String date/Conversions
Hello. I tried to understand this all day and I'm at the end of my rope. I'm basically calls a web service of my application, and I need to send a Date as a parameter object. When I create an object date like this:
Date myDate = new Date();
And try to display the date (myDate.ToString ()), it gives me a non desired format. 15 February 15:00 America / New York etc... Basically, I want my Date in the format "yyyy-mm-dd hh-mm-ss + 0000" or something similar (dd/mm/yyyy, dd-mm-yyyy), it is not serious. How to convert a string into a Date, or at least the value of the Date format of the objects above? I looked everywhere and people mention SimpleDateFormat.parse (something I can't use even apparently that this method does not recognize my IDE) and people using Calendar objects. I can't find a clear answer (if there is a direct response). Any help at all would be greatly appreciated.
I also tried HttpDateFormat (or whatever it's called) with no results at all, same format weird when I say date.ToString(). And HttpDateFormat does not produce a Date object, it produces a long. I know you say Date myDate = new Date (long), but it gives me the same weird format, I mentioned above.
Calendar.getTime () returns a Date object
Tags: BlackBerry Developers
Similar Questions
-
Hello
Is it possible to convert the string "date (2006, 5, 29) ' in a date object?
Thank you
Jason> Is it possible to convert the string "date (2006, 5, 29) ' in a date object?
If
aString = "date (2006, 5, 29).
then don't
adate = value (aString)
do you want?
Unfortunately, I do not think that the seconds property (very useful)
remains intact when you convert a date <->leave a string - can you
give an overview of what you want to achieve? For example, the
vList xtra can record all the data types of the Director without having to make
any conversion.->
-
What writing (string data) return?
My question is in regards to NationalInstruments.NI4882.Device.Write (string data)
If I run this command while the GPIB bus is busy, it will return once the message that I was in is aligned, or it will come back once the message that I passed in is sent successfully on the GPIB bus?
Thank you for your help
This function expects actually until the message is sent, and it receives an acknowledgment from the receiver. Update the status table that is returned when the write is complete before it is returned to the calling program.
-
TDMS replace specific fields with the new string data
Hello
Wonder if someone could advise a more easy, more clean solution or I may end up making a big mess on my diagram!
I use DaqmxConfigureLogging.vi to write data in the .tdms and this file everything works. Unfortunately, this vi affects physical names such as Dev1/ai0 channel names in Journal of root and group of tdms files.
I would like to read individual fields where they are written and replace them with the names of channel. The location of these channel names is fixed on the tdms file. However, I noticed using file i/o functions, such as file open/close/set position could not work, because these files do not seem to recognize the .tdms file. And it is not all fields tdms functions you want the value of the positions on sheets of root/channel files tdms and read fields desired as string data.
Any suggestions? I can miss something quite simple!
crossrulz wrote:
k waris wrote:
"In fact, it uses some names you give the channels and groups.
I use Dev1 / ai0:15 connect all 16 channels. Unfortunately if using 'name to assign' entry will not do the job in my case!
Of course, it will be. Use a loop FOR with DAQmx channel create to create each channel and give them a name.
Just to clarify what I meant here...
-
dynamic double bit data conversion
It could be very simple, but I was confused. I have current data and average data as in code. I want to build the table using these data, save them on my hard drive and open in word with header (current and average)
Problems:
I have data from two sources in lead generation and versions table as shown entry table to write on the worksheet vi. I get the error source is dynamic and double sink is a bit. It is the most difficult part of my life to find out what range of conversion to use.
When I run the vi (lets assume the good range of conversion is connected and there is no conversion error) pops up the dialog for path that comes up constantly on dialog
Ideally I want appears on the screen when I press on would go so that I can browse location to save the file, and once the path is specified vi works continuously and the data is written to the worksheet while vi is running.
Thanks a lot for reading and help
See you soon
Welcome to the evil world of dynamic data. What you really want to use is the merging of signals feature. When you do this a dynamic data conversion will be automatically added between the signals to merge and writing on a spreadsheet file.
You can consider using writing to the file position as directly accepts dynamic data.
With respect to the path, use a shift register.
-
ORA-28500 + 'String data, right truncation' when selecting nvarchar (max)
Hello
I was able to put in place a db Oracle 11.2.0.1 link to SQL Server 2005 using DG4ODBC.
When you try to select a column with the data type of nvarchar (max) in the db link I get the following error:
The actual data in the column do not exceed 31 characters, but the application still does not work.ORA-28500: connection from ORACLE to a non-Oracle system returned this message: [Microsoft][SQL Native Client]String data, right truncation {01004}[Microsoft][SQL Native Client]String data, right truncation {01004}[Microsoft][SQL Native Client]String data, right truncation {01004}[Microsoft][SQL Native Client]String data, right truncation {01004}[Microsoft][SQL Native Client]String data, right truncation {01004} ORA-02063: preceding 2 lines from SQLSERVER_DBLINK
Any suggestions?
Thank you.checked with DataDirect ODBC driver that returns for col2 = nvarchar (max) and col3 = varchar (max)
Entry hgopcda at 2010/12/23-11: 55:17
Column:2 (col2): dtype:-10 (WLONGVARCHAR), prc / scl:1073741823 / 0, nullbl:1, radix: 0 byte: 2147483647, sign: 1
Out of hgopcda, rc = 0 to 2010/12/23-11: 55:17
SQLFetch ENTER [1 args]
I [0] StatementHandle: h0x0816ff40
---> RC = 0(TRC = 0)
OUTPUT SQLFetch [1 args]
I [0] StatementHandle: h0x0816ff40
Entry hgopcda at 2010/12/23-11: 55:17
Column:3 (col3): dtype:-1 (LONGVARCHAR), prc / scl:2147483647 / 0, nullbl:0, radix: 0 byte: 2147483647, sign: 1
Out of hgopcda, rc = 0 to 2010/12/23-11: 55:17This driver correctly fills the buffer (0 no equal) and function of the buffer the gateway decided to map it to:
DTY NULL-OK LEN MAXBUFLEN PR/SC CSE IND MOD NAME
12 Y VARCHAR 20 20 0 / 0 0 0 200 col1
-1 LONGVARCHAR Y 0 0 0 / 0 0 0 220 col2
-1 LONGVARCHAR Y 0 0 0 / 0 0 0 220 col3and in Oracle when performing a describe statement I see the column as LONG.
This type of mapping from nvarchar to LONGVARCHAR works in Dg4ODBC if the Oracle DB character set = Unicode. => and you meet this requirement.
==>> If it looks like a driver problem, and it might be useful to use a different driver.
Published by: kgronau on December 23, 2010 12:02
-
string 1-d dynamic data conversion
Greetings,
I am acquiring data controller series.
Now the problem is that the data is a string which I converted in table 1 d NOW I want to save that live data in text files that can be viewed in EXCEL.
I used 'write to measure file' box that is used for this purpose, but he accepts the output signal which is a string of 1-d.
Please guide me how to solve this problem.Hello
Please find front and change the code to display this should solve your problem.
1. Add? property to true if the data is not overwritten. (see image)
2 give a valid path (see image like E:/abcd.csv...you can be any valid path)
-
Date conversion madness! String to date and vice versa
Hello, I am working on an application targeting the OS version 4.5.x. I read a lot of messages and the links on this topic and can't seem to make the correct code.
OK, here's the problem. I ask a timestamp date string to a server. The timestamp is the local time on the server (IS / PST etc.) and not GMT.
My application must take time and subtract a number of days ranging from 1 day to 1 month. to get a "start" date The application must then provide the start and end date in a string format that it understands. Seems simple isn't?
Here's the catch, however the time stamps should NOT be changed by the local what is using the device. For example, a device in Italy can contact the server located in Ottawa and ask a timestamp, the calculations shouldn't care about DST or time zone. Just take the supplied date and subtract a fixed number of days from her. Nothing more or less. This proved incredibly hard to do. first the HttpDateParser.parse (ServerTimeStamp) will be the subject of Date GMT and my problem is back to the zone specified in ServerTimeStamp.
Thanks for any help in advance.
My method
public String getDAFIXMLRange (String ServerTimeStamp) {}
String szRange;
First analyze the incoming date and record them at the time of the last election.
Day DAFIEndDate = new Date (HttpDateParser.parse (ServerTimeStamp));
m_lLastPollTime = DAFIEndDate.getTime ();
define the offset. Pre-programmed for simplification.
lOffsetNumberOfSeconds long = 2 * 24 * 60 * 60;
Calculate the start date by subtracting the offset. Multiply by 1000 to convert to milliseconds!
Date DAFIStartDate = new Date (DAFIEndDate.getTime () - (lOffsetNumberOfSeconds * 1000));!!!!!!!!!!!!! HOW the DATEFORMAT OBJECT is used to get the output format ' yyyy-MM-dd' you HH: mm: "without the marker of time zone. The server knows that it is local to it. !!!!!!!!!!
Now format the objects date as a string that includes the XML server.
DateFormat DafiDateFormat = DateFormat.getInstance (); ' YYYY-MM-dd' you HH.!!!!!!!!!!!!!! THIS IS THE PART I'M CONFUSED on, with the HELP of zone to create the good date. !!!
Time zone tz = TimeZone.getTimeZone ("IS");
int adjEST = tz.getRawOffset ();Convert 'em in string format.
String szDAFIStart = DafiDateFormat.format (DAFIStartDate);
String szDAFIEnd = DafiDateFormat.format (DAFIEndDate);Replace the date calculated in the end segment ranges date XML.
szRange = statItems.replaceAll (XML_DATERANGE, "TAGSTARTTIME", szDAFIStart);
szRange = statItems.replaceAll (szRange, "TAGENDTIME", szDAFIEnd);
Return szRange;
}Hello
Yes would be better if the server could provide you date to the GMT time zone, or date as a long.
But if you can't ask the case on the server, one way might be to manually parse your string and create a new date of parameter values in a calendar, something like this
Calendar cal = Calendar.GetInstance ();
Cal.Set (Calendar.DAY_OF_MONTH, date)
Cal.Set (Calendar.MONTH, month-1)
Cal.Set (Calendar.YEAR, year);
' set the new time with the values, you must cal.setTime (cal.getTime ()-,...);
and then put the date with SimpleDateFormat.
I think that this could be a solution if you know the format string you recived that date and it won't change.
I'm not sure but maybe it could be a solution.
Kind regards
-
String to date Conversion inside XSLT
Hi all
I want to convert a string of (Eg: 2009-12-06 00:00:00) to a type of format date yyyy-mm-dd Vice versa.
I managed to convert the Date to a string
< element name = "input" type = "date" / > (schema)
< element name = "result" type = "string" / > (schema)
< ns1:SIDtoCRMProcessResponse >
< ns1:result >
< xsl: value-of select = "xp20:format - dateTime (/ ns1:SIDtoCRMProcessRequest / ns1:input,)" [M01] / [D01] / [Y0001] [H01]: [m01]: [s01] ")" / > "
< / ns1:result >
< / ns1:SIDtoCRMProcessResponse >
but when try to String in Date
< element name = "input" type = "string" / > (schema)
< element name = "result" type = "date" / > (schema)
< ns1:CRMToSIDProcessResponse >
< ns1:result >
< xsl: value - of select = "xp20:format - dateTime(/ns1:CRMToSIDProcessRequest/ns1:input,"[Y0001]-[M01]-[D01]")" / > "
< / ns1:result >
< / ns1:CRMToSIDProcessResponse >
his failure
I think the format dateTime function expects the entry date. Can someone kindly help me how to convert String to Date inside a xsl without using the external java function.
Thank youyou could use some dirty concatination to build the format yourself.
not going to win the beauty contest but
-
Hello
I have to read data from a flat file and insert it into the database tables.
In flat files, I have a few areas that let them date. And the formats are "November 21, 2008 03:49:44 ' and ' 21 December 08 03:49:44". "." I need to insert a date field in a database table that accepts date in 'MY-JJ-AA' (Ex 21 November 08) format only.
When I created for the flat file xsd, I treated fields containing the date in the form of string type.
Kindly tell me, how to convert this string to data format 'DD-MON-YY '.
I tried to use the dateTime format with the following parameters:
dateTime: xpression xpath to the field in the flat file.
Photo: "MON-DD-YY".
It is nothing inserted in the database. I don't know if the use is correct.
Please suggest.
Thank you
RVI just tested on my use case, and it worked.
in your file that you've read that I'm assuming that the value is January 13, 2009 03:05:21. So for future trials please always use so I know what you are using. If you want to try another format, tell me and I adjust accordingly.
As stated previously, that the only formatting required date is in this xsd, so if you do any formatting in an expression can you please delete.
The date format is the format mask that he if he waits.
When you use this code can you tell me the format he wrote, it should be yyyy-mm-ddThh. And tell me all the problems.
see you soon
James -
Hello. Small question. How to convert a date (String) in the following format:
JJ/MM/AAAA
on a Date? Then, I want to take that date and turn it into something like the Saturday, January 1, 2011. HttpDateParser seems as if he accepts not DD/MM/YYYY as the format.
Thank you.
I added a 3rd option for my suggestions above - that's the way I think you should do.
Also change the treatment of conversion so that you return a long and not a Date - it is an object less for the system to be managed. To get along a Date is just
. getTime(). Once you have the long, then watch SimpleDateFormat. In your case I think you want:
public static SimpleDateFormat sdFormat = new SimpleDateFormat ("EEE, MMM DD, YYYY");
Now, to get the channel of your choice:
String timeString = sdFormat.formatLocal (
); Should all work well for you.
Let us know how you go.
-
The Date conversion chain.
Hello
I used following code to convert string to date but apply the time zone of the device during the conversion. I don't need this but I
Here same time of this string.
as
String = '07:59:17.427 2009-07-31'
Date = 2009-07-31 07:59:17.427Date formatter = new Date (HttpDateParser.parse ("07:59:17.427" 2009-07-31));
SimpleDateFormat dateFormat = new SimpleDateFormat ("yyyy-MM-DD hh: mm:." "") "'SSS');
String strCustomDateTime = dateFormat.format (formatter);SimpleDateFormat format according to the local time zone. DateFormat does not work. see the documentation for the API
-
Disqualification: Date conversion problem
Hi all
For some reason, it turns out that which was built as 00:30:15 (HH) will be automatically converted to 12:30:15 (HH) as string value. See screenshot below.
Tried several things in the reference list of date format, but no resolution yet. How can we avoid this conversion?
Problem has been resolved:
Under two date formats have been contradictory:
DD/MM/YYYY HH: mm 23/01/2014 12:30 DD/MM/YYYY HH: mm 03/01/2014-10:10 Deleted the premiera and dates are converted correctly now.
-
Hi all
I have a requirement where I need to use a date column, but the date in the data base is in three separate columns day, month and year that are int. How can I get the column date out of these three and use it on the answers.
Thank you
Karthik.Pull all three columns, concatenate them in the format that your obiee server would recognize. You can get this format in NLS_DATE_FORMAT. which is the conversion to a string with the help of interpreters. Your o/p should be something like YYYY-MM-DD (based on the format of your server). Then this conversion from cast to date. You should be able to use the column that would be in the date data type.
I hope this helps!
-
Using APEX 4, I have a vision concat mulitple incident dates together with (2 slashes) as separator, as follows:
Look at the title of the Object Explorer with above data format. But when I attempt to create a report based on this point of view, the date of the incident column always shows as follows:empid, incident date 9001 10/06/2000 \\ 10/07/2000 9002 02/13/2002 \\ 02/15/2002 9003 09/04/2009
How could it happen? I thought that once the date has been concatenated, type column should become the channel. The column type was shown as string under column attrib in report apex region. How can I make it look exactly like what I have on the view? (MM/DD/YYYY mask won't work because it is a chain)empid incident date 9001 06-OCT-2000 \\ 07-OCT-2000 9002 13-FEB-2002 \\ 15-FEB-2002 9003 04-SEP-2009
Can you help me? I'm puzzled.
MunsharMunshar,
In your opinion, you are using to_char with a specific format mask or to_char without mask format, or just date1 |'-' | date2?
If either of the latter, then the database is having to make its best guess on how to convert the date to a string. It does this based on your NLS parameters, which may be different depending on how you enter the database. Best option is to be very specific about your conversion rate and use
to_char(date1,'MM/DD/YYYY')||' \\ '||to_char(date2,'MM/DD/YYYY')
If this does not help, it would be beneficial if you could at least give us the relevant part of the code from your view.
-David
Maybe you are looking for
-
Satellite L670-1HJ-speakers interns are not silent during the selection of line output
I want to use an external set of speakers, but when plugged, selection of output in the Realtek HD Audio Manager disables the internal speakers, instead only reduce their volume a little. Selection headset does not switch their stop, but this causes
-
New hardware found of notification for a non-existent printer...
I have XP on my machine. I never had a printer HP color laserjet 8500 PS on my system, but Windows keeps telling me that he found this printer. I can't disable this notification, and it appears at all times during my computer sessions. Even allowi
-
How to install this release of windows 7. 4 7600.226
-
9360 curve Smartphones blackBerry battery drains quickly!
Hi people, I bought the new BB 9360 curve three days back. The probem that I face is with battery. The battery does not last even for 6 hours. Very disappointing. I use the standard services of BB, with 3G connection. I would like to know if this nor
-
Impossible to change the themes
original title: My Windows 7 themes. I work for several years in the themes of Windows 7 (PRO). Recently & I don't know exactly when, it is locked on a single page of a theme and I can't even change themes. It seems actually them is changing, but the