Stor.e steel USB 3.0 1 TB 2.5 "and Windows 7

Similar Questions

• Problem with external hard drive 500 Gb Stor.e Steel

  Hello

  I ve bought a Store.e steel 500 GB external hard drive and I can't get large files (such as 4 GB) it wit. There is a message that says that the file is bigger that the system supports whenever I try to get a file of 4 GB, but I have 300 GB of free.
  What evil?
  Thank you

  I agree with user Stephen.
  The file format of HARD drive seems to be FAT32, you must format the HARD disk to NTFS to be able to manage files over 4 GB.

  Welcome them

• my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7

  my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7

  He ran once before, one of my suggestions of solution was the coil (?)  was incorrectly, but don't know how to adjust it

  Hello
  (1) have you made changes before the start of this issue?
  (2) what is the exact error message/code?
  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print. If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, Spooler subsystem or spooler resources, you might need to change and then restart the print spooler service on your computer.

  To do this, we recommend that you save your work and restart the computer to restart the print spooler service. If you do not want to restart the computer, try these steps.

  To change or restart the print spooler service

  You must be logged on as administrator to perform these steps.

  a. click the Start button, Control Panel, click System and Maintenance and then click Administrative Tools.

  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. right-click on the print spooler service and then click Properties.

  d. on the general tab, next to startup type, make sure that automatic is selected.

  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Additional reference:
  Open printer troubleshooter.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
  Let us know if that helps.

• I would like to know how to install Windows Server 2008 and Windows 7 Enterprise from a USB key, please.

  I would like to know how to install Windows Server 2008 and Windows 7 Enterprise from a USB key, please.

  I'm not trying to run either on the USB key, I just need to know how to install from a USB key. I tried Multiboot, grub for DOS and other, but they do not seem to work :/

  I am going through a book that uses these two to form Microsoft MCITP: Server 2008 Administrator and if I could install these Via USB, this would save my records and a lot of hassle... basically just for convenience, as everything that I need will be on a stick * lol *.

  Otherwise, I'll have to use discs instead :)

  Take a look at this:

  http://www.Haiders.NET/post/installing-Windows-Server-2008-from-a-USB-Flash-pen-drive.aspx

  Like to make a bootable USB with WIndows 7, take a look to use the following:

  Download Windows 7 USB/DVD tool

  http://store.Microsoft.com/help/ISO-tool

• I downloaded Sierra.  Installation failed saying corrupted download.  App Store still says downloaded, but there is no button install and I can't download it again.

  I downloaded Sierra.  Installation failed saying corrupted download.  App Store still says downloaded, but there is no button install and I can't download it again.

  What should I do?

  Hello volvoxc70,

  I understand that you have downloaded macOS Sierra, but are not able to install it, because you are told that the download was corrupted. In a situation like this, the next step would be to remove existing installation application download and re - download.
  

  Applications downloaded from the App Store: click on the Launchpad icon in the Dock, hold the application icon until all the icons begin to jiggle, then click on the button to remove the application. If you later want the app, you can reinstall it on the App Store.

  OS X El Capitan: install, update and uninstall applications
  https://support.Apple.com/kb/PH21867

  If you do not have Launchpad on your Dock, you can access your Applications folder in the Finder menu reach > Applications. Once in the application, find install it macOS Sierra app, click once to select it, open the file menu > move to the trash. You will need to enter your administrator password to perform this operation.

  See you soon!

• Hello! I bought an i phone 6s in Latvia at a store like euronics, but I will come back to Italy and I would like to know if I'll be able to use it... Thank you very much

  Hello! I bought an i phone 6s in Latvia at a store like euronics, but I will come back to Italy and I would like to know if I'll be able to use it... Thank you very much

  If it is not a carrier locked iPhone you can use it anywhere.

• One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. The location is the root (2 ports) USB hub: 1-unknown device and Port 2-not used

  Original title: USB device not recognized

  Over the last 2 weeks, I get a message on a USB device.  The message said that one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.  The location is the root (2 ports) USB hub: 1-unknown device and 2-unused Port.  I have no idea what it means.  I hesitated to first click the icon (it does not last very long) thinking it could be a scam.  Can someone help me?  Thank you.

  Hello

  (1) is the specific question of specific USB devices?
  (2) did you of recent changes to the computer before the show?
  (3) have you tried plugging the USB stick on another computer?

  (4) what is the brand and model of the computer?

  I suggest to refer to the following methods and check if it helps to solve the problem.

  Method 1: Hardware devices do not work or are not detected in Windows

  Run Microsoft Fixit mentioned in the article.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: USB Port may stop working after you remove or insert a USB device

  http://support.Microsoft.com/kb/817900

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 How to back up and restore the registry in Windows

  Reference:--

  Advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/kb/310575

• one of the usb devices attached to this computer has malfunctioned and windows does not recognize it

  I get the following message when I join my computr "one of the usb devices attached to this computer has malfunctioned and windows does not recognize," my nokia C3
  kindly help

  Most often when a device is not it's because of a driver.  Try reinstalling your.

  It works for win 7 & 8

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• USB modem stop working after long time and I have to unplug then plug it in again, I want to solve this problem without unplugging and plug?

  USB modem stop working after long time and I have to unplug then plug it in again, I want to solve this problem without unplugging and plug?

  Hi ahmedman_10,

  ·         You follow the steps in the article of my previous answer?

  Follow these steps in my previous answer and at the same time this article, follow these methods.

  Method 1: Follow the steps in the article.

  USB port may stop working after you remove or insert a USB device

  Method 2: Update the latest drivers for chipset.

  How to manage devices in Windows XP

  For reference:

  Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?

• Why am I suddenly "USB not recognized, one of the devices USB has malfunctioned and Windows does not recognize"

  Hi all. If anyone out there in Cyber Land can solve this problem for me so I've personally you will issue an eight-pack of ice-cold beer (or a bottle of wine for the ladies lol)...

  I'll try not to waffle too guys, so here's...

  Right my PC running Windows XP. I also have itunes installed on my PC (I have an iphone 4). Upward until yesterday my iphone and itunes were working well, (once I plugged my iphone in the itunes USB port recognised that my iphone was plugged and synchronization was fine etc.).

  But now when I plug my iphone to PC to sync with itunes, I get a pop up box on the lower right part of the screen that reads... "USB not recognized one of the USB devices has malfunctioned, and Windows does not recognize."

  After visiting about 5 different sites now "Ways to solve this problem", believe it or not, I still have the problem bloody! :(

  A site proposed shutdown PC and unplug it from the power supply, then plug it back start-up and back... this as did not work!
  The other they say that I should go to Device Manager, uninstall all the USBs then restart... it did not work either.
  Tried a system restore
  Tried to reinstall itunes

  When I check the names USB in Device Manager, there is one who reads unknown device. I am literally pulling what's left of my hair now. I tried to solve this problem for almost 2 days now and still no joy. That's why no matter what input you guys would be very appreciated. I'm no PC Wizard, so please, don't think you're patronizing me if you break down things step by step for me.

  Thank you comrades, cordially, Freddy frustrated. :)

  Another said I should go to Device Manager, uninstall all the USBs and restart.

  Usually, this works... but can be very dangerous, unless you have a PS/2 keyboard.

  I also assume that you have tried all other USB ports on the computer. tried a verified USB device (for example, a flash drive) in the USB usually when you plug in your iPhone. and I tried your iPhone in another computer (I know it's rare for an error message Windows really means what he says, but sometimes the material lacks).

  Is the charge of the iPhone when it is connected to the USB port (I don't think)?  This happened to me recently, but a reboot fixed it.  I guess that that happened to you.

  I guess that you don't see the error messages in Device Manager or you must declare them.

  You can uninstall all USB devices that do not exist as follows:

  • Open a command prompt window (start > run > cmd > OK)
  • Enter the following command and press enter

  Set devmgr_show_nonpresent_devices = 1

  • Start the Device Manager by typing the following in the same command prompt window

  devmgmt.msc

  • In Device Manager, click the view menu and select "Show hidden devices".
  • You should see a category just after "Non-Plug and Play drivers" named "other devices."  Chances are that there will be a big exclamation yellow mark beside it.  When you expand the "other devices" you should see several non identified "USB devices."  Uninstall all this.
  • Reboot (with the iPhone NOT connected).

• Error - "one of the usb devices attached to this computer has malfunctioned and windows does not recognize it

  Original title: USB device not recognized / dysfunction

  "Unrecognized USB device".
  One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. Help for this problem, click this message. »

  This is what I get AFTER that I had to reinstall windows XP because a virus has attacked my computer a little before avg and Microsoft security essentials picked it up and destroyed... I have reinstalled twice... then I changed discs since I have two... well, I get this message from my 2 external Seagate Freeagent and my Phillips mp3 go gear aria... player these devices work on the laptop from my friend and she is under vista. It seems that since then they have worked on my computer before they would always run. My mouse and my cam work fine and my Canon printer gets thus detected... a few readers who have the space that is made... Ive looked everywhere for a solution... even upgraded windows media 11 and is player went to service pack 3. restarted several times... tried dPower Management tab and tried to

  Open recognition of the USB device by using Device Manager.

  .. I am at a loss: P please help thanks!

  isable the power management of the USB hub and I couldn't find the

  Hi LadyDefi,

  You can try to uninstall and reinstall the USB controllers and check:

  To remove and reinstall all USB controllers, follow these steps:

  a. Click Start, click Run, type sysdm.cpl in the Open box and then click OK.

  b. click on the Hardware tab.

  c. click the Device Manager button.

  d. expand Bus USB controllers.

  e. right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  f. restart the computer and reinstall the USB controllers.

  g. plug in the removable USB storage device and test to make sure that the problem is solved

  For more information, see the following article:

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error "one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it." when you connect Logitech M225

  Original title:

  My wireless mouse works fine for the last 2 months, now, all of a sudden it doesn't work at all.

  I get a windows notification that says-

  "One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it."

  I have Vista 32 bit OS on my laptop.

  My office has Windows 7 32 bit and I am able to use the mouse on this computer, then the M225 is not defective.

  I tried to look for a download of update on the site of Logitech & only found:

  6.32.20 set - point it did nothing to help.

  I also tried to move the receiver to the other 2 ports USB w / still the same results.

  Are there other downloads or solutions that will help w / this problem?

  You can also try searching for devices strangers (with yellow symbols) in the Manager under the mouse devices and other pointing devices and other devices (if any). Right click and uninstall unknown devices. Then restart.

  Also try the steps below to reset the power of USB:
  (a) the laptop off, unplugged from the wall outlet.
  (b) remove the battery for a few minutes, then reinstall it.
  (c) then restart the laptop.

• Unknown device message to an external hard drive USB... supposed to be plug-and-play

  I have a Western Digital external hard drive, 1 TB, I installed a PCI 2.0 card when I couldn't device works.  This has resolved nothing.  When I attach the hard drive, it does appear a message that says that the device is unknown.  I don't know how to fix the problem manually.  I contacted western digital, but be plug-and-play they provide drivers for their products and have referred me to your website.  Please help, its nothing more than an expensive paper weight at this point.

  Hi mgregurich,
   
  I suggest you try the following steps:
   
  Step 1: Find the error code in Device Manager

  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in Device Manager, look for the USB device, and then double-click the device name.

  3. under the gaze of general tab for the status of the device for any error code indicated.

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors
   
  Step 2: Run the fixit provided in the link below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Step 3:  Unplug the power and USB (universal serial bus), wait for a while and connect the external hard drive to another USB port and check.
  Also, connect the external hard drive on another computer and test if it works fine.

  If the problem persists,

  Step 4: Replace the USB controllers.

  First of all, please disconnect all USB devices and then perform the following steps:

  1. click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

  2. in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  3. Repeat step 2 to uninstall all items under 'USB Bus controllers'.
   
  Then, restart your computer and windows vista will automatically reinstall all USB controllers.

  If the problem persists, please contact western digital for assistance.
  http://support.wdc.com/

  Thank you, and in what concerns:
  Ajay K
  Microsoft Answers Support Engineer
  --------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• USB device not recognized. -"peripheral USB attached to this computer has a malfunction and Windows does not recognize it."

  My phone displays a warning that a "peripheral USB attached to this computer has a malfunction and Windows does not recognize it." I uninstalled the only devices that I had (printer and bluetooth) but still this warning. Can anyone help.

  Mike S.

  I suggest to take a look at the following Web sites and follow their advice:

  http://support.Microsoft.com/kb/871233

  http://support.Microsoft.com/kb/310575

  http://support.Microsoft.com/kb/314464

• Help me to solve the problem with modem hspa usb on Windows Vista and Windows 7

  Hi, I have a problem with my USB HSPA modem when I tried to install in my Windows Vista 64 - bit PC. Sometimes it's OK, but sometimes it has encountered an error trying to install it. After the installation of the almost complete progress, reports of windows as "Unknown material" or "driver is not found. Maybe after a few tries, I was able to install the modem. But later, its happened again. I take the modem at the other PC with XP, it is still OK, but it happened again with Windows 7 Ultimate 32-bit home version. so could you help me to fix it? is it a bug of Windows Vista and windows 7? Thank you very much

  Hello

  go to the website of modem manufacturers and look for the last vista and/or firmware for windows 7