Str-dn1020 receiver, back surround sound.

Similar Questions

• Sound of television through Sony STR-DH130 receiver

  I recently bought a receiver SONY STR-DH130.  As with my previous receiver (an old Kenwood 3090) I have connected it to the top so that the sound of my SONY's Trinitron TV through the receiver to separate the speakers.  However, unlike with my Kenwood 3090, I can't control the volume separately to the speakers.  I can only control the volume of the receiver speakers via switch on the satellite to the receiver.  The sound of the television is stronger than my receiver speakers and smother them.  Therefore, I don't get a good stereo separation.  With my Kenwood 3090, I could put the TV on mute and listen to the sound of the TV through my receiver speakers (which are much better).  Any way to do cela with the SONY STR-DH130.

  Thanks in advance

  Bookman

  If your audio connection cords catch AUDIO OUT of the Sony KV24FV12 TV to the AUDIO IN ports of your STR-DH130 A / V receiver then you can turn off the TV speaker, AUDIO OUT option FIXED value so that you can adjust the volume of the TV via the remote control of your receiver. (see pages 19 and 20 of the TV Manual)

• Not Surround sound more on Blu - ray player after upgrade by MediaSmart

  When I used the Blu - ray player in my home theater, I selected the mode "HDMI pass" to get a sound surround. I came across a few new films that would not play and after the update from HP, the player would simply freeze as soon as there is audio present. I had to go to the Task Manager to close it.

  MediaSmart works fine on the laptop, but it only freezes when I use the parameter "pass through HDMI.

  I tried mode "HDMI pcm" and who does not work either. This Denon receiver there are five channels work but I get stereo sound on front speakers left and right. This seems to indicate that the Blu - ray player is not released in 5.1 surround sound and the laptop and the Denon receiver works fine.

  Supports the HP solution was to reinstall the older driver or try a system restore. I know that a system restore won't do anything. The problem is in the new software. The new software does not work on my HDX18 when he was under Vista, it did not work when I upgraded to Windows 7 and it does not work on my new dv8.

  I tried to contact CyberLink to let them know that the upgrade is giving problems, but I think they ignore me.

  Personally, I think that HP or Cyberlink just forgot to add the drivers for a 5.1 and 7.1 surround sound.

  If anyone find a solution to this one that I wouldn't be surprised. I'm quite sure I've covered all the possibilities, but you never know.

  Any help would be appreciated.

  Thank you

  HP had me download a software called K-Lite which is a software codec repairs and replacement. After the upgrade of the software more returned to get my blu - ray movies to work, I ran K-Lite and that did the trick.

  http://www.codecguide.com/download_kl.htm

  I used the mega version, but you can probably use the standard.

  It is a software complex with many choices and I changed it to accept a sound audio surround and DTS 7.1. There were several boxes prompting me to remove the broken codec which continued for some time and when it was all thanks to I was surprised that it worked.

  Meanwhile CyberLink itself actually got back to me and I was given some temporary free software provide I run their diagnostic tool for them on my dv8 for helping them understand my problem. It is still pending.

• 5.1 surround sound problems

  Now I know that a lot of people posted something on this topic, but have not received any concrete answers.
  Motherboard: MSI z77a-g43
  Sound: Realtek latest driver 6.0.1.6823 from 13/01/2013
  Similar problems with the rest of the people.
  5.1 surround speakers, but only before back works do not work unless you check "Speaker Fill"
  But although the pretty bad, bad sound quality coming from the rear.
  I checked the output and inputs for audio is OK.
  Setting Windows sounds I configured the surround sound 5.1 speakers and tested all individual works of speakers/sup.
  I checked for the latest player, yes I have the disc.
  I made sure the volume is 100% according to noise levels, even the etc rear black rear gray all balanced.
  Even messed with improvements and all nothing.
  Now here's the catch, YouTube all my work of speakers, on some applications that was basically a 2.1 speakers.
  That said I unchecked give it some control over the application of the thing of the device. Nothing has changed.
  Windows Active update hoping that they would have something about this but nothing related.

  So is Windows 7 or Realtek problem?.
  I just bought these speakers in the hope of a 5.1 full surround with all applications, just very frustrated, I spent $ 100 on something that will not work correctly. (Yes, people spend more).

  Anyway could someone help me solve this problem?
  As a real answer instead of the entire test / configure the response of the speaker.

  I thank very you much.

  Windows media player?
  BF3?
  event?
  VLC?
  CSGO?
  3dmark11?
  Mumble works well. (another program similar to the wind)
  Steam works
  Basically, it shall decide on its own.
  And prettyyyy im sure that these programs all provide support for 5.1...

  Then in VLC - no matter what you play (even files that you know the sound coded by the author OR by a spectator codec 5.1 any)-No 5.1 audio?

• No. 5.1 surround sound HDMI

  Problem - I don't get that ' "two-channel stereo sound during playback of a DVD (with Dolby) on my computer.  The computer is connected to an audio receiver that is set up for a surround sound.  Audio and video signals are transmitted from the PC via the HDMI 8.Lorsque on the video/tuner card.

  Computer - Compaq SR7510F

  Vidéo/Tuner - ATI All in Wonder HD

  Connected to Onkyo TX-SR604 through a video/Tuner card HDMI cable.  The Onkyo receiver is connected for 5.1 surround sound speakers.  Video signals are transmitted via the receiver to a flat screen monitor

  Sound - onboard Realtek

  According to the specifications for the SR5710F it is supposed to support its 6 speakers.  However the HDMI audio driver only allows me to select "stereo".  It is a select "surround" box, but the box is "grayed out".

  When I play the same DVD using a stand-alone DVD by Phillips drive, connected to the Onkyo receiver with the same HDMI cable, I get Dolby on the receiver.  This means that it is not a problem with the receiver, it must have something to do with 1) onboard Realtek sound driver 2) HDMI, or 3) the HDMI connection on the video/tuner card.

  I checked on the Web from Realtek site and they list a newer driver for Vista (32 bit), but when I use the Device Manager to update the driver, it is said that it is the most recent.  I don't know that the driver is the problem, so I'm hesitant to try for the heck of it.

  I tried the latest drivers Catalyst 9.1 for ATI All in Wonder card, but that didn't help either.

  Any idea?

  Telefunken,

  Thanks for the suggestion.  It worked!  There is absolutely no sense to me, nor it does not seem logical to select SPDIF, but I can't argue with success.

  I didn't need to buy Arcsoft Media Theater.  I was able to select SPDIF with ATI Catalyst and Microsofts Media Center.  I could get Dolby

  In my current setup, I updated ATI Catalyst 9.3 version graphics card and loaded the audio driver Realtek HDMI ATI R2.18.  Also in the BIOS, I put the Audio on 'Auto '.  I chose the HDMI, not the Realtek driver driver in Control Panel.  I chose Dolby and DTS bothy under the driver settings.

  Now I think I'll enjoy a Quantum of Solace from this nagging problem is resolved.

• Just not upgraded for Windows 10, 7.1 Surround Sound no more functions

  I use a Logitech G633 helmet, which is compatible with a 7.1 surround sound. Before moving to Windows 10, one worked perfectly well with Skype and my sound quality surround sound was crystal clear. After the upgrade to Windows 10, Skype does not use surround sound and instead, I'm treated with bad stereo audio.

  Everything else on my computer always uses one surround sound, except Skype. This problem is only with Skype.

  I tried to reinstall the Skype and Logitech software, with no result. I am at a loss for what to do and if I can't find a solution I'll down(up?) level to Windows 7.

  I already tried to install a version of LGS that dates back all the way to March 2015, and it did not fix the problem. I was already using the latest software version when I was running Windows 7 and Skype worked fine with one surround sound with Win7.

• a6233. SC - HD surround sound?

  Hi, I bought the a6233.sc about 7 years ago and did not have a reason to replace it since then. I added more RAM and a bunch of external hard drives.

  Now, I'm looking for buy a new receiver surround sound capable of HDMI and HD audio and my PC has become the center of the media associated with over the years, I want to make sure that most of the things she would always keep upward. This read on sites Web HP/realtek/Nvidia I initially thought that it would be no problem: sound card is ALC888S and although there no passage in the functions of HD formats, there no record of 192 kHz/24-bit and I have a software that decodes the LPCM sound. But now I just read an article that made me doubt if the sound card is integrated into the exit HDMI of Nvidia 8600 GT.

  Another question, is my PC has more muscle to handle a Blu - Ray player?

  Any help would be much appreciated I could prioritize significantly differently if things are not as I hope.

  Peter

  I understand that you want to know about the sound card and how it works with the 8600 GT video card HDMI output.

  I am not entirely sure about the line of products from Nvidia, but that's how it works on AMD cards.  The video card has a dedicated sound chip for HDMI audio output, which is separated from the dedicated sound system map.  It has its own drivers and resources in Windows.  It is also separately listed in Device Manager in the sound category.  I think it would be the same for Nvidia products.

  Do a ctrl + f search on this FAQ blu indicates the card 8600 is capable of playing blu - ray.  According to the specifications, the system came with 32 bit Windows Vista that would make the RAM max allowed 4 GB (3, 2-3, 5 GB usable).  If there is a large RAM available, it would seem that this would be sufficient.  The system came with a 2.4 GHz quad core processor which should be wide enough for blu - ray playback.  However, none of this is a guarantee.  Each blu - ray player comes with different reading software.  I recommend to look at the system requirements of the software (which should be listed) and compare that to what your system has.  As long as you are within the reading software, it should be fine.

• surround sound in iTunes

  On my sound Windows 10 PC surround works in Windows Media Player, but not in iTunes. How can I change the config in iTunes?

  I had exactly the same problem and based on iTunes for a solution and after really engage with them, they are back and after testing what they suggested I have now answer that works.  As with all things all he needed was to know what box and the important thing to note is the solution lies not in iTunes, but in a simple setting on your Windows 10 sound settings.

  So the solution is the following:

  First of all, quit iTunes (if open), then go to control panel - sounds - select your speakers (probably failed you device) and then click Properties.  Then click on the enhancements tab and simply check the Speaker Fill box - click on apply and can test to see if you work by using the Preview button.  Surround sound on all 5.1 speakers should play.

  If so the next open iTunes and play your favorite song and it should play in a 5.1 surround sound.

  Hope it works for you - it did for me and is a solution supported by iTunes Support.

  If it does not you spread the word about this solution.

  PS I think this can also solve / resolve 5.1 surround for iMovie and other problems of his fellows.

  Enjoy

  Mike H

• A surround sound to my Satellite A300-S6872

  Greetings!

  I want to use my computer to send a sound signal 5.1 surround to my Onkyo receiver. I have a headset jack SPDIF port size, which I think allows a surround output.

  In addition, when I tested my Realtek digital output device, the green lights will turn on but I have no sound (which I think ' may be the result of bad cables I'm using).

  What do need me and how do I make my exit from the computer a surround sound?

  Thank you!

  Hello

  If you are sure that your laptop supports S/PDIF (digital audio output) to 100%, then you can use the cable like this:
  http://APS2.toshiba-tro.de/KB0/TSB5400YZ0005R01.htm

  If you plugged the A300 cable, then you will need to choose the right output of the Panel-> sound

• No surround sound on Apple TV 4 gen?

  I recently upgraded to Apple TV fourth generation and lost my sound surround.

  My old Apple TV (3rd generation) has been connected via optical toslink to my receiver Onkyo and everything worked well. A 5.1 surround sound.

  Now, I have installed the new Apple TV 4, who unfortunately doesn't support optical output. Instead I connected the th output to my Onkyo HDMI receiver. Whenever I get sound, but only 3.1 (front left, right and Center) but no sound on my surround sound speakers. If I unplug the Apple TV and plug in my DVD player the same HDMI input on the receiver I hear great 5.1 surround. If Im guessing all the settings of the receiver is very well. It's just the apple TV that does not work.

  Why is this? Apple TV supports 5.1 sound more? Is this a known problem and how can it be solved.

  Try adjusting the audio settings Dolby on the ATV4.  Given that my receiver has no HDMI inputs, I went with an optical splitter HDMI and have 5.1.

• 4th generation Apple tv remote keeps switching HDMI 2 if I have my surround sound Samsung anynet on which uses when the samsung TV is turned on. Currently I have away the skin until I found what I want to watch.

  Current configuration is a Samsung TV with a Samsung blu - ray surround sound.  When both are on they use anynet to communicate. Now with the new apple TV 4, any click on the apple TV remote will send my TV HDMI 2 (where the entourage of blu - ray is connected). How can I stop this? The apple TV is HDMI 3. The dressing must be on HDMI 2 which is also ARC (Audio return channel)

  Try to go in the settings of TV4 of Apple and the deactivation of the ability to control your receiver and your TV. This should disable HDMI CEC which resembles its conflict with Anynet.

• Audio Surround Sound System

  Hi all.

  I develop an audio system cockpit of flight 3D to run speech recognition applications. My problem is this: I want to be able to output sound to each stakeholder in the SRS 7.1 individually. In other words, I need to extrapolate on the code that generates the sound output to the left or right of a computer enclosure. I developed a LV code that will do, but when I try to take it to the level following a 7.1 system, I get nothing from beyond the first two speakers. I have notinced that channels detected by the function "Sound File Info" is only two, even if I put the vi "configure the sound output" to seven. I should also mention that the PC sound card provides the output to the surround sound system via a one / audiovisual receiver. Anyone can do the somelight on how I can get the code to see more than two channels and start sound ouputing to each speaker, one at a time? I would really appreciate the help. I also attached the vi that I worked on. Thank you.

  Hi vehnasa1,

  I looked at your code and I was able to get a third speaker to give the output when using a multichannel wave file. I'll make sure that you use a .wav file that has more than two channels in order to get output for speakers spent the first two.

• Surround sound cut during the game Mass Effect 2 on Windows 7 x 64 bit

  Original title: Surround sound cut while in games

  I gathered all my own office.

  Here are a few basic requirements.

  Procoessor: AMD Phenom II 955 3.2x4

  Motherboard: Asus M4A77T/USB 3.0

  Graphics card: Nvidia GTX 460

  8 GB ram

  Here's my problem:

  My surround sound cut while I play Mass Effect 2. Sometimes not entirely; I'll be able to hear the music, but not dialogue. Other times I can hear the dialogue but not the music.

  I use a headset usb (Logitech G35 7.1 w surround)

  What happens if tried:

  Update the bios.

  Update card drivers his (motherboard onboard)

  Update drivers Logitech G35.

  Patchwork of Mass Effect 2.

  __

  In addition, on people of forums to effect mass who use Windows XP disable their hardware acceleration and solve the problem. I can't find this option in Windows 7 x 64.

  :) Help is appreciated...

  Hi korlath,
  First, make absolutely certain that your soundcard Control Panel, but also the sound properties in the control panel are properly configured to use the number of channels you want.
  If you are still having problems and you want audio equipment, follow these steps:
  a. go to your C:\Users\\Documents\BioWare\Mass Effect\Config directory and rename the file to something else BIOEngine.ini.
  (b) launch Mass Effect without running the Config utility. The game will recreate BIOEngine.ini using the default values, and must correctly identify your audio hardware.
  c. in the in-game Audio hardware settings should already be selected - do not change back to audio software or make other changes to the sound settings.
  Note: Audio: If checked, the game uses hardware acceleration that improves the audio quality and performance. I recommend you check this option in most cases, unless you are having audio problems or other problems. In particular, note that you will need to check this option if you have a multichannel audio system and use more than 2 channels.
  Hope this information is helpful
  Kind regards
  Ajay K - Microsoft support
  -------------------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think

• Option of surround sound clothes outside with HD4870 HDMI connection after installation of SP1 Vista54

  Clothes outside with HD4870 and HDMI connection surround sound option
  I just built an HTPC and installed SP1 Vista64 and I have a problem. I have a DFI LanParty very X 58-T3H6 motherboard and a VisionTek Radeon HD 4870 video card with HD audio. I have a HDMI cable to my Sony AV receiver and all I get is Audio stereo. The subwoofer never wakes from sleep, or AV receiver indicates anything but a stereo input.

  I have the RealTek HDMI audio device installed, and he says he's working properly in Device Manager. Under properties, what is proposed is stereo speakers. Surround sound is presented as an option, but it is grayed out and not selectable. All drivers are up to date from four days and I have the on-board sound card mother disabled in the BIOS and it does not appear in the Windows Device Manager, nor are there any other audio device except the RealTek HD HDMI audio device.

  Other HDMI devices, such as my XBOX 360, a surround sound very well via the AV Sony receiver.

  VisionTek support told me to install the RealTek HDMI driver, I did, but that's all the help they were able to give me.  The problem persists.  Surround sound is gray under sound properties for this device,

  I took the HDMI cable from HDMI port on the video card and plugged on my XBOX 360 and I get surround sound, so I know that the cable and the audio/video receiver is configured correctly.

  If anyone has an extra idea about it, I know you more!

  Thank you!

  Hi flattery.

  Thank you for taking the time to post.

  Can you please post here the result of your dxdiag in the forum?

  ·         Click on the Start Orb on the Office

  ·         In the Search box , type dxdiag and press enter

  Once you're in the DirectX tool, click Save all information and save on your computer. Open the saved file (must be a text file) and copy this information and paste it into the forums here so we can see again.

  1. What is the version of the BIOS that you run on your motherboard?

  2 have you ever had this installation or surround sound from always grey work?

  Please let us know.

  Thank you

  Keith
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• No. 5.1 surround sound

  5.1 surround sound

  Hi all

  I have recently upgraded to Windows 7. There is only ONE problem I have, my installation 5.1 surround. I only get response of two front speakers. No Center, no back, no Subs. I went through the Setup program, and when I click on 'test', I get a response on the speakers. However, when I try to use a program (VLC, WMP, opera, OpenPandora, Firefox) I get only sound from the front two. Also, system sounds come out only from the front two. My map 5.1 is on board. I looked for the drivers and tried to install many-to-nothing doesn't. I also searched through applications to see if the 5.1 has been activated.

  Any help is greatly appreciated!

  Hello

  Method 1:

  Try running the sound troubleshooter and check if it helps: Open the troubleshooting of Audio playback http://windows.microsoft.com/en-us/windows7/Open-the-Playing-Audio-troubleshooter

  Method2:

  Try to follow the steps in this link and check if it helps: get high definition sound and music from your computer http://windows.microsoft.com/en-US/windows-vista/Get-high-definition-sound-and-music-from-your-computer (applies as well for Windows 7)