Stress Test System

Similar Questions

• Deployment of a new scheme of database on a Test System?

  Hello

  I created a new MYSQL schema (on a development machine) I want to deploy a number of test systems.

  What is the best way to do it? Is there a file somewhere in the directory of TestStand I can copy?

  Thank you best regards &,.

  Don1.

  I don't think that you are correctly using the schema definition. The scheme applies only to the database. The schema does not exist in TestStand and you do not the schema port anywhere except if you want to install a new database somewhere database options for a specific read/write database schema are stored in the TestStandDatabaseOptions.ini file and you can choose to include this point in a deployment.

• stimulate a testing system

  I wonder if this is possible.
  I work with labview 7.0
  If my system I using labviewo 7.0 hooked up with a computer dell; with a chassis pxi with about 6 pci cards.
  the dell computer I have 2 serial ports.
  My question is...
  If I run labview 7.0 on my labtop: which are not connected to the test system itself. However, there is no way to connect to all the material.
  I can stimulate something to create a dummy pci card so that I can see how my software is running?
  in another, it is easier to change the codes on the systems that I have the equipment connected with the software?
  or can I change with the software on a laptop and stimulate the pci functions...
  I asked a couple of my colleague, ex-co-worker and told me you can't, while other say you can.

  those who say yes asked me to consider the issue.
  can someone tell me?

  
  

• Stress test

  Hi all, is there a tool to stress test your environment vWorkspace? I found: http://vdirantsandraves.com/ku-vworkspace-multi-session-initiator/ but he does this job to 7.6 and 8.0.1?

  Hello again,

  I checked with our quality assurance team and we recommend a commercial product for testing of constraint to follow. Please let us know if you have any additional questions.

  www.loginvsi.com

• BSOD when a stress test (occurs after several Windows update)

  I just built a new computer and it has been great to work for the first week but it has been giving me BSOD everytime I try to perform a stress test. Can someone please look at my dmp file and identify what is causing the problem?

  Thanks to anyone who can help me.

  https://onedrive.live.com/redir?RESID=935D31C1A8533E82! 408 & authkey =! AAYUHaOvnqgz0M8 & ithint = the file % 2cdmp

  SFHMU

  With a DMP file we cannot tell if it was hardware or the stress test itself.  What stress test you were running and why were you running?

  The DMP file points to Genuine Intel so I suspect that you was running Prime95 and test the CPU. If this is the case and that you want us to study it there a memory full DMP (large file) is located in C: | Called WINDOWS MEMORY. DMP.

  In both cases, this accident is called a BCC124 and you can read more about it here

  They are called BCC124 and are related to the material.  Read how to diagnose, and if all goes well to correct their read this wiki

• Are there any tools to stress test and generate tracing information to analyze?

  I'm looking now from an Android Developer. Are there tools for stress test (Android tool Monkey) a BlackBerry app in the Simulator and the device?

  How can I create a log for blocks of instructions in a class file, similar to what I can do with the android.os.Debug class?

  Thank you.

  You're out of luck on the BB env... I also just Android...

  I don't know all the stress test tool - you will need to write your own...

  You can connect a debugger via Eclipse... you can not a stack trace, UNLESS you catch

  a Throwable or you catches the Exception... and even then your code cannot

  obtain or generate the stack trace... to look in the newspaper of the peripheral events - and IS NOT

  tell you the line number... only the method is in...

  Compared to the Droid - debugging on BB tools are extremely primitive... is a Java 1.1

  implementation as well, so don't think you'll be carrying on your Droid code without a lot of

  changes (ArrayList to the vector... etc.)

• database stress test - datagenerator problem with import data from oracle

  Hi all
  
  Today, I'm doing a stress test on my new server. Someone from this forum told me that there is a nice software for it:
  
  http://www.dominicgiles.com
  
  I have a problem with Datagenerator. I can't fill my user directly in the database. DataGenerator always has an exception. What ever...
  
  I tried to generate data on hard drive. It seems to go well. In the file data, I found a large number of files:
  
  *.dat
  *. CTL
  *. SQL
  
  N, anyone know how I can import only the files of user oracle?
  
  
  see you soon
  
  Dlugasx

  I do the table drop in the first place, I think it's to be sure, there are no objects before loading.

  Nicolas.

• HP pavilion 205t - 500 CTO: failure of DST short test system

  I recently had problems with my computer and I did a test of the system that came with the Id 9gf14k-79j87h-qffv6k-60rn03 failure. -What it means and how to fix it?

  @JockoTheTaco, welcome to the forum.

  This error message said you that your hard drive has failed.  Your only option is to replace it.  You should buy a disk HARD of the same size or larger to ensure that recovery media will work with him.

  Here's a guide to help you with the replacement.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP NOTEBOOK: Test System quick: drive hard SMART check failed

  What should I do when my quick test of the portable system says my SMART drive check failed?
  
  Failure ID: 9LPBSK-7SC875-XD7WLK-608Y03
  PRODUCT ID: T0X74PA #UUF

  Replace the hard drive is all what you can do. This is a fairly new laptop, it is still under warranty?

• Test system has no stand A1000-G stopped

  My ZTE G-1000 entered into test mode. It shows the following message appears on the screen.

  PS

  Do not touch in the first 5 seconds

  Touch the second 5 seconds.

  ALSPS step 1 FAIL

  ALSPS step 2 FAIL

  Nipple Fail! System shutdown! (bottom end)

  Not able to get out of this mode and also not able to tab.

  Please suggest a way to solve this problem.

  Thank you!!

  Hello

  Thanks for the reply.

  I kept it running until the battery has drained. Then I plugged in the charger and the tab back. He started to work normally.

  Thank you

• HP G62: DST short test system Diagnostics failed HP G62

  Hello.

  Windows 7 x 64 SP1

  I managed the system diagnosis HP test that you can access during startup by pressing ESC. The computer passes the test of memory and disk hard test but failed the test at startup and testing of tune-up with the same error:

  DST short failed

  Failure ID: 9LNF9R-50881W-XD014J-60QG03
  Product ID: XF522EA #AB9

  What does that mean?

  Thank you for your time and your help.

  Hello

  It really sounds like the HARD drive starts to fail, then it would probably be better to replace it before installing Windows 10.

  The only other option that might be interesting to try would be to zero the drive then reinstall the original OS and see if you still get the uefi diagnostic errors.

  You have your media recovery (disks or USB key) to be able to reinstall Windows 7?

  Kind regards

  DP - K

• Price NETWORK card for the Test System

  Hello world

  I have a test with an installed Intel PRO/1000 GT PCI card system and everything works fine.

  I would like to get a few more cards to help with failure on etc, but the Intel are pro £25!

  Does anyone know of an ESXi 4 compatible PCI NIC that is cheap?

  I've seen maps around the £10 mark, but they have not been on the list of comparability.

  Thank you guys

  (Prices seem to be on the scale in the world, so if its not expensive in your country, chances are it will be cheap in mine also)

  The following lists whitebox tested:

  http://ultimatewhitebox.com/NIC

  http://www.VM-help.com//esx40i/esx40_whitebox_HCL.php

  iDLE-jAM | SC 2, SC 3 & VCP 4

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points.

• Test system update fails on ORA-01113: file 1 needs media recovery

  I use Oracle 9.2.0.6 on HP - UX (B.11.11)
  
  I'm refreshing to a test of production on the same server system.
  
  The update fails on...
  
  ALTER DATABASE OPEN RESETLOGS;
  ORA-01113: file 1 needs media recovery
  ORA-01110: data file 1: ' / elltest/system/system_01.dbf'
  
  
  I do mainly:
  -Place prod tablespaces in backup mode
  -Copy the files from production to test directories
  -Take prod tablespaces out of backup mode
  -pass the prod (once for each newspaper group) log files
  -copy files from archive prod to test
  
  STARTUP NOMOUNT
  
  Create control file from a copy of the prod trace file
  (CREATE CONTROLFILE REUSE SET DATABASE 'ELLTEST' RESETLOGS ARCHIVELOG)
  It works
  
  RECOVER DATABASE USING BACKUP CONTROLFILE
  -J' I grab the last log archive copied during production.
  
  ALTER DATABASE OPEN RESETLOGS;
  ERROR on line 1:
  ORA-01113: file 1 needs media recovery
  ORA-01110: data file 1: ' / elltest/system/system_01.dbf'
  
  I think I have I have all required log archiving prod?
  
  Any advice?

  What you're trying to do is an incomplete recovery of the database. Since the redo logs are not used in your recovery you must explicitly specify the time to stop. If you do not process assumes a complete recovery and will require a request for reinstatement of online recovery log data that you do not.
  You can use UNDO based recovery with
  RECOVER DATABASE UNTIL CANCEL USING BACKUP CONTROL FILE;
  then type CANCEL after the last active log has been applied.
  Open with option RESETLOG database. It should work.

• HP envy 15k207NX: quick test system

  What is the meaning of this qc1x71-7pp7sk-mfpwmg-60vu03 code of failure?

  Hi @Rcrentillo,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP ENVY 15-k207nx Notebook and the QC1X71-7PP7SK-MFPWMG-60VU03 error message.  This error is failure of Quick Test on drive 1. What this means is that your hard drive may be faulty.

  I recommend the first thing to do is back up your personal data files etc as soon as you can.

  Try perform a reset.

  When you perform a hard reset note remove all USB devices. Disconnect all non-essential devices.

  Here's a video that might help. It shows you how to reinstall the HARD drive, which is sometimes useful.

  Here is a link to check to see if you are in warranty.

  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .

  Thank you.

• Loading test system - addition of Oracle

  Hi all
  
  I just want to add a new system of LIGHT Agent to the server from the OLT. Can someone help me on this?
  
  Kind regards
  Sagar

  Hi Sam,

  To add a new VIEW Agent System:

  Select systems in the Manage menu to view Systems Manager.

  Select the System Agent VIEW.

  Click new to display the System Agent VIEW Add.

  Enter the system name in the name field and enter the name or IP address of the system in the field host name or IP address.

  Click OK.

  Click Close.

  Note: systems and the system of groups appear in the list of tab systems generate scenarios.

  Kind regards
  Rajesh