STR-DA5700ES no video/audio HDMI inputs no

Similar Questions

• Dell inspiron one a HDMI input with output usb audio

  Hi, I recently bought a dell inspiron one 2330 and some of my blu - ray high-fidelity discs do not work very well at all. :(un peu déçu car c'était la principale raison que je l'ai acheté.)

  So I tried my blu - ray player in the HDMI port, but now it only uses the computer speakers not my B & W Zeppelin air via the USB input.

  If advice how to fix the blu - ray glitch player that seems to start and stop on most of my records or produce audio output to HDMI input to the USB port would be much appreciated

  Thanks in advance.

  Which seems to indicate a problem with your video card. The cooling works may not properly. I would contact Dell on the replacement of it. This may explain the poor video performance.

• No Digital Audio output when Internet Streaming on STR-DA5700ES

  I have a STR-DA5700ES I bought precisely because it has a digital Toslink out.  I used to use this connection on old receivers to connect to my Sony MDR-DS6500 7.1 headphones.  The headset unit accepts a digital Toslink connection to listen to the audio Dolby Digital.

  I can listen to Dolby Digital happy when I watch TV, because it generates the audio of the Toslink out and my helmet.  However, when streaming a movie Internet through the STR-DA5700ES with audio 5.1, it comes out not audio for the Toslink on.

  Am I missing something here?

  Hello

  Unfortunately the receiver works as expected and will not digital audio (HDMI or optical) from all the internal dissemination services. The receiver expects that you will use it connected speakers to listen to surround audio, or the taking of headset available on the front. There is not a firmware update available or planned that the receiver has been designed to work this way and can be changed by modifying the software.  Keep in mind that it is impossible to get 5.1 surround sound 2 headphones to listen to the speakers, the surround effect is 'Virtual' or 'simulated '.  As a work around you can use a media player that allows an external output optical to your TV if it offers streaming services, or head Jack on the front of the receiver that was planned for this exact purpose. I'm sorry for the inconvenience that this has done and have relayed concerns to the right team

• 52 "Regza TV Audio - HDMI-output optical audio problem does not

  Hello

  friend of mine has a Regza 52 "LCD TV.
  She's trying to connect its apple TV & Optus Fetch device (cable TV) on the HDMI inputs and then having the audio outpot of optical fiber audio outpot to his BOSE amplifier.

  My understanding is that when you select an HDMI input, then the video and audio must be addressed.
  So you should see the video on the HDMI channel and need to hear the sound.

  What is happening is that she sees the video selected on the HDMI channel, but not audio, the sound heard is actually free in the atmosphere of television station that had been retained.

  We tried all the TV menu options successfully.

  How do we get the optical audio output to be on the instructions of the HDMI input?

  Thanks for the help
  Peter

  Hi Peter

  All this should not be so complicated. Using an HDMI cable, you can transmit video and audio to external device to TV signals. For example, if you use the HDMI 1 port and turn on the V you should see the picture and hear the sound of the TV.

  For audio, you can use an external device like Hi-Fi receiver or this BOSE amplifier. Using the optical audio output of fiber on your TV, you should hear the TV sound look no matter what external device is the source or which channel you. What you see on the TV the sound comes through this amplifier.

  I have this BOSE unit, but all I know is that when you want to hear his amplifier the right port or channel must be enabled there.

  I use my Toshiba TV connected to the Yamaha V537 amplifier with optical cable and it is listed under AV4 port. So when I want to hear the sound on my Yamaha I need to enable port AV4 on it and its is here.
  Some additional settings on the TV are not necessary. Optical output on the TV is always on (see the red light on the inside).

  Check this please on BOSE amplifier.

• Laptop HP TouchSmart 15: Audio HDMI notworking

  Hi team,

  After the upgrade to 1604 10 update Audio HDMI windows does not work in my PC laptop HP TouchSmart 15,

  non - model E6F34PA #AB4

  I tried almost all possiblties Google serach.

  1 put updated driver from compmgmt.msc

  2 re-ntsall IDT Audio driver of Intel

  2. use of the easy software I have updated all drivers.

  but it still shows no Audio HDMI sound source.

  

  When to check event under driver, I found the message below.

  Device HDAUDIO\FUNC_01 & VEN_8086 & DEV_2807 & SUBSYS_80860101 & REV_1000\4 & 2ffee478 & 0 & 0001 requires installation.

  

  could you please help on this issue.

  Thank you

  Riou

  Hello:

  Here's what you need to do to get the HDMI audio to work...

  Download and save, but are not run this graphics Intel W8.1 driver.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63750.exe

  Download and install this free utility for files.  The 2nd file is 64-bit.

  http://www.7-zip.org/

  After installing 7 - Zip, right-click on the file of the Intel graphics driver that you downloaded.

  Select 7 - Zip from the list of items.

  Have 7-zip extract of: and leave it to decompress the file in the file name (sp63750).

  After 7-zip created the driver folder, go to the Device Manager and click on the Audio device high definition with the! Select this option.

  Click on the driver tab, click on set to update driver.  Select her browse my computer for driver software option and navigate to the driver 7-zip created folder.

  Make sure that the include subfolders is selected and the Intel HDMI driver should install.

  Then restart the PC, and you should have video and audio plays from the HDMI port output.

• Toshiba 32TL838: flicker after fw upgraded in the menus, using HDMI input

  Hello

  yesterday I updated firmware of my 32TL838 to version 6.4.0Y.1 / 94.6.27.8 using the upgrade feature network.

  After the upgrade, I reset the TV to start again with the factory settings.

  During the quick installation after the reset, I noticed a very bad video quality. The entire image flickered, had a ghost effect and looked at interlaced. The menus were almost illegible.

  Once the installation is complete, the TV switched TV (cable DTV) normal mode and at least the TV picture looked quite normal. While the input CABLE is selected, I can also open menus as before, they are displayed correctly.

  But as soon as I switch to the HDMI input, the image becomes nuts once again, just like during the initial installation, including recoveries of TV menu. Sometimes it becomes stable for maybe 30 seconds, but then he is paralyzed again.

  A few words about my setup: TV uses only input HDMI 1 and the cable entry, nothing else is connected.
  Links to HDMI input to a receiver Onkyo TX - SR508 AV which is powered by a Fantec 3DS4600 media player and the Blu - Ray BDP - S373 player.

  Because I expect the question of what-to-your-HDMI-wiring, I traded the HDMI cables but as expected which has not helped at all.

  At least, I seem to be successful by bypassing the problem when you use the Fantec drive.

  Before I updated the firmware, I was able to use the drive with 1080 p/60 Hz and the player has been installed as a result.

  Now I switched to 1080 p / 50 Hz, and the video image seems OK again. (However, I made a short test and as I said, sometimes_
  the image is OK for a short period).

  Unfortunately my BluRay player has no menu to change the frequency, so I watch BluRay or online services, the player offers, is impossible.

  So, what can I do now? A downgrade of firmware (if possible) would be a quick temporary workaround I could accept. But medium-term I'm expecting Toshiba to restore functionality that they promoted and for which I paid.
  (Youtube stopped working with the old firmware and it seems that 1080 p/60 Hz no longer works with the latest firmware).

  Anyone know how to downgrade the firmware using a USB? I already downloaded the previuos version tl838_853886.bin but I do not have a nail how (and if) it can be installed.

  Thanks for your advice
  BELEKTRO

  Hello

  As far as I know the isn t possible downgrade firmware.

  But you said that you noticed this problem by using an external device connected to the HDMI 1 port.
  As far as I know the Toshiba 32TL838 supports 4 HDMI ports.
  I recommend you to check all of the 4 HDMI ports as well as to check all device configuration options.

  Check for example the rate of active movement + option available.
  This option allows to improve the rate of cooling of a TV

• STR-DH520 component video

  I just moved into a house where they have a line consisting of the closet to the tv area. I have a Sony Bravia HD TV which has been great to work for a few years. I don't want to pull a HDMI cable in the tube where the sons of component are so I went and bought a Sony STF-DH520 a / audiovisual receiver. I hang a DVD and a Comcast HDMI in HDMI input on the receiver ports and plug a HDMI to the TV output. Works very well.

  I then try to use the Monitor Out on the receiver and connect a component video (red, blue, green) and I get no video on the TV. Then I try just the (composite) video cable to the video output on the back of the av receiver and no luck there.

  Did I miss something until I take this thing back to the store? Page 21 of the manual shows that I can have a HDMI or Component out to my TV output. It should work.
  http://store.Sony.com/wcsstore/SonyStyl... 248878.PDF

  Thanks for any help,
  Tom

  from page 22 in your manual
  "Entry of video signals to HDMI IN may
  only be transmitted via the HDMI TV OUTPUT
  Jack. Video input signals cannot be
  exit through the VIDEO OUT jacks or
  MONITOR OUT taken. »
  I think it is the way that most all receivers work. I would run the HDMI.

• Acer E5 problem audio hdmi 571G

  Please tell me why when I connect to a TV with an HDMI cable, I have the video signal, but not his!

  I have the latest driver update(video,audio,all)!

  In (audio) playback devices, Digital Audio (HDMI) (not connected) gray apear and I can ' t change anything! "

  The cable is good because works(video+audio) with another laptop and even TV!

  Help, please! I'm updating the bios, installing and reinstalling drivers... nothing works...

  the last things to try, if you haven't tried to alread:

  Uninstall the Intel drivers and check if the HDMI reading is always there and check if it works

  Uninstall the nvidia drivers and check if the HDMI reading is always there and check if it works

  She has some problem of drivers, but without the cell phone in the hands, it is very difficult to restrict the question.

• No audio HDMI with Windows 7 Ultimate

  Since the departure of Vista with Windows 7 Ultimate, I lost audio HDMI.  I can connect video successfully to my Sony KDL46VL150 but will not come out through the home theater system.  It comes via the laptop.  I tried to update the drivers, but clearly, I have not found the right pair.  I tried as well through the website of HP, and Intel.

  The audio drivers in the system are now:

  Stwrt64.sys IDT High Definition Audio CODEC Version 6.10.6276.0

  Intel(r) High Definition Audio HDMI IntcHdmi.sys Version 6.10.0.2056

  I suspect that the HDMI driver is not 64-bit.

  Any other suggestions?

  Thanks for the tips.  I downloaded the drivers and the saved on the desktop as you suggested.  However, I could not find the graphics driver as you have described.

  I also followed the following suggestion I had to re-boot with the HDMI cable connected to the TV and it worked.  I see now that I have 2 identical drivers (Mobile Intel 4 Series Express Chipset Family) loaded in graphics cards.

  In any case, the problem is resolved.

  Thank you very much.

• Laptop HP Pavilion 15 t W0P57AV: Audio HDMI problem

  I have a new laptop that I just got ordered directly through the HP site. I plug the HDMI cable and plug the cable on my TV and I get no sound on my TV. I already have a click with the button straight on the volume icon and selected playback devices and there is no device audio high definiion listed. I also have a click right and select Show Disabled/switches and nothing appears.

  How is it possible to have a new laptop with no Audio HDMI capabilies? Help, please. I tried to figure this out for days.

  Hello:

  See if reinstalling the Intel HD audio driver and restart the PC solves the problem.

  The graphic driver install the HDMI audio driver.

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  http://ftp.HP.com/pub/SoftPaq/sp76501-77000/sp76613.exe

• Apple TV is no longer active in order to correct the HDMI input

  Before the last gen 4 apple tv update, when the apple tv was turned on, the TV should be enabled (we have an older Sony Bravia) and passed to the HDMI input used by the apple TV. With the latest version of apple tv, the TV is turned on, you hear a click (as if the apple tv has been trying to pass the HDMI inputs) but used the HDMI input on the last remains. The HDMI input for the apple tv is never bound by the apple tv.

  Everyone has noticed this problem with the latest update to apple tv? I missed a configurable option that must be specified for the behavior of earlier versions of gen 4?

  Apple: Please restore the nice feature that existed before the last update to apple tv.

  Works fine on my system. How HDMI CEC depends on television, check to see if yours is an update. This is a user forum, you're not address Apple here.

• FireWire/s-video/component/HDMI for Mac 'nine '.

  I have a camera Sony HDV 1000U, which connect via Firewire, s-video, component and HDMI. My computer is a 21.5 late 2011 Mac. I have asked a few things.

  1. I am aware of the existence of a sudden lightning for ieee. It works by importing data from the camera to the computer? Or it works only as output (from a computer to another device).
  2. Is there such a thing as a device that converts Firewire/s-video/component/HDMI to a Mac?
  3. A capture card would work for the HDMI?

  You can use a bolt of lightning > Firewire adapter. I use one with two external hard drives and a DVD reader/writer. It works in two ways. You can also simply remove the SD card (if it uses one) and use a USB to plug into a Mac - card reader is my favorite way, because it is easier to deal with than to try to connect a camera. I know not all adapter that includes HDMI on a Mac.

• When using a 2010 macbook pro and a mini display port to hdmi adapter, will be the macbook pro display be sent to a TV that has hdmi inputs, or do you need a keyboard command

  When using a 2010 macbook pro and a mini display port to hdmi adapter, will be the macbook pro display be sent to a TV that has hdmi inputs, or do you need a keyboard command

  Yes it will be displayed.

• Satellite A105-S4064 - need drivers XP for LAN, video, Audio

  Hello

  I recently had to do a clean install of my Satellite A105-S4064 and have had problems to get the right drivers for it.

  On the Toshiba site, it lists only 4 drivers for XP for my model, even if that's what it came installed with. The video driver list and sound do not yet work for me.

  I need drivers for the modem, LAN, video, Audio, please.

  Any help would be a great help!

  Thank you

  Ken

  Hello

  On the page of the Toshiba driver we you can find the right driver for XP graphics card.
  At the moment the page provides a display driver nVidia GeForce (v83.02, 19/01/2006)

  I also found a driver of his right. It s a Realtek audio driver.
  If you need a more recent version, then I recommend to visit the site Web of Realtek and download the newest one.

  But note; the XP SP2 operating system needs and before install you the audio driver you must first install the Microsoft Hotfixes; KB888111 and KB835221
  After the installation of these two patches, you can follow with another audio driver installation.

  It also seems that this notebook would support an Intel PRO/100 VE Network Connection - 10/100 Base-TX Lan card
  So, you can visit the Intel page to get the right Win XP driver for this Lan chip.

  Good bye

• I recently bought Apple TV but the TV I want to hang up to does not have an HDMI input.  I bought a converter HDMI cord at Radio Shack, but it did not work.  Any suggestions?

  I recently bought Apple TV but the TV I want to hang up to does not have an HDMI input.  I bought a converter HDMI cord at Radio Shack, but it did not work.  Any suggestions?

  You may be able to find a connector to work but which would not guarantee that he would not stop working on the road. Minimal tech spec of the ATV4 is a HDMI connection to the tv. My recommendation is to upgrade your TV rather than trying to get a square peg in a round hole. That's just my 2 cents...