strange error with configure snapshot controlfie

Similar Questions

• Strange error with RHCL RH10 and RH11 command-line compilation

  Hello once again, RoboHelp gurus!

  I feel a strange error using the compilation process command-line rchl in RoboHelp 10 and 11 of RoboHelp.

  Here is the command I use:

  CD "C:\Program Files (x 86) \Adobe\Adobe RoboHelp 10\RoboHTML.

  RhCl "C:\folder\project.xpj"-l "SSL_Name" o "c:\outputfolder" g "C:\log\folder\logfile.txt".

  When I generate the log of the cmd file, I see an error "LILo: BIBCientInit could not initialize" twice in the window of cmd prompt while compiling is the treatment.  The cmd prompt window looks like this:

  
  

  C:\Program Files (x 86) \Adobe\Adobe RoboHelp 10\RoboHTML > RhCl "C:\projectfolder\project.xpj"-l "SSL_Name" o "c:\outputfolder" g "C:\logfolder\logfile.txt" [press ENTER]
  

  LILo: Could not initialize BIBCientInit
  

  LILo: Could not initialize BIBCientInit

  C:\Program Files (x 86) \Adobe\Adobe RoboHelp 10\RoboHTML >

  
  

  The created FichierJournal.txt has no mention of ""LILo: BIBCientInit could not initialize "it contains."  Compiling builds without problem, as far as I can tell.

  
  

  The same thing happens when I do not create the log during the cmd file and it errors record right "compensation output folder.  But, it seems to me that the output folder does not actually get disabled.

  
  

  This allows the viewing of the compilation process line by line in the cmd prompt window.  When the compiler indicates "output Compensation folder...". ', the ' LILo: BIBCientInit failed to initialize "error message appears twice, and then the process continues.

  Here's the command:

  CD "C:\Program Files (x 86) \Adobe\Adobe RoboHelp 10\RoboHTML.

  RhCl 'C:\folder\project.xpj'-l 'SSL_Name' o 'c:\outputfolder '.

  The cmd prompt window looks like this:

  
  

  C:\Program Files (x 86) \Adobe\Adobe RoboHelp 10\RoboHTML > RhCl 'C:\projectfolder\project.xpj'-l 'SSL_Name' o 'c:\outputfolder"[press ENTER]

  Adobe (R) RoboHelp version 10.0.0.287 Project command line compiler

  Copyright (C) 2006-2007 Adobe Systems Incorporated and its licensors. All rights reserved.

  Project: C:\folder\project.xpj

  Page layout: SSL_Name.

  Output: c:\outputfolder.

  Scanning for the compilation project...

  Review completed.

  ATTENTION: No luggage description of the file.

  From compilation...

  HTMLHELP 10.0.0.287 preprocessor

  Compilation C:\folder\! chm_tmp_folder_0\project.xpj ...

  Preparation create HTMLHELP...

  Compensation output folder...

  LILo: Could not initialize BIBCientInit
  

  LILo: Could not initialize BIBCientInit

  Preparation of the HTML Help files...

  Copying files...

  ...

  It's okay if it's a HTMLHelp or WebHelp output.  Any thoughts on what is this error and what is the cause?

  I've been away from RoboHelp for about 9 months, but I'll be back on the same projects and the same version of RoboHelp 10 and the same compilation process.  The difference is that I have a new laptop.

  Thank you very much in advance for your time!

  EA

  Adobe was able to recreate this issue on their end, and a bug was created for her.

• Strange error with cRIO and scan Mode

  I'm scanning two modules cRIO on a controller of 9012 + 9112 bottom of basket 8 channels in scan mode, and I call the function 'read the Variable scanned '.

  I see this error, each a few scans:

  Error -2132869099 occurred at Property Node (arg 1) in PolymorphicModuleScan.vi:7->sampleData2.vi->ZDAQ_cRIO_Target_Main.vi
  
  Possible reason(s):
  
  LabVIEW:  (Hex 0x80DF0015) A deployment transaction is in progress.
  

  The search for this error on NI.com gives no help at all.  This is the first time I see this (I've been running this code for some time without error).  All software is since the dev of August 2011.

  Resolved: I was calling the function "Get the Period.VI of Scan" scan at 1 Hz.  This seems to have caused the 9205 (not the 9237) produce this error.

  I removed the call to the offending function and this has solved the problem,

• Error when navigating with the Snapshot Explorer.

  Hello

  I use Foglight virtualization review 6.5 release - 130501.2030 (Free Edition).

  How can I correct an error with the Snapshot Explorer?

  By clicking on this product the message: "an error has occurred on the server...". »

  Thank you

  You will get this error if you have not all VMs with snapshots

• InDesign CC | Error with file indd - "unable to open the file...". Adobe InDesign does not support the file format.

  I encountered a very strange error with InDesign CC after you save a file created in CS4. I would like to attach the file but I don't know how to do this, if I can. The file is 44 KB and doesn't seem like it should be (file I saved was a great book cover). Now, as the original CS4 file has been replaced using InDesign CC, the file is corrupted and I get the error message shown below. The file is not open in another application. If somebody has got this before?

  

  Replace the .idml extension and see if it opens...

• Error when I configure snapshot controlfile RMAN

  Dear Experts,

  I have Oracle 11 g R2 DB primary and Standby in two Machines

  I have Window Server 2008

  I am new to RMAN tools

  I do set up RMAN primary side

  I made the OS address for a disk primary side

  Now I'm RMAN configuration as below:

  Configure default device the disk type;

  set up the device type disk parallelism 4 type of backup backupset.

  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK to 'Z:\RmanControlFileBackup\cf%F ';

  Configure controlfile autobackup on;

  Configure controlfile autobackup peripheral type disc format to "+ FRA;

  Configure controlfile autobackup format for device type sbt to "backup_ % d_controlfile_ %f."

  Configure redundancy 4 retention strategy;

  Configure the None archivelog deletion policy;

  Configure snapshot controlfile name to 'Z:\RMANCONTROLFILEBACKUP\SNAPSHOT_EPPROD1_CF. CTL';

  Next, I get the following error... I don't know how I can delete that I did my research online, I found this link

  http://pavelermakov.WordPress.com/2011/11/08/ora-01580-error-creating-control-backup-file/

  RUN SYS. DBMS_BACKUP_RESTORE. CFILESETSNAPSHOTNAME('/U01/app/Oracle/product/11.2/DB/DBS/snapcf_db1. F') ;

  I could not implemented on my setup because I do not have snapcf_db1.f file... Please any help will be appreciated.

  anyone with any solution.

  I need to erase the last transactional... .configure the controlfile Snap to 'Z:\RMANCONTROLFILEBACKUP\SNAPSHOT_EPPROD1_CF. CTL' name; who make that mistake.

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of the command configure at 19/12/2013 08:44:57

  RMAN-03014: implicit recovery catalog Resync failed

  RMAN-03009: resync command failed complete default channel at 19/12/2013 08:44:57

  ORA-01580: Z:\RMANCONTROLFILEBACKUP\SNAPSHOT_EPPROD1_CF. CTL control backup file creation error

  ORA-27040: create file error, cannot create the file

  04002 - OSD: could not open the file

  S/O-error: (OS 3) the system cannot find the path specified.

  Hello

  > RMAN-03002: failure of the command configure at 19/12/2013 08:44:57

  > Implicit 03014 RMAN recovery catalog Resync failed:

  > RMAN-03009: resync command failed complete default channel at 19/12/2013 08:44:57

  "DO NOT CONNECT TO THE CATALOG.

  Thank you

• Workload with strange errors

  Hi, we used the utility of loading of contour for sometimes, but in the last days, contour workload had strange errors, but metadata seems can be load in the planning.

  And what follows did not seem like an error rather than a warning. But he reached in the error files and send alert e-mail. And I want to remove these files err. Ideas for her?

  Err:

  D:\BatchJob\err\ExportBudgetApp_Att_Homebase.csv.exc?: [Mon 06 Oct 11:13:14 HKT 2014] Member from input command (switch/o) option file will not be performed: this option is only available for (no /er) import operations.

  D:\BatchJob\err\ExportBudgetApp_Att_SourcingCountry.csv.exc?: [Mon Oct 06 15:12:45 HKT 2014] Member from input command (switch/o) option file will not be performed: this option is only available for (no /er) import operations.

  D:\BatchJob\err\ExportBudgetApp_CentreTypeCounter.csv.exc?: [Fri Nov 07 06:48:44 HKT 2014] Member from input command (switch/o) option file will not be performed: this option is only available for (no /er) import operations.

  D:\BatchJob\err\ExportBudgetApp_Currency.csv.exc?: [Fri Nov 07 06:50:07 HKT 2014] Member from input command (switch/o) option file will not be performed: this option is only available for (no /er) import operations.

  D:\BatchJob\err\ExportBudgetApp_CurrencyCounter.csv.exc?: [Fri Nov 07 06:48:34 HKT 2014] Member from input command (switch/o) option file will not be performed: this option is only available for (no /er) import operations.

  D:\BatchJob\err\ExportBudgetApp_Customer.csv.exc?: [Fri Nov 07 06:49:45 HKT 2014] Member from input command (switch/o) option file will not be performed: this option is only available for (no /er) import operations.

  D:\BatchJob\err\ExportBudgetApp_FiscalYear.csv.exc?: [Sea 05 Nov 08:59:02 HKT 2014] Member from input command (switch/o) option file will not be performed: this option is only available for (no /er) import operations.

  D:\BatchJob\err\ExportBudgetApp_GDim1.csv.exc?: [Fri Nov 07 06:49:11 HKT 2014] Member from input command (switch/o) option file will not be performed: this option is only available for (no /er) import operations.

  D:\BatchJob\err\ExportBudgetApp_GDim2.csv.exc?: [Fri Nov 07 06:49:25 HKT 2014] Member from input command (switch/o) option file will not be performed: this option is only available for (no /er) import operations.

  D:\BatchJob\err\ExportBudgetApp_InputEntityCounter.csv.exc?: [Fri Nov 07 06:49:02 HKT 2014] Member from input command (switch/o) option file will not be performed: this option is only available for (no /er) import operations.

  D:\BatchJob\err\ExportBudgetApp_PPCurrencyCheck.csv.exc?: [Fri Nov 07 06:48:15 HKT 2014] Member from input command (switch/o) option file will not be performed: this option is only available for (no /er) import operations.

  D:\BatchJob\err\ExportBudgetApp_ReportGrouping.csv.exc?: [Fri Nov 07 06:48:53 HKT 2014] Member from input command (switch/o) option file will not be performed: this option is only available for (no /er) import operations.

  D:\BatchJob\err\ExportBudgetApp_SourcingCountry.csv.exc?: [Fri Nov 07 06:48:25 HKT 2014] Member from input command (switch/o) option file will not be performed: this option is only available for (no /er) import operations.

  D:\BatchJob\err\ExportBudgetApp_Src-PDN.csv.exc?: [Fri Nov 07 06:49:35 HKT 2014] Member from input command (switch/o) option file will not be performed: this option is only available for (no /er) import operations.

  D:\BatchJob\err\ExportBudgetApp_Version.csv.exc?: [Fri Nov 07 06:49:57 HKT 2014] Member from input command (switch/o) option file will not be performed: this option is only available for (no /er) import operations.

  D:\BatchJob\err\ImportBudgetApp_Period08.csv.exc?: [Mon Sep 01 09:37:39 HKT 2014] Member from input command (switch/o) option file will not be performed: this option is not available for the dimension 'period '.

  D:\BatchJob\err\ImportBudgetApp_Period09.csv.exc?: [Tue Sep 30 10:47 HKT 2014] Member from input command (switch/o) option file will not be performed: this option is not available for the dimension 'period '.

  D:\BatchJob\err\ImportBudgetApp_Period10.csv.exc?: [Fri 31 Oct 11:57:42 HKT 2014] Member from input command (switch/o) option file will not be performed: this option is not available for the dimension 'period '.

  D:\BatchJob\err\ImportBudgetApp_RollingForecast08.csv.exc?:

  D:\BatchJob\err\ImportBudgetApp_RollingForecast09.csv.exc?:

  D:\BatchJob\err\ImportBudgetApp_RollingForecast10.csv.exc?:

  D:\BatchJob\err\ImportBudgetApp_Std_Entity.csv.exc?:

  D:\BatchJob\err\ImportBudgetApp_Std_GDim1.csv.exc?:

  D:\BatchJob\err\ImportNYBudgetApp_CentreTypeCounter.csv.exc?:

  D:\BatchJob\err\ImportNYBudgetApp_Currency.csv.exc?:

  D:\BatchJob\err\ImportNYBudgetApp_CurrencyCounter.csv.exc?:

  D:\BatchJob\err\ImportNYBudgetApp_Customer.csv.exc?:

  D:\BatchJob\err\ImportNYBudgetApp_FiscalYear.csv.exc?: [Sea Nov 05 09:04:33 HKT 2014] Member from input command (switch/o) option file will not be performed: this option is not available for the dimension "attributes FiscalYear.

  D:\BatchJob\err\ImportNYBudgetApp_GDim1.csv.exc?:

  D:\BatchJob\err\ImportNYBudgetApp_GDim2.csv.exc?:

  D:\BatchJob\err\ImportNYBudgetApp_InputEntityCounter.csv.exc?:

  D:\BatchJob\err\ImportNYBudgetApp_PPCurrencyCheck.csv.exc?:

  Parts of the log file:

  [Fri Nov 07 06:48:25 HKT 2014] Member from input command (switch/o) option file will not be performed: this option is only available for (no /er) import operations.

  [Fri Nov 07 06:48:25 HKT 2014] Export successfully open file '. '. ' / Dimensions/BudgetApp_SourcingCountry.csv.

  [Fri Nov 07 06:48:25 HKT 2014] Prefixed UTF-8 BOM successfully of the output file or stream.

  [Fri Nov 07 06:48:26 HKT 2014] A refresh of the cube operation will not be run.

  [Fri Nov 07 06:48:26 HKT 2014] Create filters for safe operation will not be performed.

  [Fri Nov 07 06:48:26 HKT 2014] Planning of the process of loading over edge (without such load specified data (/ N)). 378 export records have been written.

  No argument comes from a properties file.

  Command line arguments: /D:CurrencyCounter /E:./Dimensions/BudgetApp_CurrencyCounter.csv /X:./logs/ExportBudgetApp_CurrencyCounter.csv.exc A:Budget /L:./logs/ExportBudgetApp_CurrencyCounter.csv.log/m /U:admin 8

  Subject (merged) command line:

  /D:CurrencyCounter /E:./Dimensions/BudgetApp_CurrencyCounter.csv /X:./logs/ExportBudgetApp_CurrencyCounter.csv.exc A:Budget /L:./logs/ExportBudgetApp_CurrencyCounter.csv.log/m /U:admin 8

  [Fri Nov 07 06:48:27 HKT 2014] Command-line submitted: /D:CurrencyCounter /E:./Dimensions/BudgetApp_CurrencyCounter.csv /X:./logs/ExportBudgetApp_CurrencyCounter.csv.exc A:Budget /L:./logs/ExportBudgetApp_CurrencyCounter.csv.log/m /U:admin 8

  [Fri Nov 07 06:48:34 HKT 2014] Successfully connected in the application 'Budget', version 11.123500, adapter Interface Version 5, supported and not enabled workforce, CapEx no taken care and not active, CSS Version 3

  No argument comes from a properties file.

  Command line arguments: /D:CurrencyCounter /E:./Dimensions/BudgetApp_CurrencyCounter.csv /X:./logs/ExportBudgetApp_CurrencyCounter.csv.exc A:Budget /L:./logs/ExportBudgetApp_CurrencyCounter.csv.log/m /U:admin 8

  Subject (merged) command line:

  /D:CurrencyCounter /E:./Dimensions/BudgetApp_CurrencyCounter.csv /X:./logs/ExportBudgetApp_CurrencyCounter.csv.exc A:Budget /L:./logs/ExportBudgetApp_CurrencyCounter.csv.log/m /U:admin 8

  Thanks for the help!

  Given that you're trying to export it says just will not run you who command members / o is default and it's just information, not a mistake. You can try to add/o When you try loading data or export to get rid of this one.

  I know what are the other. My best guess will be because he will D: he could think of that as a /D switch or it may be because you give. extenstion csv.exc. You can try this with

  1. write in the same folder, not to do so. / logs

  2. Remove. CSV.exc and just add .log extension

  Concerning

  Celvin Kattookaran

• Strange error messages just before the accidents of the body

  Latest updates to 2015 of the body
  10 64-bit Windows
  6-core I7 3.2
  980gtx 4 GB
  32 GB of ddr3 memory
  
  Recently I've been doing strange errors that cause the body to crash a lot. I have no idea what may cause the problem and I don't seem to have other programs just to the top and crash on me like body. I tried to update the drivers completely but that seemed only to make things worse but that might have been just a coincidence.
  
  When searching for error "Cannot allocate temporary data to reverse" nothing of use appears in google. Is there a database of adobe error message I should be through?
  

  The project I'm trying is large enough and had a few former premiere pro imported projects that could cause hiccups?

  Attached below are some of the error messages that popped up. Everything worked fine until the "low level" Adobe Player cause body crashing. After having reopened organization the following errors appeared "impossible to affect", "AE. MASK', 'contact of entry', and 'PPixHandle '.

  See you soon,.
  James

  

  

  Thanks for a detailed response.

  First of all, I suggest you create a new (empty) project and import your existing of the project leader (.prproj) using the media browser.

  As you work with a large number of data, how are your configuration of disks?

  This project is to use as much ram as I can give it. It is a hunger project. This could help boost errors. My system has 32 GB of ram, I allocated 6 GB for other programs / windows to use. I used to have only 4 GB allocated for windows but that was causing errors of memory that windows needed more runs while this project was open

  I would say that allocate more memory (8-10 concerts IMO) windows to avoid bottlenecks because other processes are equally important.

  Is usually a specific cause for the error messages I posted in the original post to protest or they are generic error messages?

  These errors are mostly generic.

  Thank you

  Regalo

• vCAC6 IaaS installation fails with configuration wizard - cannot run SQL Create User command

  Kia Ora.

  Put together the first poc vCAC6. The devices are in place and works fine, now up to IaaS Win2k8r2 with local SQL Express and this install fails. Pre-Reqs work. Installed and patched .NET 4.5 (not 4.5.1) as well.

  I installed as a local administrator on the server arrived at the field of IaaS. Installation running. EXE using run as administrator.

  The installation creates the database in SQL Express premises. I slowly raised privileges to solve the problems, but the same lines are written to the LOG file and there is an installation failed.

  News: 2014-01-15 09 49 58 588 h: construction project is "C:\Program Files (x86)\VMware\vCAC\Server\Database\DeployVMPS.xml" (BuildDB Target.

  News: 2014-01-15 09 49 58 604 h: build succeeded.

  News: 2014-01-15 09 49 58 604 hours: 0 warning (s)

  News: 2014-01-15 09 49 58 604 h: error (s) 0

  News: 2014-01-15 09 49 58 620 hours: time 00:03:35.12

  News: 2014-01-15 09 49 58 667 hours: CREATE USER [serverName\Administrator] to [NVCACIAAS\Administrator] CONNECT

  News: 2014-01-15 09 49 58 682 hours: EXEC sp_addrolemember 'db_owner', 'serverName\Administrator. "

  Error: 2014-01-15 09 49 58 854 h: error: vCAC Configuration Wizard is unable to run the Sql CREATE USER [serverName\admin] FOR LOGIN [serverName\Administrator] command.

  Error: 2014-01-15 09 49 58 854 h: error: vCAC Configuration Wizard is unable to run the Sql CREATE USER [serverName\Administrator] FOR LOGIN [serverName\Administrator] command.

  Is not not a SQL guru, I tried to elevation of privileges and exchanged between using SQL and Microsoft connection. tried to hook up with a new SQL and AD security with rights to MSDB db_owner account. Also as a 'Microsoft authenticated. " each re - run provides the same statements without worrying if the localMachine\Administrator account exists or not.

  Any help much appreciated.

  Thank you and happy new 2014!

  Hi there.

  I added the administrator account of the local computer in the security of SQL Express to the sysadmin role and installation is complete. ?!? Although I tried to use the SA account to install and the same messages of error and success in this file as well newspapers runs.

  Now these lines look like this;

  News: 2014-01-15 10 21 50 978 hours: Service NVCACIAAS\Administrator account is the same account that creates the database.  Task of grant of role of ignored by the database owner.

  News: 2014-01-15 10 21 50 994 hours: Service NVCACIAAS\Administrator account is the same account that creates the database.  Task of grant of role of ignored by the database owner.

  If it is installed, but I don't know why I need to raise the local Sysadmin role administrator account so he could complete or why to create the user account wrong localMachine\Administrator in installation because there was.

  I've rolled back to a previous snapshot and was able to repeat the failure until I added this user account to the Sysadmin role.

  Her go configuration and usage vCAC now. I'll repeat the installation at a later stage.

  see you soon

• Transactions with IsolationLevel snapshot cannot be promoted. (VCAC5.2 + VCD5.1)

  Hi all

  I am using VCAC + VCD to deploy VAPP.

  I created VAPP and component VAPP. but when I submit my request that I got this error:

  • Error the applicant unit. Transactions with IsolationLevel snapshot cannot be promoted.

  someone you encounter this before?

  very appreciated for your reply, thank you

  I heard that maybe it's a bug in the installer to point 5.2.  There is a configuration where the deposit app.config file can use a connection string to the database while an individual model uses a different.  It is required by SQL Snapshot isolation not use DTC and thus multiple connections with different channels causes this error.

  It is a requirement that the templates that are installed matches the repository web application configuration in the web.config file.  This should be validated at run time, but it seems that our Installer does not validate this...  I suspect that this happens when the web model manager is installed with sql different information identification and then the Manager of model data.

  Check the Repository.Website\web.config on the Model vCAC Manager server/s to the path \Program files 9 x 86) \VMware\vCAC\Server\Model Manager Web\ for the parameter below...

  Make sure the server, database and the authentication setting that corresponds in the table below (case is important here too)...

  SELECT *.

  FROM [DynamicOps.RepositoryModel]. [Models]

  Data Source = localhost; Initial Catalog = vCAC; Integrated Security = True; MultipleActiveResultSets = True

  If they do not match, probably easier to manually change both to use iis authentication and restart windows, and check if the problem persists.  If this resolves the issue and you want a different configuration, laugh with the settings further and confirm the fact that it always works.

• strange errors TNS-12504

  Hi all
  
  I had TNS-12504 strange errors when I try to connect to a 10.2.0.5.0db on my laptop (Vista 32 bit MS).
  
  I installed Oracle DB 10.2.0.5.0 in c:\oracle\product\10.2.0\db_1 and its Oracle customer 10.2.0.5.0 to C:\oracle\product\10.2.0\client_1.
  
  I configured a MS Loopback card with static ip 10.10.1.1.
  I set the variable ORACLE_HOSTNAME = PC322LB system, and my host file contains PC322LB 10.10.1.1.
  
  My network configuration files contain:
  
  ###########################################
  
  C:\oracle\product\10.2.0\db_1\network\admin\listener.ora:
  
  LISTENER_ORA10 =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.10.1.1)(PORT = 1522))
  )
  )
  
  
  SID_LIST_LISTENER_ORA10 =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = ORA10)
  (ORACLE_HOME=C:\oracle\product\10.2.0\db_1)
  )
  )
  
  
  
  ###########################################
  
  C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora:
  
  
  LISTENER_ORA10 =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.10.1.1)(PORT = 1522))
  )
  )
  
  ORA10 =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.10.1.1)(PORT = 1522))
  )
  (CONNECT_DATA = (SID = ORA10))
  )
  
  
  ###########################################
  
  C:\oracle\product\10.2.0\client_1\network\admin\tnsnames.ora:
  
  ORA10 =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS =
  (PROTOCOL = TCP)
  (HOST = 10.10.1.1)
  (PORT = 1522)
  )
  )
  (CONNECT_DATA =
  (SID = ORA10)
  )
  )
  
  #########################################
  
  And I set the parameter LOCAL_LISTENER = "LISTENER_ORA10."
  
  
  However, if I try to connect to sqlplus by the window / I still get the error
  ORA-12504: TNS:listener did not have the SID in CONNECT_DATA
  
  :
  
  C:\oracle\product\10.2.0\db_1\bin >. \lsnrctl status listener_ora10
  
  LSNRCTL for 32-bit Windows: Version 10.2.0.5.0 - Production on May 27, 2011 15:54:24
  
  Copyright (c) 1991, 2010, Oracle. All rights reserved.
  
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP (PORT = 1522))(HOST=10.10.1.1)))
  STATUS of the LISTENER
  ------------------------
  Alias listener_ora10
  Version TNSLSNR for 32-bit Windows: Version 10.2.0.5.0 - Production
  Start date may 27, 2011 15:38:28
  Uptime 0 days 0 h 15 min 57 sec
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Listener parameter File C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
  Listener log file C:\oracle\product\10.2.0\db_1\network\log\listener_ora10.log
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp (PORT = 1522))(HOST=10.10.1.1)))
  Summary of services...
  Service "ORA10" has 2 occurrences.
  Instance "ORA10', status UNKNOWN, has 1 operation for this service...
  Instance "ora10" READY State, has 1 operation for this service...
  Service 'ORA10XDB' has 1 instance (s).
  Instance "ora10" READY State, has 1 operation for this service...
  Service 'ORA10_XPT' has 1 instance (s).
  Instance "ora10" READY State, has 1 operation for this service...
  The command completed successfully
  
  C:\oracle\product\10.2.0\db_1\bin >. \tnsping ora10
  
  AMT Ping Utility for 32-bit Windows: Version 10.2.0.5.0 - Production on May 27, 2011 15:54:29
  
  Copyright (c) 1997, 2010, Oracle. All rights reserved.
  
  Use settings files:
  C:\oracle\product\10.2.0\db_1\network\admin\sqlnet.ora
  
  
  TNSNAMES adapter used to resolve the alias
  Try to contact (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = 10.10.1.1)(PORT = 1522))) ())
  ONNECT_DATA = (SID = ORA10)))
  OK (0 msec)
  
  C:\oracle\product\10.2.0\db_1\bin >
  C:\oracle\product\10.2.0\db_1\bin >.\sqlplus.exe system/foo@ORA10
  
  SQL * more: version 10.2.0.5.0 - Production on Fri 27 mai 15:54: 40 2011
  
  Copyright (c) 1982, 2010, Oracle. All rights reserved.
  
  ERROR:
  ORA-12504: TNS:listener did not have the SID in CONNECT_DATA
  
  
  Enter the user name:
  
  
  
  In my view, that really miss me stupid put... any help?
  
  Thank you
  
  Andrea

  ORA10 =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.10.1.1)(PORT = 1522))
  )
  (CONNECT_DATA = (SID = ORA10))
  )

  Your TNS entry seems incorrect, try this way

  ORA10 =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.1.1)(PORT = 1522))
      (CONNECT_DATA=(SID=ORA10))
    )
  

• Error with the listener. ORA-00132: error of syntax or network name not resolved

  Hi all
  
  I get a strange error while trying to start the db.
  
  SQL > startup nomount
  ORA-01078: failure in the treatment of system settings
  ORA-00119: invalid specification for the system LOCAL_LISTENER parameter
  ORA-00132: error syntax or network name not resolved "LISTENER_TSS2A076N3."
  
  Listener is running.
  
  Here is my file Listener.
  
  listener.ora.tss2a119n1 # Network Configuration file: / oradb/oracle/product/asm /.
  11.1.0/network/admin/listener.ora.tss2a119n1
  # Generated by Oracle configuration tools.
  
  LISTENER_TSS2A076N3 =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = xxxx.xx.xx.xxxx.net)(PORT =)
  (4329)(IP = FIRST))
  (ADDRESS = (PROTOCOL = TCP) (HOST = xxxx.xxx.xx.xxxx.net)(PORT =)
  (4329)(IP = FIRST))
  )
  )
  
  SID_LIST_LISTENER_TSS2A076N3 =
  (SID_LIST =
  (SID_DESC =
  (GLOBAL_DBNAME = pnet01r_dgmgrl)
  (SID_NAME = pnet01r3)
  (ORACLE_HOME = oradb/oracle/product/db_1/11.1.0)
  )
  (SID_DESC =
  (SID_NAME = + ASM3)
  (ORACLE_HOME = oradb/oracle/product/asm/11.1.0)
  )
  )
  
  
  Well, I'm trying to install data guard and this error I get on the standby server. The listener preceding is also the same.
  
  Help, please.
  concerning

  I'm not very clear on that... Kindly explain... what exactly needs to add, delete or modify.

  Follow the link, it shows why and how LOCAL_LISTENER needs a specifications in the tnsnames.ora. You don't have a problem with the native listener.

  Werner

• Equium P300-16 t - system error writing Configuration data

  Salvation message for the first time

  I have a Toshiba Equium P300-16 t and it has developed an error starting on the screen, it says

  System error writing Configuration data
  F1 - F2 CV - Bios settings

  When it appears that I can't get the option of recovery for work the bios settings seem to be completely in-accessible.

  This error appears just under the version number of the bios and the specifications of the RAM, just after the toshiba screen. The laptop is also a beep which I think is its length bios error code just two beeps very loud and even with a very short break inbetween

  On the page that appears after F1 (curriculum vitae) is pressed it shows just an another two options that are
  F2 - Setup F12 Multiboot Menu selection

  None of these options no matter what and the system is just idle on this screen.

  Obviously, without the bios menu there is not much I can do

  Really research help solve this problem as im not very clued up on the configurations of the system

  Oh and incase it allows... BIOS version - PhoenixBIOS 4.0 release 6.1

  Thanks in advance
  Kris

  Hi mate

  It would be interesting to know if the HARD drive is listed in the BIOS.
  Could you if you please check this?
  In the BIOS, you should see the HARD drive and HARD drive details
  If it is not visible, then that would mean that the HARD drive is faulty and therefore the operating system cannot be started.

  In this case, the HARD disk needs to be changed.

• strange behavior with access Internet and e-mail through D6300 AC1600

  NOTE: When creating this post 'Model' box doesn't let me choose my modem model, it was not an option so I picked one at random! My current modem is the AC1600.

  I hope someone can help with this problem.

  Modem works fine, Internet access is very good.

  My my email on new servers migrated hosting service yesterday now I have strange problems with access to electronic mail.

  I can access e-mail very well on my phone via 4G.

  Unable to access from any device on my network, e-mail, webmail or outlook or messaging.

  If my phone is on the network, it cannot access email either.

  I can ping the e-mail servers and my domain OK from any device

  DNS resolves the addresses OK

  As several devices on the network have difficulty then it is network and/or router associated

  I think a factory reset on the modem as a last resort.

  It's only a problem for e-mail server migration.

  Outlook is saying: the connection to the server has been lost

  Outlook cannot configure the IMAP account automatically.

  When I try manually it says that the server does not support the encryption type (the one provided by the service of the host).

  My companion said that it works OK on hisnetwork.

  Ahhhh, would you believe? After a factory reset of the router and troublehshooting hours I managed to contact my hosting service (I usually go through the dealer) and they said that my IP address has been blocked due to many failed attempts to connect to my CPanel! I had encountered a problem with the password CPanel and who had put on the side so I fixed the problem of e-mail! Heck, who would have guessed that they were related?

  Thanks for your help!

• strange problem with Ericsson H5321

  Hello

  I have a strange problem with Ericsson H5321 on my X 230. Until a few weeks ago, the card worked perfectly as a modem (at least on Linux, so I guess it would be too much work in Windows). Unfortunately, a few weeks ago disappeared from the network manager modem connection. I checked that all the special device for this files still exist:

  $ because I in/sys/class / * / * {ACM, wdm} * / device/interface; echo-n "${i}: ';" $ Cat {i}; fact
  
  / sys/Class/TTY/ttyACM0/Device/Interface: H5321 gw Broadband Mobile Modem
  
  / sys/Class/TTY/ttyACM1/Device/Interface: H5321 gw Mobile broadband data Modem
  
  / sys/Class/TTY/ttyACM2/Device/Interface: H5321 gw Mobile Broadband GPS Port
  
  / sys/Class/usbmisc/CDC-wdm1/Device/Interface: H5321 gw management of mobile devices to wide band
  
  / sys/Class/usbmisc/CDC-wdm2/Device/Interface: H5321 gw Mobile Broadband USIM Port
  $ lsusb | grep Ericsson
  
  

  .. .and I also checked it works like GPS (at least kind of: it generates data on/dev/ttyACM2 NMEA streams, but cannot get a GPS fix even after 45 minutes with access to an open sky).

  Then I tried to run windows 7 and the card is visible in the "Device Manager", but there is also no possibility to create the GSM connection in the connection menu in the bottom right.

  I tried a new install of Windows 7, I tried to reset the BIOS (even with the removal of the battery backup), but still I can't force them to work again. My BIOS is fully upgraded BTW: the problem appeared during the use of 2.61 and I also tried with recently published 2.62.

  My cell phone is always on the extended warranty, but as modem bought in line with the basic configuration it was only covered by the warranty of 12 months has expired

  Today it came to my mind that, as the modem itself seems a little work (present, responsive GPS device) then maybe it's a SIM card reader that is actually damaged (which would explain a bit why the camera itself is present, but I can't create a connection). Can someone confirm or deny my theory? If it is valid, then I could still replace SIM card reader because it is part of the basic configuration.

  Thanks a lot for your suggestions!

  [Mystery solved: I managed to put the SIM card on a wrong side...;]
  [I hate myself so muuuuch;]
  ([btw: Lenovo could fix their SIM card reader, so there is only one possible way to put a SIM card using his corner of heart: it would have saved me 2 days of stress and an investigation;]) )