Stream 7: reset

Similar Questions

• OSMF with HTTP data stream search resets the starting index...

  Hello

  I built an OSMF player that allows users to get to where they were during the recovery, but also to rub at the beginning.

  FOR EXAMPLE:

  A flow is 1 minute.

  The user starts playing in 25 seconds.

  The user can rub-5 seconds or transmit to 55 seconds.

  It works perfectly with RTMP - TimeTrait reports correctly and video is displayed correctly.

  FOR EXAMPLE:

  Start at 25 seconds, TimeTrait reports: duration = 60, current position = 25 and video display is 25.

  Seek to rewinds 5 seconds to the current duration = 60, position = 5, video display is 5.

  But...

  With the HTTP stream...

  Start at 25 seconds. TimeTrait reports: duration = 60, current position = 25 and video display is 50.

  Search rewinds 5 seconds before the beginning of the stream and give me a media full... end of the stream.

  Start at 30 seconds, TimeTrait reports length = 60, current position = 30 and the video display is 60 Yes give me a media full... end of the stream.

  It is quite clear that what is happening is that search HTTP stream reset my starting index to the point of looking as if I had started to play with:

  NetStream.play (seekPoint);

  Rather than:

  NetStream.play();

  NetStream.seek (seekPoint);

  This, I hasten to add, is a terrible problem from the point of view of my client because it means actually I can't resume content.

  Does anyone have ideas, workarounds?

  G

  After digging in OSMF code I found a SOLUTION:

  First of all, make sure you have the latest OSMF source inside your project.

  For now it is 2.0.71 (org.osmf.utils.Version).

  Go to org.osmf.net.httpstreaming.HTTPNetStream

  and make a few changes:

  1 change the line # 1441

  _initialTime = _dvrInfo! = null? _dvrInfo.StartTime: currentTime;

  TO
  

  _initialTime = _dvrInfo! = null? _dvrInfo.StartTime: (_seekTime > 0? _playStart: currentTime);

  2. change the line # 1496

  _initialTime = currentTime

  TO

  _initialTime = _seekTime > 0? _playStart: currentTime

  That's all!

  Now you can listen to MediaPlayerCapabilityChangeEvent.CAN_SEEK_CHANGE event

  and immediately.

  By the way: If you're going to find all the bugs related to this change feel free to post them here!

• getJSON application using ColdFusion proxy

  I'm following this article by Ben Nadel - do not know if there is some other better tutorials out there. In any case, I kept getting the Variable ALLARTICLESDATA is not defined. error.

  < script type = "text/javascript" >

  Run when the DOM is ready.

  $(function() {})

  jForms var = $(le «formulaire»);

  Connect the form.

  () jForm.submit

  function (objEvent) {}

  Get the Owl knowledge items.

  GetArticles();

  Prevent default.

  Return (false) End Function

  });

  });

  This method performs cross-site AJAX

  using a ColdFusion proxy page.

  function GetArticles() {}

  {$('#searharea').keyup (function ()}

  var searchField = $('#searharea').val ();

  var myExp = new RegExp (searchField, "i");

  $.getJSON('ajaxProxy-KB.cfm', {proxyURL: 'https://app.knowledgeowl.com/api/head/article.json', )

  name: {}

  $regex: searchField.

  $options: "I."

  }},

  {function (Data)}

  Console.log (data.valid, data.data); Data.Data is an array of information!

  output var = ' < ul class = "search results" > ";

  $(data.data, fonction (i, article) {} .each)

  output += '< li > ";

  " output += ' < h5 > < a href =" https://kb.mysite.com/help/pdfexport/id/'+ article.id + ' "> ' + article.name + ' < / h5 > '; "

  output += "< /li >";

  });

  output += '< /ul > ";

  $('#resultarea').html (output);

  }); get JSON

  });

  }

  < /script >

  < cfoutput >

  < section class = 'block' >

  < ul class = "tabs" >

  < li > < a href = "# tab1" > Search < /a > < /li >

  < li > < a href = "# tab2" > Article < /a > < /li >

  < li > < a href = "# tab 3" > class < /a > < /li >

  < /ul >

  < section id = "tab1" >

  < input type = "text" id = "searharea" name = "searcharea" placeholder = "Search the article name" > < / input >

  < div id = "resultarea" > < / div >

  < / item >

  < section id = "tab2" >

  < cfif! IsJSON (allArticlesData) >

  < h3 > The URL you requested does not valid JSON < / h3 >

  < cfelse >

  < cfset allArtData = DeserializeJSON (allArticlesData) >

  < cfif structKeyExists (allArtData, 'data') >

  < cfloop index = "i" = "1" to = "#arrayLen (allArtData.data) #" >

  " < h5 > < a href =" https://KB.mysite.com/help/pdfexport/ID/#allArtData.Data [i] user.user # "> #allArtData.data [i] .name # < /a > < / h5 > .

  < / cfloop >

  < / cfif >

  < / cfif >

  < / item >

  < section id = "3" tab >

  < cfif! IsJSON (cateData) >

  < h3 > The URL you requested does not valid JSON < / h3 >

  < cfelse >

  < cfset cfDJData = DeserializeJSON (cateData) >

  < cfif structKeyExists (cfDJData, 'data') >

  < cfloop index = "i" = "1" to = "#arrayLen (cfDJData.data) #" >

  < h5 > #cfDJData.data [i] .name #-#cfDJData.data [i] user.user # < / h5 >

  < / cfloop >

  < / cfif >

  < / cfif >

  < / item >

  < / section >

  < / cfoutput >

  And here is my proxy page.

  <!--

  Check if the page request is a POST or a GET.

  On this basis, we can understand our target URL.

  ->

  < cfif (CGI.request_method EQ "get") >

  <!-based on a URL get target url. ->

  < cfset strTargetURL = URL. ProxyURL / >

  <!-remove the target URL. ->

  < cfset StructDelete (URL, 'ProxyURL') / >

  < cfelse >

  <!-get target url FORMS-based. ->

  < cfset strTargetURL = FORM. ProxyURL / >

  <!-remove the target URL. ->

  < cfset StructDelete (FORM, 'ProxyURL') / >

  < / cfif >

  <!--

  Remove any AJAX anit-setting cache which has been used by jQuery. This

  a random number is intended to help ensure that the GET URL are

  not implemented cache.

  ->

  < cfset StructDelete (URL, '_') / >

  <!--

  Make the HTTP proxy request for help. When we do that, trying to convey information to CGI that was made by the initial application of AJAX.

  ->

  "< result cfhttp ="objRequest' url = "#UrlDecode (strTargetURL)" # "method =" #CGI.request_method # "useragent =" "#CGI.http_user_agent #" timeout = "15" > "

  <!-add the referer which was past-po->

  < cfhttpparam type = "header" name = "referer" value = "" #CGI.http_referer # "/ >"

  <!-pass the values to the URL. ->

  < point cfloop = collection 'strKey' = "#URL #" >

  "< cfhttpparam type ="url"name =" (strKey) #LCase "#" value = "#URL [strKey] #" / >

  < / cfloop >

  <!-transmit the values of the FORM. ->

  <!-< element cfloop = 'strKey' collection = "# FORM #" >

  "< cfhttpparam type ="formfield"name =" (strKey) #LCase "#" value = "#FORM [strKey] #" / >

  < / cfloop >->

  < cfhttpparam type = "url" name = "_authbykey" value = "56a7d8c123131c4058361567" >

  < cfhttpparam type = "url" name = "project" value = "55c4ffd123131c567e294fe6" >

  < cfhttpparam type = "url" name = "status [$in] []" value = "published" >

  < cfhttpparam type = "url" name = "status [$in] []" value = "review" >

  < cfhttpparam type = "url" name = "_fields []" value = "name" >

  < / cfhttp >

  <!--

  <!-debug requires more up-to-date. ->

  < cfset objDebug = {}

  CGI = double (CGI)

  URL = double (URL),

  = Double (SHAPE) SHAPE,

  Ask = double (objRequest)

  } / >

  <!-debug output to the file. ->

  < cfdump

  var = "" #objDebug # ""

  output = "#ExpandPath ('.)" (/ ajax_prox_debug.htm") #

  format = "HTML".

  / >

  ->

  <!--

  Get the content as a byte array (by converting it to binary,

  We can send the appropriate length as well as use it in

  the binary response stream.

  ->

  < cfset binResponse = ToBinary (ToBase64 (objRequest.FileContent)) / >

  <!-Echo back the response code. ->

  "< cfheader statuscode =" #Val (objRequest.StatusCode) "#" statustext = "#ListRest (objRequest.StatusCode, ' ') #" / >

  <!-Length response Echo back. ->

  < name cfheader = "content-length" value = "#ArrayLen (binResponse)" # "/ >"

  <!-Echo back all heaers response. ->

  < item cfloop = 'strKey' collection = "#objRequest.ResponseHeader #" >

  <!-Check if this header is a simple value. ->

  < cfif IsSimpleValue (objRequest.ResponseHeader [strKey]) >

  <!-back Echo header value. ->

  "< name cfheader =" "#strKey #" value = "#objRequest.ResponseHeader [strKey] #" / >

  < / cfif >

  < / cfloop >

  <!--

  Echo of content with the appropriate mime type. With the help of

  the Variable attribute, we will ensure that the content

  Stream is reset to zero and THAT the response will be returned.

  ->

  "< cfcontent type =" "#objRequest.MimeType #" variable = "#binResponse #" / >

  It turns out that I don't need this block of code cfloop. The error is actually the cfheader tag. It works fine without the cfloop in this moment, so I'll just remove.

• Stream 13-c002: 10 broken Windows, recovery &amp; reset fail.

  Hello.
  
  I bought a laptop HP flow, with 10 Windows pre-installed.
  
  I burned a set of recovery disks. I also got the product key OEM of Windows from the BIOS.
  
  Then my broken Windows 10. Cannot start. Get reviews of the process died error.
  
  Then I tried to recover. I get errors on the recovery of all and reset methods. Tried to 'keep my files', 'erase disc', etc..
  
  Then I downloaded and installed the unique language of Microsoft Windows 10 N ISO. It installs and runs without error.
  
  But he does not accept the product key OEM HP on this Stream l.
  
  I suspect that the store may have updated the computer from 8 to 10, and the OEM key is for 8, not 10.
  
  According to the HP website, my warranty is active.
  
  What can I do? I believe that, if the computer comes with 8, then if HP would provide 8 installation disc, that would solve everything. The recovery partition is not, so I need the complete installation disk.
  
  Or any other solution?
  
  THX,
  Johny.

  Hello

  Looks like the machine shipped with Windows 8.1 so it must have been updated with the windows 10 - this means generally that the upgraded version would be 10 Windows Home 64-bit.

  As long as the installation of Windows 10 has been enabled, the profile of this material should have been registered with the Microsoft activation servers and reinstall the correct version should translate into automatic start-up; but it is version dependent.  Try to perform a new installation with 64-bit Windows 10 Home as stated in the guide on the following link.

  http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

  Alternatively, you can order a set of recovery media for Windows 8.1 starting on the link below.

  Support of order recovery HP.

  Kind regards

  DP - K

• Laptop HP Stream - 13-c010nr: flow for laptop - 13-c010nr factory reset

  Help, please!

  How can I Factory Reset my mobile Stream?

  I accidentally erased information and cannot get past the opening screen.

  So, how can I reset my laptop if I can't paste welcome screen?

  Hi there @PhoenixLee79 
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  In response to your question, please see the following pages on the system recovery.

  Performing a recovery of HP (Windows 8) system
  Troubleshooting (Windows 8) HP system recovery problems

  If you have any questions let me know.

• HP Stream 13: Wifi disappeared completely, even after factory reset.

  Hello

  We had a trouble that started with the laptop does not not on one day. We managed to turn it on, but now there is no wifi.

  In programs and features I see there is a driver Broadcom "installed" but there is no version and there is no file size. I deleted and tried to reinstall a new driver, but that stops at half way through and doesn't seem to work.

  In device manager there is no sign of a wifi device, it's as if it disappeared completely.

  I tried all types of factory reset, same one that completely resets all doesn't seem to work.

  I have no way to connect the laptop to the internet because there is no Ethernet cable port. So I downloaded the driver on a memory stick from another computer and it stuck in the said laptop - no joy.

  Any help would be appreciated.

  Thank you

  Bradley

  @Bradley12345,

  Hello and thanks for the display on the HP support forums.  If you wifi does not appear in Device Manager, that this means that the map does not work or is not connected properly.

  Here is a link to the manual for maintenance of your system.

  HP PC laptop stream 13

  You can use this to see if you can access the wifi card to make sure it is placed correctly.

  If you are not able to do this you want to contact the HP support by phone for repair options.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Thanks again for posting and have a great day.

• HP Stream: How to reset the password of windows 10 HP flow

  I have a laptop HP Stream and the person I got it from is deceased and I do not know the password for windows. He has just upgraded to windows 10.  Can someone please?  There is nowhere that I see to reset the password.

  bev6usa

  Reset the password

  https://account.live.com/password/reset

• How to reset my photo in photo stream?

  Hello

  My photo stream is seriously incomplete, blocking to 160 photos, when there are more than 500 in the last month. I tried to turn off my photos, then again on stream (in System Preferences-> iCloud-> pictures and in Photos.app preferences), but I recover the sam 160 photos.

  Is it possible to restart from scratch? Or maybe a way to manually add photos that I would be here to share with my other devices?

  Synchronization of my complete photo library on iCloud is not an option (> 180 GB...)

  Photo stream keeps only the photos for 30 days.

• Stream laptop HP 13: hard reset HDMI.

  Hello
  I recently broke my screen so I use a screen tv with an HDMI cable. I was doing a PowerPoint presentation and then it froze so I restarted my laptop, but when I went to turn it back on the screen remains empty, but it lights up. I tried the hard reset on the phone, but I do not see it in the HDMI TV screen. And I was wondering if there is a way to get everything back operational again? Thank you.

  Hello
  Sorry I just sort all thank you.

• Stream HP Netbook PC 13: Bios reset password

  Hello

  I have a laptop HP Stream 13 I forgot my BIOS password can someone help me with this system to disable the code which is 84483173

  Thank you

  At the password prompt try

  31581175

• Stream HP: need to reset the password of SMA

  EU update my hp laptop stream that runs Windows 8. No return to the top. Could not connect because I forgot that the original password was using a PIN code. Now I can't connect without the SMA password. Please help me!

  HI @Angelw221,

  Welcome to the HP Forum!

  It's a great place to find answers and advice! You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums: first time here? Learn how to publish and more.

  I have the bar who after refreshing your laptop you are no longer able to identify you with a PIN and you have forgotten the password.

  Here is a link that should help you to overcome this difficulty.  Computers HP - what to do when you forgot your connection password (Windows 8).

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem. "Think about scoring the post that solves your problem as" ","accept as Solution " to help other members of the community!

  To say thanks for the help, please click "Thumbs Up icon" below.

• HP Jet 7: Stream 7 BIOS password HP does not / how I can reset it?

  I can't my Jet 7 HP BIOS.
  
  After pressing 'Power + flight upwards' it leaves me the "Start menu".
  When I press F10 to enter BIOS he asks me to "enter the administrator password."
  After a few attempts, I finally got the message: "disabled system [85799247]

  Y at - it a method to change the admin password?
  
  Thanks in advance.

  Yes, enter here error code to get the password.

• stream hp factory reset 7

  How to get rid of the blue screen... Yes I pressed the power button and the volume upward and down key but I still have a blue screen that says TPM (trusted platform module module)

  WARNING: Compensation erase the information stored on the TPM module. you lose all created keys and access to data encrypted by this key.

  Press Yes to clear the TPM

  Press not to reject this change request and continue

  But I can't press anything... Any ideas on what I should do?

  If you have an OTG adapter and a USB keyboard, attach those to meet the command prompt.  Someone else here has also suggested holding the volume buttons up and down together while turning on to access the menu of UEFI.

• Reset to factory Airport Express?

  I have the Ethernet cable installed throughout the House in large part driven by current wireless issues. I have a new Airport Extreme 802.11ac and three airport expresses to 802.11n. Is it advisable to make me a reset factory at the Airport Express before their reconfiguration in a mobile network? Any other tips and tricks to look out for? I hope that this will lead to greater stability in the Apple TV streaming, but also performance of Airplay (i.e. dropouts) three airport expresses. Thank you!

  Is it advisable to make me a reset factory at the Airport Express before their reconfiguration in a mobile network?

  Yes, given that configuration utility "Assistant" Apple AirPort requires airports to be reconfigured are in a factory default state.

  Any other tips and tricks to look out for?

  Assuming you have tested to make sure that the Ethernet connections are working properly, the installation process is extremely simple and intuitive.

  Put each Express to default settings

  Connect the Ethernet cable to the WAN "O" port on the AirPort Express Terminal

  Click the WiFi on your Mac menu and then click on AirPort Express to the new AirPort Base Station registration

  

  When you click on AirPort Express, the configuration wizard "" will take a few seconds to automatically provide the correct configuration

  

  Type a device name you want to call the AirPort Express

  Click Next, and the wizard will put up everything for you automatically and correctly

  Cick is when you see the message Setup is complete... and you're done with this Express

  Set up the other two one at the same time expresses exactly the same way

• Browser gets temporarily unstable after using it for a period of time, until reset

  I just installed Windows 8.1 to my computer, and I am currently using the latest version of Firefox. I noticed that after I used the browser for a while, when I'm watching a video stream, or scrolling / clicking through the pages, the browser hangs temporarily for a second.

  The thing that keeps the ground being restarts Firefox (with and without addons). As the browser becomes jerky, I tried other browsers like IE to see if it applies as well to that, and he behaves in a more fluid way.

  After awhile, it gets really annoying to have to reset the output and start the browser, each time that it starts to be shaken. Speculation as to what might bring him?

  Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  1. Open the Firefox Options (Preferences on Mac or Linux) as follows:
     • In Firefox 29,0 and above, click on the menu button

       

       then select Options Preferences on Mac or Linux, or Windows.

     • In 28.0 Firefox and earlier versions, click on the Firefox orange upper-left button, then select the 'Options' button or, if there is no button up Firefox, go to tools > Options.
  2. In the window of Firefox Options (or preferences), click on the Advanced tab, and then select general.
  3. You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  4. Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.