BFCP of MCU for encrypted calls

Similar Questions

• Is it possible to join/merge two conference calls in MCU for one call in the same MCU

  Situation - endpoint is part of two meetings of MCU (with one call on hold).  I want to merge these two meetings to the MCU.  Is there a way.  MCU is 45xx series and this is a deployment of VCS - MCU.  Thanks in advance.

  No way to merge that I know, I've had similar scenarios and there is no automatic way to do it, the Conference, the participants will have to unplug one and join the other.  Multiway will not work because that is intended to the unique endpoints being transmitted to a MCU, no MCU is not lift themselves.

• Highway X8.2.2, Changing default SIP Port for B2B calls is not possible

  Much of community support.

  I 10.5.1 (SU1) of CUCM and X8.2.2 Expressway.

  I have configured without VPN Jabber and B2B based on the Document calls "CVD-CollabEdgeUsingBE6000 - Apr14.pdf.

  everything worked fine for months, but after the upgrade of the X8.2.2 Express way B2B calls are no more work.

  After troubleshooting, I found the following:

  the DSF Guide tells me to change the default Port to 5061 to 5560 B2B calls because 5061 is also used for the integration of Jabber.

  When I look at my record of wirekshark I see cucm tries to connect to the port 5560 expressway, but after sending a SYN packet, cucm receives a RST packet.

  When I change back to the port of 5560 to 5061, everything works well again for B2B, but of course encrypted calls Jabber connection is not possible more.

  for me, it looks like a bug, but I found nothing on the 'Bug search' tool.

  I also tried to disable all Protection rules and I also have a firewall rule for Port 5560. I also tried to change the TCP Port to something different, 3999 for example. All this without success.

  Just a little look in the guide.

  Two caveats. First thing the guide explains unencrypted SIP - TCP connections, if you want to be aware that both sides use TCP or TLS. If you are using TLS certificates must be good as well.

  5560 isn't a port on the highway, this is the port for the trunk on CUCM.

  What do you see CUCM sending to Highway: 5560 Setup is not ok.

  The port of the highway will not be changed.

  If you look at page 30, he 5560 port is used for the "incoming Port *" and the bottom of page 31

  You can see that it uses the Expressway IP with port 5060.

  On the highway, you configure the area to port 5560 (page 34)

  And of course the firewall should also be ok.

  Please note messages posted under the stars below and set the thread if it's an answer!

• "waiting for encrypted google" does not allow me to open a Web site

  When I try to open lifenews.com, which I visited many times, there is a message saying left down "waiting for encrypted google." I don't even use google chrome? I don't know where to go to get rid of it, I don't want nothing blocked unless I specifically ask to be blocked. I did the research, said it's a blur, said another security settings to uncheck the ssl2 and ssl3. Nothing works. Can someone tell me please how to remove this thing waiting for encrypted google.

  You said blur, which is an add-on. Use the blur, or any extension of similar content filtering? If you think one of them might be the problem, you can test Firefox Safe mode. It is a standard diagnostic tool to disable extensions, hardware acceleration, and a few other advanced features of Firefox.

  Does not work if Firefox: Hold down the SHIFT key when you start Firefox.

  If Firefox is running: You can restart Firefox in Mode safe mode using either:

  • button "3-bar" menu > "?" button > restart with disabled modules
  • Help menu > restart with disabled modules

  and OK reboot.

  Two scenarios: A small dialog box should appear. Click on 'Start mode safe' (not update).

  Any improvement?

• I use my iPhone 6 very often to my office for phone calls.  This will help overall battery life to stay connected as I have all these phone calls?

  I use my iPhone 6 very often to my office for phone calls.  This is my work phone.

  This will help life battery together if I keep the phone plugged in my phone calls?

  Thank you

  SUSE, you can use it while connected and in this way when you unplug to get somewhere, you know you will have a fully updated beautiful upgraded battery.

  Just don't leave it plugged constantly all the time — weeks or months.  A battery lithium needs periodically some running through it.  But certainly leave it plugged during the day of the company while using it, or even just for long calls will do no harm.

  Battery life is determined by the cycles, so if this reduces the rate of your phone through equivalent full charge and discharge cycles it can not hurt self-help (depending on how you use it, it cannot help battery life much either, but it probably won't hurt it).

• Why can I not hear my 6plus iPhone calls after loading the Apple Watch? If I don't answer the iPhone instead of the Apple Watch for incoming calls?

  Why can I not hear my 6plus iPhone calls after loading the Apple Watch? If I don't answer the iPhone instead of the Apple Watch for incoming calls?

  Hello

  It can help to cancel your iPhone in a Bluetooth headset pairing, if it is currently associated with it.

  -On your iPhone, go to: settings > Bluetooth > tap the info "i" beside your headset > tap Forget this device.

• Can I use my Portege R500-121 3 G for GSM calls

  Hello

  I have TOSHIBA Portege R500-121 3 G.

  Can I use my TOSHIBA for GSM calls and if SO what software do I need?

  Thank you

  Hello

  No, you can t make GSM calls.
  You can only use it for a data transfer.

  If you want to make a call, you need an internet connection and could use a software like Skype for example.

• Today, I discovered that this Apple store charged me $5.98 for something called Viber credit pack! It is shown on my bank account that itunes charges. What shoul

  Today, I discovered that this Apple store charged me $5.98 for something called Viber credit pack! It is shown on my bank account that iTunes charges. The option to request the password is already enabled in my iphone, but it did not my password confirmation before that happened. What should I do?

  The best thing and the first thing you need to do is contact Support iTunes.

  They will be able to help you with this and he reimburse you if it wasn't a purchase that you have wanted to have.

  Here is the link to itunes support!

  https://www.Apple.com/support/iTunes/contact/

• Skype is the best software for video call

  Skype is the best software for video call

  I want your opinion please answer Yes or no

• Who holds the keys for encryption AES mentioned in the table under "security and features iCloud?

  Who holds the keys for encryption AES mentioned in the table under "security and features iCloud?

  Article

  Security and privacy - Apple Support Overview iCloud

  has a useful table in the section entitled Security and features iCloud.

  The table shows the types of keys used to secure the different types of data.

  Apple holds these keys as it may be requested of Apple by third parties?

  Hmmm... You definitely raise a good and valid question to which I don't know the answer to, but if I had to guess, I would say that no one.  Would this be possible?  I know I've heard Cook mention that they "don't hold the keys" but does the same thing, it refers?  It would make a very interesting topic of discussion.

• El Capitan: macbook pro encryption self started after the update to iTunes on 11/12/16.  After restarting the computer open to grey screen asking if I wanted to use ICloud password or logon password updated.  I don't want / need for encryption I do?

  After update iTunes on 11/12/16 my computer restarted "grey screen" and required a password for encryption.  He encrypted then my MacBook Pro (10.11.2) in addition, the iTunes update has 'lost' My Playlists, and 90% of my purchases.  Apple Care level 2 could not find them!  They appear in my account, but not in my iTunes.

  1 can I fully encrypted computer?  Otherwise how can I UN-encrypt?

  2. How can I get my old, entirely organized iTunes back?

  Thank you

  File Vault encryption is a security feature. Olny you know if you want or need it. I don't use it.

  To remove the see of

  Use FileVault to encrypt the boot on your Mac - Apple Support disk

  You can re-download most of iTunes purchases by:

  Download after purchase from the App Store and iTunes Store iBookstore

  It appears that there is a problem. This happens a few times. If you have a backup yo can restore from the backup

• HP 240 G4: driver needed for encrypt/decrypt PCI controller

  Hello, I want to install drivers for the products HP 240 G4 (M8X89LT) and I can't find the driver for encrypt/decrypt PCI controller, I use windows 7 64 bit and looking for help here on the Board. Thanks in advance.

  You are the very welcome.

  Try the driver directly from Intel.  Accept the agreement, download, unzip and run the setup.exe file or use browse it to the method of file unzipped driver to install the driver.

  https://Downloadcenter.Intel.com/download/24892/Intel-TXE-Intel-trusted-execution-engine-driver-for-NUC5PGY-NUC5-x-py

• Search for a caller vi

  can someone let me know how to look for a caller to vi. IE I have abc.vi and I want to know what other vi call this abc.vi. How can we find out who called abc.vi?

  Thank you

  What is while a program is running, or while you develop? If it is running the calling chain will return the list of calls. Note, however, that this applies only to a specific bifurcation of this VI.  For a VI to be called more than once at the same time, it must be reentrant. If it is as you develop, go to the menu. Select view-> VI hierarchy.

• Error when you try to use VoIPBuster to place VoIP calls: Client for VoIP calls has stopped working. Windows is checking for a solution to the problem.

  Client to make VoIP calls

  I recently started having problems, make VoIP calls from my computer.  I use VoIP Busters (and using it for a few years without any problems).  Evertime I try to call the destination phone rings a couple of times and then stop.  The next thing that happens is an error message that says: "Client for VoIP calls has stopped working.  Windows is checking for a solution to the problem.  It is followed by another screen that says: "a problem caused blocking the program working properly."  Windows will close the program and inform you is a solution available. "  Nothing happens.  How to overcome this problem.

  I finally had to resort to the re-installation of Windows.  This solves the problem.  But don't forget to back up your computer and email address / addresses before you do.

• BlackBerry Z10 well defined, I can't get the phone to ring and vibrate as the default value for all calls. I can put individual contacts, but I want to ring and vibrate for all.

  Although the value, I can not phone ring and vibrate as the default value for all calls. I can put individual to vibrate and ring contacts and it works but I want as the default for all incoming calls. Any help would be appreciated, thanks

  Sorry, I found the answer in the manual

  "Change your ringtone, sounds or alerts.

  GoTo settings\notifications to the bottom of the screen select application\phone

  You can activate vibrate out there, put the ringer default etc.