Stuck on site during the transformation tool!

Similar Questions

• How to limit the size of the transform tool box?

  I'm working on creating composite images, import of small picture elements that must be positioned, scale, distorted and sometimes inverted to match the lighting of the larger background image source. For example, import a picture of a car in an enlargement of the city - scape.

  Since these elements are quite low compared to the bottom layer, when I convert the layer element into a smart object, and then use the transformation tool, the bounding box is available to match the size of the large image in the background. The control points of the area of transformation, especially in Warp Mode, are often too far apart to be effective in this little piece of fine adjustment.

  Is there a technique I use to limit the processing area to cover simply the object I want to transform? Thank you.

  Rich

  It doesn't to me with a psd placed in an another psd as a smart object. What file format you place? Do you need to use the dynamic object, it does not really help if you resize the bitmap images (unless you go back from smallest to largest).

• I cannot using the transform tool.

  I watch a tutorial on how to make a target in photoshop. I use windows while the guy in the tutorial uses a mac so some shortcuts are the same under windows. Anyway, here's where I'm stuck. First of all, I made a circle with the selection and then inverted and filled Rectangle tool then the layer of white. I then reversed back again. I use the free transform tool and I scale down to make a circle and then fill it with white. I try to repeat the process rather than leave the image as it already is, he is constantly changing the circle that I've already been working, but I want to reduce a new circle, so I can fill that one. I hope thsis is sensible. I was able to do it correctly the first time, but for some reason, I can't produce the same result.

  Hello

  Make sure that the second circle you make should be on another layer, if the two circles will be on a single layer the reduction will affect the other.

  Thank you

• CC Illustrator crashes when I click on the transform tool

  Hi, did anyone know why this is happening or what I can do to fix this? I just started using illustrator CC and realize that when I have the button clcik Transform tool, the program crashes. It shappens even if no document is open.

  I use a mac with OS 10.7.

  Slinky,

  Try the following (you may have tried / some of them already) and see if that helps you (the following is a general list of things, you can try when the question is not in a file specific; 3) and 4) specifically may be corrupted preferences):

  (1) close Illy and open again.

  (2) restart the computer (you can do that up to 3 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) to move the folder with closed Illy (more tedious but also more thorough and reversible);

  ((5) browse and try the relevant among the other options (point 7) is a list of the usual suspects among other applications which can disturb and confuse Illy);

  Even worse, you can:

  (6) uninstall, run the cleanup tool and reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• MacBook stuck at startup during the update

  My version of the MacBook is OS X El Captain 10.11.3.last night, I downloaded the update to 10.11.6, after which the Mac has asked for a restart. But after reboot I just get a white screen with logo and a progress bar stuck at 0% of the hours.what last few must I do? If I stop my system and restart once again, all right, but this means that I should not install updates ever?

  Download the update Combo Apple of this site:

  Apple - Support - downloads

  https://support.Apple.com/downloads/MacOS

  This is a more complete installation, as opposed to a 'delta' incremental update, so he must crush all the system files that are damaged or missing. It does not matter if you have previously applied.  He doesn't have to touch everything inside your file.

  EDIT: I also do the installation in Mode safe:

  Start in Safe Mode and see if the problem persists? This will allow to test if the problem is in your user or system.

  Restart now ' shift '.

  (Wait to take more time to start in this way because it runs a check of directory first. Also give it some time after the start because he runs maintenance routines at the beginning).

• How can I get rid of this? Usually it doesn't appear when I use the transformation tool

  : https://gyazo.com/d5f9cd05552058e10225817b2eb8a1c2

  Uncheck the box "Show transform controls", which appears when you select the selection tool.

• The transform tool disabled selection control

  I don't know what the problem is with the setting, when I use the tool selection and clicked on an object, the transformation control does not show and I can't to scale or rotate the object with the selection tool. How can I activate the control of the transformation of the selection again tool?

  We did shift-cmd (control) b key and cut the framework encompassing? Try that key combination and see if it solves things, or go to the view menu > show the rectangle enclosing. If the menu says hide Bounding Box is a different problem.

  Peter

• Ignore the size of a stroke during the transformation of an object

  Why, suddenly, changing the stroke on an object changes the dimensions of the object in the processing window? If I draw a carrΘ, 100 x pt 100 pt with no line, the transformation panel says it's 100 x 100 pt pt. If I add a stroke of 1 pt around the place, Transform said now that the object is 102 x 102 points pt (assuming that I said to draw the line outside of the object).

  
  

  Illustrator did not that above all this week. I accidentally changed a parameter? Is this one of the Adobe without end useless 'improvements '?

  
  

  I don't want it to do this. I want it to ignore the size of the race when you move an object or view the dimensions of an object.

  
  

  P.S. Don't tell me that illustrator always behaved this way. There can be no.

  
  

  Particularities: Illustrator Mac OS 10.10.3 CC 2015.

  
  

  Thank you.

  You can toggle the option use an extract from the limits in the General preferences or in the drop of the alignment pallet.

• Error "we couldn't you log out of these sites ' during the signature on Hotmail.

  Original title:

  When I try to log out of my Hotmail account, I get the message: "we could not connect our of these sites - x 'Hotmail'"

  He told me I was disconnected from Windows Live, but not tht hotmail.

  I am using Microsoft Windows XP Professional Version 2002, and this message only began to appear in about the last 8 weeks I think.

  I tried the on-screen advice in tools, Internet Options: Advanced Tab - Reset: Remove personal settings: Reset. Close. Then restarted it is to say that these changes are taken into account.  Nothing has changed.

  Then followed more detailed advice to "Optimise my browser", I did... still no change.

  Hello

  1. is this problem only Hotmail?

  You can check the link below:

  http://www.windowslivehelp.com/thread.aspx?PostID=ec5de13e-72fa-495e-a6e3-1018ccd0c6fb#ec5de13e-72fa-495e-a6e3-1018ccd0c6fb

  If this is not enough, I would say that you post your query to Hotmail support.

  http://windowslivehelp.com/product.aspx?ProductID=1

  Hope this information helps.

• Diversion of Web site during the validation of my window Vista

  I tried to validate my windows vista Home premium through the URL http://www.microsoft.com/genuine/validate/validatenow.aspx?displaylang=en

  several times, but was redirected to the site http://search.microsoft.com/?mkt=en-sg

  I contacted the service center and support the customer to 8008523543 for that matter but very disappointed

  to receive the answer as why should I validate my software? They don't know what are the benefits of using genuine software?

  I have also posted this question on the looks of communities but gave a link telling me to download a tool to validate

  the software. I am holder than genuine software for you and why can't validate the site given by your technical support service

  staff. Also, when I type www.ap.dell.com, the Web page was redirecting to www1.ap.dell.com using IE 7 and 8 respectively.

  I'm so disappointed to know that this Web page was created on server belong to Singapore and the data provider

  comes from my ISP Starhub. I just hope that microsoft could provide a good explanation on the Singapore networking works. I'm rather confused how to www1 www Web site. This is the website of true, or some raw cyber trying to block my access on getting my valid windows?

  Please advice. Thank you.

  Hello

  This article explains all the possible ways to activate Windows Vista: http://support.microsoft.com/kb/940315

  I suggest you call to the number indicated in the article to activate the copy of Vista.

  Hope this information is helpful

• Shows white stripe on the right side of the site during the auto-scroll down

  Hello

  A white stripe appears on the right edge of the site after clicking on a menu header and the site scrolls automatically downwards for this article. This problem can be connected to breakpoints. White wide stripe varies and becomes gradually wider during auto-scroll and push the left side of the site out of sight. The white stripe appears only in the intermediate stopping points. No problem under 568px browser width and no problem on 1000px. Manual scrolling does not show this problem however if you scroll the white band on the left will appear and scroll to the right and the band disappears. The Panel title of site is not affected by this problem.

  Site link: home

  I looked at:

  Delete extra spaces in web pages

  I think I have all of these suggestions covered. I can't find all the items outside the work area. I have 3 forms of party and card but they are all two well away from the edges.

  Image attached - help appreciated!

  Hello

  Looks like I solved my problem. When I said I don't think that anything has outside of the work of site - I lied! I discovered from the areas of transparent image for a couple of dialogue bubble SVG went outside of the web page, although the images of the bubble were well within the page. Adjust the box while they were a fit tighter around the bubbles and the problem seems to be resolved.

• Is it possible to tell Dreamweaver corresponding to the root of the site during the use of MVC?

  So I've been using Dreamweaver for awhile now and one thing really bugged me and I can't find a solution for it,

  So I work a lot with the MVC architecture as well as much of my code is outside the directory public html, so is possible that I seems to have been unable to find to tell him that the web_root is different from the root of the files for example

  somedir /-root for all my code
  somedir/public_html - the web root apache

  The short answer is no.

  I don't know what a valid solution. The last time I had a go at Yii, I did the root directory somedir. It worked well.

  Thinking out loud, you have two sites, one with somedir directory as root to develop outside the public directory files, other like public_html directory as root to develop the public site part. You can always link to files outside of the public directory, I have not tried it so don't know if it will work.

• Empty space that surrounds a layer by using the transform tool

  Hello, I met a strange thing in Photoshop, which is probably start my fault, but I am struggling to find a solution. Basically, I have a layer, and when I want to convert/resize, there, there is always a box with an empty space around him. I tried a lot of things trying to get rid of the box and just being able to select directly around the object in the layer, but not luck.

  Someone at - it solutions?

  Thank you

  

  That is to say that the layer contained out in regards to the handles.  There is no need to be a single pixel to 1% opacity, and free transform it will include.  The solution is to make a loose selection around the central object > reverse selection > and delete.

• Windows 8 stuck at 82% during the installation of the store.

  Okay, so I have a HP Touchsmart 300. Initially, it came with Windows 7 but was "upgraded" to Windows 8 through this class who gave it to me for $15 as.

  That being said, the system was on the first installation of the factory, updated with the software factory still in tact. When I tried initially upgrade to Windows 8.1 on the Microsoft Store, the update failed and crashed my PC to an unrecoverable state. I couldn't use the disc of Windows 8 (I bought it) or the system restore to get it back. The system disk however allowed me to "refresh Windows.
  A copy that is properly refreshed Windows, I tried to upgrade again through the store. This time, he got 82% on 'install' and more never moved (was on 82% for about 6 hours). There is no USB device attached besides the keyboard wireless receiver and none of the options mentioned in the bios occurs.
  As it is even Windows 8 without upgrading to 8.1 has become unstable since the last attempt. Constantly, it crashes and tells me it stop unexpectedly and must recover.
  I don't know if this thing of 82% is a time important, although I was very surprised to discover others seem to freeze at the same exact part.
  Not sure if this can help, I'm a computer technician (over 18 years) and I ran diagnostics on the hard drive, ram, etc. This machine has been fully functional for the last almost 2 years before attempting to install 8.1. 7 to 8 upgrade went smooth with only a few pieces of software that needed to be reinstalled or removed. This system is not broke down never before attempting installation 8.1.
  I'm a computer technician experienced 18 years, I have diagnosed about every piece of hardware and the system apart from this question is perfectly healthy. Even the current copy of Windows 8 has no problem.

  I had a similar problem on a laptop asus, I solved this problem by going to DeviceManager and uninstall my bluetooth device then try once again and once that he had instructed to reinstall my bluetooth device

• x 230 battery stuck at 99% during the battery reset

  The other day I was with my x 230 on Sanyo 9-cell battery, and level fell sharply by 40% to 6%, so I decided to do a battery gauge resetting.

  The load has been slain at 99% for a couple of hours now and I'm afraid that it will never reach 100% reset moves to phase 2, where it does the battery.

  I've noticed before that the battery never went beyond 99%, but it seemed to be a minor detail, but in order to reset the battery indicator, it seems essential that he reached 100%.

  Any ideas on that? Should I leave the reset running feature in hope he knows what he's doing?

  How many hours can take from 99% to 100%?

  Thank you

  Vicentiu

  Finally started to unload... I guess that I did not wait long enough.