Stopped point on the pad digital work - any fix?

Similar Questions

• Printer stopped printing, but the other functions work

  I have a 1536mfp that has worked very well for many years... no problem.  I installed a second printer about two months (Officejet Pro 8620) for printing of color presentations... no there was no problem until last week when the 1536 stopped printing.  A few times I turned it and turn it back on and it would print.  Then it stopped printing completely.  I've replaced the USB cable in case that's the problem.  I checked the ports and they work.  I can scan my computer the 1536, but when I print... nothing.

  I updated the drivers to check to see if this is the problem.  I've uninstalled and reinstalled the printer... but so far nothing has worked.  Anyone has any ideas at this point?

  Thank you

  CJM111

  I tried the first option and nothing... I thenk tried the second and found several files in that location as... I deleted these files and followed your direction; tried to print... nothing... got nothing else that a warning light flashing... off the printer, then turn it back on and deleted printing only and reproduced the document and WOW! It worked!

  Thank you for taking the time to help.  He appreciates a lot... quite frustrating when something works so well for so long and then nothing.  Have a great day.

  CJ M111

• laptop stops shortly after the start, but works well in safe mode / command after chkdk or ckdsk/r

  Problem 1: There are months, my two year old Toshiba Satellite L655 s5096 started losing charge the battery even when it is plugged.
  Sometimes, the problem was solved by using a different wall outlet. I replaced the battery, but eventually the problem comes back.

  Problem 2: at the same time that the problems loading starts, Windows has stopped booting normally. Sometimes repair or restoration leads to a normal start, but sometimes I run Chkdsk/r (Chkdsk sometimes the only works [!]) Mode through safe mode w/Command Prompt.

  Problem 3: There are two days of problems 1 and 2 reappeared, but a few minutes after that Windows starts, my machine stops, even if I am able to run Wndows in Mode safe mode w/network.

  I am correct in surmising that this isn't a motherboard (hardware) problem? I don't really want to have to replace this machine if I don't have to. Is this a Windows problem? Upgrade to Windows 8 would solve the problem? Or is it the result of the virus that escaped my Avast scans?

  I'll install Windows 8 when I checked my automatic online data storage works.

  Hi Denise,

  Thanks for posting your question in the Microsoft Community forum.

  I understand that the computer shuts down shortly after starting. I'll help you with this problem.

  1. what security software is installed?

  2. are you sure the workload problem is not limited to a faulty wall unit?

  3. have you checked with the manufacturer of the computer if it is not a battery problem?

  To resolve this issue, let us try these methods:

  Method 1.

  You can create a new power plan and check if that helps.

  Power plans: frequently asked questions: http://windows.microsoft.com/en-ca/windows7/power-plans-frequently-asked-questions

  Method 2.

  Keep the battery power: http://windows.microsoft.com/en-ca/windows7/conserving-battery-power

  Method 3.

  You can remove the battery and connect the power cable from the wall cabinet and check. If the computer does not stop after the restart, then it might be a problem with the battery.

  For any question related to Windows, please do not hesitate to contact us and we will be happy to help you.

• Z830 - pad digital satellite on the external keyboard does not work

  Hello

  I tried to get an external keyboard (USB) to work with my Z830 running Win 7 (64-bit). I've tried three different keyboards to USB in ports and also a wireless keyboard.

  The keyboard works fine, but I can't the numeric keypad right of the keyboard to work.
  It allows me to move the screen IE when the NUMLOCK is turned off but when the NUMLOCK is turned on, it does nothing.

  I looked in the bios and changed the parameters relating to the features of legact and also the numlock option, but to no avail. The numeric keypad on the keyboard worked on other machines.

  Any suggestions greatly appreciated.

  Thank you

  Ash

  Hello

  I'm not quite sure that all this, but my hypothesis is code KBC m is missing in the BIOS.
  Satellite/Portege Z830 keyboard does not support keypad so maybe that's the reason why the numeric keypad on the keyboard can not be activated.

• Specify the end point for the digital using an output circular buffer

  When you use DAQmx and a NOR-DAQ for issuance of a digital signal using a circular buffer (buffer Renault). The program works and works, but when the 'DAQmx Stop Task.vi' function is called to end the task, he stops at the output buffering as soon as it is called and does not wait until the buffer pointer reaches the final value in the buffer. I would like that the program to wait until the buffer pointer is on the last value in the buffer, does anyone know how to specify this setting?

  If you need to stop on exactly the last sample output you will need a way to trigger the stop in the material.  The options available to you will depend on what hardware DAQ, you use, but here are some possibilities on the top of my head:

  1. set up a digital output redeclenchables task finished (not all hardware supports).  Set up a counter of output to issue a periodic trigger with the necessary synchronization signal such that the end result is a "continuous" digital output without interruption.  When you stop your loop, stop the task of counter - digital output ends his generation but the trigger signal will be removed and so it will not continue after that.

  2. If you have an unused extra digital output line, add it to your task.  This line should exit 0 all except the last sample.  Physically, this additional digital line in a wire line PFI and use it to trigger a meter output.  Have the output counter generate a single pulse of some long-term (long enough to ensure that the software can respond prematurely).  Use the output from the task of counter as a trigger of break for the task of digital output.  Do not start the task of the meter until you leave your loop.  Do not stop the task of digital output until you have detected in the software that the meter has been triggered.

  If you need to stop on approximately the last sample output, you could query the TotalSamplesPerChannelGenerated property after leaving your loop and only stop the task once it reaches a multiple of the size of your circular buffer.  This is no guarantee that it stops on the last sample (if you use a device on a bus with a latency higher as USB or Ethernet the non-determinisme would be worse).

  Best regards

• Why my GPS stopped suddenly when the location and the surroundings have not changed work?

  Why my GPS stopped suddenly when the location, a framework and the weather conditions have not changed work?

  Ros

  iPhone 4S OS 9.2.1

  Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You won't lose data by doing this, but it can cure a few glitches.

  If this does not work and to rule out a software problem, set it back to factory settings, without using any data backup later. Test the phone and if the GPS works again, restore the backup.

  If the GPS does not work after the factory reset, it is a hardware problem, and Apple has to repair the phone if GPS can be fixed.

  In the case where it cannot be resolved, it could offer to replace the iPhone 4s, if you are willing to pay the price for the refurbished phone.

  Out of warranty repair service

  If your repair is not covered by Apple limited one-year AppleCare warranty + or AppleCare Protection Plan, your iPhone may be eligible for out-of-warranty service. For example, the liquid damage is not covered by the warranty, but may be eligible for out-of-warranty service. Some damage is not eligible, for example, if your device has been broken into several pieces. See the terms of repair of Apple and Conditions for more details.
  Read the terms of Apple repair

  Model	Out-of-warranty service fee	Battery service *
  iPhone 6 s more, iPhone 6 Plus	$329	$79 * available only if battery Apple diagnostic test failure
  iPhone iPhone 6s 6	$299
  iPhone 5, iPhone 5, iPhone 5	$269
  iPhone 4S	$199
  iPhone 4, iPhone 3GS, iPhone 3G	$149

  In addition, a $6.95 shipping charges if necessary. Fees are in US Dollars and exclude tax. The price is for the service through Apple. The final service charge we charge will be determined during the tests and may be less than the costs of service above. Pricing and terms vary for the service by an Apple authorized service provider.

  copied from: answer Service Center - iPhone

  
  

• El Capitan stop built into the optical drive to work?

  Hi people

  I hear and read that El Capitan stop construction in the optical drive to work? I don't know if it's true, and other bugs. I remember when I upgraded to Yosemite this happened to my mac mini, and the super drive was not recognized. However, it was fixed. Although I used to be able to run when any player with the mavericks, but Yosemite has changed all that.

  In any case I had to go to Yosemite, and I'm not sure whether for now, if it's going to ruin my drive and other things. I have a 2012 end pro MacBook. Everyone has problems, or advice to share, or stick to Yosemite.

  Sorry for this Question, it's just that I'm not sure on replacement after hearing this.

  Concerning

  Cap

  N ° as always do a backup in case the new version does not meet expectations. If you are happy stick with Yosemite.

• Despite indicating to the path, still have manually pointing DLL every time LV works using the library function node call

  I use the node of the library function call in LV 8.6. I checked the path to specify the box diagram and made directly in the DLL file that I use. Whenever I have started with Labview, I have to go to the diagram and physically find the DLL in one of my calls to make it work properly. Once I have do this everything seems to work as expected. Anyone else see this issue? Any suggestion would be appreciated.

  Thank you

  Steckman wrote:

  I use the node of the library function call in LV 8.6. I checked the path to specify the box diagram and made directly in the DLL file that I use. Whenever I have started with Labview, I have to go to the diagram and physically find the DLL in one of my calls to make it work properly. Once I have do this everything seems to work as expected. Anyone else see this issue? Any suggestion would be appreciated.

  Thank you

  Probably that DLL does not depend on other DLLs that reside in the same directory you point to in the configuration node dialog box call library. What is happening is this:

  Without going into this directory:

  LabVIEW applications Windows to load the DLL, Windows detects that it needs to load other DLLs and can not find in its standard search sites:

  (1) already loaded into memory

  (2) in the application directory (where the exe that began the current process resides in the LabVIEW IDE would be where is LabVIEW.exe)

  (3) in the system directory

  (4) in the Windows directory

  (5) any directory in the PATH environment variable contains

  (6) in the directory 'active '.

  Because Windows cannot find a person to load DLL he abandoned the main DLL loading and returns an error to LabVIEW.

  Now, you go to the configuration dialog box and point to the DLL. The dialog box browse file in LabVIEW uses the standard OS dialog box and this dialog box has the behavior obnoxious always update the "current" directory in the directory where a file got selected in. LabVIEW sees now that the path has "changed" and asks again to load the DLL. Yet once, Windows detects that it needs to load other DLLs too for this DLL but this time going over the search order, it will actually hit the DLL in the same directory and that's all fine.

  It is certainly NOT a problem of LabVIEW. LabVIEW does not and should not really need to know that a DLL needs other DLL loaded and more importantly should never try to think he can do better than Windows, it probably could, but is simply not his task of dependency DLL loading.

  It is your responsibility as a programmer and user of this DLL to know its dependencie, and if you did not write the DLL, to hit the original on his head programmer, if it has not documented these dependencies and make sure that these dependencies are actually properly resolved for Windows placing them in one of the places mentioned above

  ((2) is generally the best location for applications applications because it will not pollute the Windows directory or the user of the application system and 5) is the best for the development machine as you can add a directory to your PATH environment variable where you put the dll you need to develop a specific application.

  Rolf Kalbermatter

• Change the stop character doesn't seem to work

  Hello world

  I hope that this will be a quick fix and I'm just on something stupid!

  In short, I'm doing a LabView program to control a pump syringe via RS - 232. I use a Keyspan USB serial adapter to connect my laptop to the device. After a repair on my own, I was able to download a program HyperTerminal and can communicate with my well pump (change of position, speed, during initialization, etc.). However, when I try to do the same thing with LabView, nothing happens.

  First of all, I can say that LabView sends my pump data, because the light on the USB-serial adapter flashes quickly once (its indication that it comes to Rx/Tx). The same thing happens when I communicate with him via the HyperTerminal program. He seems to be in working condition.

  After a lot of reading posts on this forum and developer of the examples, I think that the problem is to send a character of endpoint with my data string. For example, when I have the program HyperTerminal open, I can enter "/ 1ZR ', which will initialize the pump. That move the pump to its original position and prepares for further information. When I go into the properties of "stop character" in this software, it is said: '13,10"(with the quotes). As far as I know, 13 in decimal is a return carriage (or 0xD hex) and 10 is a line break. I don't know if it sends them both. The company says that my program does not work because my LabView program is probably not send the right stop character.

  I tried almost everything I can think of to change the stop character. I know that the VISA VI set up the Serial Port uses the same settings as my COM port shows when I open Control Panel (9600 baud rate, etc.). I had a big bang and thought that maybe I should check MAX and see what his settings are... they are the same. HOWEVER, when I open the "VISA test Panel" on MAX for my COM port, under "Settings/o", the stop character is set to line feed \n. I have change to \r carriage return, but when I click on "apply changes", I get this:

  SET to 0xD stop character
  No error

  And when I close the Panel test and re - open, always back to \n line break. I also tried to change the setting of "tank of termination" in the VISA set a Serial Port to a constant (as a 13) or control (which I tried like 0xD hex as well as 13 decimal).

  I'm fairly convinced it's the issue... If anyone has any idea on how I can force it to use a carriage return? I even tried to disable 'enable the separation tank' and manually compose a string with a \r at the end, but it does not work either...

  I have attached a photo of a simple VI which shows what I want to do (the 2000ms waiting was put there just so that he would not close the COM port before initialization completed... its useless I think).

  Thanks for your help in advance!

  B

  The stop character with the definition configuration function has absolutely nothing for adding a character of termination in writing. Look at the advanced example for how to do it. In addition, if you want to do with the string you enter, you must activate '-' code display. It is a right click option.

• I tried the clean boot and now the hard drive works simply and screen went black. The mouse still moves around the screen without any outher work keys? That is what it is?

  I tried the clean boot and now the hard drive works simply and screen went black. The mouse still moves around the screen without any outher work keys? That is what it is?

  Hello

  You will need to reverse the clean boot, as it is either incidental compared to
  the real cause of the problem. What, where you try to fix initially using the cleanboot?

  You can access Mode safe? Repeatedly press F8 as you start? If so you can try the configuration - control panel
  The Device Manager - graphics card - Double click on - driver tab - click the driver UPDATE - then
  Right click on the device and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure) is
  CTRL + ALT + DEL and the processes tab find EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Don't forget to make a good backup or
  3.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can do a repair installation that needs to save the data, but you will
  to reinstall the programs. This also requires correct Vista disks especially for OEM versions. You
  will need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - enter a bracket )
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• White screen at the Vista start up... only the mouse pointer, loading the driver freezes on crcdisk.sys loading, sfc/scannow does not work...

  Hello
  I don't know if this is the right place for this post... Sorry if it's not! I had looked online if anyone has the same problem to me, I found similar problems, but not the mine one (but if there is, can you please give me the link?).
  I have a DELL LATITUDE D830's with a dual boot (Ubuntu and Vista). When I run Vista I get the Windows logo and then a black screen with only the mouse pointer.
  Keyboard does not work. I can move the mouse, but can not select anything. No work of Ctr + Alt + Delete.
  I can just turn off the computer. At first I need to press F8 to choose something otherwise I get the black screen.
  If I reboot requesting the automatic restoration of the PC that he asks me the account and work only account is mine a (no administrator available). He then suggested to contact the administrator. I checked the error report and nothing is reported: the system works.
  I have no previous configuration to restore.
  I can access the command prompt. So I tried to write sfc/scannow. The answer is that to complete the process requires to restart the computer and make again sfc/scannow. I restart again, the new order, but I get the same answer...
  When I get the black screen, CPU is not disabled, because after a long time (about 2 hours) the computer restarts itself... If something happens even if I don't know what!

  The only thing I have not tried is to restore Vista from CD... I'm really afraid that this could remove the partition, or crash at startup I have, by removing access to Linux!

  I have a backup of all my files, so no matter if what I have to do to cancel my files, but what I really need is to keep Linux operating.

  So, if you have any suggestions... I'm not good at using the computer, so, please, a solution step by step be really appreciate it!
  Thank you very much

  Paola

  PS No peripherics are connected, the wireless is disabled

  Hi seymar,.

  I suggest that you run a tool to restart system on the computer and check if it works.

  If you have a Windows Vista installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  1. Insert the installation disc.
  2. restart your computer.
  Click the Start button, click the arrow next to the lock button, and then click restart.
  3. If you are prompted, Press any key to start Windows from the installation disc.
  Note If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change the BIOS settingsfor your computer. For more information, see BIOS: frequently asked questions. 4. choose your language settings, and then click Next.
  5. click on repair your computer.
  6. Select the operating system you want to repair, and then click Next.
  7. in the System Recovery Options menu, click Startup Repair.
   
  Check out the link for more information below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  If the previous step fails then I suggest that you run CHKDSK on the computer to check if there are any errors on the hard drive.
  1. Insert the installation disc.
  2. restart your computer.
  Click the Start button, click the arrow next to the lock button, and then click restart.
  3. If you are prompted, Press any key to start Windows from the installation disc.
  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change the BIOS settingsfor your computer. For more information, see BIOS: frequently asked questions.
  4. choose your language settings, and then click Next.
  5. click on repair your computer.
  6. Select the operating system you want to repair, and then click Next.
  7. in the System Recovery Options menu, click on the command prompt and type chkdsk command-line /f and wait until the scan is complete and later to restart the computer and check what is happening.

  For more information please visit the link below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Tried to copy a data disk to another disk using Power2Go received message Power2Go has stopped working any suggestions?

  Tried to copy a data file to another drive using Power2Go disc.  Received message that Power2Go has stopped working any suggestions.  I tried to uninsall the CyberLink program and reinstall from Recovery manager.  I have a HP with Windows 7 Home Edition computer.

  Hello

  1. were you able to burn the disc before using this software?

  2. you remember to make changes to the computer before this problem?

  3. are you able to burn the disc using Windows Media Player?

  Look for error messages in the event viewer for detailed error information.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Follow these methods.

  Method 1: Check to see if you can burn the disc using Windows Explorer

  Burn a CD or DVD in Windows Explorer

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

   

   

  Method 2: You can perform a clean boot that allows to check if other services third party is causing a problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Please note: after troubleshooting, make sure you start the computer to a normal startup mode.

• How can I activate the scrolling of the effects? I get "to activate scrolling effects your page must use a unique fixed stopping point." How can I do this?

  I have tried several things to enable scrolling of the effects, however, I can't seem to make it work. I get the message ' to activate the effects of scroll your page should use a unique fixed stopping point. " How can I change this so that my tab scroller are available? It's my first week using Muse, so I am very familiar with the software.

  Thank you!

  Hello

  is that you have already looked at working on the site so please be sure 2 things to activate the effects of roll for the site.

  1. There is only a breakpoint in the page as shown in the screenshot below.

  

  2 right-click on the breakpoint bar and select 'Breakpoint properties' and select 'Fixed width' instead of liquid.

   

  In case you are starting from scratch then be sure to select 'Fixed width' at the time of the creation of the new site.

  

  Kind regards

  Vivek

• HP Deskjet 845c stopped printing in the middle of a job and don't print any more

  My deskjet 845c was printing fine and then suddenly stopped printing in the middle of a page. The power light is on and steady, and the orange light blinks.  I can't print at all at the moment.

  I followed the troubleshooting listed using the HP diagnostic Print and have removed and cleaned the ink cartridges, but the orange light still flashes.

  Any help you could offer would be greatly appreciated.

  Thank you.

  It seems that one of your cartridges has failed.  I don't remember if the printer Deskjet 845c is printed in reserve with a deleted cartrdige mode.  If you then remove the cartrdige color and try to print a test page.  If this works the cartrdige of color was at fault.  Otherwise then reinsert the cartrdige color and remove the black cartrdige and print a test page.  It worked?  If so, the black cartrdige is at fault.

  If the printer will not print with a cartrdige deleted then I would replace the black cartridge with a replacement fee.  My experience suggests that the black cartrdige is usually the culprit...

• How can I set at the point when the [key does not work because I have a German keyboard?

  Hi, I'm new to CS6 and worked through the book of Adobe After Effects. Some of the shortcuts do not work for me, probably because I use a German keyboard. In Chapter 11, I have problems because I need to select a layer, go to a specific time and then set to the point, but the [key does not work. Does anyone know a German equivalent or another way to set the point to? Otherwise, if I look at the colored bar in the timeline representing the layer that I want to put a point, can I get the same effect by dragging the edge of the colored bar until I reached the time limit? Or that fails to preserve the relationship of all images existing keys, etc. that I have implemented for a layer in a way that the [key would be? Grateful for any advice.

  Shift + o/a, o/a and so on. Also kann man mit Sttrg + shift + D die ebony einfach und den Teil parts, den man nicht parish, löschen. Ansonsten einfach evil die die Shortcuts.txt Datei deepening und oder das KeyEd Up Script dafur use squad.

  Mylenium