stop the update of tablespace

Similar Questions

• My computer stopped the update since October 23, 2010, and whenever I try to check for popular update, I get the number of error code 80070490. Help, please!

  My update of the computer window stopped updating since October 23, 2010 and each time I tried check the update popular I get the error code 80070490. Help, please!

  Hello

  questions have already been addressed here in my 1st reply:

  Please read the answer given

  Here is the solution for your problem of MS

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• stop the update media library

  I bought a new computer with Windows 7 and WMP 12.  How can I stop function 'update library'? It interrupts the songs and slows everything down that I can't really use my computer except in order to listen to music.  Even when I disconnect from the internet it still works.

  Hello

  You can try following steps provide by Diana D in this link: http://answers.microsoft.com/en-us/windows/forum/windows_7-pictures/how-to-stop-updating-media-player/fb239eab-8f68-40ee-9b6c-384fad1caa7c

• The Mediam player constantly updated from Windows: unnecessary files, creating unnecessary playlists and double and no way to stop the updates.

  Upgrading to windows 7 and unfortunately found with the latest version of media player. Here is a short list of what I need fixed (because I can't come back until I have decide of windows 7 is just as useless):

  1 player constantly updates whenever the program is opened (not even try to play a song or whatever it is, it starts). This creates files garbage off all, I mean ALL media files in all my shows. the first open I found myself with 2 700 new titles prior to this, all were games or software sound effects. I tried all the options of the user for what this is about updating and stop anything that even resembled an auto-update feature (although nothing seemed really appropriate).

  2. the update also adds auto-playlists, but also of new playlists 'trash' to my normal playlist section who have no related audio files or some effects files above game/software.

  3. it adds not only my multimedia player, but apparently my global media 'profile,' like the first time I went to update my itunes started all these files garbage pulling himself into thinking they were WMA to convert.

  4. the mini player mode needs an option "opacity" so it doesn't go away in circles when I don't have my mouse hovering over him.

  5. attach your download links for skins/visualizations, etc. I used the direct link for something that might not have the opacity of the skin problems regular mini Player and ended up with a file that has frozen on the media player. After using System Restore, I tried another skin on the direct link is a media player and got the same result. I gave a third try (after restoring again) and got the same result. Nice link/beta test...

  Moreover, to use this computer to the direct sound, so I need a little my files, clean, organized, and without all the garbage you are dull upgtade is cramming my complete with hard drive. Thank you...

  Hello bouttokillbill,

  Thank you for visiting the Microsoft answers Site.

  When you start Windows Media Player for the first time, it automatically searches certain default folders in the library music, pictures, videos and recorded TV.  If you add or remove files from these libraries, the Player automatically updates its available media files.

  For more information about adding items to the Windows Media Player library, see the link below:

  Add items to the Windows Media Player library

  To view the folders monitored by Windows Media Player, click on organize: manage libraries in the Windows Media Player menu.

  You can also submit your comments for Windows 7 to the address provided below:

  Windows 7 comments

  I hope this information is useful.

  Thank you, Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I get photoshop 12 elements to stop the update?

  Photoshop elements 12 updates and random moments, it takes 30 minutes and I cannot perform any other task until its done. I would have preferred it asks me if I want to update and gives me the option to know when its done.

  The update to each launch refers to the watch folder when a search is performed for the new or changed pictures that may need to be added to the catalog. It is possible to stop the service.

  Click the Windows Start button and go to the control panel

  Check if the Active File Manager is running. If so, you can choose the shutdown option.

  Control Panel > administrative tools > Services

  Adobe Active File Monitor V12

  Note: once the service is stopped, the record shows no longer works and you will need to manually import the Organizer.

• Command line option to stop the update at startup?

  We have a shortcut on the desktop to access webmail server. (Firefox is the default browser.) When Firefox has updates available, the link fails with a message of network downtime, which connfuses users. Y at - it an option to command line, I can add to the shortcut to prevent the update at startup of Firefox?

  http://developer.Mozilla.org/en/docs/Command_Line_Options

• How can I stop the update KB2644615 to come back?

  Vista Home Premium 64

  KB2644615 was part of a weekly update on 10/01/2012. I was able to install all other 14 updates that came with it, but it goes through the motions, then update fails and comes back. I'm now stuck in a loop. Please help me.

  Thanx. Don

  [Moved from Internet Explorer - browser version: IE9]

  Hello

   
   
  Follow these methods mentioned below and check
  
  Method 1: Follow the steps mentioned in the article below, which deals with a similar question.
  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358
   
   
   
  Method 2: Follow the steps in the following articles.
  The problems with the installation of Vista updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files
   
   
   
  Method 3:  You can temporarily disable your antivirus and then try to download and install the update.
  Disable the antivirus software
  

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  
   
  Now, you can try to download and install this update manually.
  Update security for Windows Vista (KB2644615)
  32-bit - http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=28656
  64-bit - http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=28696
   
   
   
   

• How can update Windows stuck at 60%, I stop the update?

  My windows Vista machine was an automatic update and made 60% 3/3 and was stuck there for hours.  I tried to shut down the computer and restart it normally and the restart mode safe and still the screen only I see once the machine booted is 60% complete.  What can I do to overcome this?

  Hello

  You can try the following steps and check if it helps.

  Step 1:

  You can read the following article and try the steps.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  Step 2: When you're able to start normally, check the history of update to discover the update has failed as a result of the article:

  See the Windows updates are installed

  Step 3:

  If there are updates failed, then try to download and install the stand-alone package with updates from the Microsoft Download Center.

  a. to download updates from the Microsoft Download Center

  b. Enter the item number in the field search and download the same.

  c. double-click on the downloaded file.

  d. click on run and follow the wizard to install it.

  Hope this information is useful.

• my iPhone stopped the update of mail 6 days ago

  After works very well, my iPhone stopped to get new mail 6 days ago and somehow think it's OK. I get the message "update" on Sunday after her "research" even if today is Friday. No error message.

  Even if I did not change any password, Miss me my gmail mail and my workstation (Exchange). I even re-entered passwords now just in case there was a glitch of the gods, and it will always be not all new mail.

  Thanks for the tips!

  • Tap Settings > Mail, Contacts, calendars.
  • Press the email account.
  • Press to delete the account.
  • Add your account again.

  Get help with Mail on iPhone, iPad and iPod touch - Apple Support

• High CPU discovered Norton because "Windows Update". I've done everything I can to stop the update of windows, but it continues to be

  It makes my computer virtually unusable. Help! Disable windows update in Control Panel does not help

  Hello

  1 did you changes to the computer before the show?

  Method 1: Disable Norton and check if there is no improvement in the performance of the computer.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  If the problem is resolved with disable norton, I suggest you contact Norton support for assistance about their virus protection software.

  Method 2:

  Step 1: Verify functionality in safe mode.

  http://support.Microsoft.com/kb/315222

  If it works fine in safe mode, try to perform a clean boot by using step 2.

  Also perform a virus scan using Norton antivirus application.

  Step 2: How to perform the clean boot.

  http://support.Microsoft.com/kb/310353

  NOTE: Once you check the functionality, follow the suggestions under steps to configure Windows to use a Normal startup state.

  See also these articles:

  Difficulty of Windows system performance slow computer problems
  http://support.Microsoft.com/mats/slow_windows_performance/en-us
  Slow PC? Optimize your computer for peak performance
  http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=1vrPRuhAhAg

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  I hope this helps!

• Stop the updating of the region (report) when you press the button

  Hello
  
  I created a report region, using the select statement:
  

  select * from TABLE(CAST(JCMS_MERGE_BATCHES_PKG.show_merged_batches_fn('M29||0') AS jcms_rep_batch_type))

  Is there a way to stop this submission report when you press a button on my page?
  
  The reason for this requirement is that my report contains checkboxes for each returned row. The default value for the checkbox control is CHECKED when the report is refreshed. However, I would like users to uncheck some lines in the report, click a button and have a treatment performed on ONLY the checked lines. My page almost works, but because the report is refreshing, after I completed my treatment, the report is back with all lines in the selection again.
  
  Thank you very much
  
  Paul

  I think that your condition is similar to the following:

  http://HTMLDB.Oracle.com/pls/OTN/f?p=31517:219

  However, it is not trivial.

  Denes Kubicek
  ------------------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  ------------------------------------------------------------------------------

• Creative cloud does not, refresh can not stop the update, can't do anything

  

  Stuck like this for days. Cannot click on anything. (X) does not work.

  Hi Jacek,

  Please contact the customer service.

  Kind regards
  Rahul

• Update Windows (vista OS) never finished the update and keeps looping back to step 3.

  Windows Update was updated and the system was arrested by mistake.  When the system is turned back on, the update process began in stage 3, goes to 50% then completed, he stops, stops, restarts and returns to step 3, States repeats the process over and over again in a loop.

  What are my options?

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista
  x 64 64-bit.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• Since a week everytime I turn on my laptop there is a update that takes at least 20 minutes, after the update is finished, he won 't restart. Restart repair, take another twenty minutes or more. Why is this happening?

  Is it possible to have the updates everytime I turn on my computer, it happened six times in one day. Help, please

  Hello

  More than likely that you have one that is stuck.

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• MS Explorer began to install the two updates when I was closing. Install the other ran all night. How to remove the update or complete? __

  Ideasms you have any problems with

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  He's still trying to install? If so use the below, if not you can HIDE it from Windows Updates - right-click on LEATHER.

  Then, you can download it from the Download Center and try to install it. Of course, be sure that you really need the
  Update.

  MS Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.