stuck on activation :(

Similar Questions

• Air IPad also get stuck cant activated after update 9.3 not only the ipad 2

  My ipad air also get stuck cant activated after update 9.3 Thursday so far seems that apple did not the solution... I did also his already suggests.

  Remove all the account update DHU icloud and restore from itunes, even now downgrade to 9.2.1 but still nothing... Stress really full with this apple product.

  I also have the same problem after that latest iOS update.

  Help, please

• Pay, download, standard xi acrobat installed. Stuck in activation!

  I'm quite annoyed how I found myself in this situation. Paid for the program, downloaded, installed. Put the serial number and now only to find out I needed a previous version of acrobat.

  I don't see anything on the purchase page who said that. In addition, I think in this day and age Adobe must have some sort of finder on your PC to see if you have a previous version before buy you.

  Now I'm stuck. Cannot load the pdf and cannot print them either.

  Adobe can fix this for me please?

  Hi Colin,

  It seems that you have purchased an upgrade to Acrobat.

  If you have an earlier version of Acrobat then only you would be eligible for this purchase.

  If the old version is installed on your computer and install the upgrade Setup program will recognize the old version and accept the serial number purchased upgrade.

  If you don't have the old version installed on your computer then you must keep serial number plu handy that the installer will try to detect the old version first and if it fails to find, it will prompt you to enter the oldest as well as the upgrade for the activation serial number.

  Kind regards

  Rave

• What happens if you upgraded to IOS 9.3 and your device is blocked on the activation mode, but can not recover apple id and password which allows you to set your device?

  I've updated the most recent update (IOS 9.3) in Night Shift & password protect notes, but my ipod touch 5g (an older device) is stuck on activation mode and it asks me for the Apple ID and password that was used to put in place this IPod. ID Apple listed is disabled and I can't reset the password. Help, please? I also try to delete everything that follows, so this does not happen.

  When EXACTLY did you do that?

  Today, there was a release of a fix for most of the devices

• G6-2330ee: Windows Activation Code 8

  Hello

  I have HP Pavilion g6-2330ee laptop with pre installed windows 8 64-bit with the recovery partition.

  I had to replace my drive hard because it is broken.

  My motto is out of warranty which ended August 24, 2014.

  How to find my activation key for windows, or how I can get it.

  Thank you.

  Thank you for your response.

  J've tried and installed windows 8, but it was not activated, I don't have activation key.

  The problem is that as I said I had replaced my hard drive with a new one bought the computer hardware so I did not support recovery or partition.

  Now I'm stuck with active United Nations windows.

  Is there anywhere where I can use the serial number of my laptop and I can get my windows key?

  Note: My laptop is out of warranty, as mentioned previously.

  Thanks again for your HP support assistance.

  Thumbs Up

• Activation key for Vista will not work

  Re-installed Vista (valid copy) 3 times on different computers in the House and then tried to intall on your laptop - now the product key does not work. So rather than buy a new product key for Vista, I prefer to get Windows 7 but do not want to spend $$ if he's not going to work. The laptop is stuck on activation without another internet access a screen that direct me to Microsoft to buy a new product key for Vista. Try to install Windows 7 with a drive will overwrite all this nonsense Vista activation?

  Hi joelmc26,

  If you have a product key then this "only" usable on computer product key "a". If you used the key poroduct to simultaneously install Windows on 3 different computers you're wearing violation of your license agreement. To be honest, if you do this, then I'm surprised that you got that day. If you install windows on another computer "you" he remove it completely from the previous computer.

  This error message receive you about activation? Already used, for example product key? To obtain the active product you must telephone Microsoft. See this link from my Web site:http://vistasupport.mvps.org/product_key_already_in_use.htm the service is automated, but you will get finally a 'real' person, if you carefully follow the instructions on my Web site. If you use the same product on three different computers you will not get an activation code. If, however, you have taken off a Windows Vista-based computer and then install on another, then you need to explain it to Microsoft. Then it's support technician if it gives you an activation code. If everything is legal and above all Council then there should be no problem.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web:http://www.winuser.co.uk;  Web: http://xphelpandsupport.mvps.org;  Web: http://vistasupport.mvps.org;  Web: http://www.silversurfer-guide.com

• Problem created SIM.

  I have an iPhone that I want to use as an iPod, the problem is that I'm stuck in activation because I have no sim card and have to finish the game. I was wondering if I could just buy a sim card from the original carrier, inactivated, to get passes, installation and in the home screen? Thanks in advance.

  As far as I know, the SIM card must be registered for use, to be recognized by the installer.

  Maybe you should visit a store of the carrier and ask them for help.

• Balance of Apple - cannot activate the debit card

  System performance decreases after a few months of use.

  That nothing worked, I had to 'Reset settings' to improve performance.

  After that, I tried to add my Apple debit card pay Wallet (one I added when I bought the phone and used very well until the Reset Settings procedure) and the card will not activate.

  Even after contacting the Bank and confirming that the card is active and ready to be used with Apple pay, even after deletion and add new card, reset the phone, contacting the Bank and which confirms once again that nothing works, the card is stuck in "Activation" even if up to the reset It worked fine.

  I use Apple pay almost everyday, and I miss not having him so... help!

  Hello

  It may help to follow the following steps on your iPhone:

  • Go to: settings > iCloud - at the bottom of the screen, disconnect.
  • Go to: settings > Touch ID & password - password turn off.
  • Restart your iPhone.
  • Reconnect to iCloud, turn on password and try to add your card again.

  When adding the card, follow the steps detailed here:

  Set up Apple pay on your iPhone, iPad, or Apple Watch - Apple Support

• No keyboard, no blocked on Windows 8 and Windows 8 boot disk does not start

  I have a 15 inch Macbook Pro mid 2013 (I think, I can check if it helps). There are 2 days that the SPACEBAR on my keyboard broke. I hear there as soon as I turn on my laptop it is still active as if I am pressing on it and as soon as I get to type anything, by pressing any other key on the keyboard, the EEG SPACEBAR take off and won't work at all. From what I could tell, it's an electrical problem with the contacts on the keyboard and after going a TI repair shop, they said that the only solution is to change the keyboard altogether. In the meantime, I bought a USB keyboard.

  I am also under Windows 8 in Bootcamp and I left it usually automatically connect to OS X and I just use the Alt key at startup when I go into Windows. However I have noticed that since the space bar is stuck and active at startup, I can no longer press Alt to change Windows, I decided to change the automatic boot from OS X to Windows disk and restart thinking I could just repeat the process when I am done going back to OS X. But for some reason unknown, Windows 8 will not start, just of takes me to the windows icon and freezes. Sometimes a message saying "Prepare the automatic repair" will appear under the icon of windows, but it is still frozen. Now I'm stuck in this boot sequence and I can't switch back to OS X since the Alt key will not work.

  Now my questions are: is there a way to switch partitions in the boot without a keyboard? Or is there a way to cut completely from the Mac keyboard and use the USB, one instead? Or even a way to break the contact of the space completely bar so stop because I change the keyboard completely in any case and it would be just a temporary solution? Thanks for any info!

  If the battery on your Mac has inflated because of charge cycles, it can push against the keyboard, causing its functioning. Have you checked the battery to abnormal expansion?

• Problems with SafeBoot

  Hi all

  I have an Aspire V3-572PG-530Y and I'm having some trouble with SafeBoot. I want to make my laptop dual-boot with Linux, but can not get the installation media to start unless I have switch from UEFI inheritance in the BIOS. Of course, this date means that I can't start Windows 8.1 after I installed.

  To install my Linux distribution in UEFI mode, I have to disable SafeBoot, but this option is grayed out in the BIOS. No matter how I try to access the options, I can select ever - he's always stuck it activated. I've updated to the latest version of the BIOS on the Acer website but stil can't seem to change the setting.

  Is there a way to get around this?

  If not, is it possible to request an update of the BIOS that allows this option?

  You must configure an administrator password in the BIOS, then the secure boot option will be available.

• Application and interface scrambled freeze when the effect is on the clip

  Dear users of Adobe.

  Some day my application Adobe first CC began to malfunction. Maybe some Windows 7 update or update graphics card fit, because when I saw this problem on a project, all projects, I opened have been made from this time and new project as well.

  DESCRIPTION OF THE PROBLEM:
  When I apply any effect to any clip, the user interface freezes. It works, but the display is hanged:

  -I can rub on the timeline, but the timeline indicator does not move (clip playing on monitor or second full screen and rubbing noise is there)

  -I can toggle effect, but the icon remains (I see on the photo that the effect is en/diss)

  -Effect cannot be edited or deleted

  -On some effects first freezes if I try to change the effect (kill application in the Task Manager is required)

  -Program start to answer (and I can edit effects) once I reset workspace. I have to reset the workspace after each / every effect is applied to the clip. What is bulky.

  -Problem exists with all the custom saved space and work with the first all those, as well with those I create new ones. Workspace so probably not corrupted.

  -J' have all Windows updates and the latest version of the software of GPU (I even tried several beta different drivers from nVidia, but no change to the problem).

  I have two screens on nVidia GTX770 (ASUS) where one is the program monitor, and it shows image full screen. Problem is the same if only one view is used, but while testing this I found another scenario where MISTLETOE is reset, without reset via menu option: If the focus went from the Panel to the PROGRAM Committee, GUI is reset and I can work normally. This work only if two panels are on the same group, the Panel of the hidden program because while the effect controls panel is active. If I drag the effects (on second monitor) TIME focus have no effect. I need to reset the workspace only.

  Some effects become not only which do not meet, but even the hang first if I try to edit before you reset space work (or switch effect-> program). In this case, I need to kill the process monitor first (Task Manager). If I reset the right of the workspace after that I place effect on clip, first work normally until I add new effect to new (or even) a clip. If I COPY-PASTE effects from clip to clip, it works without the reset workspace.

  When I close the first, more often it does not turn OFF in process list. I have to kill the process before I want to run again. Or restart the PC, of course. I know when he did not stop second doe to display full-screen does not return to the office, but stays black until I have to kill the first. First remains in memory even if I use only one view. QT32 process stops when I kill the process of creation.

  During the problem done first, Adobe Media Encoder does not work. It begins its own process of QT32 and it closes properly, without worrying first is stuck or active.

  I have a slight idea this problem started when I installed first CS6 and it have uninstalled after leaving Encore CS6 on the system. I think it is software problem, because lately, I is no rate of material. The system is almost 2 years old SB-E with INTEL DX79SR Board. I reinstalled windows, a few months before, but the problem started a week ago after some update or even CS6 associated. I can't say for shure. I have no install/uninstall other software PC lately.

  I use the 6.5 version first. I always solved my problems by reinstalling Windows and first or by finding the solution on the forums. This time I found nothing on all internet and I cannot reinstall system before finishing long project. But this problem, it is more difficult to finish. It seems that system is slower and less sensitive, as it used to be.

  Thank you very much for any advice or solution.
  MIHAEL

  Hi all

  It is a problem with the last GoPro Studio Installer. We're going to be it fixed in the next version of Studio of GoPro. in the meantime, you can solve it by removing the CineForm entries in the following folder:

  c:\Program files\adobe\adboe first pro cc\settings\badgeicons\

  Jake Segraves

  Director of technical support

  GoPro

• iMessage is stuck at waiting for Activation.

  Hello

  I have iPhone 6 Plus with iMessage stuck waiting for activation. May that what's wrong with it? These are the work with other vendors if I insert the sim card. Is it something to do with the question SMS relay or something else?

  Need help to solve my problem.

  Thanks in advance.

  If you get an error when you try to activate FaceTime - Apple Support or iMessage

• iPad2 9.3 upgrade stuck at the screen of the unavailable activation server

  I tried an ota on my iPad update 2 and it is stuck on the screen of activation with an error message - activation server is temporarily unavailable. tried rebooting, connect to iTunes - nothing works... Any help on this would be welcome.

  BTW... my iPhone6 and mini ipad updated very well...

• My activity tracker is stuck on weekly summary, help!

  Wednesday, I check my weekly summary activity on my Apple Watch and he has been stuck there since then. What should I do to get it back to my daily monitoring?

  Hello

  Scroll to the top of the summary and tap in the upper left corner of your screen. (There should be a link here, but even if it is not displayed, you can find this tapping, area of the screen always returns you to the face of the watch).

• Help! My Apple Watch is stuck on the screen of weekly activity

  Hello

  My Apple Watch is stuck on the screen of the weekly activity. I tried setting down, I tried the button dial spinning and nothing. There is no done either button. Do I let my Apple Watch lose all batteries, or is there a way to solve this problem!

  Hello

  There should be a link to the upper left corner of the screen.

  Even if you don't see (after verifying that you have reached the top of the summary page), try to tap into this area to exit Preview.