stuck at 27% on the windows computer 8

Similar Questions

• USB formatted on the windows computer and then loaded with the IOS El Capitan files does not work on the Windows computer

  I tried to format a usb drive on my iMac home for use on a Windows computer. I tried to format it on the iMac with El Capitan and format on the Windows computer, but with the same question.  The files are corrupted and do not function correctly on the Windows computer at work.  The files are a combination of audio files and writing.  Is there a way to overcome this problem.  When I used earlier versions of IOS are not usability issues.

  iOS is for iPhones and iPads, but you also state El Capitan, so I guess that's what you're talking about.

  There are a lot of audio formats, many writing programs, so it is quite difficult to determine if this is a problem of format of file or a problem of disc format.

  Even if it's an mp3 player, wmv or any other file extension, there are more for the 'format' of an audio file of the extension.

  These designations are just wrappers that contain audio information. Audio information can be encoded in a variety of different formats and still be an mp3 or wmv. An mp3 player that plays on Windows cannot play on a Mac due to using a codec that is not installed on the Mac. Apple recently purged the operating system of older, obsolete codecs. As a general rule, VideoLan VLC can play most audio and video files on Mac and Windows.

  Were what type of writing files? Word, Pages, TextEdit,...?

• Can't access the files from the HARD drive of any account on the windows computer 7

  Hello

  When I tried to connect my Western digital external hard drive to a 32-bit desktop P 3 with a Windows XP SP1, then this HARD drive is not detected. Then I tried to copy his WD driver ITS a USB Flash drive, then isntalled all the WD HARD drive was always plugged into my computer. After that, the HARD drive was identified by computer and appear in my computer. As I thought that this folder has been created by the installation of the driver, did not exist on my HARD drive before connected to the desktop computer.

  When I plugged my WD HDDagain to my laptop HP with Windows 7 SP1 64 bit and I tried open this folder, and then the main folder only opened without facing access denied, however, access to all of its subfolders, and the files inside it has been declined.

  In addition, althoguh the username admin Curernet "Mohammad" can open the folder of human "83f04ce083fb03083bb88e50", as shown in the screenshot above, it can not access all of the subfolders, files in the main folder, and to access, I will need to use the scecurity tab. Thus, it would be absolute nonsense, if I want to have access to all of the subfolders, I will need to use the security for each tab.

  How do I gain access to all of the subfolders with use of the Security tab once the time (i.e. as long as all subfolders are inside the main folder, then simply use the main folder security tab?

  

  As long as the current username "Mohammad" can open the folder of "83f04ce083fb03083bb88e50" man, "Mohammad" is so allowed system to have access to the main folder as shown in the screenshot above, then I think that the username 'Mohammad' will have to reach all subfolders as well. However, when you try to open any subfolder or file, then the current user 'Mohammad' name could not have access to all of the subfolders in the main folder and all subfolders or files opening gave me this error below (screenshots below)

  

  

  I tried to remove this main folder, however, each time, I found myself with a loop "you need permission SYSTEM to make changes to this file.

  

  Original title: file access denied

  Groan.  It is so easy to fix, and you should have gotten a lot better support now.  Surprisingly, the worst suggestion came directly from the "Microsoft Support Engineer" Reda Singh, his suggestion potentially compromising the security of your computer while doing absolutely nothing to solve the problem.  Fortunately, it seems like you didn't do something quite right and so the script was not run.

  First of all, let me explain why this difficult access occurs in the first place.  Originally, you had three 'users' granted access to training, SYSTEM, Administrators, and Mohammad.  SYSTEM allows Windows to read your disk, and retrieve things like its label.  It can also allow your antivirus software to access the drive.  Because this OPTION is enabled, Administrators is not accomplish anything, even if you are an administrator.  As long as this OPTION is enabled, this permission only works for programs, that you manually raised to run as administrator.  This leaves access to the drive depend on the last entry, Mohammad.  The problem is the SID behind Mohammad is only good on the computer, it was created, so if you connect this HARD drive on another computer, no access is allowed!  Enter the security on the other computer dialog box, you can either see something "could not read permissions" or you will see the SYSTEM, directorsand a third entry with a long series of numbers.  It's your first computer Mohammad , and it will not work on another computer.

  It is not surprising that you're facing this problem because you are using the drive on multiple computers, which is running XP that is not UAC.  Here's how to unlock a storage drive (in Windows 7) so that it can be normally accessed in any PC without any permissions problem:

  1. Press [Windows] (or click on the circles to start), and then type "user account control".
  2. In the search results, click on "change user account control settings."
  3. Drag the slider to "never notify".
  4. Click [OK] to confirm the changes and restart your computer.
  5. Open Windows Explorer, right-click on the affected drive, and then click Properties -> Security (tab)-> [Advanced]-> owner (tab)-> [change].
  6. You should be on a dialog box that asks what you want to change the owner.  Click on Administrators.
  7. Check Replace owner of subcontainers and objects, and click [OK].  Windows should start processing all the files on the disc.  This may take a few minutes.
  8. When it's done, click [OK] to close the property message and then close out of all other dialog boxes.
  9. In Windows Explorer, click the drive affected again, and then click Properties -> Security (tab)-> [Advanced]-> [edit permissions].
  10. Now in the dialog box Advanced security settings , click the button [delete] repeatedly to remove all permission entries.
  11. Add SYSTEM and grant full control.
      1. Click on [Add...].
      2. Type 'SYSTEM' and press [Enter].
      3. Check full control in the allow column and press [Enter].
  12. Add Administrators and grant full control.
  13. Add users and grant Full control.
  14. In the dialog box Advanced security settings , you should have three entrances of permissions: SYSTEM Administratorsand users, all granted full control.  Check "Replace all permissions of child object with permissions inheritable from this object" and click [OK].
  15. Click [Yes] to confirm the replacement of permissions.  Again, Windows start to process all files on the disk, which may take a few minutes.
  16. When he finishes, close to all the dialog boxes and check that all records are now accessible.  You may have to refresh (or close and reopen) explore to see the changes.
  17. Assuming that it worked, we will re-enable UAC to reduce the vulnerability of temporary security, that we created earlier.  Press [Windows] and then type 'user account control '.
  18. In the search results, click on "change user account control settings."
  19. Drag the slider to the position below the top (position #2, by default).
  20. Click [OK] and restart your computer.  Now, the files remain accessible.

  This should straighten the permissions of your disk storage so that you can use it again.  You may need to empty the trash on this drive after changing permissions.

  Don't do this procedure on your C:\ drive, it will seriously reduce the security of your Windows installation.  This is for the readers of storage only.  If you need access to a specific file that you created to C:\, you can safely do the steps above on this issue, but never on the C:\ drive itself.  Please note that when you perform this procedure on a folder instead of a hard drive, you will need to replace this step #10:

  10. now in the dialog box Advanced security settings , uncheck the box "Include permissions can be inherited from the parent to this object" and click [delete] to confirm.  If some permission entries remain, click [Remove] until they are all gone.

  The concept is the same in Windows Vista, even if the exact steps differ from the foregoing at least Windows 8.  In Windows 8, you must also disable UAC with a registry tweak because, unlike Windows 7, UAC remains on even when the value of "Never notify", giving rise to all sorts of problems in Explorer tries to work with file permissions.

  Oh and to answer one other question I saw you ask from the beginning: this folder of the .net Framework was created by .net Framework Installer.  He breaks all the rules and frustrating unpacks his junk everywhere where it feels like.  I got it decompress on a front SD card, making the installation would take forever.  After installing the .net Framework, you probably disconnected the drive before restarting your computer, so these files let me.  Or the installation crashed and started you again.  Meanwhile, installs the failure left its Temp files behind.  It was supposed to remove the folder when the installation is complete.  You can remove safely as the folder manually.

• connect with the windows computer using usb after connecting to the wireless mac

  Printer HP Photosmart 7520 connected wireless to the new iMac using Fios router wireless.

  Can I connect the printer even to an old Windows computer (running XP) via USB without interfering with the connection Wireless for Mac?

  Hi Rekjek,

  On both wireless and USB is allowed. There should not be all the problems between the Mac and the PC using the same printer.

• Adobe first Elements 12 downloaded and purchased on the windows computer, transferable to a mac?

  I'm about to buy Adobe Premiere elements 12 on my windows computer.

  Can I transfer the licens for this and other Adobe products, to a new mac computer? Or are the licenses valid on all platforms?

  What should I do to prepare before? I read/hear about Inactivation of license on windows installed applications, before you install on the new computer - is that all?

  Johan

  When you buy items programs they are valid for each platform if you can not install the version of PC on a Mac and vice versa.  But you get access to two versions of the same license. Most of the applications sold by Adobe are not provided for both platforms with the same license however.

  You are allowed to have enabled facilities on both machines.  You can install on as many times as you like, but you can not activate more than two facilities.  You can disable if you need to activate another place.

• IMac-formatted external hard drive is not detected in the window computer

  I had formatted my drive external hard seagate new with the imac. now the problem is that it is detected in the iMac and not in my computer window. kindly help me in the detection of seagate in my computer window

  What format do you have selected?

  Ciao.

• All in one Photosmart C410 opens the folder of the Windows computer

  The computer folder to open and view the forces of HP Photosmart All in One 410 hard, removable storage devices, and network placement.  This happens on the start and restart.  That's like if I went to the menu start, access the computer icon and open it myself.  Measures: updated and uninstalled and reinstalled printer software.  Computer is Lenovo Z580, nine and examined by Lenovo for that matter.

  This problem only occurs when the printer is intalled.  Until the printer is intalled, the computer window does not open and display the contents of the folder.  After the uninstall window does not appear.  Any suggestions?

  Hello Psupprelief,

  I understand that you are having problems with your HP printer.

  In order to provide the best and most accurate response, please ask your question on our forum of the printer. You actually deposited to our laptop / desktop forum. Click on the link I have provided below and that will take you directly to the page of the printer forum. Choose the best category for your problem and then ask your question. You may need to create another profile before posting your question.

  HP printer forum page

  Thank you

• When I turn the Windows computer does not stop. I used hive cleaning. but does not work. have re installed several times,

  the computer I have I have a h.p. it ued wa when I got it. When I turn it on. a notice comes up saying that the driver installation is complete.  I have not laod a driver.  I'm not terms computer litterate.please profane EU. Thank you

  Hi johnbrandon,
   
  -What happens when you try to shut down the computer? You receive an error message or error code? If Yes, indicate the same.
   
  -Have you been able to shut down the computer without any problem earlier?
   
  -Remember you proceed with recent computer between the calendar changes when things worked fine and now?
   

  You can unplug the connected external devices, as appropriate and check if the problem is resolved.

  Here are some links that you might find useful. Try the methods listed in the following items and check, if this can help you in the matter of fixing:

  Your computer stops responding when you try to shut down in Windows XP

  Computer does not close properly if selective suspension is enabled

• 16-bit data base software does not communicate with NT4 server on the windows computer 7.

  We are a small manufacturing company. I installed old software database (16 bit) on windows 7 (64-bit) a year earlier. This software has worked for a few months and then it stop working. Database software still works on the old xp based computers, but it does not work on my windows 7. We believe that this database software is not communicating with our windows NT4 Server. It could be the update of windows 7, but we're not sure. I contact you because this database software is worked for two months on my computer and then suddenly stop working, it's strange, and now I am not able to install again. So is there someone who can suggest me what would be my next step.

  Windows 7 64-bit is not a 16-bit subsystem or a way to install the NTVDM extension that supports. You need to install a 32-bit version of Windows 7.

• Problems with the windows computer 8 loss of wireless connection?

  I'm on my 2nd NEW Dell with Windows 8 in the last 3 weeks. I use a Trendnet Wireless router to connect to the internet. The 1 Dell computer dropped the signal wireless on the 2nd day I got it. The 2nd Dell computer began the wireless signal very frequently the 5th day I got it. My Dell Inspiron 1545 computer that is 3 years old, 1 year 6 months never old old ipod and iphone removes the wireless signal. Help, please!  I've been in contact with Dell several times with any resolution of this problem,

  I'm on my 2nd NEW Dell with Windows 8 in the last 3 weeks. I use a Trendnet Wireless router to connect to the internet. The 1 Dell computer dropped the signal wireless on the 2nd day I got it. The 2nd Dell computer began the wireless signal very frequently the 5th day I got it. My Dell Inspiron 1545 computer that is 3 years old, 1 year 6 months never old old ipod and iphone removes the wireless signal. Help, please!  I've been in contact with Dell several times with any resolution of this problem,

  I have a new laptop from Toshiba with WIN 8 pre-installed, and I have the same problem.  I ran the program of problem determination and it reset the WiFi card and fixed an issue reported.  He canned breed, I have 2 WIN 7 laptops who have no problem at all.

  Symptom: In normal operation, the wireless connection to the router drops to limited connection (No. Internet).  It does not actually lose the router, he loses just an internet connection.

  Update - has visited the Intel site to check the drivers.  They had an updated driver, even if the driver search said I was current.  I updated the driver and 24 hours later I got not drops.  I hope that fixed it for me.   http://www.Intel.com/p/en_US/support/detect/wireless

• CD is not visible in the window 'computer '. It indicates that the driver has been disabled by another driver

  restart resolves the problem, then it repeats very soon

  Hello
   
  1. when the question is is produced?
   
  Follow the steps below and check if that helps.
  Step 1:

  I would say you click on "fix it" link for automated troubleshooting and fixing the issue below. If the "fix it" does not work, follow the steps manually.

  http://support.Microsoft.com/kb/929461

  Step 2:

  You can remove and reinstall the existing drivers. To do this, follow these steps:
   
  a. Click Start and then click Control Panel.
  b. click System and security, click System and then click on Device Manager.
  Note that if control panel is in Classic view, double-click System and then click on Device Manager.
   
  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
   
  (c) in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.
  d. When you are prompted to confirm that you want to remove the device, click OK.
  e. restart the computer.
   
  After the computer restarts, the drivers will be installed automatically.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Drive external hard used on the windows computer wants me to format the drive after use on a mac

  To get into the details, I have a 1 TB western digital hard drive that I used for a few months to work on a laptop running windows 7. One of my friends using a macbook borrowed my hard drive and now when I plug it into my laptop I got the error message "you need to format the disk in drive d, until you can use it. The options are to format or cancel it. If I have to cancel it, give me the D:\ message is not accessible. The disk structure is corrupted and unreadable.  This is the drive I have months of data to work on it and I need to be able to use it as soon as possible.

  Run as administrator command prompt and run the following command to repair the disk structure.

  CHKDSK D:/F/x

  It will correct the errors on the disk by removing the volume. Once the process is complete, try to access again.

• How to I take the EULA?  I click on accept, but he is stuck in a loop - the window disappears and reappears then asking me to accept again.

  I just downloaded Illustrator, but cannot open it.  The EULA window appears when I run the application, but the curls on itself whenever I click on accept.

  Hi Seomener,

  This document can help: the software license contract reappears after clicking on accept.

  If this does not resolve the problem, please let us know more details such as the products that you are trying to install and your operating system.

  Best,

  Del

• Pouvez the Superdrive Apple USB used with windows computer

  Can I use the Superdrive Apple USB with the windows computer

  Only on a USB Bus, which can provide more standard power 500 milliamps.

  Apple computers that support this drive directly have a USB function that allows it to attract more of the standard.

  Drive sharing

  If your Mac is not a built-in optical drive, and you must use a CD or DVD, you can connect an external drive as the SuperDrive Apple USB.

  You can also share disks of the optical drive of another Mac or a Windows computer that has the DVD or CD sharing Setup installed. Sharing of CD or DVD allows you to access documents stored on these disks and allows you to install some software.

• Cannot change the windows 10 homepage

  I updated my operating system Windows 10. Now, no matter what I do. Firefox will not change the start page. I refreshed, uninstalled and reinstalled with the same results. It will not load the page start I want. Reflecting on the cover page, I entered when you first set up firefox. I tried everything suggested on the web people and nothing. Any suggestions? I would like to Hat dating back to Chrome just for this reason.

  Do you mean that the parameter of start as you can see in "Options/Preferences > general" and in the pref browser.startup.homepage evolves?

  Create a new profile as a test to see if your profile is the source of the problem.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile already used in the new profile, but be careful not to copy files corrupted to avoid transporting more problems.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  Make a check of malware with several malware scanning of programs on the Windows computer.

  • https://support.Mozilla.org/KB/troubleshoot-Firefox-issues-caused-malware

  Please scan with all programs, because each program detects a different malicious program.
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender:
    http://Windows.Microsoft.com/en-us/Windows/using-Defender
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked