itself.

  Simple terms only, please. I am a newbie of Windows. Thank you.

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner

• Should I stop, restart, or put my computer windows 7 standby?

  Should I stop, restart, or put my computer windows 7 sleep?

  From Internet Explorer

  Original title: closed

  Your IT Department may have requested it.  Call Center in whole (a Walmart old building converted into cabins about 1200), I worked, and we asked our employees to do this at the end of their travel (for restart) the computer would be freshly started for the next user, but not closed down to take more time to connect the next user, or (b) if we can still publish the updates of this because it's ready to receive our software updates as we send them.

  So, I just wanted to say that your employer may have had a reason of this application, which does not apply to your personal computer.

• PC counters each attempt to fix/repair and finally, the loop to stop/restart windows Explorer.

  So beyond, I'm done with this laptop. He started by run me windows update and the awakening of a BSOD. Now browse those tedious threads, I know that the next thing people want are the dumpfiles. Well, you cannot make them because it won't create dumpfiles. I checked everywhere for them and double-checked to make sure that when I got bsod it is correctly configured to do. It will not create them. So ok, the next thing people say is running scandisk Sfc. Nope, BSOD in the course. Chkdsk? Nope, BSOD. during the. This laptop has a coherent dpc latency problem where every 10-13 seconds it stings really high, distorting the audio. I tried to disable drivers, update drivers, pulling on the battery, and it won't go away. To * with it I say, I can deal with that, besides there is probably a hardware problem, it's an old inspiron 5040. The greatest success in fixing something comes sfc running in safe mode with cmd prompt. He got to 100% and has absolutely nothing more. All this stems from the windows updates failed. But this latest issue is the water drop. Before the windows explore stopped working/restart loop, which prevents me from running damn near all executable on ANY startup mode, I was getting semi-fonctionnalites off safe mode with network. I was inside my damndest to try to solve the problems without paying a penny for the repair (because it's my operating system from windows to the 3rd address I got incredibly frustrated with questions and I'm NOT GOING to sink more money into the purchase/solve this *) but after a month of countless BSOD and failed system restore (BSOD on those too) I decided to say the * with it , it can still be used for browsing with chrome at least, since I found a way to activate the sounds of the internet registry. I had used it for about a month and realized that internet Explorer was causing in fact a kind of conflicts, because all applications requiring an i.e worked incorrectly, display of white windows resources that need to be pulled with knowledge then I tried to reinstall that is and makes the mistake of restarting, forget the automatic Windows Update. Well, I is none of that with this time and tried to turn off the pc before it started with nothing else than a glorified blue screening method. To restart, I got "windows is the restoration of changes", another reboot, then a "Welcome" I get started in the regular office, (not safe mode or anything like that) and he gives me a small white window with "custom settings" on it and literally nothing else. No toolbar, no desktop shortcuts. Wait a few seconds and I get "Windows Explorer has stopped working" and the option to close the window. safemodes boot loop to stop/restart windows Explorer and I can't do anything appear the Task Manager which is pretty useless, because I can't really do anything here except close programs that are not accessible in the first place. Safe mode only I can enter is the one with the command prompt. I don't really know what else to do. Quite happy to take a hammer and break the laptop for parts. There are so many problems with this thing, I doubt that someone will be able to help in any way especially withouth minidumps the BSOD. But if there is something simple that I'm missing for at least the minimum functionality that I was getting out of it until windows update in ruins me, feel free to try to solve the problems. The code the most common bsod I get is 0xf4. I put my money on half of the problem with the hard drive itself and the rest of the question was any other defective hardware. But ill be doomed if I buy another harddrive just to have more questions.

  Hello

  Generally, this problem is caused due to hardware or software related issues. As you mentioned that you have completed the restoration of the system and sets the Explorer loo, I would like to know if the problem is resolved or not.

  Regarding performance related questions, I would suggest trying the following methods and check if it works for you.

  Method 1:

  Try the procedure described in the following Microsoft Help article and check if that helps. This Microsoft Help article consists of the steps to optimize Windows to improve performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  Method 2:

  Put the computer to boot and check if the problem persists. This troubleshooting will help you find what third-party program or the app is the cause of this problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135 
  Note: After the boot minimum troubleshooting step, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Please reply with the status of the issue so that we can better help you.

• How can I stop WMP to import .flv files?

  Original title: How can I stop WMP to import .flv files?  Windows media player is important all my .flv files, but when I try to play Windows Media Player currupts and stops working.

  I deleted the video files .flv twice, but Windows Media Player import again.

  Hi Ellen,

  1. have you plugged an external storage device which Windows Media Player attempts to import? Where exactly that Windows Media Player, try to import files .flv?

  2. you have any third-party media players installed on the computer?

  Windows Media Player cannot play the FLV files. You will need a third party FLV player to play these files, or you will need to install the latest pack of codecs on your computer. If the installation of plugins did not help, then try searching on the Internet for the codec pack.

  Check this link for more information:
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information helps.

• How to start/stop/restart tools in CentOS

  Hello

  So I have VMware tools installed in Centos.  I know that it starts by itself.  How can I start/stop/restart manually it?  I looked in /etc/rc.d/init.d and I can't seem to find the script.

  Thank you!

  Eric

  Try:

  /etc/vmware-tools/services.sh restart
  

• Force the print to stop/restart spooler service when it does not

  Our office has a HP plotter, where the driver (note that we have the latest version, directly from the HP site) seems to cause the print spooler service becomes out of order sometimes.  In turn of the programs (including AutoCAD and Outlook) to lock, as well as windows, as the dialog box, which causes devices and printers.

  If I restart the 'Services' print spooler service in computer management, it goes back to work at least some time - if at least I can work around the problem.  It is important to note however, that even by using this method, it throws a dialog box error saying that the service failed.  But since this is a question with all facilities of this liner installed with Vista, I need to have a method easier to use of the service is restarted.

  I wrote a file .bat base with a net stop spooler command followed by a net start spooler command, but the problem is that, unlike with computer management, net stop does not seem to force the service to shut down if it does not, and I can't find a way to force the stop command.

  Is there a tool more powerful/switch available that I could script so that users can easily stop and restart the spooler service when it does not?

  Thank you

  Type sc /?

  --
  ..
  --
  "mgarrison" wrote in message news: d3d768a8-126-b-4246-a4d8-ca6d8f4db6a7...
  > Our Office has a HP plotter, which the driver (note that we later
  (> version, directly from the HP site) seems to cause the print spooler
  > service becomes out of order sometimes. Which causes in turn of programs
  > (including AutoCAD and Outlook) to put him away, windows as the
  dialogue of the RHS.
  >
  > If I restart the spooler service for printing of 'Services' in computer science
  > Management, she goes back to work for at least some time - if at least I have
  > can work around the problem. It is important to note however, that even
  > by using this method, it throws an error dialog box saying that the service
  > did not. But since this is a problem with our Vista
  > facilities having this installed plotter, I need to have a more
  > user-friendly method of restarting the service.
  >
  > I wrote a .bat file to base with a net stop command spooler followed by a
  > net start spooler command, but the problem is that, unlike with a computer
  > Management, net stop does not seem to force the service stops if it is not
  > answer and I cannot find a way to force the stop command.
  >
  > Is there a tool more powerful/switch available that I could then script
  > users can easily stop and restart the spooler service when it is not
  > sensitive?
  >
  > Thank you

• Compaq presario cq5320y stop, restart immediately

  When I stopped, it closes windows 7 Home premium and restarts immediately. The only way to stop is to force with start button on computer, or pull the plug

  To open the BIOS Setup utility, turn on the computer and immediately press the F10 key repeatedly, once per second, until the opening of the BIOS Setup utility screen.

• How to stop mail to import the old emails after installation of El Capitan

  I have the e-mail program on my iMac that is linked to an account hotmail before El Capitan I could open a mail and click 'x' at the bottom of the e-mail window main to prevent downloading of emails on the linked account. The 'x' is gone and everytime I open the mail it starts downloading emails from 4 years old I want not downloaded on my computer. I like having the configuration of the e-mail on my desk so I can send a quick message without having to open the hotmail acct but don't need or want messages from this account to automatically start the download/import. I went into the preferences of mail and changed the check for new messages in manual, but it always starts download/import as soon as I open the mail. It's like a race for me to get my outgoing message composed and sent, so I can leave mail as quickly as possible to try to minimize the number of old emails this import in the program. Any help would be greatly, greatly appreciated. I want to keep synchronized on the e-mail account, just use it for outgoing messages sent. Is this possible?  Why they did eliminate the option in the main window to stop the import? Very frustrating. :-(

  Hotmail has recently changed from POP to IMAP initially. These changes (and others) are because of that.

• WHEN YOU IMPORT PHOTOS FROM DISK HARD EXT, 92 000 IMPORTED OK, THEN HE STOPPED WITH MSG: IMPORT REVIEW: COULD NOT PERSIST MASTER, EXCEPTION CODE: EXC_1386_GPFLT.  STILL HAVE 50,000 PHOTOS TO IMPORT.  NEED OF HELP AND ADVICE.

  Can you please help me with importing photos from an external hard drive.  92 000 images transferred, then import stopped with the message: IMPORT CRITICISM: THE PERSISTER MASTER FAILURE.  EXCEPTION CODE: EXC_1386_GPFLT.  A lot of pictures in the last implant, but was very blurry.  The 92 000 that has been imported successfully are very clear.  I re-tried the import process is the same.    could answer you to * @aol.com

  How the photos were initially stored on external drive? This software has been used?

  What software is used to import the photos?

  Really not post your e-mail address here on these public forums where she can by harvested by scammers. I asked that Hosts change for you protection.

• can't stop/restart to load the update

  Since the upgrade to El Capitan 10.11.1.  Impossible to make a stop down or restart to load the new updates. Force quit does not load the update

  any help would be great

  MacBook Pro (retina, mid-2012)

  2.3 GHz Intel Core i7 processor

  8 GB 1600 MHz DDR3 memory

  see you soon

  Rick

  I don't quite grok what you say.

  You can force stop the machine in now the power button for a period extended, say 10 sec or so to force a shutdown.