strange behavior of audio w/new AVCHD Sony HXR - NX5U CAMCORDER

Similar Questions

• Someone at - it experience with the Sony HXR NX5u (or p)

  Hi all

  Was wondering if anyone had any experience with the Sony HXR NX5u or P?

  We'll get a little time, and it would be good to know how the workflow was. We "re on CS5 on a new system, built for speed and seems to treat the other cameras without problems AVCHD video.

  As it is AVCHD, I guess that timecode number was not "fixed" again, but it would be good to know if it there first with this camera-specific features.

  Any info appreciated

  Thank you

  As it is AVCHD, I guess that timecode number was not "fixed" again, but it would be good to know if it there first with this camera-specific features.

  Not necessarily; read here. Looks like you're good if you follow the rules

• Strange behavior of audio subsystem after update Dev Alpha 10 to 10.0.9.388

  Hello world!

  Has anyone noticed a strange behavior of the behavior of 10.0.9.388 audio subsystem firmware. Recently, after firmware update Dev Alpha 10 to 10.0.9.388 subsystem audio misbehavies in the following way:

  (1) if the external headphones/speakers connected to the audio line-out looks to be preprocessed by low-pass filter and surround effect. The device reported by AudioManager is/dev/snd/pcmPrefferedp. Would it be a bug in formware and re-routing audio internal speaker to the line-out socket did not exclude specific pre-treatment?

  (2) on the previous firmwares if audio goes out of the internal speaker and then the helmet is connected to Jack line out change of itinerary was seemlesly happening and he kept playing with headphones without additional measures in the application. Now, peripheral audio is not consume audio samples and so crashes until it is closed and reopened.

  On the previous firmwares were not all the problems of this kind. Would be - what a few unlucky flashing firmware try (if it is still possible) or bug of 10.0.9.388.

  It will be good to hear comments & thoughts about these questions.

  Best regards

  Dmitry.

  I suggest to create two entries Issue Tracker: https://www.blackberry.com/jira

• I get a strange behavior of the bar tabs and the address bar in Firefox 29,0 for Mac.

  I just installed Firefox 29,0 for Mac.
  I have a strange behavior of the bar tabs and the address bar with this new version.
  Instead of the address bar, I get two rows of symbols. And it is impossible to write anything in the address bar.
  (I add a screenshot, but I can't find a way to do it).

  Firefox has an RSS icon in the palette of the toolbar that you can drag a toolbar (but not on the location bar container).

  • Firefox menu button > Options/Preferences > toolbars
  • View > toolbars > customize

• Issues coming out of "sleep mode" and strange behavior when restarting with GPU

  I use a desktop computer HP P7-1240 completely stock except for a GPU EVGA GeForce GTX 750 TI SC. The GPU works well when the computer is running (which is strange because the forums have several other discussions mentioning the 700 series must be incompatible with my BIOS).

  However, there are two main strange problems that have arisen since the installation of the GPU. One is that, every time that the computer enters mode "sleep", he refuses to wake back up correctly. It seems to me that the computer active but sends all the signals back panel (at the very least, no video because my monitors remain blank). On rare occasions, he wakes back correctly, but at least 90% of the time, it must be restarted. Upon reboot, the same problem sometimes (not), and the computer must be rebooted a second time until it will start again.

  This leads to the second problem. During startup, the computer goes to a black screen, listing the specifications of basic computer skills (see attached photo. In this screen, the computer does not meet any entry.  He proceeds to beep 3 times, all the same length and height spaced about 30 seconds of gap. After the third beep, the screen goes black and then the computer starts normally with no other strange behavior.

  Without the GPU, none of these problems occur. At the very least, not regularly.

  I saw another thread mentioned that, while the HP support for my office page lists not her, there is an update of the BIOS for my motherboard which has fixed issues related to the GPU more modern. By nature it is an update of the BIOS that does not (seem to) officially support Windows 7, I am reluctant to go forward with this potential solution.

  Although I intend to build myself a new computer from scratch at a certain point, I was hoping to get at least another year out of this machine, if not 2.  While this question does not seem to be immediately threatening the stability of the computer, I can't help but think that it is a question should I go quickly to avoid future problems (not to mention it would save me a good amount of electricity to be able to enter the mode 'sleep' on a regular basis).

  Any suggestions would be greatly appreciated!

  

  Problem has been solved!

  For those of you who have trouble sleeping with the p7-1240 or computers with a card mother identical (MSI Jasmine Ms 7778 ver 1.0), I suggest that you follow this thread:

  http://h30434.www3.HP.com/T5/desktop-hardware/unable-to-boot-with-new-graphics-card/TD-p/3930544/highlight/true

  It is to use an update for your BIOS that is intended only for PC under Windows 8, but that seems to work perfectly well with Windows 7 PC. It solved my problems of sleep and makes the computer to behave at least semi normally while restarting.

  However, as indicated in the wire, an update of the BIOS should be a last resort because it can turn your machine into a very heavy and expensive paperweight if something does not work. Do not forget that you have the worm 1.0 card mother MSI Ms 7778 Jasmine and remember that you update the BIOS version 8.18.

  As I am looking for 2aeo on HP.com currently (according to the thread leading up to), I'm not find the same links I found last week when I went through the update. However, you can find elsewhere.

• Strange behavior of TM2 recharge battery - only charges when almost dead

  Hi people,

  I have a new 2200 TM2T who exhibits some strange behavior of battery charge.  When plugged in, the battery will say "connected, charge", but the battery does not charge at all, no matter how much time he has left in (reported remaining level remains the same).  However, if I leave the battery discharged completely, it will start loading again, all the way up to 100%.

  It's a kind of weird automatic battery calibration or something?  I am hoping there is a way to solve this problem, because it's really annoying to not be able to keep busy all the time.

  Hi people,

  I just wanted to report on the resolution of my battery problem.  Returned the laptop to HP, and technical support has replaced the motherboard.  Works fine now.

• Strange behavior with postGlobalEvent and eventOccurred()...

  Hello world

  I have a browser plugin for my application that will do two things:

  Firstly, when the BlackBerry browser is forwarded to a Web page with a particular MIME type, the browser plugin will say my application to go to the foreground. It works without any problem.

  Secondly, the browser plugin will display a global event at my request. My request, making use of eventOccurred(), will look for this event and the EC type-approval, it will execute an authorize() method that I have. This also works. However, I notice some strange behavior:

  The first time my application launches the BlackBerry browser and goes to the page specified (with a custom MIME type), everything works fine. If I had while my application to launch the browser and do it AGAIN, my authorize() method is running TWICE. If I open the browser of my application for the third time, so my authorize() method is started THREE times. See the model?

  .. .This is all this without leaving my application. If I had to leave and then start my application again, the 'sequence' prior would begin again. Thus, it seems that whenever x times that I repeat this process, the eventOccurred() method will receive x events.

  Here are a few snippets:

  public class Events {
      final public static int EVENT_AUTHORIZE = 1;
      final public static int EVENT_OTHER = 2;
  }
  

  manager.postGlobalEvent(pid, 0xCAFEBABE, 1, 0, null, null);
  

  public void eventOccurred(long guid, int event_type, int arg2, Object arg3,
              Object arg4) {
          if (guid == 0xCAFEBABE) {
              switch (event_type) {
              case Events.EVENT_AUTHORIZE:
                  authorize();
                  System.out.println("EVENT EXECUTION");
                  break;
              case Events.EVENT_OTHER:
                  break;
              }
          }
  
      }
  

  Can we see what is happening here? I've been "racking my brain" on this one for a while now...

  Thank you!

  "Thus, this can work any time the class is instantiated." The class is instantiated just before I open my browser".

  Application.getApplication().addGlobalEventListener(this);
  

  If you call the above (by instantiating your class) every time that you open the browser, applications to register this event listener again and again.

  If you're going to do it this way, make sure removeGlobalListener you when your application is done processing.

  "Can I make addGlobalListener when my application starts even if this class does not implement GlobalEventListener?"

  You can always have your UiApplication implement GlobalEventListener or just instantiate a new object that implements it in the constructor of your UiApplication.

• Loss of data of strange behavior.

  Hi all

  I am facing a strange behavior, I have a table and a form of the VO even pointing the same iterator in the binding.i to change in shape and support bean that I try to get the new values by using the code below:

  DCIteratorBinding iterIntegration = (DCIteratorBinding) UtilityBean.getBindings () .get ("Integration1Iterator");

  Line = iterIntegration.getCurrentRow ();

  getAttributes

  but I get the old values. even if I try to commit before using:

  OperationBinding operationBinding is getBindings () .getOperationBinding ("Commit");.

  operationBinding.execute ();

  the form is loaded with the old values of the table.

  Thank you

  In test form to define the components (inputText, selectOneChoice..), autoSubmit = 'true '.

• Strange behavior of the browser blocks SQLDEV DM

  Hello

  I feel some strange behaviors in the browser of Datamodeler.

  After the opening of my model

  I have doubleclick in the window of the browser to fetch a few properties of the index:

  Drawings and models > MyModel > relational models > my RelModel > models > Oracle Database 10g > Tables

  So far, everything that happens.

  -I can select the tables and

  -doubleclicking shows the properties of the table.

  -I can scroll vertically

  -Select other tables

  -open and close the subtree of this physical tables

  Now, as soon as I click on any 'more' in the physical tables (for example, the index node or node of the plate) the browser "tri-de gel".

  The tree is distorted, scrolling seems erratic and it is impossible to select. Most of the time the main menu is also distorted.

  If I make the browser window, most of the time I'm able to hit the "file > save" from the menu. The model seems to be registered properly.

  No damage seems to have been done to the template on the reopening

  I'm on Windows 8 pro with the 64-bit version of datamodeler version 4.1.2.895 (from datamodeler - x 64 - 4.1.2 - 895.zip)

  Any ideas anyone?

  any response greatly appreciated.

  concerning

  Wouter

  Hi Wouter,

  I'm sorry, this is a bug and we are preparing a new version with this bug fixed.

  If I make the browser window, most of the time I'm able to hit the "file > save.

  Close the Data Modeler (X - close button in the upper right corner) and it will ask to save the drawing it is changed.

  Philippe

• Strange behavior Skillbuilders great lov in 5 APEX

  I've updated our 5 APEX test system.

  Installed the new APEX skillbuilders lov 5 great plugin.

  When I access a searchstring in the super-lov domain and press the searchicon, modal page with the result set is in place as it should.

  When I access a searchstring in the super-lov domain and press ENTER, the modal page displays for a short time, then disappears?

  Why does this happen?

  When I try the DEMO page at https://apex.oracle.com/pls/apex/f?p=102231:110, this strange behavior does not occur.

  Someone at - it an idea how I can fix it.

  Kind regards

  Marinus Verseput

  I found a work around for this behavior.

  Change the field hidden for a text field and a $(«__ITEM_ID").hide (); in the section "Run when the page loads" of the manufacturer.

• [MAF - AMPA] Strange behavior of the MAF with REST service

  Hi MAF Experts.

  I just noticed that there is a strange behavior in my application of the MAF. The first loading of the page, amx:page does not make its contents (of REST). However if I kill the app and relaunch the app, content appears.

  Pattern:

  1. Start of the CRG App
  2. Opening of session
  3. Dashboard (the content is rendered)
  4. Go to any other aspect (lets say a list of products)
  5. Open product list (content do not get returned)
  6. Kill the MAF application
  7. Start of the CRG App
  8. Dashboard (the content is rendered)
  9. Go to the product list
  10. List of products (content gets rendered)

  I put a few breakpoints on EntityCRUDService and RestPersistenceManager.

  So far it return the list of entities and display the correct data (from watches in debug mode)

  Last thing I noticed is the red color below. She defined the EntityList with the new value of REST (This displays a correct value).

  TaskExecutor.getInstance (.execute (isDoRemoteReadInBackground ())

  , () -> {

  Auto Sync all actions pending first, pass false for inBackground because

  We want to process actions pending before the reading distance

  getDataSynchManager (.synchronize (false));

  The list of entities < E > = executeRemoteFindAll();

  If (entities! = null)

  {

  When an error occurs (for example server is not available, the method returns the value zero)

  setEntityList (entities);

  }

  });

  Any suggestion?

  All the rest service are configured with AutoQuery = true in the persistence - mapping.xml

  See you soon,.

  Hendry

  Hendry,

  Thanks your testcase, I was able to understand the problem.

  It turns out that MAF 2.1 has problems dealing with the advanced way in which AMPA running background tasks with the help of a thread in all of features.

  We have slightly modified the implementation in AMPA to use one thread per function and now the update issue is resolved. I sent you a link to new construction.

  We will publish the new generation soon on GitHub so that others can benefit in the same solution.

  Steven Davelaar,

  Oracle Mobile A-team.

• Java Fx: strange behavior when trying to write a vertical label

  I've noticed some strange behavior on the rotated texts (Label,...) in JavaFx...

  Originally, I just wanted to be able to display labels vertically in a GridPane. The first problem is that there is no simple way to indicate a label to display its content in one direction and given orientation. It would be nice to have something like the property on the side of the tabPane allowing to easily turn the text...

  In any case, I quit then myself to use the rotation function to turn my Label. It's when the strange thing began to happen... I put my label in a cell of the grid that is not large enough to display the full text if it is not turned, but the text must be able to adapt rotated once. The problem is that the text appears wrapped even when it is turned as if packaging test have been done until the text is actually shot... The problem can be seen on this screenshot http://hpics.li/e210f2f : the text to be displayed is written in the ToolTip and we can see that only the first letter of the rotated text is displayed in the grid of the cell even if there is more than enough space to display all...

  Anyone has an idea on how to solve this? Is this the intended behavior or it's just a small bug?

  Thanks in advance for your answers.

  Another workaround solution seems to be to wrap the labels into groups and spin groups. If you don't have enough space in the grid, although bad things happen.

  import javafx.application.Application;
  import javafx.scene.Group;
  import javafx.scene.Scene;
  import javafx.scene.control.Control;
  import javafx.scene.control.Label;
  import javafx.scene.layout.GridPane;
  import javafx.scene.layout.RowConstraints;
  import javafx.stage.Stage;
  
  public class RotatedLabelsInGrid extends Application {
  
    @Override
    public void start(Stage primaryStage) {
       final GridPane root = new GridPane();
       root.setHgap(5);
       root.setVgap(5);
  
       final String letters = "ABCDEF" ;
       final int numRows = 4  ;
  
       for (int col = 0; col < letters.length(); col++) {
           for (int row = 1; row <= numRows; row++) {
               Label label = new Label("Item "+letters.substring(col, col+1)+row);
               Group group = new Group();
               group.getChildren().add(label);
               group.setRotate(90);
               root.add(group, col, row-1);
           }
       }
  
       final RowConstraints rowConstraints = new RowConstraints(100, Control.USE_COMPUTED_SIZE, 200);
       for (int i=0; i		   

• Strange behavior while making the table operation DOUBLE... !

  Hello
  
  Can we do DML/DDL operation on table DOUBLE?
  
  To know the answer, I have done below the operation and found a strange behavior...
  
  -run 5 times...
  INSERT INTO DOUBLE
  VALUES ('P');
  
  commit;
  
  Select * twice;
  o/p-
  MODEL
  1 P
  2 P
  3 P
  4 P
  5 P
  
  ---------------------------------
  updated double
  MODEL of value = "K";
  commit;
  
  Select * twice;
  o/p-
  MODEL
  2 h
  2 P
  3 P
  4 P
  5 P
  
  Odd: 1 single line update... Why? I was updating all the lines.
  
  If I run new update of command like below...
  
  updated double
  set MODEL = 'K', where dummy = "P";
  commit;
  
  Select * twice;
  o/p-
  MODEL
  2 h
  1 h
  3 P
  4 P
  5 P
  
  STRANGE: Now next updated record with 'K'... like that, if I run 5 times this o/p is as below...
  
  MODEL
  2 h
  1 h
  6.
  4 K
  6: 00
  -------------------------------------
  REMOVE double; -This also has data of delting 1 by 1 row... Why?
  
  Can anyone tell me about this operation of behaivor?
  
  Please provide any information about the DML/DDl operation on DUAl
  
  Rgds,
  PC

  http://asktom.Oracle.com/pls/asktom/f?p=100:11:7955478831730544:P11_QUESTION_ID:1562813956388

  Tom says:

  Let me start by saying:-DOUBLE is owned by SYS. SYS is the owner of the data dictionary,
  so DOUBLE fits in the data dictionary. You must not modify the data dictionary
  through SQL ever - weird things can and will happen - you are just a few of
  them. We can do a lot of strange things happen in Oracle by updating the data dictionary.
  It is recommended, supported or a very good idea.

  Double is just a convienence table. You do not need to use it, you can use anything you
  Here you are. The advantage to double is the optimizer includes double is a special line, a
  column table - when it is used in queries, it uses this knowledge during the development of the
  plan.
  ...
  the optimizer includes double is a special, magical table 1 row... It's just the way it works. If all goes well
  you reset double back to 1 row after your tests, or you've just totally broken your database!
  .. .dual = magic. Dual is a table of a line but with more than 1 or less is
  dangerous. You update the data dictionary. You should expect naturally very bad
  things are happening.

• Strange behavior with the paths of the image

  All, morning

  I have a strange behavior going on with my image paths and I was wondering if someone might be able to identify what they think happens?

  On the relative paths of my model (.. / Images/example.jpg) work very well.

  However, on the pages of the child the same relative paths do not display images and so I had to remove the '... /' to get to work (ending up with Images/example.jpg).

  This is obviously not desirable that I'm going to manually tweak the child pages where the content of the combo box was copied directly from the model that works very well.

  Any ideas what might be up?

  Thanks in advance

  You have not yet entered the main directive of models, which is that only changes to the unchangeable in the model regions will be applied to the child pages.  If this were not true, then we could never put unique content on a child page!

  So - the diagram is as follows:

  1 create a template and save it.

  2. the model of a page child spawn.  The child page will be a 'identical' model copy.

  3. Add a unique content to the page of the child.  The child page is now more a copy of 'identical' of the model.

  4 change something in the part NOT MODIFIABLE from the model and save it - all child pages receive the change.

  5 change something in the EDITABLE model part and save it - no child pages do not receive the change.

  6 spawn a NEW page of the model, and it's still a copy of 'identical' AGAIN CHANGED model.

  See how it works?

• Strange behavior of POF in 3.6.1.3

  Hi all
  
  We have seen some strange behaviors of POF in 3.6.1.3 paricularly around classes with Boolean fields.
  
  Here is my test scenario:

  package org.gridman.pof;
  
  import com.rbs.odc.dashboard.server.cluster.model.Case;
  import com.tangosol.io.pof.ConfigurablePofContext;
  import com.tangosol.io.pof.PofReader;
  import com.tangosol.io.pof.PofWriter;
  import com.tangosol.io.pof.PortableObject;
  import com.tangosol.io.pof.reflect.PofValue;
  import com.tangosol.io.pof.reflect.PofValueParser;
  import com.tangosol.io.pof.reflect.SimplePofPath;
  import com.tangosol.util.Binary;
  import com.tangosol.util.ExternalizableHelper;
  
  import java.io.IOException;
  
  public class JK implements PortableObject {
  
      private String stringField;
      private boolean booleanFieldOne;
      private boolean booleanFieldTwo;
  
      public JK() {
      }
  
      public JK(boolean booleanFieldOne, boolean booleanFieldTwo, String stringField) {
          this.booleanFieldOne = booleanFieldOne;
          this.booleanFieldTwo = booleanFieldTwo;
          this.stringField = stringField;
      }
  
      @Override
      public void readExternal(PofReader pofReader) throws IOException {
          stringField = pofReader.readString(0);
          booleanFieldOne = pofReader.readBoolean(1);
          booleanFieldTwo = pofReader.readBoolean(2);
      }
  
      @Override
      public void writeExternal(PofWriter pofWriter) throws IOException {
          pofWriter.writeString(0, stringField);
          pofWriter.writeBoolean(1, booleanFieldOne);
          pofWriter.writeBoolean(2, booleanFieldTwo);
      }
  
      public static void main(String[] args) {
          ConfigurablePofContext pofContext = new ConfigurablePofContext("jk-pof-config.xml");
  
          JK value = new JK(false, true, "JK");
  
          Binary binary = ExternalizableHelper.toBinary(value, pofContext);
  
          PofValue pofValue = PofValueParser.parse(binary, pofContext);
          PofValue childOne = new SimplePofPath(0).navigate(pofValue);
          PofValue childTwo = new SimplePofPath(1).navigate(pofValue);
          PofValue childThree = new SimplePofPath(2).navigate(pofValue);
  
          System.out.println(childOne.getValue());
  
          try {
              System.out.println(childTwo.getValue());
          } catch (Exception e) {
              System.out.println("Exception: " + e.getMessage());
          }
  
          try {
              System.out.println(childThree.getValue());
          } catch (Exception e) {
              System.out.println("Exception: " + e.getMessage());
          }
  
      }
  }

  and the config.xml file - pof - jk used above...

  <pof-config>
      <user-type-list>
          <include>coherence-pof-config.xml</include>
  
          <user-type>
              <type-id>3001</type-id>
              <class-name>org.gridman.pof.JK</class-name>
          </user-type>
  
      </user-type-list>
  </pof-config>

  When you run the main method of the class above you could expect to get

  JK
  false
  true

  ... but what you get is...

  JK
  null
  Exception: -34 is an invalid type

  What is going on? The booleanFieldOne seems to have been serialized as the type-34 which is PofConstants.V_BOOLEAN_TRUE which makes sense, but the code to deserialize the field cannot handle type-34. The booleanFieldTwo returned null and is serialized as the type-65 which is PofConstants.T_UNKNOWN
  
  Where we have a problem, is if we do a query with a filter like this...

  new EqualsFilter(new PofExtractor(null, 1), true);

  .. .it will break whenever he tries to extract the POF value, where booleanFieldOne is true.
  
  I know that we can solve this problem by always specifying the type, so it does not work

  new EqualsFilter(new PofExtractor(Boolean.class, 1), true);

  and it works, too, considering that it fails without specifying the type...

  childTwo.getValue(Boolean.class);

  Although there are alternatives, it seems very strange.
  
  What's even stranger, is that if you do not serialize the stringField so writeExtrnal and readExternal methods look like this

  @Override
  public void readExternal(PofReader pofReader) throws IOException {
      //stringField = pofReader.readString(0);
      booleanFieldOne = pofReader.readBoolean(1);
      booleanFieldTwo = pofReader.readBoolean(2);
  }
  
  @Override
  public void writeExternal(PofWriter pofWriter) throws IOException {
      //pofWriter.writeString(0, stringField);
      pofWriter.writeBoolean(1, booleanFieldOne);
      pofWriter.writeBoolean(2, booleanFieldTwo);
  }

  You will get this output...

  null
  false
  Exception: -34 is an invalid type

  iNow the stringField is null (that we have not serialized it) but the booleanFieldOne now is desrialized correctly as a Boolean false. We have noticed that if you have a Boolean value as the first field you serialize in the method writeExternal methods then it is serialized as the type POF - 11 which is PofConstants.T_BOOLEAN and is deserialized as the correct value true or false value.
  
  See you soon,.
  JK

  Hi Jonathan -.

  For the purposes of tracking, JIRA COH-5231 opened for this issue.

  Mark J
  The Oracle coherence