Storage Vmotion - have

Similar Questions

• VM have been storage vMotioned to another data store, and now I have 3 VM with white "!" inside a red square and I want to understand the cause of this.

  VM have been storage vMotioned to another data store, and now I have 3 VM with white "!" inside a red square and I want to understand the cause of this.

  Can you try to make a vmotion host and see if it gets resolved? If not, can you close the virtual machine and start again? I have seen this problem before and a stop and start resolved.

• question of vMotion and storage vMotion

  I have everything set, UCS 5108, ESXi host, VMs, I don't have a SAN connection yet... My question is if I can enable vMotion? Let's say I have a cluster in vCenter, within this group, I have attached two ESXi host, win2008 VM in an ESXi and running, I can migrate (using vMotion) as win2008 VM to an another ESXi without connection SAN?

  How storage vMotion to an ESXi host hardrive to an another ESXi host hardrive? Is this possible?

  Note: I have not connection SAN in this configuration

  One of the requirements for vMotion is shared storage that would allow visibility between source and destination ESXi hosts. (SAN, iSCSI or NFS).

  http://www.VMware.com/PDF/vSphere4/R41/vsp_41_dc_admin_guide.PDF

  pages 210 to 215

  You can use OpenFiler as an iSCSI for lab tests SAN

  http://www.Openfiler.com/community/download/

  Thank you

  Zouheir

• Question of Storage vMotion

  Hi all

  Newbie VMware admin here, I hope it's an easy question. I have several boxes of Microsoft SQL I need to move the drive on which the operating system is installed on, they have all RDM attached when I try a storage vmotion, it looks like her wanting to move all the drives instead of one, i have never attempted to move a system with RDM attached to it, but I need to get away from this former storage we have urged. All tips are appreciated thank you!

  Thank you

  You can migrate both at the same time, even if you choose a different destination.

  You're welcome and don't forget brand useful and/or correct answers.

• Storage vmotion very slow

  Storage vmotions run very slowly. The virtual machine that has a 60 GB HARD drive. I tried different storage and still the same result. I have even upgraded to a network of 10 GB with the same results. I opened an evidence of support and the engineer told me vmotion will not use the link in full speed but it seems quite slow for the numbers I get. I hope I have provided enough information below for assistance. I hope that it is something I am doing wrong...

  Hosts:

  3 x ESXi host. Two are updated to version 6.0 1 and a version 5.5.

  Dell PowerEdge R610

  Xeon E5540 - 8 x 2.53GHz

  48 GB OF RAM

  10 GB for storage and vmotion traffic

  4 x 1 Gb NIC for vm traffic interconnection

  All storage is on the shared storage. The only local thing is the operating system

  VMware EVC mode for the production of Intel's Nehalem.

  Storage

  Supermicro NAS 2 to 4 x 4 RAID 10 storage pools

  Integrated 10 GB NIC

  QNAP TS - 469U - PR to 4 x 4 RAID 5 NAS

  2 x 1 GB NIC aggregated link

  Network

  All 3 hosts and NAS are connected with a Netgear dedicated 10 GB switch (low-end model).

  Using a standard vswitch

  Problem

  1 ESXi host has a computer virtual stored on storage on NAS Supermicro 1 pool. When a storage vmotion is running on a virtual machine that has a 60 GB VMDK, it takes a long time to complete. He started at 09:36, and is now 61% fine at 10:58.

  2. the network of 10 GB is where the vmotion traffic is allowed.

  3. If I use a link to 10 GB or a 1 GB link, I get the same speed.

  4. I have disabled all VM at a time given for the trial and who has not helped either.

  5. I tried a QNAP so storage vmotion, and I get the same speed.

  I use connection CAT6A cables. I have fine tuned for storage, and it seems to work better now. Seems to be linked to "writing - sync" as ESXi.

• Sequence of migration for storage vMotion?

  Hello

  I'm moving a couple of virtual machine data to another store.

  I noticed that different virtual machines get different status, such as:

  Copy of the files of virtual machines

  The active state of VM migration

  Resources currently used by other operations... Pending

  I know that it should migrate the active state of VM and then copy the files from the virtual machine.  However, for a machine virtual, it is already 67% current but status is always "the active state of the Virtual Machine migration."

  Is there that an article mentions the details of Storage vMotion?

  See you soon

  Resources currently used by other operations... Pending

  This is because for each host, we have 2 simultaneous storage vMotion migration limits, so if you raise more, system will be queued.

  about the documents, please see suite PDF, this technical white paper concerns the performance and best practices, but it has rather nice, explanations on memory storage Migration and VM migration.

  https://www.VMware.com/files/PDF/Techpaper/VMware-vSphere51-VMotion-perf.PDF

• Storage vMotion a VM except disk that is in another data store

  Hello

  I'm looking to convert a large number of virtual machines clones related to thick.  I decided the best way to do this is probably a simple a storage vMotion, but all the virtual machines have a secondary drive that is in another data store.  I have to make sure that disk #2 stays at its current location, while the machine virtual (Config and disk #1 files) are transferred to a new data store data store.

  I figured out how to move a virtual machine complete or a single disc but not a virtual machine under a disc.  I am able to make it through the advanced options of puissancela vSphere client so I guess it is techinically possible.

  Pointers or other ideas would be greatly appreciated.

  Kind regards

  Ty-

  You will need to use the API method, see for example Re: using several data stores, cannot migrate the vmx file in a data store

• Storage vmotion esxi 5.5 to 6.0 does not not for some vm

  In a test cluster with 2 nodes with no storage storage shared (local only), host vmotion 5.5 to 6.0 host does not work.

  before the upgrade, I moved all the vm to a host.

  Then I upgraded to 6.0 host and tried to move all the VMS to the host 6.0 updated (moving host + storage).

  20 VM, 5 have been moved to the new host.

  Everyone always get error below.

  The VM Client are all the vm version 10 (but some of them improved 8 or 9).

  ClientOS Windows 2008, 2012 r2 and linux. Some with vmx3, some with e1000.

  The machines can be moved when turned off.

  After the off-vmotion, storage vmotion from 6 to 5.5 and return of 5.5 to 6 works again.

  < code >

  Failed to copy one or more of the disks in the virtual machine. See the journal of the virtual machine for more details.

  Impossible to implement disks on the destination host computer.

  vMotion-Migration [-1408040447:1427943699552189] konnte nicht den Stream-Keepalive read: Connection closed by remote host, probably due to timeout

  Beim Warten auf Daten Fehlgeschlagen. Fehler 195887167. Connection closed by remote host, probably due to delay.

  < code >

  VM - log:

  < code >

  2015-04 - T 02, 03: 01:34.299Z | VMX | I120: VMXVmdb_SetMigrationHostLogState: transits State hostlog of immigration to migrate "at source" mid 1427943699552189

  2015-04 - T 02, 03: 01:34.307Z | VMX | I120: MigratePlatformInitMigration: file DiskOp set to /vmfs/volumes/526d0605-8317b046-f37e-0025906cd27e/test1/test1-diskOp.tmp

  2015-04 - T 02, 03: 01:34.311Z | VMX | A115: ConfigDB: parameter migration.vmxDisabled = 'TRUE '.

  2015-04 - T 02, 03: 01:34.326Z | VMX | I120: MigrateWaitForData: waiting for data.

  2015-04 - T 02, 03: 01:34.326Z | VMX | I120: MigrateSetState: transition of State 8 to 9.

  2015-04 - T 02, 03: 01:34.467Z | VMX | I120: MigrateRPC_RetrieveMessages: was informed of a new message to the user, but cannot process messages from State 4.  Leaving the message in queue.

  2015-04 - T 02, 03: 01:34.467Z | VMX | I120: MigrateSetState: transition of State 9 to 10.

  2015-04 - T 02, 03: 01:34.468Z | VMX | I120: MigrateShouldPrepareDestination: remote host does not support an explicit step to prepare migration destination.

  2015-04 - T 02, 03: 01:34.469Z | VMX | I120: MigrateBusMemPrealloc: BusMem complete pre-allocating.

  2015-04 - T 02, 03: 01:34.469Z | Worker #0 | I120: SVMotion_RemoteInitRPC: completed.

  2015-04 - T 02, 03: 01:34.471Z | Worker #0 | W110: SVMotion_DiskSetupRPC: related disc expected but not found for the file: /vmfs/volumes/526d0605-8317b046-f37e-0025906cd27e/test1/test1-ctk.vmdk

  2015-04 - T 02, 03: 01:34.471Z | Worker #0 | W110: MigrateRPCHandleRPCWork: callback RPC DiskSetup returned UN-successful State 4. RPC fault.

  2015-04 - T 02, 03: 01:34.493Z | VMX | I120: VMXVmdb_SetMigrationHostLogState: hostlog transits of State to fail to migrate 'from' 1427943699552189 environment

  2015-04 - T 02, 03: 01:34.502Z | VMX | I120: MigrateSetStateFinished: type = 2 new State = 12

  2015-04 - T 02, 03: 01:34.502Z | VMX | I120: MigrateSetState: transition of State 10 to 12.

  2015-04 - T 02, 03: 01:34.502Z | VMX | I120: Migrate: list cached migration error message:

  2015-04 - T 02, 03: 01:34.502Z | VMX | I120: [msg.migrate.waitdata.platform] failed waiting for data.  Error bad003f. Connection closed by remote host, probably due to delay.

  2015-04 - T 02, 03: 01:34.502Z | VMX | I120: migration of vMotion [vob.vmotion.stream.keepalive.read.fail] [ac130201:1427943699552189] failed to read streams keepalive: Connection closed by remote host, probably due to timeout

  2015-04 - T 02, 03: 01:34.502Z | VMX | I120: Migrate: cleaning of the migration status.

  2015-04 - T 02, 03: 01:34.502Z | VMX | I120: SVMotion_Cleanup: cleaning of XvMotion State.

  2015-04 - T 02, 03: 01:34.502Z | VMX | I120: Closing all disks in the virtual machine.

  2015-04 - T 02, 03: 01:34.504Z | VMX | I120: Migrate: Final status, who reported the force.

  2015-04 - T 02, 03: 01:34.504Z | VMX | I120: MigrateSetState: transition of the State 12-0.

  2015-04 - T 02, 03: 01:34.505Z | VMX | I120: Migrate: Final status, which reported VMDB.

  2015-04 - T 02, 03: 01:34.505Z | VMX | I120: Migrate Module switch has failed.

  2015-04 - T 02, 03: 01:34.505Z | VMX | I120: VMX_PowerOn: ModuleTable_PowerOn = 0

  2015-04 - T 02, 03: 01:34.505Z | VMX | I120: SVMotion_PowerOff: does not not Storage vMotion. Nothing to do

  2015-04 - T 02, 03: 01:34.507Z | VMX | A115: ConfigDB: parameter replay.filename = «»

  2015-04 - T 02, 03: 01:34.507Z | VMX | I120: Vix: [291569 mainDispatch.c:1188]: VMAutomationPowerOff: power off the power.

  2015-04 - T 02, 03: 01:34.507Z | VMX | W110: /vmfs/volumes/526d0605-8317b046-f37e-0025906cd27e/test1/test1.vmx: cannot remove a link symbolic/var/run/vmware/root_0/1427943694053879_291569/configFile: no such file or directory

  2015-04 - T 02, 03: 01:34.507Z | VMX | I120: WORKER: asyncOps = 4 maxActiveOps = 1 maxPending = 0 maxCompleted = 0

  2015-04 - T 02, 03: 01:34.529Z | VMX | I120: Vix: [291569 mainDispatch.c:4292]: VMAutomation_ReportPowerOpFinished: VarEtat = 1, newAppState = 1873, success = 1 additionalError = 0

  2015-04 - T 02, 03: 01:34.529Z | VMX | I120: Vix: [291569 mainDispatch.c:4292]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 1 additionalError = 0

  2015-04 - T 02, 03: 01:34.529Z | VMX | I120: Past vmx/execState/val of poweredOff

  2015-04 - T 02, 03: 01:34.529Z | VMX | I120: Vix: [291569 mainDispatch.c:4292]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 0 additionalError = 0

  2015-04 - T 02, 03: 01:34.529Z | VMX | I120: Vix: [291569 mainDispatch.c:4331]: error VIX_E_FAIL in VMAutomation_ReportPowerOpFinished(): unknown error

  2015-04 - T 02, 03: 01:34.529Z | VMX | I120: Vix: [291569 mainDispatch.c:4292]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 1 additionalError = 0

  < code >

  Any idea to solve this problem? Maybe it's a bug with vsphere 6.0

  Given that some machines were functioning and vmotion later in both directions from 6.0 to 5.5 works, I think that is no configuration error.

  Hello

  It seems that there could be a bug or that guests have difficulties to negotiate the transfer of drive on a network. VMotions storage are carried out via the management network (limitation of hard due to the codification)-are you sure that management networks are not overloaded or that they operate at the desired speed? This also happens with machines that have actually disabled followed block? It seems that this could be a problem.

  In addition, you use the 'old' client or Web client? It is possible that some features in vSphere 6.0 may have been omitted in the old thick client.

  Below are the errors:

  2015-04 - T 02, 03: 01:34.468Z | VMX | I120: MigrateShouldPrepareDestination: remote host does not support an explicit step to prepare migration destination.

  2015-04 - T 02, 03: 01:34.471Z | Worker #0 | W110: SVMotion_DiskSetupRPC: related disc expected but not found for the file: /vmfs/volumes/526d0605-8317b046-f37e-0025906cd27e/test1/test1-ctk.vmdk

  Thanks for the answers in advance and good luck!

• storage vmotion 4 1 TB vmdk to a new data store 4TB on 5.5

  All,

  Benefit in performance if the 4 storage vmotion VMDK located on 4 separate data warehouses in a newly created 4TB data store. with 5.5 capacity 62, I was hoping that someone could tell me.

  I appreciate it

  Well well, the response - as before - is "it depends...". ».

  If you want to use a large drive or multiple small disks depends on the structure of data. If you can not divide the data into departments for example, projects, home/profile,... you can be better with a single large disk. Don't forget to use a GPT partition table, and you need to check if for example your backup software can handle that. Some image/VM based backup applications can backup and restore virtual drives very well, but do not have the ability to file level restore! Also don't forget that - disaster - restoration such a large virtual disk will take a significant amount of time during which data is not available for users. If the data structure allows to distribute to several virtual disks (you can always use DFS to present the data through a single share), I prefer this over the large virtual disk. With the smallest disks virtual, you will certainly have to watch each of them for free disk space, but you can increase the size of disk individually and restoration of a single virtual disk can be done much more quickly (with other discs still online / available to users).

  André

• double control system - storage vmotion with or without storage in common?

  If I have a cluster of existing (vsphere 5.1), where 5 guests are all connected to the FC storage, and then I create a new cluster (managed by the same vcenter) with its own storage space, and leaders of each group DO NOT access other cluster storage:

  I can storage vmotion a computer virtual from one cluster to another?

  Y at - he of the opposition? Takes if press the company or company longer? The servers are in the same cluster, or is simply to be managed by the same sufficient vcenter?

  Hello

  It is possible to check this: VMware vSphere 5.1

• Where can I download Storage vMotion Plugin?

  Hello guys,.

  I'm looking to download Storage vMotion Plugin in vmware.com but I can't find...

  I have the vCenter Server version 5.1 Build 1235232... Is there something I missed?

  Thanks in advance for your answer

  Best regards

  
  

  Storage vMotion to migrate a virtual machine to another data store.  VMotion allows you to migrate a virtual machine to another host.  If you want to migrate a virtual machine to another host and store data at the same time, the virtual machine must be stopped.

  Also, please do not forget to mark answers useful and accurate.

  Thank you

• flying over the vmdk files after storage vmotion

  People,

  I finished a few vmotions storage and I see that there are some vmdk files left belonging to a virtual machine by flying over in the source data store.

  Storage vmotion however was very good. Time last modified files are several months old.

  If the vmdk files are old players was dismantled some time back?

  There are also a few - zdump.000 left side files in source data warehouses. should you be worried about those?

  Rahul-

  Although I suppose the files are orphans, I always double-check for use before deleting. Virtual disk file (hard) can be changed only in case Active snapshots exist for them. What you can do is run RVTools, to see if these files appear as 'Zombies' and if so, I would say you first create a subdirectory and move the "orphans" files above and - if everything continues to work as expected - delete at a later date. Alternatively you can check the vmware.log of the virtual machine file to see if the files appear here.

  Zdump files are created if something unexpected occurs. However, it is difficult to say what the brought to be created and if they are old and have any problems, you can delete just them.

  André

• Storage vmotion without vCenter

  Friends,

  I know that we cannot make a svMotion if we do not have a vCenter server.

  What are the other ways to go about this. I found a blog in it?

  http://www.virtualizetips.com/2010/04/15/how-to-move-a-VM-without-vCenter-or-storage-VMotion/

  Is this a way full proof?

  Rahul-

  Hello

  Yes, it will work fine, if all the virtual machine files are in this folder.

  If you have multiple VMDK, on different data warehouses and want to move all, it will get a bit more complicated.

  Tim

• Storage vmotion, between data warehouses when the block size is different

  Hi all

  I would like to know, is it possible to do a vmotion of storage between two data warehouses, when they have different block sizes. The case is as a former vmfs data store 3 which has been upgraded direct to vmfs5 there, but since it has been updated it maintains its own block size. While the newly created vmfs datastore 5 a block size of 1 MB.

  Thus, storage Vmotion will work in this case? It will fail OR will be with degraded performance?

  Finally, storage vmotion is possible even if you do not have a cluster DRS for storage?

  Thank you

  Yes you can!

  Check some info on the effects of block size: http://www.yellow-bricks.com/2011/02/18/blocksize-impact/

• Storage vMotion to vCenter

  I have a Windows 2008 VM for vCenter on my lab. I'm under ESXi 5.1.

  I would like to know if it is possible to storage vMotion this Windows 2008 VM to a different data store, without losing of damaging vCenter server.

  I use Express database on Windows 2008.

  Yes, if your vCenter is licensed for Storage vMotion you can do it without problem.