Storage space does not add correctly?

Similar Questions

• Storage space does not connect to a drive

  Whenever I have restart my computer storage does not reconnect to one of the disks.

  If I take the cover off of the computer unplug and reconnect the drive (all voltage) it recognizes the drive, but I know that the drive is connected, it is recognized by the Storage Manager Marvel that it is connected via a PCie 9230 wonder.  I unplug the connector SATA Marvel made the player not connected and when I plug again, it recognizes the drive, at this point storage spaces reconnects readers physical and made available again assigned storage space.

  I have a motherboard ASUS P8Z77 - V Premium.

  Edge Liteonit LMT-32L3M (general storage)

  On the edge SATA ASUS:

  SSD Samsung 840 PRO boot disc

  Blu - Ray burner

  2 x Western Digital WDC WD10EADS-00L5B1 1 TB drives (readers of pooling of storage)

  On the menu of PCIe 9230 Marvel

  1 x Western Digital WDC WD10EADS-00L5B1 1 TB drives (readers of pooling of storage)

  3 x Western Digital WDC WD30EZRX-00DC0B0 3 TB drives (readers of pooling of storage)

  It's the 3 TB drive on Marvel Port 3, which is not recognized at startup, but is on disconnect/re-connect.

  The system has worked well for several months, but has just started to drop the disc.

  I can't keep the lid and UN-plug/re-plug the disc each time.

  is there a problem with storage space as the BIOS recognized the drive as a startup just used Windows connect until forced.

  Hi,
   
  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro
   
   
  Please do not hesitate to contact us if you have other questions related to Windows.

• Put into service space does not add

  I have a virtual machine with a 275 GB drive. I checked the directory of the virtual machine and added to them and with snapshots, deltas and everything else, is about 280 GB. However, when I check space configured in vCenter he shows 552GB. How is this show? Someone knows whence this number?

  Thank you

  Scott

  2 x disk storage (due allowance for snapshots) + memory and overhead... Up to 275 x 2 + RAM = 552 ~ GB

  If delete you the snapshots (this should be temporary anyway) then your provisioned use will be reduced to approximately 277GB

  VMware VCP4

  Review the allocation of points for "useful" or "right" answers.

• Help, please! I'm going nuts! JavaScript problem when you try to load the images on the E - Bay auctions and My Space does not look right

  This is the second time I've been here for help and I had to use IE in recent weeks because I still I have this problem. The pictures on individual E - Bay auctions start to load then stop, I think it is a Javascript problem. I already tried the troubleshooting tips for the "images are not displayed" AND I uninstalled/reinstalled Firefox without result. My space does not seem to be display correctly, for example, if I want to change the color of a font in a message boxes appear, but no color... Please HELP somebody! Thank you!

  URL of affected sites

  http://CGI.eBay.com/WS/eBayISAPI.dll?ViewItem & Item = 230497781181 & ADME:B:SS:US:1123 = getting

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
  You can use "Disable all add-ons" window the startup of Firefox to solve the issues in Safe Mode to disable all extensions.
  You will need to close and restart Firefox after each change via "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')
  .
  You can also try to 'Reset all the preferences for the default user of Firefox' on the starting window of Firefox to solve the issues in Safe Mode - see http://kb.mozillazine.org/Resetting_preferences

• Yahoo mail does not load correctly

  Yahoo mail does not appear correctly. Does not add, or graphics. I uninstalled Firefox and reinstalled the latest version and it did not help. I started Firefox Add - ons disabled and this did not help. Yahoo email is the only site to be on. Gmail opens fine with Firefox and yahoo mail opens fine in Internet Explorer. It started tonight and nothing on my computer has been changed before you start.

  Nothing of what you have suggested will be / will work. I tried all your suggestions and much more, before you find what is the problem. Yahoo mail not properly opens with Firefox, if you try to open it with Yahoo messenger open. If anyone runs into this problem, close on yahoo Messenger and open your mail with Firefox alone.

• I just downloaded Firefox 4.01 but it does not display correctly.

  I tried to upgrade Firefox 3.6.7 to Firefox 4.01 but when update is finished, the browser does not display correctly there is for example no address bar. Here is a screenshot: http://i.imgur.com/zBujK.jpg.

  I've downgraded to 3.6.17 and then installed Firefox 4.01 again but this does not solve the problem, or don't leave the browser and entering again or restart the computer.

  Try:

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

  If this does not work in mode without failure, then disable all extensions and then try to find out who is the cause by allowing both the problem reappears.

  • Choose "Disable all add-ons" on issues to troubleshoot Firefox in Safe Mode to set window to disable all extensions.
  • Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• Signature "by the account" does not work correctly

  Features: iPhone 6 iOS available 9.2 41.1 GB

  I have configured and you can send from multiple e-mail accounts (6 including iCloud) on my iPhone.

  My problem: the signature "by the account" feature does not work correctly. I enable this feature, create distinct signatures, choose to send other than the default e-mail account. However, the default signature in the message, followed two copies of the signature on behalf of which I want to send the message below. I deleted and readded to each email account and of the signature, but find the same result.

  Having this problem as well, or very close.  I can't get the HTML signatures to work (IE, appear) when

  I sent mail from an account that has a.

  This question to a while back in older iOS and has been fixed, now it's back...

  I often crash parameters when you try to paste a HTML signature in place and when

  I have a y arrive, it does not show in the email project.  When I add a text character

  at the signing, he sometimes shows up.  Very erratic...

• Desktop computer does not load correctly

  We can no longer switch uses profiles without having to reprocess the computer because the Office does not load correctly.  When we switch between profiles of uses without reformulate the computer, we get an error message indicating that "your office is not load correctly... loaded in safe mode.

  This start happening a few weeks ago.  This problem occurs every time that we move from user profiles or log out, and then move the user profiles.  We have to reprocess the computer on the desk in order to load successfully.

  All that we can do to fix this?

  If this problem was not more than 15 days ago, and if you remember the date when you did not have this problem, please do a system restore. Choose the date when there was no problem that your restore date.
  If this does not work, please do a check of the filesystem (sfc/scannow)

  Procedures for system restore:
  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done

  File system (sfc/scannow) check how to:
  Start button > Search box type cmd > look up, do a RIGHT click on cmd.exe > click on Run As Administrator > in this window cmd black and white, type at the prompt flashing sfc/scannow > press the ENTER key.
  Note: there is a space between 'sfc' and ' / '.
  To sit and wait. It will take time.
  When finished, exit the cmd window.
  Reboot (restart your computer)

  t-4-2

• My DVD player does not work and all the information I can find is "this device does not work correctly.

  Hi, I have Windows Vista and I use a computer laptop Dell studio. When I insert a disc into my CD/DVD drive, the drive spins and it looks like it is about to start and makes the same noise start several times and then just stops. My computer does not record that there is a disc there. If I double click on the DVD drive in 'My computer' it ejects my disc and says "insert the disc in drive E".

  I went on the 'repair' Microsoft online scanner and it told me that there is a problem, but he can fix it. In Device Manager, under CD/DVD-ROM readers I have Optiarc DVD +-RW AD - 7640S. Under device status - general - properties, it says "this device does not work correctly. He also says that I have the updated driver.

  I even uninstalled the driver as a last resort and then restarted my computer. It reinstalled the driver for me, but there was no change. Please help me!

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry
  entries that do not fix the resolution of problems and those who "could" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys in my opinion, are those in question - for the CD/DVD drive of course subkeys as
  There will be other subkeys in these keys. Do not forget to ask involved specific keys as well as the
  Parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Layer mask does not work correctly.

  My normal layer mask does not work correctly.  When I click on add a layer mask, I get this instead.  I change a setting by chance?  He won't let me see where my traditional black and white mask.

  

  Hello

  In the layers panel, click the dropdown menu, click on Options in the Panel and select one thumbnail size other than None.

  

• Application does not work correctly when I press a CommanButton

  Hi all, I'm having a problem with weblogic 10.3.5.
  
  It turns out that an application created with JDeveloper 11.1.5, I have test and all is well in that the JDeveloper integrated Weblogic.
  
  But when to deploy on a stand-alone 10.3.5 weblogic server, the application does not work correctly when I press a CommanButton to go to another search page (the 'action' property is properly set), but nothing happens, remains in the same home page. Similarly when a link of commanButton to run a workflow, it does not work, however in the integrated JDeveloper to Weblogic it works correctly.
  
  How can I solve these problems?
  Thank you.

  One thing you shouldn't do is add '.jspx' to your URL. This shows the page, but does not start the life cycle of faces that show not work button not working navigation.
  Use

   http://:7001/myApp/faces/index
  

  And it should work.

  Timo

• Menu Horizontal Spry does not display correctly

  The next page "" http://www.ken-wo.com/beta " has a horizontal menu spry and when his view in Firefox, it works perfectly, seen in IE, it does not appear correctly and displays the drop-down menu at the top of the page rather than under the menu."
  
  Look forward to help, thanks in advance

  Here, it's pretty late for me to really check your site, but you have a little
  Funky coding going on this page that could very well contribute to the
  bewilderment of the submenus... seems you add styles directly via
  the Inspector who is a no-no. You should be doing all the styling
  about the spry menu via the style sheet...
  you have this for example:

• and there are many more of them scattered throughout the code. I have also
  Note that you used for centering divs that cannot be helping either.

  Why not return to the stylesheet that was created as soon as you
  added the menu of the page and edit ONLY via the style sheet and
  see how you go.

  --
  Nadia
  Adobe® Expert community: Dreamweaver
  ----------------------------------------
  CSS templates | Tutorials | SEO articles
  http://www.DreamweaverResources.com
  ~ Available customization service ~
  http://www.csstemplates.com.au
  Spry Widget examples:
  http://www.DreamweaverResources.com/Spry-widgets/
  ----------------------------------------

  > Next page "" http://www.ken-wo.com/beta " has a horizontal menu spry"
  > and
  > when his view in Firefox it works perfect, seen in IE is not
  > display correctly and the drop down menu displays at the top of the page
  > more
  > then in the menu.
  >
  > I look forward to help, thanks in advance
  >

• My phone does not work correctly

  My phone Bluetooth, Wi - Fi and GPS connection does not work correctly. Bluetooth and wifi have the low range of connection and can barely connect what either. GPS won't work at all, so I can't use it for direction more.

  Take it to an Apple store for diagnosis.

• I have an Apple computer, use the browsers Firefox and Safari, use Comcast for my email. Lately, when the Firefox, my email does not work correctly. Why?

  I have an Apple computer, use the browsers Safari and Firefox. I use Apple mail and Comcast to my email. Lately, in the case of Firefox, my email does not work correctly. I get a message "your server license has expired. While usually, I can access my emails, I can't delete the unwanted emails. This problem will not occur when I use Safari and Apple mail. Is this a problem of Firefox or Comcast? Do you know what license is expired?

  Hello

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• Firefox seems to have recently developed seemingly random usually do not remember bookmarks, particularly when the pc does not stop correctly. Thank you

  Firefox seems to have recently developed seemingly random usually do not remember bookmarks, particularly when the pc does not stop correctly. Thank you

  If Firefox detects that the places.sqlite database is corrupted then Firefox can create a new database file and import bookmarks from a JSON backup that does not contain the most recent bookmarks (a new JSON backup is created when you run Firefox for the first time on a day), then you may lose the bookmarks in such a case.

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file