Strange question sound P30

Similar Questions

• Strange question, craps remaining after the system recovery on my windows xp desktop.

  Strange question, thank you for your comments!

  I just reinstalled windows xp on my old HP desktop HP Pavilion Media Center TV m7334n PC computer using the recovery on D partition. I expect that the installation would be a clean install. At the beginning of the recovery, I noticed the message on the screen saying that the backup was in process. After recovery, I could start my computer and realized that used disk space C was still as the space of C drive used before the restoration. I also noticed that there was a lot of pre-installed programs appears on the list of start - all programs. I never installed them after recovery. Many of them work. I expect a CLEAN installation. It is not clean at all.

  Furthur inspection on the system to reveal problems:

  1. I noticed that there are so many records under the program folder program files on the C drive (I have only one program fichiersDossier). I guess that the recovery process copied evething under my original forder of program files in this folder. I don't have anything I can use most of them because the links were scattered on a large number of them (I can't run the program of either start - all programs or folder directly). Is not at all a CLEAN installation.

  2. the recovery process also copy my document in the folder as well original user, see below to understand which is the original file of the user.

  3. originally, in my computer, I have two users (or 3 including comments), we came to HP-administrator with the computer, is another family.  On the computer I just recover, there are 3 users accompanying the recovery. They are administrator, hp-administrator and guest. I've renamed the family administrator. Now, under systems and settings, I see the user plus two records. They are administrator-YOUR-4DACD0EA75 and hp-administrator-YOUR-4DACD0EA75. YOUR 4DACD0EA75 sounds familiar. I can remember that I was lazy and that it has not changed the computer name during installation after recovery. YOUR 4DACD0EA75 is actually the default name given to me during the installation. I don't like this at all, so I changed the name of the computer and restarted the computer. The name of the computer was changed after the restartup, but ugly folder names remain the same and I can not even rename the ugly file name.

  I had done some restorations system on this computer before, I never noticed a problem like this before.

  1 have we seen this before?

  2 I forgot something?

  3. can I safely delete the original user profiles and records under the program folder program files?

  4. can I do a system recovery really CLEAN? I understand that the crapware will be installed during the system recovery. I'm ok with that, what I want is my pc to be recovered to the original state of the plant.

  5. I can read is no longer my 1st disc restore dvd. Is it possible to make another set of recovery disks?

  Thanks for reading my long message!

  1 have we seen this before? I saw something similar and other relief to be fixed.

  2 I forgot something? I don't think so. Just do an another hard drive recovery. Try again is all I can think about.

  3. can I safely delete the original user profiles and records under the program folder program files? I would'nt mess with her. Just do another hard drive recovery system.

  4. can I do a system recovery really CLEAN? I understand that the crapware will be installed during the system recovery. I'm ok with that, what I want is my pc to be recovered to the original state of the plant. Yes. Used hydrogen peroxide call destructive (or full) non-destructive vs. Make a full - restoration destructive to put things o back the way you bought it.

  http://support.HP.com/us-en/document/bph07145

  5. I can read is no longer my 1st disc restore dvd. Is it possible to make another set of recovery disks? By all means, out juice of repair disk and try to get it back. If you can repair the disk, make a copy or 2 whole and store them in a safe place. Otherwise, you will have to order them from somewhere on the Web... as a popular auction site.

  Thanks for reading my long message! You are welcome. Thanks for posting. I hope my answer helps.

• If the hard disk dies this affect router/WiFi?  I know that this seems to be a strange question.

  If the internal hard drive dies this affect router/WiFi?  I know that this seems to be a strange question.  Logically, they seems to be two independent functions.  However, since I do not understand how it works...

  I plan to spend my old airport extreme (about 7 years) at an airport new Time Capsule or Airport Extreme for better wi - fi range.

  Where the internal hard disk come into your Airport Extreme or Time Capsule dying airport upgrade?

  If the disc is dead, it will be not not to be replaced. This should be done first before to other devices.

• Strange question - width ListItem

  While developing applications, I noticed a strange question.

  When I draw list in qml item available, it's very nice on an excerpt:

  I put

  horizontalAlignment: HorizontalAlignment.Fill
  

  and the width of the list item fill all empty space, but when I check the list on Simulator it encapsulates the width of content?

  Does anyone know how to set the width of the listItem to fill all the space from left to right?

  To sum up,

  I want to have (and it looks like this on qml overview):

  

  but I get this (width of list point fits only the content):

  

  Thanks in advance.

  Hi, there may be simpler but for me it works using the spaceQuota:

  ListItemComponent {
      type: "item"
      Container {
  
          background: Color.Red
          Container {
              preferredHeight: 230     
  
              layout: StackLayout {
                  orientation: LayoutOrientation.LeftToRight
              }
  
              Container {
  
                  layoutProperties: StackLayoutProperties {
                      spaceQuota: 1
                  }
               }
           }
       }
  }
  

• Strange question - data double on table 12 c JDev

  Hello

  I have a strange question in my table. I use Oracle JDeveloper 12 c. In my page, I use 2 VO and a secondary has a problem with the display of data - it displays two times. Heard that I deleted the table and put it in my page and always the same problem.

  No matter if I have all the data to my record in the table primary or not, when there are data to display then it shows twice. I do not know it can help, but for more information table is located in the popup.

  Anyone have this problem?

  Kind regards

  WK

  You must specify exact jdev version (there are two versions of 12 c)

  I had this problem in 12.1.2(a il y a longtemps, et à cause de trop de bugs dans cette version je n'a pas pris la peine de trouver la raison), but it seems that this problem went to 12.1.3(at moins, pour mon application)

  Dario

• This may seem like a strange question, but im trying to encode two buttons Flash Adobe, next and previous, however, when I put the thumb to the next scene and play on the next button and the previous scene and play on the previous button, it keeps switchi

  This may seem like a strange question, but im trying to encode two buttons Flash Adobe, next and previous, however, when I put the thumb to the next scene and play on the next button and the previous scene and play on the previous button, it keeps switching autour.

  If you have symbols of button on the stage to the next and previous, each of these symbols has an instance name with a listener event attached to it. The event listener is linked to a mandate. You can have a single event point to a function. So for example, if you have a next button and a click event that points to a function that says something like nextFrame(); and then you want to use the next button to point to a function that says something like nextScene(); you will need to use another instance of this next button and have this different instance to use a different event handler to point to a different function. Who help me?

• Strange question USB CPU intense operations...

  So I was hitting this strange question lately with my R4 Aurora...

  During an intense application or game, the power of my keyboard & mouse will start go on and outside... fan start office turns up and down at the same time. The computer will continue to function, but as the USB power goes on and outside, I can't use the keyboard to stop. I can hit the power button on the computer and usually it stops just fine.

  Could be that your diet is more stressed.

  If you connect a USB2 Hub supplied with 50W power brick, what happens?

• strange question use stop() to control a scenario after loadClip

  Hello, I have this strange question:

  I want to control the scenario of a swf file loaded with loadClip command.

  I wrote this code

  var loader: MovieClipLoader = new MovieClipLoader();

  loader.addListener (this);

  function onLoadComplete(_mc:MovieClip) {}

  _mc. Play()

  };

  loader.loadClip (swfname, _root.holder)

  function pause() {}

  _root.holder.stop)

  }

  function pause a button is used to stop playback of the loaded movieclip.

  strange thing is that stop() works when you test the movie by the flash application and plays from the projector. It DOES NOT WORK when he runs by embed code html in swf or swf directly.

  I checked a lot of time and the name of the 'container' is resolved, but the command does not work for his screenplay.

  thanx for help

  Daniele

  you wouldn't expect this stop() never work.  Once the loading starts, stop() no longer applies to the target of a loadClip (or loadMovie) method.

  to resolve, use the stop() on the first frame of the loaded swf file editing.

• Strange question: How do new dimensions go upwards, not downwards?

  Hey, I have a strange question. When I change the dimensions on a document and for example make it bigger, the bottom becomes higher in the direction down. But... How can I get, if you know what I mean? When I do the larger dimensions, why he cant increase upward?

  Does anyone know how to do this?

  The dimensioning of the scene is based on the top left corner, any change in the size will be push to the right or down.  You can't change what I know.

• strange question by inserting the data...

  Hi everone,
  
  I have a strange question. I'm not looking I do something wrong or is this a bug?
  I do a simple ' insert into table (select statement). Everything is ok... It's inclusion. But when I run the
  "select statement" separately (actual data I need to insert), I get different data inserted in the table.
  
  -> I have observed something else where there is a "case statement" in the selection m than the data in the table are spoil...
  
  EX:
  
  SELECT TRIM (member_span.member_nbr) member_nbr-> this one I see the correct data
  (
  CASE
  WHEN SUBSTR (member.member_nbr, 10, 2) = '00' THEN TRIM (member.member_nbr)
  Of OTHER SUBSTR (member.member_nbr, 1, 9). '00'
  END Subsciber_nbr),-> This data are spoil seeing incorrect data in the table...
  
  
  Database version:
  
  Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bi
  PL/SQL Release 10.2.0.2.0 - Production
  "CORE 10.2.0.2.0 Production."
  AMT for HP - UX: release 10.2.0.2.0 - Production
  NLSRTL Version 10.2.0.2.0 - Production
  
  < b > "" "did exactly the same thing in a different database. I don't have any problems out there"" "I'm getting problem only with this database < /b >"
  
  Anyone know a bug related to this problem?
  

  INSERT
  INTO member_load(member_nbr,   subscriber,   ymdbirth,   security_group,   group_nbr,   network_id,   cob_date)
    (SELECT TRIM(member_span.member_nbr) member_nbr,
      (
     CASE
     WHEN SUBSTR(member.member_nbr,    10,    2) = '00' THEN TRIM(member.member_nbr)
     ELSE SUBSTR(member.member_nbr,    1,    9) || '00'
     END) subsciber_nbr,
      (
     CASE
     WHEN LENGTH(member.ymdbirth) = 8 THEN member.ymdbirth
     ELSE NULL
     END) dob,
      (
     CASE
     WHEN TRIM(member_span.group_nbr) IN('108076',    '108077',    '108078',    '108079',    '108080',    '108081') THEN 'E'
     WHEN TRIM(member_span.group_nbr) IN('107001') THEN 'M'
     WHEN TRIM(member_span.group_nbr) IN('107005') THEN 'J'
     ELSE 'A'
     END) security_grp,
       TRIM(member_span.group_nbr),
      (
     CASE
     WHEN TRIM(member_span.business_unit) = '01' THEN 'N' || TRIM(member_span.business_unit) || '-' || TRIM(member_span.prog_nbr)
     WHEN TRIM(member_span.business_unit) = '03' THEN 'N' || TRIM(member_span.business_unit) || '-' || TRIM(member_span.prog_nbr) || '-' || TRIM(member_span.carrier)
     ELSE NULL
     END) network_id,
  
      (
     CASE
     WHEN LENGTH(member.ymdverify) = 8 THEN member.ymdverify
     ELSE NULL
     END) cob_date
     FROM member_span @dblink,
       member @dblink
     WHERE member_span.ymdeff > 20090908
     AND member.member_nbr = member_span.member_nbr
     AND TRIM(void) IS
    NULL
     AND member_span.member_nbr NOT IN 
      (SELECT member_nbr
       FROM member_span @dblink
       WHERE(20090908 BETWEEN ymdeff
       AND ymdend)
       AND TRIM(void) IS
      NULL)
    )
  ;

  Please help me with this question...

  Marella Phani wrote:

  sven
  
  different NLS settings....
  How can i find the NLS setting on both the databases..
  can i query some metadata table to find that..
  

  Please let me know how to proceed

  Anurag...

  It is not the problem with my SQL (that I know of). It gives a correct output that I need when I simply run the SQL query.
  I just give a few examples of data (no real data).

  But when I run Insert in staging_table (select statement). I do not see the correct data in staging_table...

  Thanks for all the replies...

  You can check your NLS settings with

  select name, value, isdefault from v$parameter where name like 'nls%';
  

  or in sql * plus with

  SQL> show parameter nls
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  nls_calendar                         string
  nls_comp                             string
  nls_currency                         string
  nls_date_format                      string
  nls_date_language                    string
  nls_dual_currency                    string
  nls_iso_currency                     string
  nls_language                         string      AMERICAN
  nls_length_semantics                 string      BYTE
  nls_nchar_conv_excp                  string      FALSE
  nls_numeric_characters               string
  nls_sort                             string
  nls_territory                        string      AMERICA
  nls_time_format                      string
  nls_time_tz_format                   string
  nls_timestamp_format                 string
  nls_timestamp_tz_format              string
  SQL> 
  

  Please be careful, that my comment about to_char was that under the assumption that you have a column for the number. If the column is VARCHAR2, do not add an extra TO_CHAR around this column. He could not give problems, but is not necessary (I think it can give problems in 9i, but impossible to find a small example yet).

  An idea to find the source of your problem would be to change the NOT IN subquery. At least in a NOT EXISTS a subquery. Or even better find a way to access the remote tables only once instead of twice.

  not exist

  INSERT
  INTO member_load (member_nbr,   subscriber
  )
  (
    SELECT TRIM(ms.member_nbr) member_nbr,
      (
     CASE
     WHEN SUBSTR(ms.member_nbr,    10,    2) = '00' THEN TRIM(to_char(m.member_nbr))
     ELSE SUBSTR(to_char(ms.member_nbr),    1,    9) || '00'
     END) subsciber_nbr
     FROM member_span@dblink ms,
       member@dblink m
     WHERE ms.ymdeff > 20090908
     AND m.member_nbr = ms.member_nbr
     AND TRIM(ms.void) IS
    NULL
     AND NOT EXISTS
      (SELECT null
       FROM member_span@dblink ms1
       WHERE (20090908 BETWEEN ms1.ymdeff AND ms1.ymdend)
       AND TRIM(ms1.void) IS NULL
       AND ms.member_nbr = ms1.member_nbr)
  
  )
  ;
  

  Is ymdeff a number or a string? If it is a string, then change 20090908 in '20090908'. If it is a number then keep as it is.

• Strange disconnection sound on Satellite L750-1KU

  Hello

  I have a strange sound disconection randomly on my laptop Satellite L750-1KU.

  I read on the forum, but it seems that there is no solution for this.

  My question is if there is a solution to our problem.

  PD: my laptop serial number is YB233977W

  In my opinion it's the wrong way to solve this problem. I mean I don't think that if it's a good idea to change parts of the motherboard, chips or anything else on your own.
  You are 100% sure that there is problem with sound chip?

  The same happens when you use headphones or external speakers?

• Strange question on Satelite R830-1GZ

  Owner for two weeks. Everything worked well, but today I had a strange thing happen
  I was connected to a Wi - Fi modem. Then I disconnected the modem and signed in btfon.

  After that, I noticed Skype contacts were not connected, so I have closed Skype. I then immediately open Skype. Before you have time to charge that a blue screen appeared and windows must close.

  So I was surfing when this happened. When I rebooted, it did this automatically, all load fine... but Skype charged only to the extent where my user name, that is to say, I had to re enter password, I have never had to do before. This would be a matter of Skype?

  I am terrified, as I just finished an acer that blue screened at the drop of a hat which treats. This happened only today once. I put the laptop under extreme pressure up to now and not a murmer, it may be just a stop?

  Skype works fine and usual railway accidents (chrome) nothing untoward happened. Brightening laptop, wow

  Hello

  BSOD is a hardware or software problem.
  I got a BSOD from time to time, but in my case it was a software problem, the system has been altered and I installed it again this improved my performance.

  I guess you could start Notepad correctly and Skype working properly too right?
  Well, maybe it was a problem of temporal software who knows but similar Skype problem happened to me after installing the new version of Skype, I assume that the necessary sound to you connect again using the Skype password after these major updates

• Re: Click on Satellite A300 - noisy HARD drive - strange of sound while booting

  Hi all

  I'm new and I would try to solve some problems with my new laptop * SATELLITE A300-1MZ * (with Vista) and * its hard disk * (a MHZ250BH of Fj-simens).

  I noticed that he is very mechanical in the normal conditions of use, in fact, when I turn on my computer, I hear a clear rattling and his mechanic from the HDD at different times also when there should be no disk activity.
  * Particularlly every 3-5 seconds * I hear a very strange noise as a small but very distinguible mechanic "CLAC" (is not refer to number of cycle ordefrag or indexing workload). Ditto on my ubuntu LINUX distro.
  However the phone never crashes

  _It first start Appareed and it's very noise_.
  I would ask if this is normal... It appeared regardless of the AC or battery power source.

  I just make a SMART software which is no problem, but I'm very worried about this problem.
  By phone, I just say all this to the center of Toshiba in my country, but for them all right. The laptop works ok.

  Not to mention that I found that * HDD * becomes * hot * also if there are no programs or processes that use it.
  He begins to 29a ° - 31Â ° and it gets hot with normal use (35 ° - 36Â ° after finished booting and after 30-40 min temperature is become more warm-42a ° - 46Â °, when its average temperature is ° - 48Â ° 46a - imagine if I turn for example a virus scan or a very hot video coding software-It to become: 50a ° - 55Â °.) (I try always not to overcome this final temperature). What is the maximum?

  * I hope you can give me an explanation to the problem.*
  * I ask if this is a problem common to other A300 owners.*

  For my personal reflection, that noise, it is very distinguible for a cooler quiet fan system (infact my dual core is 43a ° with normal use)
  Infact I would like to find a system to enable more cool fan (I have just seen in the bios and utilities from Toshiba but found nothing to that effect)

  Finally, I would like to know if the * battery time * 1h30mins (with the symmetric mode) is acceptable for a new laptop (with save mode is 1h40mins max).
  * I hope your support and I apologize for my language school *.

  Thanks y'alls.

  Hello

  I think that it s nothing wrong with your HARD drive.
  I have two cell phones and a PS3 at home.
  The HARD drive in a laptop made similar clicking sound. In addition, I noticed the same sound in the PS3. Since the upgrade to 500GB drive HARD makes the similar sound as the HARD drive in my notebook.
  I think that it s nothing wrong with the HARD drive and eventually it s nothing serious.

  > Finally, I would like to know if the battery of 1h30mins (with the symmetric mode) is acceptable for a new laptop (with save mode is 1h40mins max).
  Battery working time depends on the use of the laptop.
  The battery lasts a shorter time when to implement applications performance on the laptop. Also if the brightness of the display is set to the highest level, the battery needed to dump a lot more quickly.
  So I think 1.30 min is OK for the laptop. Of course, you can buy a stronger battery in order to use the laptop longer with battery power.

• A strange question Windows Update (Vista HP x 64)

  I need assistance with a strange:

  My system:
  HP Pavilion Elite d5200t ATX PC
  -Genuine Windows Vista Home Premium with Service Pack 1 (64-bit) digital cable tuner
  -Processor of Intel (r) Core 2 Quad Q9400 [2,66 GHz]
  -4 GB DDR2 800 MHz dual channel SDRAM [4 x 1024]
  -Hard drive 500 GB 7200 RPM SATA 3 Gb/s
  -768 MB NVIDIA GeForce 9600GS [DVI, HDMI, VGA]
  -Drive Blu - ray & DVD SuperMulti Lightscribe drive
  -Port LAN on motherboard (10/100/1000Base-T), wireless
  -15-in-1 memory card reader, USB 2, 1394, audio, video (for TV Tuner)
  -ATI TV Wonder external cable digital tuner + TV tuner internal

  After a few months everything works well, the other day, I could no longer use "Windows Update", which failed with various error codes.  (Will post a final later with update log because I'm away from the computer at the moment.)  However, I'm looking for a general hypothisis here, not a specific solution.  So Far, in any case.)

  So I tried all the usual remedies, stop services, rename files as C:\Windows\SoftwareDistribution, restart services, re-register all Windows Update DLLs, no joy.

  Try restoring the system to a point where I know that updates were working.  No joy.

  OK, I have a disk image (Macrium Reflect) which will restore all (including the MBR) up to a point where I know the updates have worked.  Reformat the active partition, restore disk image including image MBR, Windows update STILL does not work.  Of course Windows Defender does not update definitions either because it uses the update services.

  Then, I tried a complete restoration of the partition of the hard disk system restore then system restore disks.  Don't agree.

  So HOW IS THIS POSSIBLE?  Restore the PC with a system restore disc image disc not back to the point where Windows Update works?  What is the assumption here?  What type of virus/spyware could survive a restore disk sector by sector, including the MBR?

  Is there some sort of a BIOS virus that could do this?

  What are the possibilities here?

  As I said I can post newspapers and specific error codes, but I tried all the solutions, I found online for these codes (and others) without success, until I'm looking for a general assumption of what kind of trouble could survive the new image and restore.
  
  I have disabled all virus, firewall, etc.  I've even around my router directly connected to the cable modem.  I ran hardware tests, no problem.  There is the HP Advisor software that is currently running, but he was executed before the start of the original system and at the time where I saved the disk image, and it does not interfere with Windows Update then.

  Add information - I ran at least 5 different virus/spyware packages to see if there is no virus/rootkits etc. detected and everyone was negative.

  Any ideas?

  Thank you

  John

  Hi John94062,

  Thanks for the posts on the community forum.

  Reading this post the words "datastor" was what initially was out of me.  For now, however, each log placed in this thread of community reflects a date and data which seem to be some time long ago in the past.  The first was 27/03/09 and the second shows 16/04/09.  In my opinion, he must make a good backup, a clean format and reinstall - without using any Marcurim or any other image software needs to be done.  I also recommend taking off from USB keys or any other external media, as this takes place. Reinstall using the true authentic Windows discs.

  John94062, the image stands out as if it keeps the installation that causes the error.

  Be sure to have all disks in Windows, all product keys and all the software manufacturers, third-party CD/Media and their product keys before proceeding with this action and all data and important files backed up on external media before performing this action.

  Also, if you use a HARDWARE RAID configuration, be sure to check with your hardware vendor for any band perforated or any error causing corruption data.  Those that can be replicated to the backup.

  I know that it is stated that a new facility took place, but the dates don't seem to reflect a clean install.  After installation, backups that are restored on the system may have a bad file that can replicate itself on the system so try all updates with only the operating system on the System and before you install other software or backup on the system after the CLEAN install.

  Sounds drastic, but something is not reflecting more correct when all dates appear as some time before that happens the clean install.  We will therefore try a Clean format and reinstall using the genuine Microsoft discs, and not just any what imaging software then try the updates only to the operating system on the system.  Let us know if the updates install then.  If they then this is something which is being restored from the backup, you can restore a data segment at a time until the culprit is isolated.

  Please let us know if this helps you or if assistance is needed.

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• BlackBerry Smartphones strange question need help ASAP!

  I have a strange problem with my Blackberry "BOLD" 4 9900, sometimes when I receive or make a call, the phone is connected and I don't get 2 hear the person at the other end, and vice versa, the only solution for this is hard reboot the phone that is like taking the battery and have it pop back in and then things works very well and it's soething that happens daily is there a way to diferrent without restarting the phone and why it happens instead of 1 m, also I got the replacement of the device like the previous, it was cut and after investigation of blackberry, they gave me a new device. The version of the OS in the mine is 7.1.0.746 (2108), I was invited by the service 7.1 bundle downgrade and backup center 1646, which I am not ready to do what it takes forever and I have to reinstall all the software back and set up e-mail. What would you suggest?

  Also the latest BBM version which is 7.0.1.23 is installed, my phone that has WiFi but unlike previous versions where they had a backup and restore under backup management option that is no longer there, there at - it a way to get that back, I had uninstalled and reinstalled BBM but still does not work and the desktop software is not save BBM groups or pins?

  Bold_4_9900 wrote:
  Well thank you for the steps of IMRT I'll take an impression outside until I do it just to be double sure and I installed restart me that works well but has 2 questions in my mind. Why my phone should behave mumb silent n when I get a phone call or have to do one and the is to run return is of restarting it.

  This happens usually when application runs in the background, or because of any unknown third-party application installed within our system, or due to lack of memory. Reboot to shoot some time A battery is enough to solve this problem. If press and hold the Menu for a few seconds, it will appear a screen that will display all the programs running in the background, usually five will always be there (host, BBM, Message, phone, browser) you can always check if any other applications. are running in the background, if they then close them properly.

  We should always try to close Applications correctly - avoid using key end to close the applications because it just minimizes the application and let it run in the background. Instead, press the Menu key, select close or Exit to exit the application. Do not leave your browser open on a page of Web active when not in use. If programs are running in the background, that this will lead to problems that you are experiencing now. Please take a look at this Article, I don't know that it will help you overcome your problems:

  KB14320 : How to maximize the battery life and available memory on the BlackBerry smartphone.

   

  Bold_4_9900 wrote:
  Also, you mentioned the OS upgrade to make the site of Vodafone UK as it approves Indian have not come out, I hope it's a generic file and has nothing to do with zonal or regional my phone settings.

  There is no generic OS! The link I gave you is an official OS from Vodafone UK, install it without any hesitation he will not affect your device 

  Let me know if you have any questions.