Stor.E TV + firmware

Similar Questions

• Toshiba Stor.E TV + Wireless Network Connection does not work

  I can't transfer files from my desktop PC to the Stor.E via the wireless network. I use a USB WiFi dongle with a Toshiba label thereon, such as provided by Amazon when I bought the Stor.E and I had a lot of trouble so he could connect despite the strength of the signal being 7 of 10 bars.

  I now get linked and read directories right on the PC but when I try to transfer a file transfer 1% (he said) of the file and then hangs until, presumably, it expires a few minutes later and told me then the USB WiFi dongle has failed. However, according to the network set up it is still connected.

  I tried to access the interface of Samba using 192.168.1.9 port number, which is that of the Stor.E, and by using a browser on the PC and all I get is a page that shows a simple example of HTML + CGI - that is the Samba interface?

  Anyone has any suggestions or do I return to the transfer of files via a USB.

  Hello

  Think that a thread describes a problem which could be similar:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65340

  Lasko has posted a link for the update of the firmware maybe you need to update the firmware and should test again

  There is also an update of the firmware on the European driver Toshiba page
  [Stor.E TV + firmware udapte | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 4 & selFamily = 271 & selSeries = 254 & selProduct = 6350 salt ShortMod = null & language = 13 & selOS = all & selType = all & ye arupload = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 1 & ID = 80742 & DISO =-1 & driverLanguage = 42]

• Problems of AirPrint

  Need help, as I have tried everything I can think of!

  I have a printer HP DeskJet 3050 a (J611a, SMP1FN1115AR firmware version), which is connected to my router wireless Netgear WNR200 (firmware V1.2.3.7). I have three computers connected Windows (2 wired, 1 wireless) printing over the network absolutely fine. The printer is configured for ePrint and I tested too - everything works correctly.

  My mother has an iPad 3 (new iPad, the iPad, Apple no matter what you want to call it!) version of the software 5.1.1 (B 9, 206). I have it connected to my network, and it can access the internet. When I try to add the printer (click the arrow of the action in safari, select printer print, select search for printers) it says "AirPrint printers No Found.

  I installed the HP software & Bis, and he finds the printer and prints without problem, demonstrating that the network works fine.

  I followed the HP store, update the firmware (all devices were already at the latest), I enabled RIP_1 (_2B & 2 M) on the router, but nothing helped. I saw a suggestion to disable IPv6, but cannot find how to do that on the iPad, but the router is not IPv6 anyway so don't think that is the question.

  If anyone has any suggestions or (God forbid) a proven solution, I would be very happy to hear it until all my hair is ripped!

  Either by the way, the reason why I'm doing all this is to convince my MOM to buy the same printer (or the 3070) - so far it is not to leave a good impression. Also, I need to come here to test him, so excuse me if I take some time in response to suggestions.

  Thank you
  Paul.

  Your router blocks of Hello packets (mdns). You can check wth Netgear to see if they can help you to reconfigure the router or get an update firmware for the router.

• Voice VLAN with SRW224G4P

  Hi all

  I tried to config a vlan voice in this switches for the last 3 hours and for me it's impossible... I know how to do it in a switch IOS but with this switches is a nightmare...

  I have this topology

  PC - telephone to IP - SW1 SRW224G4P - SWCORE SRW2024 - router 2921 CME

  I have this config in my router,

  interface GigabitEthernet0/0

  no ip address

  automatic duplex

  automatic speed

  !

  interface GigabitEthernet0/0.1

  LAN description

  encapsulation dot1Q 1 native

  IP 192.168.5.95 255.255.255.0

  IP virtual-reassembly in

  !

  interface GigabitEthernet0/0.100

  Description VLAN VoIP

  encapsulation dot1Q 100

  IP 192.168.251.1 255.255.255.0

  IP virtual-reassembly in

  !

  SW1 created the VLAN 100 and activated as VLAN VOIP

  The first 3 octes for the mac on my phone is inserted into the Table YES telephony

  Belonging to a VLAN automatic voice is enabled in the port where the phone is attached.

  The port connected to the SWCORE has the vlan configured as labeled 100.

  SWCORE has created the VLAN 100 and activated as VLAN VOIP

  The port connected to SW1 has the vlan configured as labeled 100.

  The port connected to the router CME has the vlan configured as labeled 100.

  If I have another config port in SWCORE with 100 VLAN Tag I can ping from FMC to this host.

  Could be the problem, an error of spread vlan?

  Could someone help me? I'm desperate...

  Thank you in advance.

  Hi David,

  Thank you for the purchase of the switch.

  . Like what, even riding a bike, the switch is actually very easy to set up, if you practice on it...

  You mentioned that you use the 'phone YES picture' I assume you have a SF300 - 24 p or p/n command SRW224G4P-K9-NA.  Please be specific with the models of switches you use.

  Using the old SRW series or refreshed in the kernel SRWxxx-K9 (300 series) switch?

  First of all, make sure that you are using version 1.1.0.73 of the switch firmware. This change now or check that 1.1.0.73 is the active image on the switch.

  The switch has two areas to store the firmware images.  It stores the new firmware in the area of the image unused.  The administration for the firmware update Guide and select new firmware for the next reboot.

  CDP is enabled on the switch when using the new software, did not exist with older firmware, where my insistence to upgrade the firmware.

  ( Personally I would prefer that you have a role of catalyst for switching to your CME ISRG2 application, for purposes of support tech.) But this is the land of freedom..)

  I found the following when I added my SG300 - 28 p to a conscious UC500 of VLAN.

  The UC500 was vlan100 of advertising as a vlan voice, configured by Cisco Configuration Assistant, you could try CCP on your ISR.

  I got an IP phone that is plugged into the port of switch in the G7 and uplink to my UC500 via the Gig27 port.

  What follows in blue is a screenshot of my 300 series switch CLI interface.

  You will notice that the switch already filled both VLAN and port information, the only command that I added was "don't activate any complexity of passwords" and some usernames, including free from the screenshot below.

  the configured basically switch itself.

  -See the establishment of the system-

  Description of the system: 28 ports Gigabit PoE managed switch

  System of the time (days, hours: min: sec): 00, 00:12:04

  Contact system:

  Name of the system: switch4cf17c

  System location:

  System MAC Address: d0:d0:fd:4 c: f1:7 c

  System object ID: 1.3.6.1.4.1.9.6.1.83.28.2

  Fans Status: OK

  -See the version-

  SW version 1.1.0.73 (date, June 19, 2011 time 18:10:49)

  Start the version 1.0.0.4 (April 8, 2010 time 16:37:57)

  HW version V01

  Location of activity IP gateway Type.

  ----------------------- ----------------------- --------

  192.168.10.1 active dhcp

  IP address I / F Type of status

  ------------------- --------- ----------- -----------

  192.168.10.17/24 vlan 1 DHCP valid

  -show ipv6 interface-

  IPv6 is disabled on all interfaces

  -show running-config-

  interface gigabitethernet7

  Storm-control broadcast level 10

  output

  interface gigabitethernet7

  Storm-control include multicast

  output

  interface gi27

  point to point spanning tree-type of link

  output

  database of VLAN

  VLAN 100

  output

  Add a voice vlan Yes-table 0001e3 Siemens_AG_phone___

  Add a voice vlan Yes-table 00036 b Cisco_phone___

  Add a voice vlan Yes-table 00096e Avaya___

  Add a voice vlan Yes-table 000fe2 H3C_Aolynk___

  Add a voice vlan Yes-table 0060 b 9 Philips_and_NEC_AG_phone

  Add a voice vlan Yes-table 00d01e Pingtel_phone___

  VLAN voice Yes-table add Polycom/Veritel_phone___ 00e075

  Add a voice vlan Yes-table 00e0bb 3Com_phone___

  hostname switch4cf17c

  No complexity of passwords allow

  No server snmp Server

  interface gigabitethernet7

  macro description ip_phone_desktop

  output

  interface gigabitethernet27

  description of the macro "pass | valeur_log | switch ".

  output

  interface gigabitethernet7

  ! next order is internal.

  macro auto smartport dynamic_type ip_phone_desktop

  switchport trunk allowed vlan add 100

  output

  interface gigabitethernet27

  ! next order is internal.

  switch dynamic_type macro auto smartport

  switchport trunk allowed vlan add 100

  output

  switch4cf17c #sh cdp nei

  Ability code: R - router, T - bridge Trans, B - road Source bridge

  S switch, H - host, I - IGMP, r - Repeater, P - VoIP phone

  M - managed remote-device, C - CAST phone Port,

  W - two port MAC relay

  Device ID Local time from Port platform capacity ID Adv

  The interface direct worm.

  ----------------- ----------- ---- ------- ---------- ------------ -----------

  SEP503De50F133A gi7 2 158 H P CISCO IP eth0

  Phone

  SPA525G2

  68bdab0fdcfd gi27 2 169 S I Cisco SG gi9

  300 10 P

  (PID:SRW2008P - K9) - VOD

  switch4cf17c #sh vlan

  VLAN name Ports type permission

  ---- ----------------- --------------------------- ------------ -------------

  1 1 article gi1-28, required to Po1 - 8 by default

  100 100 gi7, required permanent gi27

  Automatically numbers which ports need to be listed in VLAN 100.

  I did not switch it was connected to VLAN100. I don't have add vlan100 to the database for VLAN.

  Get the ISR router to announce VLAN100 as a vlan voice.

  Best regards, Dave

• VAAI & ATS data warehouses

  Hello

  just a small Question. If I created and formatted a Datastore before VMFS5 SAN Bay was able VAAI data store after a Firmware Upgrade, now supported VAAI, will use ATS?

  If I create a data store on a VAAI select Bay SAN is the ATS Datasore only... so something to do here?

  Greetz,

  Peter

  Yes if you updated the firmware and VAAI is supported should be automatically enabled after a storage operation 'Refresh', you can check by following the instructions in the following link: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1021976 : ATS only it will not use SCSI-2 reservations, this is not a mistake and should on VMFS-5 volumes again. (see the link for more information).  You can disable individual VAAI fundamental operations, use of advanced settings if you need to.

• Store TV + firmware and Samba

  Since there doesn't seem to be much interest at Toshiba to straighten their firmware that I looked for other options. In another post, I found that the Stor.e TV + and Noontec V8S are basically the same. I've studied this and this seemed to be the case.

  OK, so I took the risk and updated the firmware of my Stor.e TV + Noontec V8S latest firmware website noontec V3.0816.13_V8S.

  The update went well without a hitch (took about 2 minutes of an old drive flash 256 MB connected to the back of the USB port on the unit, because I formatted before using it) and some of the irritating downsides of the Toshiba firmware has been resolved. Samba has worked in some way, but I was still not able to download songs directly on the Stor.e more wireless, which is the only other feature I need currently. The irritating remote control buttons were replaced by how any sane person could use them (I had changed my universal remote control to correct this, will have to change the settings if I kept the updated firmware) the new firmware seems solid, but I do not USE THE CAPABLITIES VIDEO, so I can't comment on that.

  A major drawback of this update for me, it's the small screen of the device to become much less readable. Looks like there is a problem with the police on the new firmware. I use my Stor.e only as a music player flac, and since I don't have it connected to a TV the small screen is essential for me to select tracks or discs. I have 300 + discs, the Stor.e is an excellent cheap media player, which connect me to my STEREO through a DAC system.

  I therefore had to change to the firmware of Toshiba to correct this display problem and stopped trying to get sorted Samba. Looks like I'd still use USB to download music to the Stor.e when I buy the new CD. What a pity.

  Either by the way, the new firmware of Toshiba is very similar to the old firmware, in what is lacking the possibility to start the Samba. In the readme file, Toshiba says that the new firmware corrects a problem with the network, but I think it's probably the smallest issue that most users have with the firmware of Toshiba.

  UPDATE:
  After some research, I learned that the MVix Ultio is just like the Noontec player, and some users flashed their Noontecs for the MVix firmware successfully. It was much less obvious if the Mvix and Toshiba are the same, the MVix photos different from the Stor.e, but I decided to give it a try anyway.

  So I have the TV Stor.e + updated the latest MVix Ultio (downloaded from the site Web Mvix) 3.12 firmware. Note that it is the standard Ultio, NOT the pro. Also note that with this version you don't have to (and in fact will not be able to) install the drivers of Samba and separate bitTorrent, as stated in the manual. These seem to be only for the Ultio pro and are already included in the standard firmware Ultio.

  This solved all my problems with Samba, and the display with the Noontec firmware problem does not exist with the Mvix firmware. A whim, I noticed with this version of firmware is when I try to open the visit from the Samba browser neighbor he sees not all hard disks. Seems to be a disk formatting question (I formatted the disc via the menu Store) I can see readers on my other Stor.e TV +. I know that Samba still works however, as I can access my Stor.E in exploring through a wireless router (it appears as Venus under Network on Windows 8).

  As I said previously, I use my Stor.e to play .flac files only, so cannot comment if the Mvix firmware has problems with playing other files or formats. I do not think that there will be major problems, even if, as it seems Mvix regularly update their firmware to fix any problems (NOT like Toshiba!)

  If my suggestion to those who want to get the firmware updated for their Toshiba Store TV + is to go for the MVix 3.12 firmware. He can still back up the firmware update from Toshiba (downloadable from their site) if there are problems.

  You do this at your own risk, however, if brick you your unit don't blame me...

• Store 1 TB TV | PA4209E-1HJ0 - firmware need

  Hey everybody, I googled all the posts that I have on this subject and I have only found one that unfortunately had a firmware hosted on mediafire which expired already.

  On this site I can not even find the store TV firmware (1 TB |) PA4209E-1HJ0) and it drives me crazy, cause it didn't work so I formatted it (I thought he had as... a rom, I don't like getting in shape and it works always got right?) and now I'm left with a useless thing...

  What is someone a little update their firmware so I can get this working again? If the model is different but similar id be happy to try at least... I don't know what to do.

  If you want to help and by mail (or have an alternative) is here: [email protected]...
  It's a big problem, I can see what everyone else has written: s. thanks guys!

  * @ Dave_H *.

  Link does not work properly. I was able to download the file. You must click on download button at the bottom of the info data and file size

• Firmware TV Stor.e

  First of all, sorry for my bad English of Spain

  I have a STOR. E TV 1.5 tB unit.

  Of course when an I bought the camera, I thought that it was better for support to acquire one from a company well know instead of these small businesses.

  I was wrong, this version of firmware is just a beta software very early. If you look for more details, you can find the typical "Hello World" screens on the device.

  Another question, is that the device appears to be a work in progress just to put something on the market, but the user experience for $ 200 is very bad. In my opinion a brick

  I just want to say that at least if you don't want to make an effort in the development of these devices, at least to help the community with the software and the documentation for the other people can do development.

  I'm tired of many large companies, talking about the responsibility of green, support and other issues. But if you develop bad products and do not help the community, you help make more waste, just for the money.

  I have 2 laptops from Toshiba, but I would nerver aquire another Toshiba device if you do not help the community

  Again, sorry for my English in Spain

  > I have 2 Toshiba laptops, but I would nerver aquire another Toshiba device if you do not help the community
  Sorry, but I must start with your last sentence. This forum has existed for several years now, and if you check a little content of this forum, you will see that many problems have been resolved, a lot of useful information shared between users and a lot of problems have been solved sharing good and useful advice or information.
  So I t understand this sentence.

  Do not mad or disappointed if no one will be able to help. You can contact the nearest Toshiba service whenever you want and ask for help. They have access to the database of Toshiba and can pick up all the necessary information to help you. Then contact the Toshiba service, explain the situation and I hope that they will be able to help you.

• Stor.e TV does not (need firmware if posible)

  I recently bought a TV 1.5 TB store and as it did not work for Ubuntu I formatted it and made it fat 32. Now it does not work on my TV when I plug, in the background of the original menu appears but not the files or any other option. If I press the config. on the remote, I can change audio or video settings, but that's all.
  If someone knows a way to fix it please help me.
  I need also if possible the original firmware or all the original files inside the apparatus, including folders hidden.

  Thank you

  I do not have this HARD drive, but the situation is complicated. If there is a firmware update, it must be available on the Toshiba download page.
  I don't know what to say, but maybe you should contact Toshiba service.
  I mean they have access to the database of Toshiba and I think they can help you with all this.

• Need firmware for Store.E tv

  Hello!

  I had to format my TV store because I wanted her to be in FAT32, but now I can't find the firmware on the Toshiba support page and my RD StoreE TV does not work on the TV.
  Any way I can find the firmware somewhere?

  Thank you!

  Toshiba is not a good company in terms of support for firmware. The problem is that they post on their site the original frmware nor any upgrade. Known bugs have been identified and... Since that time no response, no solution, nothing. I think that I will no longer buy any product of Toshiba (hard drive or anything else). For your question, it seems strange to me that formatting a HARD drive you have lost the firmware... unless there is something written on the boot record of the Toshiba store which, once lost, does not have the device works correctly.

• TV Toshiba Stor.E 1 TB PA4209E-1HJ0 SYSTEM FIRMWARE UPGRADE?

  Hey

  I just bought a toshiba stor. Media Player 1 TB E tv, but it does not support formats mkv video & others like rmvb
  Y at - it an update of the system firmware that I can Flash the BIOS?
  If Yes please give me the link to it?

  Note: I him have not found on the support page

  But I read that the Stor.E tv 2 TB support video file formats, that I'm looking.
  Would it not possible to use the same bios firmware on the 1 TB?

  Thank you & best regards

  > But I read that the Stor.E tv 2 TB support video file formats, that I'm looking.
  Yes, but you said that you found some info this firmware update would add some videos I format didn t find these info, so I guess it was just an idea and not true info

• Store.E TV + updated with Firmware not supported

  Hi all

  Since then, I was unhappy with the original firmware due to the absence of some support from subtitile.

  I updated it with playon version PV73100_v7.06.r1199 playon.unixstorm.org firmware

  Now my device is functional, but not on the remote control buttons work except the power button

  I do not know how to uninstall. :(

  Can someone help me on how to uninstall.

  Thank you

  Try this page:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EU

  Choose here:
  Options
  Training devices
  Multimedia hard drives
  3.5 inch StorE TV +.

  Now you should be able to get the firmware 2.12_UI1.0

• Toshiba STOR. E TV + firmware update

  Hello

  Y at - it any update of unofficial firmware for the STOR. E TV + series of products? I see clearly that there is no upgrade official firmware...

  One delivered with the product resembles "work in progress" (you can see this throughout the entire user interface, which is awkward and very "90 years", but especially if you access the device using your browser - although this could be useful if your calculation is rusty and need a little help to add base :)).

  In addition, despite the fact that the product is on the market for more than a year now, there is no update firmware (despite the obvious need for a). I sometimes wonder where the release date would have been if the time of the product on the market would have been extended in order to have a fully functional product right out!

  Developers of Toshiba @: If you don't bother to release a firmware at least give the code "as what" to the community. This way you will definitely find someone willing (out of pure passion) all you had to do (for the money you make as developers, part of those we pay for this product as customers).

  Thank you.

  STOR. E TV +?
  I feel betrayed

  :(

• STOR. E TV can play some formats - is it possible to get the firmware update?

  Is it possible to get the update of firmware for STOR. E TV, because this product cannot read many formats.
  I woud would better update of firmware for video - AVI (Xvid, AVC, MPEG1/2/4), MPG/MPEG, VOB, MKV (h.264, x.264, AVC, MPEG1/2/4, VC - 1), TS/TP/M2T (MPEG1/2/4, AVC, VC-1), MP4/MOV (MPEG4, h.264), M2TS, WMV9.

  Can someone REPAIR THIS TOSHIBA in the FUTURE?

  Hello

  It would be always great if a device would be supports all possible formats
  Allows how such as firmware updates or similar would be released
  Who knows what guys are going to do in the future, we'll see.

• Data store is not mounted automatically after updating the Firmware of the LSI

  I've recently updated the card RAID LSI firmware on my ESXi 5.5 system (patched and update top of page)

  When I rebooted, took place the following:

  1. the associated VMFS volume RAID was mounted

  2. the data on the volume store was not mounted

  I mounted the data store manually and restarted my VMs

  Do I have to re-signing the Volume and/or the data store to raise it properly.

  Steve

  The command should be ok and do the same thing as the command esxcli esxcli storage vmfs snapshot mount -l label|-u uuid (for details, see http://kb.vmware.com/kb/1011387).

  André