Storage and manipulated data

Similar Questions

• I get a message saying "you have exceeded your profile storage space. Yet all the files listed th are actually my docs and application data. How to delete my profile, but not from my pc? increase the max profile size

  I get a message saying "you have exceeded your profile storage space. Yet all the files listed th are actually my docs and application data. How to delete my profile, but not from my pc? increase the max profile size

  1. the first thing to do is to make sure that the computer is completely virus/malware-free. Googling around this error produced quite a few links where the posters were or had been infected with Spyware Protect 2009 rogue.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Once the scanning is complete (do not skip the preparatory stages no more), if the problem persists:

  2. double-click on my computer, right-click the icon for your hard drive, click left to get its properties. If you see options to set Quota management make sure that they are disabled.

  3. in the case - BUT ONLY AFTER YOU ARE sure THAT THE MACHINE IS MALWARE/VIRUS-FREE - copy the lines between asterisks (not including the asterisks) below and paste it into Notepad. Save as undopolicy.reg somewhere, you will find. And then double-click the .reg file, that you have just made to melt in your registry. I hope that this will take care of the issue.

  *****
  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  'EnableProfileQuota ' = -.
  'ProfileQuotaMessage ' = -.
  "MaxProfileSize" = -.
  'IncludeRegInProQuota ' = -.
  'WarnUser ' = -.
  'WarnUserTimeout ' = -.
  *****

  MS - MVP - Elephant Boy computers - don't panic!

• No network traffic VM being withdrawn and any data store Info

  I am running a trial of Foglight Enterprise visualization and upward and running things and an agent installed to my VMWare vCenter server infrustructure.  He shoots a lot of info, but none of the basic data store info is pulled (not the stuff that requires the Foglight for integration of storage) and none of the information network is taken for the individual virtual machine.  Guests and parents have netowrk showing traffic, but nothing on the side of the virtual machine.  The environment is configured with dvswitches for data, iscsi, vmotion, etc..  Any idea of what might happen, or I can look at?

  I see some errors in the agent log if I pull it down on data warehouses... Here's a sample:

  ERROR [Quartz [0] - 6] com.quest.agent.esx.task.HardwareTask - DatastoreInfo is missing for Datastore:datastore - 162
  2015-03-17 13:57:16.165 ECHO ERROR [Quartz [0] - 6] com.quest.agent.esx.task.HardwareTask - DatastoreInfo is missing for Datastore:datastore - 131
  2015-03-17 13:57:16.165 ECHO ERROR [Quartz [0] - 6] com.quest.agent.esx.task.HardwareTask - DatastoreInfo is missing for Datastore:datastore - 10985

  But apart from that, I don't see much... I do not see what seems to be warnings of Java, like this:

  2015-03-17 13:57:17.291 ECHO [Quartz [0] - 6] WARN com.quest.agent.esx.task.ESXAgentTask - inventory and relationship - FGLAM submission error: null
  java.lang.NullPointerException
  at com.quest.vmware.agent.history.samples.VMWHostVirtualSwitch__IMPL.__addPropertiesToNodeTree(VMWHostVirtualSwitch__IMPL.java:2418)
  at com.quest.vmware.agent.history.samples.VMWHostVirtualSwitch__IMPL.__addToNodeTree(VMWHostVirtualSwitch__IMPL.java:2348)
  at com.quest.vmware.agent.history.samples.VMWESXServerNetwork__IMPL.__addPropertiesToNodeTree(VMWESXServerNetwork__IMPL.java:1339)
  at com.quest.vmware.agent.history.samples.VMWESXServerNetwork__IMPL.__addToNodeTree(VMWESXServerNetwork__IMPL.java:1078)
  at com.quest.vmware.agent.history.samples.VMWESXServer__IMPL.__addPropertiesToNodeTree(VMWESXServer__IMPL.java:5015)
  at com.quest.vmware.agent.history.samples.VMWESXServer__IMPL.__addToNodeTree(VMWESXServer__IMPL.java:4213)
  at com.quest.vmware.agent.history.samples.VMWCluster__IMPL.__addPropertiesToNodeTree(VMWCluster__IMPL.java:10666)
  at com.quest.vmware.agent.history.samples.VMWCluster__IMPL.__addToNodeTree(VMWCluster__IMPL.java:10010)
  at com.quest.vmware.agent.history.samples.VMWClusterCollection__IMPL.__addPropertiesToNodeTree(VMWClusterCollection__IMPL.java:780)
  at com.quest.vmware.agent.history.samples.VMWClusterCollection__IMPL.__addToNodeTree(VMWClusterCollection__IMPL.java:702)
  at com.quest.vmware.agent.history.samples.VMWVirtualCenter__IMPL.__addPropertiesToNodeTree(VMWVirtualCenter__IMPL.java:9298)
  at com.quest.vmware.agent.history.samples.VMWVirtualCenter__IMPL.__addToNodeTree(VMWVirtualCenter__IMPL.java:8979)
  at com.quest.vmware.agent.history.samples.VMWModel__IMPL.__addPropertiesToNodeTree(VMWModel__IMPL.java:1304)
  at com.quest.vmware.agent.history.samples.VMWModel__IMPL.__addToNodeTree(VMWModel__IMPL.java:974)
  at com.quest.vmware.agent.history.samples.VMWModel__IMPL.buildSubmission(VMWModel__IMPL.java:919)
  at com.quest.vmware.agent.history.samples.VMWModel__IMPL.submit(VMWModel__IMPL.java:810)
  at com.quest.agent.esx.task.HardwareTask.submitData(HardwareTask.java:813)
  at com.quest.agent.esx.task.ESXAgentTask.submit(ESXAgentTask.java:208)
  at com.quest.agent.esx.task.ESXAgentTask.run(ESXAgentTask.java:201)
  at com.quest.agent.esx.ESXAgent.runTask(ESXAgent.java:518)
  at com.quest.agent.esx.ESXAgent.esxHardwareCollection(ESXAgent.java:718)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
  at java.lang.reflect.Method.invoke(Method.java:606)
  at com.quest.glue.core.services.EquivalenceInvocationHandler.invoke(EquivalenceInvocationHandler.java:76)
  at com.quest.glue.core.agent.AgentInteractionHandler.invoke(AgentInteractionHandler.java:177)
  to com.sun.proxy. $Proxy65.esxHardwareCollection (unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
  at java.lang.reflect.Method.invoke(Method.java:606)
  at com.quest.glue.core.agent.scheduler.CollectorCallback.invokeCollector(CollectorCallback.java:246)
  at com.quest.glue.core.agent.scheduler.CollectorCallback.execute(CollectorCallback.java:146)
  to com.quest.glue.common.util.scheduler.quartz.QuartzScheduler$ ScheduledTaskSequentialJob.execute (QuartzScheduler.java:738)
  at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
  at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:615)
  at java.lang.Thread.run(Thread.java:745)

  Thanks in advance!

  -Jake

  Hey Jake,

  I don't know what could cause this problem, it's a bit you added the role of travel data store for the Foglight service account in vCenter. Could you please create a Service request with support?
  https://support.software.Dell.com/

  Could you also attach a support package for FglAM to the case? Please put the number of file here, or send it to me via private message.

  Thank you.

  Gaston.

• Local storage and multiple ESXi hosts

  Hi, I was wondering how vWorkspace manages local storage in an environment with a single server Vcenter and two ESXi, with a local data store each.

  If I store a 'master' (I mean the gold statue) vm on the local storage of an ESXi, can replicate vWorkspace this virtual machine to the local storage of the other ESXi as Citrix VIAB?

  If not, how can I use both my ESXi servers with local storage and maybe provide some sort of HA?

  Am I forced to use a storage shared, if I want to be able to deploy clones related both to my ESXI?

  Thanks in advance.

  Hello

  Use vSAN, or no matter what virtual SAN Appliance as an iSCSI SAN storage to prosecute two storage facilities... You can replicate between the two servers and same LUNS are used by vWorkspace.

  • StarWind free iSCSI Solution A
  • OpenFiler
  • vSAN
  • Open-e iSCS SAN

  Quick search... www.unixarena.com/.../Top-10-Storage-appliance.html

• Cannot add the NFS storage to the data device

  Hello

  I try to add the NFS storage unit of data.

  I followed the documentation, and when I ran the script supposed to mount/add NFS storage to the device, an error message indicating that the export is read-only, which is actually not the case:

  ./Mount-NFS-Store.pl nfs--servername.domain.com:/hzn-data-01

  NFS: servername.domain.com:/hzn-data-01

  HOST: servername.domain.com

  servername.domain.com is alive.

  Mount.NFS: deadline set for Fri Mar 8 21:33:13 2013

  Mount.NFS: try the options based on the text 'hard, rsize = 32768, wsize = 32768, intr, addr = 128.178.102.59'

  Mount.NFS: prog 100003, try around = 3, prot = 6

  Mount.NFS: try the port TCP XXX.XXX.XXX.XXX prog 100003 3 prot 2049

  Mount.NFS: prog 100005, try around = 3, prot = 17

  Mount.NFS: try XXX.XXX.XXX.XXX prog 100005 3 UDP port 1234 prot

  ServerName.domain.com:/HZN-Data-01 on/opt/zimbra/store10 type nfs (rw, sync, noatime, hard, rsize is 32768, wsize = 32768, intr)

  Error has occurred: directory does not exist or is not writable: / opt/zimbra/store10

  zmvolume failed at ligne./mount-nfs-store.pl 49.

  Of course, I tried to go to the mount point (in this case/opt/zimbra/store10) and quite capable of writing in it (touch, create the file + dir, etc...).

  The data device has root access to the NFS export. I have no idea about the cause of this error.

  Any clue?

  Thank you very much

  Eric

  In my view, that ashish ask you to run the following command, so that the folder is owned by the user «zimbra»

  chown-r zimbra:zimbra

• Questions about the implementation of clusters of storage and DTS on active cluster

  I have a few questions about the implementation of clusters of data store and SRS storage in VSphere 5.1.

  We have a data center with about 15 HP blades and a few servers non-lame.  The hosts are all either VSphere 5.0 or 5.1.  Our back-end storage is an EMC VNX 5700 with about 20 stores of data.  All the VMWare is managed by VCenter 5.1 running on a dedicated physical machine.

  Currently, each data store is used individually; No piles of data store are put in place.  When a new virtual machine is created, the administrator usually chooses the data with the most space store.  Periodically, we will go back and manually storage vMotion machines to balance the load.

  Recently, we have expanded the VNX storage, so we now have LUNS in different pools, with different levels of performance.

  What I would do is set up for the data store clusters, so that us when a virtual machine is created, the administrator must not know what data store is in which pool.  Also take advantage of the DRS storage so that the burden of storage will be "refine" himself a little.

  I know the setting up of a cluster of storage in a 'clean' environment is quite simple, but my concern is creation/conversion data warehouses existing in active production in the cluster, while they are used.

  If I access the screen "data warehouses and store data from clusters ', right-click on the data center and create a cluster, and then move the various data stores in the new cluster, will there be an interruption in the production running systems?

  I also wonder about activation of storage i/o control.  It is not currently enabled on data warehouses.  I know it's useful for the StorageDRS, but will be allowing any negative impact on the system?  If I turn on the warehouses of data, is there anything else I should do or set in addition to all that allows him?

  Finally, we are in the process of Site Recovery Manager configuration.  SRS has an impact on the configuration of the data clusters and DTS store?

  Thanks in advance for your comments.

  Mike O.

  Gregg Robertson wrote:

  Hello

  Clusters of data and using DTS store doesn't impact RS even if you create a cluster of data store for storage of replicated data and another for everyone else, this way you machines virtual you want to replicate are not moved on warehouses of data that are not replicated , but will still have the ability to move if there is a conflict.

  Gregg

  With all due respect but SRM and DTS don't go together. SRM does not at all support the use of DTS. So if you are configuring SRM forget DTS for now.

  Reason for this is that SRM knows no DTS and VMs can be in flight when a failover should occur, and bad things can happen. Also, the protection breaks when a virtual computer is moved between data warehouses in a cluster data store.

  In short: don't go there.

• install esxi 4.1 and the data store on the same server

  Hello

  I want to install esxi 4.1 and the data store on the same server.

  My problem is that I can't make partitions to really separate them and I would reinstall esxi without wiping the data store.

  Y at - it another way to put a record out of the raid only to install esxi.

  I also do not install on a USB key.

  Thank you

  AZEL says:

  Hello

  I want to install esxi 4.1 and the data store on the same server.

  My problem is that I can't make partitions to really separate them and I would reinstall esxi without wiping the data store.

  Y at - it another way to put a record out of the raid only to install esxi.

  I also do not install on a USB key.

  Thank you

  AZEL,

  Can you give us more details about your current environment?  What is the size and the data store space used? Do you have any storage of additional network attached to the host (for backup purposes)?

  My assumptions of your post do you have 1 stand-alone host with ESXi 4.1 aready installed and you also have a local data store on the same host, but you want to re - install ESXi 4.1 while keeping the contents fo the data store.  Is this correct?

• RS 4 and NFS data warehouses

  Hi, I have a problem with SRM and NFS data warehouses

  When I set up the table through vCentre Customer Manager in the MRS Plugin I get the following message when scanning for NFS data storage

  "Replicated devices could not be matched with inventory data warehouses."

  We have a 4.01 vSphere server with ESX 3.5u4 hosts.

  SRM 4.0 is deadlocked.

  Our storage is on IBM Nseries N5600 reporting using DataOntap 7.2.5.1.

  The SRA we use are ver 1.4 of IBM.

  Someone at - it never experianced this problem and if so how to fix it.

  Thank you

  Mahmood

  I used this SRA without any problems, so I suspect that something is wrong with your replicated configuration of NFS export.

  To help further, I would need to see the SRM journal from the site server protected SRM immediately after seeing this message. You can download that on this subject?

  I also suggest that you connect a SR with VMware support, because they can help here as well.

  see you soon

  Lee

• When I send a text message and mobile data are off, it is not given, but I do not see this message for a few minutes. I can then refer using "send as a text message. How can I 'send as a text message' in the first place?

  When I send a text message and mobile data are off, it is not given, but I do not see this message for a few minutes. I can then refer using "send as a text message. How can I 'send as a text message' in the first place?

  Disable the iMessage?

• iOS has said I'm about to storage and I'm not

  My iPhone has just started to alert me that I'm on storage, but when I go into settings > general > storage and iCloud iOS use tells me I used 4.6 GB and have always available 7.7 GB. What is going on?

  Thank you

  Hello

  Fact he says iCloud storage or storage of the phone?

  If she says iCloud storage is almost full. Follow this link: manage your iCloud - Apple Support storage space

  If it says iPhone nearly full storage. Visit this link: check your storage space on your iPhone, iPad and iPod touch - Apple Support

• How can I recover the modules and their data from a failed HARD drive (the lost BONE areas, but data files are readable)?

  The HARD drive that was my OS (Windows XP Pro SP3) failed and lost quite a few areas which are essential for the operating system running. Other data is still readable. A got another HARD drive and installed Windows XP SP2, Firefox and other programs. I was able to retrieve the bookmarks, security certificates, and other profile information using the information found in bandages.

  None of them addressed how do to recover the modules or their data. Specifically, there are several large, elegant scripts that took months to develop and customize.

  Articles related to migration and other do not work for me because they require the old copy of FF is functional, that is not because the OS on this HARD drive is damaged. Is it possible to recover these data, similar (or not) about how I could get the other profile info?

  Have you copied the entire folder C:\Documents and Settings\username \Application Data\Mozilla\Firefox\ on the old drive?
  If this is not the case, can you?
  If so, make a copy and save this folder just in case.

  If so, you could replace this folder on the new facility by \Profiles\ [with your profiles inside] folder and the profiles.ini file [delete all other files / folders that may also be in the folder "Firefox"] -and then replace with the same folder named from the old failed drive. Note that you will lose what you already have with the new installation / profile!
  Your profile folder contains all your personal data and customizations, including looking for plugins, themes, extensions and their data / customizations - but no plugins.
  But if the user logon name is different on the new facility that the former, any extension that uses an absolute path to the file in its prefs will be problems. Easily rectified, by changing the path to the file in the file prefs, js - keep the brake line formatting intact. The extensions created after the era of Firefox 2.0 or 3.0, due to changes in the 'rules' for creating extensions usually are not a problem, but some real old extensions that need only "minor" since that time can still use absolute paths - even though I have not seen myself since Firefox Firefox 3.6 or 4.0.

  View instead of 'Modules' I mentioned the 4 types of 'Modules' separately - Plugins are seen as 'Add-ons', but they are not installed in the profile [except those mislabelled as a "plugin", when they are installed via an XPI file], but rather in the operating system where Firefox 'find' through the registry.

  Note: Migration articles can tell you do not re - use the prefs.js file, due to an issue that I feel is easily fixed with a little inspection and editing. I think you can manage that my perception is that you have a small shovel in your tool box, if you encounter a problem you are able to do a little digging and fixing problems with the paths to files - once you have been warned.

  Overall, if you go Firefox 35 35 or even Firefox 34 to 35, I don't think you will run in all the problems that you can not handle [that I cross my fingers and "hope" that I'm not on what it is obvious].

  With regard to the recovery of the 'data' for individual extensions - there are many ways that extension developers used to store their data and pref. The original way should save in prefs.js or their own file RDF in the profile folder. While Firefox has been developed more, developers started using their own files in the profile folder. And because Mozilla has started using sqlite database files in Firefox 3.0, Mozilla extended their own use of sqlite, as have extension developers.
  Elegant uses the file stylish.sqlite to store 'styles', but something in the back of my mine tells me that 'the index' maybe not in this file with the data. But then again, I can be confusing myself a question I had with GreaseMonkey awhile back where I copied the gm_scripts folder in a new profile and with already installed GreaseMonkey but with no script. These GM scripts worked, but I could not see them or modify them - they do not appear in the user GM extension interface window in Firefox.

• Error of Facebook, what can I do? Resource://jid0-wpch2liwmumjc8av1vwejwvgjbi-at-Jetpack/qclean-remove-Facebook-ads-suggested-pages-and-posts/data/qclean.js:53

  Facebook maintains the gel, a problem caused by this script resource://jid0-wpch2liwmumjc8av1vwejwvgjbi-at-jetpack/qclean-remove-facebook-ads-suggested-pages-and-posts/data/qclean.js:53

  I tried many solutions suggested, nothing works. Please advse. Thank you.

  Ed

  Hello ed, this error is caused by the qclean addon that you have installed. Please disable or delete or report the problem to the author of the extension...

  Disable or remove modules

• I am not able to download apps for my iPhone on the App Store. He just 'waiting '. But never starts the download. I tried with wifi and mobile data. The two are not download apps

  I am not able to download apps for my iPhone on the App Store. He just 'waiting '. But never starts the download. I tried with wifi and mobile data. The two are not downloading the applications Can u find out what's wrong? I use iPhone 5s

  I had the same problem. At the same time hold the screen lock button and the home button until your iPhone restarts. That solved the problem for me.

• How to eject my iphone, or player card on my macbook air?  I don't want to disconnect and lose data...

  How to eject my iphone, or player card on my macbook air?  I don't want to disconnect and lose data...

  You won't lose data when you remove an iPhone, unless you're in the middle of the backup or synchronization of the device.

  If you see no activity in iTunes/Photos/etc... Then, it is safe to unplug.

  With a card reader (SD card?) you do drag the desktop icon to the trash. It turns into an arrow when you drag an icon ejector.

  Similarly, you can click Finder on the dock, then locate the reader on the left column and click on the "arrow" to the right of the device to eject it.

• Since the last system upgraded my menu bar top with wifi and time, date etc etc is hidden unless I have sulk my cursor on it. Same thing with apps from shingles. How can I restore it is always there?

  Since the last system upgraded my menu bar top with wifi and time, date etc etc is hidden unless I have sulk my cursor on it. Same thing with apps from shingles. How can I restore it is always there? bar menus hidden-how do I restore?

  SystemPreferences-> Dock: automatically hide / show Dock

  SystemPreferences-> general: automatically hide / show menu bar