Command line option to stop the update at startup?

Similar Questions

• I get an error message saying: "command line option syntax error. Type the command /? assistance. "

  I'm running Windows 8 preloaded on Sony Vaio and when I try to install the latest update for Atheros Bluetooth Driver Quelcomm, I get an error message saying: "command line option syntax error. Type the command /? assistance. "

  Help, please!

  I followed your instructions, I did not read the comments below first, I change the TEMP and TMP to C:\Temp, it's ok to forget it or do I needed to switch back? But I forgot to copy the original. If I need to change it back, can give me the original code to stick it on the TEMP and TMP, I use Sony Vaio sve14128cb WIN 8.1. Thank you for helping me.

  Dear all,

  I got other way to solve this problem, and it was mentioned by Mr. Vijin.

  If I'm not mistaken, the error message will be show after you go to update your driver Qualcomm Atheros Bluetooth Vaio update version.

  My way is very simple and maybe you can give it a try. Just go to the Google Web site and key in the version that you want to update. Please select the site Web is Sony's main page.

  Or you can visit the official site of Sony for your country, go to 'Support' and key in the version on the area of research and research.

  You can try link below also but I bother it's a newer version for your computer.

  http://www.Sony.com.SG/support/download/554324

• Running a Seq file when running the GUI (command line option) return an error

  Hello

  I use a LabVIEW based UI to run/execute a file in sequence by using the command line option. My command line is "Test DUT' D:\QF\GUI-test-Sequential.seq D:\QF\GUI-Test.exe - runEntryPoint

  When I ran the get 3 popup saying that some of the perameters 'is not a valid file of LabVIEW"(see attachments). No idea how to avoid these messages? (The user interface works very well and runs the entrypoint of the USE Test)

  LabVIEW 8.5

  TestStand 4.1

  Thank you.

  Hi Tom,

  When you create a new application to your specification to Build, you must set the 'Pass all arguments for application command line' in the Advanced tab.

  Once you do that it should all work.

  Concerning

  Ray Farmer

• I would like to know the command line options that are available to mspaint. I in bulk of images, I want to open in paint and then save it in jpg format in the paint.

  Hello

  I would like to know the command line options that are available to mspaint.
  I in bulk of images, I want to open in paint and then save it in jpg format in the paint.
  I want a script batch for the above procedure. Can anyone suggest me the script to do the same.

  Thank you
  Bodin

  original title: ms paint command line options

  Neither Windows XP nor paint offers all these capabilities.

  "BinduS" wrote in the new message: * e-mail address is removed from the privacy * _xp...

  Hello

  I would like to know the command line options that are avaulable to mspaint.
  I in bulk of images, I want to open in paint and then save it in jpg format in the paint.
  I want a script batch for the above procedure. Can anyone suggest me the script to do the same.

  Thank you
  Bodin
  - http://answers.microsoft.com/message/04b8dfae-1fa5-42db-81c2-b042652ecfc8
  Meta tags: images; windows_xp

  Tuesday April 10, 2012 08:23:14 + 0000: CreateMessage BinduS

• command-line option syntax error type command /? help

  Whenever I have try and download updates, the following message is displayed with a ' syntax error type command-line option command /? help "but when I type the?" / key nothing happens?

  I had the same problem, even in the guidelines recommended by microsoft, faild, but I solved it

  go to google and put

  Download (pilot saw issue and the version of the driver) and download it manually on sony.com and install good luck

• Setting up command line options Toshiba VAP - Support Button-

  Hello

  I need to configure the button Support drivers for laptops of the Portege series as part of the deployment of Windows 7 x 64 bit Enterprise on the following models: Z830, Z930 and R930.

  I need to install Toshiba value added package with Flash card option only.
  What command line options are present to do that?
  I'm looking for it deploy through SCCM.

  Thank you

  Hello

  My knowledge of the value of added Toshiba contains various simple applications of Toshiba. These applications must be installed one after the other.
  You will need to run the setup.exe / installation.exe for the procedure to start the other options are not known to me

• Microsoft visual C++ 2005 SP1 Redistributable Package (x 86) Command line option syntax error.

  Original title:

  Microsoft visual C++ 2005 SP1 Redistributable Package (x 86)

  When installing AutoCAD 2012 to my freshly installed Windows 7, I get the error:

  Microsoft visual C++ 2005 SP1 Redistributable Package (x 86)

  Command line option syntax error.

  I'm working on Lenovo laptop, with x 32-System.

  Please, try to solve this problem with me.

  Hello

  Sorry for the delay in response.

  If you are still having this problem then you can take a look at the following link and check if that helps.

  https://support.Microsoft.com/kb/952211?WA=wsignin1.0

  If you need help you can also post your question here:

  https://social.msdn.Microsoft.com/forums/vstudio/en-us/home

  Thank you.

• Ciscosecd PAD command line options

  A happy person can advise this as the function of the

  '- a' and '-r' are running/opt/CSCOcsa command line options

  /ciscosecd? No information is provided for operating instructions.

  A last discussion with a proponent on this issue:

  -a normal start from East

  -r is for automatic restart after an exception is caught (and is used when "ciscosecd - a" meet a signal of Linux in a collision, it is restarted with - r)

  Scott

• Notepad.exe command line options

  Is there a list of command line options available for notepad.exe?

  I would like to use Notepad to view only with no options, read only fashion, without file options.

  There are, but a game limited command line options:

  • /A Open file in ansi mode
  • / W Open the file in unicode format
  • / P print file name
  • /PT print filename designated printer

  There is no switch to turn off the functionality of file menu.

  Tom Ferguson

• What is fledge command-line argument to control the graphics acceleration?

  Is there a command line argument to control the graphics acceleration for a JDE 5.0 Simulator?

  I would like to switch off in the command line so I can add it to the Simulator Run Eclipse IDE and the debug configuration.

  I checked their moult imaginal/Help and I have not found any that I could see that it works.

  Thank you.

  The settings are stored in a file located at

  \Documents and Settings\ [windows login name]\net\rim\fledge-2\fledge-saved.conf

  At the bottom of the appearance of file for the line:

  4
  

  Change the number 0 for no acceleration.

• How to re - activate option to check the updates in 11 Acrobat?

  I had that, until the time I was using Acrobat 10.xx until a few weeks back - recently purchased a license for version XI and the deployment has been listened to my computer by my company of departmental it through Microsoft Software Center. After the upgrade I don't see the option to check updates on any menu. I tried a repair and a re - install as well, but nothing is. How can I reactivate the option to check the updates?

  Thank you
  Satya

  Check if you have bUpdater set to 0 in

  HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Adobe\Adobe Acrobat\11.0\FeatureLockDown

• stop the update of tablespace

  Hello!
  
  I need to stop the update of a tablespace:
  
  I have Oracle 10 g R2 10.2.0.4
  
  I created a large Tablespace of 1.5 TB.
  
  I've expanded the datafile up to 2.5 TB... How can I stop it? is it possible to stop this change, because it takes WAAAAAY long! It has been more than 1.30 hours and it still works!
  
  Any help? Thank you!

  Phelit wrote:
  I thought... but the tablespace will always be compatible? I'm afraid that it will ruin the original datafile.

  ROLLBACK will be held at DB startup

• Error: no 1639 invalid command line argument. Consult the installer of Windows S

  Hello
  
  I am trying to install Oracle 10 g Express on Windows XP SP3. A few seconds after clicking on 'Install' in the Summary window, I get the following error message:
  
  "Error: no 1639 invalid command line argument." Check the kit of development Windows Installer by using the detailed command line. »
  
  
  Anyone know what to do?
  
  
  Peter

  Please go through the following link (does not directly apply in your case).

  http://support.Microsoft.com/kb/326027

  HTH...

• are there options of command line for wuapp.exe (windows update)?

  I have some Vista virtual machines set up to perform specific tasks, then stop - these VMs run at specific times, as if a physical computer running, ran a task, then stop.  I want to be able to automate the Vista updates without having to manually open each VM on a weekly basis.  Are there options for command line for wuapp.exe so that I can program the virtual machine to turn on, install updates, and then click Stop again?  Or y at - it another way to accomplish what I'm doing?

  Thank you

  Hi Prisoft,
  
  Welcome to the responses of Microsoft Vista Forums!

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.
  http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro/

  With regard to:

  Divya R -Microsoft Support

  --------------------------------------------------------------------------

  Visit our Microsoft answers feedback Forum and let us know what you think

• 0xc000000e - Windows Home Server 2011 - how to open the repair or the command line option

  Hello

  I currently have the problem that my Windows Home Server 2011 stops booting with the 0xc000000e error code.

  Of course, I searched the web and found the following article:

  https://support.Microsoft.com/en-us/KB/2261423

  Can I boot from my installation DVD. "Windows loading files.

  While two options:

  -new installation

  -repair

  I click on repair. The next screen prompts to choose a restore image. ???? No other options or possibilities. No command line, nothing.

  OK boot with F8. Start menu. No repair option. Only "safe mode with cmd. Tried this. Then download the same GUI as before. Same two options. No CMD and taxation not possibility to use STARTREP. EXE.

  Any suggestions?

  Thanks in advance.

  Alexander

  Hello

  Your question is beyond the scope of this community.

  Repost in Windows Home Server Forums.

  https://social.Microsoft.com/forums/en-us/home?category=WindowsHomeServer

  See you soon.