Windows 8 stuck at 82% during the installation of the store.
Okay, so I have a HP Touchsmart 300. Initially, it came with Windows 7 but was "upgraded" to Windows 8 through this class who gave it to me for $15 as.
I had a similar problem on a laptop asus, I solved this problem by going to DeviceManager and uninstall my bluetooth device then try once again and once that he had instructed to reinstall my bluetooth device
Tags: Windows
Similar Questions
-
Are windows puts an administrator account during the installation?
Are windows puts an administrator account during the installation? I'm the only admin user on windows, but I can't do much like I said I need admin which remove, access or open the files.
I use windows 7
Original title: Admin account
You must be an administrator, because the first account you create during Setup must be an administrator-level account. There is also a built-in account (with a current name 'administrator'), but it is disabled, unless you are in Safe Mode (restart hold F8 for safe mode). As soon as the integrated, you can sign in and upgrade your real account on a daily basis at the level of administrator control panel.
Note: even if you are an administrator, some processes will ask confirmation continue. This is recommended because it prevents the virus of piracy of your profile and using your account.
-
Original title: OEM Windows XP Home SP3 update XP Pro
Here is a compilation of the messages from another forum regarding
My problem:
---------------------------------------------------------------I'm trying to upgrade a Windows XP Home Sp3 OEM system to
Windows XP Pro. (There are a few Pro features
that are not available in the House I now need: (1) the files offline and
(2) an add-on available for free to Onenote 2007, Top2onenote, requires a Pro).
I don't want a clean install, but an upgrade. I bought a Windows XP Pro
Upgrade CD on Ebay that was Windows XP Pro
Gold (v2002). I'm sure that's true for the following reasons:It has been listed as an upgrade, but the CD is not labeled "Upgrade".
It seems very authentic with all Microsoft holography.
He came in the standard package of Windows XP (without box),
and it was sealed.
The name of volume for the CD is WXPFPP_EN. The Internet,.
It is the retail of Windows XP Pro RTM (gold)!Here are things I tried initially.
(1) I tried to upgrade to Pro from the purchased CD. It is immediately
has refused to upgrade indicating the upgrade OS (Pro) is older than the
installed OS (home)...(2) I read about "slipstreaming". "Slipstreaming" allows to integrate
a service pack with an earlier version of the operating system. I created a
upgrade XP Pro SP3 with Nlite slipstreamed CD image (and
Autostreamer later, but it made no difference) from the purchased CD
and a file containing SP3.After you burn the CD and start the upgrade
(Windows installation), the upgrade process
product through "information collection."
"Dynamic update" and "Preparation of Installation" with
no problems. My computer restarted and returned to
"Installation preparation". A progress bar called 'Progress '.
quickly filled to about 90% and the hanging system
at that time there for about 15 minutes.
Then, I got the following error message:Setup cannot set the required Windows XP configuration
information. This indicates an internal Setup error.This is where I am stuck. I had to leave the installation at this point.
My drive is starts raining and I had to restore a backup.(3) just for the heck of it, I formatted my hard drive and
reinstalled my original OEM XP Home SP3 OS (no clean up, no user file).
I immediately used my XP CD slipstreamed Pro to try one
upgrade to XP Pro and IT WORKED! I need to find out why the
properly clean XP Home OS upgraded to XP Pro but my pre-existing
(with the files users, drivers, etc..) XP Home OS does not level
successfully to XP Pro.
-------------------------------------------------------------Another post:
Yet once, today, I installed a new copy of OEM Windows XP Home Sp3.
I continue with installation of all the essential and the add-on
pilots (essentially all my original version). Then, I
set up a network connection and firewall. With this configuration,.
I ran the Pro XP slipstreamed SP3 CD. The upgrade to XP Pro
success (even if the upgrade not configured my graphics
card properly). I guess my current problem is either the registry,
the WINDOWS, some user file or parameter file.
---------------------------------------------------------------Another post:
I made a file and the backup of the folder C:\Windows folder
on my system that is pre-existing (OEM XP Home Sp3). I also did a
separate the backup the State of the 'system' on my pre-existing system.
These are added my full image backup of her pre-existing
system a month ago.I did a backup image of my system (minimum fees OEM XP Home
SP3 with all the original installed drivers over a network configured
connection and a firewall configured). This system will upgrade
XP Pro with XP Pro SP3 slipstreamed CD successfully.Experiment 1:
I've restored my minimum system. I then restored the C:/Windows folder
and the State of the pre-existing system backup system. A startup
has managed (with a minor irritant). I had to activate Windows.
Then, I tried upgrading the slipstreamed XP Pro processor. He stopped
at the same place during the upgrade and gave the same error as before:Setup cannot set the required configuration information Windows XP.
This indicates an internal Setup error.Experiment 2:
I've restored my minimum system. I then restored the system state only
the backup of the pre-existing system. After startup I was asked to
activate Windows, but answer Yes to the question would be to disconnect me
the system. I couldn't get connected to try the XP Pro upgrade.Experience 3:
I've restored my minimum system. I then restored only the C:/Windows
the backup of the pre-existing system folder. Once again, as in experiment 1,
the upgrade failed at the same place with the same error message.----------------------------------------------------------------
Before the experiment 3, I hoped that 3 experience would succeed so I
could conclude that I had a registry problem. I'm not sure now.
I don't know what to try next. Take the minimum system and reinstalling
my files of the user is not an option that my hard drive has over 200 GB of
programs! If I restore all files and folders of my pre-existing
I would still have backup to restore a system state the reliable (read the registry).
---------------------------------------------------------------------Sorry for the length! If anyone has any ideas I would appreciate your responses.
Thank you
Hello
This problem can occur if a piece of hardware that is installed on your computer is not compatible with Windows XP.
For more information, see this link:
Error message: Setup cannot set the required Windows XP Configuration information
Hope the helps of information.
-
I'm trying to install Acrobat 8 Standard on a PC with Windows 7, 64 bit. During installation, you asked me to provide 'File PDF.dll Adobe for Windows Vista'. How can I get the required file?
Hi Alan Horan.
This link appears corresponding to your query, please visit this link ( error "the file AdobePDF.dll is needed" |) CS3 | 64 - bit Windows ) and let me know if you face any problem.
Kind regards
Rahul Tyagi -
Windows 10 gives an error during the startup screen
New installation of Windows on a laptop Lenovo B50 10 - 30, all drivers updated.
Adobe Photoshop Lightroom 6 installation ends without errors, but when I run Lightroom an error message appears during the boot screen, saying: «Adobe Photoshop Lightroom 6 stopped working...» ». The only option at this point is to close the application.
What should do? Thank you!
The failing application path: C:\Program Files\Adobe\Adobe Lightroom\lightroom.exe
Path of the failing module: C:\WINDOWS\SYSTEM32\ig7icd64.dll
Report ID: cceda8ca-0de5-48b0-95d3-5d2aed59f4a6
Cause of the crash is your graph card C:\WINDOWS\SYSTEM32\ig7icd64. DLL
Update your graphics card as one of its defective module crashes Lightroom
To confirm this:-open Device Manager > display adapters > right click on your graphics card
Select Disable
Starting Lightroom
Let us know if this helps
Assani
-
MacBook stuck at startup during the update
My version of the MacBook is OS X El Captain 10.11.3.last night, I downloaded the update to 10.11.6, after which the Mac has asked for a restart. But after reboot I just get a white screen with logo and a progress bar stuck at 0% of the hours.what last few must I do? If I stop my system and restart once again, all right, but this means that I should not install updates ever?
Download the update Combo Apple of this site:
Apple - Support - downloads
https://support.Apple.com/downloads/MacOS
This is a more complete installation, as opposed to a 'delta' incremental update, so he must crush all the system files that are damaged or missing. It does not matter if you have previously applied. He doesn't have to touch everything inside your file.
EDIT: I also do the installation in Mode safe:
Start in Safe Mode and see if the problem persists? This will allow to test if the problem is in your user or system.
Restart now ' shift '.
(Wait to take more time to start in this way because it runs a check of directory first. Also give it some time after the start because he runs maintenance routines at the beginning).
-
Firefox window gets stuck in the same place. I can re-size, I can go full-screen (or back), but the main, when 'magnified' flat 2 cm below the main toolbar. I can't do seem to 'take off' it. It is also in the main window, but I can drag the other windows on it. Essentially, this does not in my view.
I just corrected it. the title bar should be turned on? Is by default 'off' and why? I go to display/Toobars/customize. The response time for clicks grew by at least 2 x the latest version. Now, I have no footer for my apps bar, maybe I'll find that, too?
Hi mrbonine,
Yes it's elements has changed in the new Firefox 29. You can custom the foot of page by adding an add on bar or space at the bottom of the menu in the menu customize you forwards. Bar Add on -
I have my computer to another, here my specs:
Intel Core 2 DuoHard drive 500 GB2 GB OF RAMDVD playerFloppy DiskThe operating system that is running Genuine Windows XP Professional Service Pack 3 and just upgraded Windows 7 (but I know before upgrading Windows 7) and keep the blue screen / Crash when upgrading to Windows 7. but the upgrade Windows XP to Windows Vista is not blue screen/crash during the upgrade.Is anyone to upgrade from earlier version of Windows to Windows 7 without crashing and spending fortune?Hello
1 did you change on your computer before this problem?
2. What is the blue stop screen error message?
3. When you receive a blue screen during the upgrade?
You can follow the suggestions and then check.
Method 1
Disconnect external devices connected to the computer?
Method 2
You can read the article and then check.
Upgrade Windows XP to Windows 7
http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7
See also:
Windows 7 Upgrade and Migration Guide
http://TechNet.Microsoft.com/en-us/library/dd446674 (v = ws.10) .aspx
-
I am connected to my administrator account and trying to download the new Windows 8.1 but when I go to the store to download, which is also signed on my Microsoft account, he pushes me with an error saying that I must be an administrator to complete the operation. I shut down the computer and logged on. Also, I lowered my UAC setting and retried still no luck. I thought about it and tripped by preferences but have had no luck. Any suggestions...?
Marissa
Former title : administrator account
Hi Marissa,
Thanks for posting your query on the Microsoft Community Forum and I can understand the level of frustration through which you leave.
I would be grateful if you can provide us with the following information to help us better understand the issue.
- All other updates installed on your computer?
- (KB2919442) update is installed on your computer?
- Are other features of this new update work well like minimizing the window, the button / stop etc.?
8.1 update Windows (KB2919355) is an important update of Windows include improvements that will facilitate your favorite applications and settings to find and use, and offer more familiar mouse and keyboard options.
There are a few prerequisites for this update must be installed:
- Before installing update 8.1 for Windows (KB2919355) Please make sure that KB2919442 is installed.
KB2919442 is the sine qua non of 8.1 to Windows Update.
For more information, please see the Microsoft Article.
Battery service made available for Windows RT 8.1 8.1 of Windows and Windows Server R2 2012: March 2014.
http://support.Microsoft.com/kb/2919442/en-us- Temporarily disable the security software during the installation of Windows Update 8.1 to avoid conflict situations.
Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.
You can check the link below for the updates are installed on your computer.
Windows Update: frequently asked Questions
http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ
If it helps, try the methods and see them below.
Method 1:
I suggest you to run the Windows Update Troubleshooter:
Problems with installing updates
http://Windows.Microsoft.com/en-in/Windows/troubleshoot-problems-installing-updates#1TC=Windows-8
Restart the computer once after running the troubleshooter. Check to see if that fixes the problem.
Method 2:
If the problem persists, I suggest you run clean boot.
Make your system clean boot State helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.
How to perform a clean boot in Windows
http://support.Microsoft.com/kb/929135/en-us
Note: refer to "How to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.
Additional information:
For more information on this update, you can refer to the Microsoft article.
Install the latest update of Windows 8.1
http://Windows.Microsoft.com/en-us/Windows-8/install-latest-update-Windows-8-1
Hope it would help. If the problem still persists, post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.
Thank you.
-
Original title: when I go to install Windows 10 the blue window appears and then nothing
When I update my system to Windows 7 home premium Windows 10 blue box appears and then noting. I tried Windows update troubleshooting and RC Datastore error code 0 x 80070057. Any help with this would be great. Thank you
Hello
Thanks for posting your query in Microsoft Community.
I understand you are trying to install Windows 10 and nothing happens and I'll be happy to answer your query. I appreciate your efforts to try to solve your problem and help you with the following additional steps that will help you diagnose and fix the problem.
Method 1: Error code 0 x 80070057, thank you suggest follow the steps described in the following link and check if the problem persists.
Difficulty errors Windows Update corruption as 0 x 80070002 and 0 x 80070057
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows
Method 2: If method 1 does not work, try to follow all the steps in the following link and get the fixed number. These steps also include when you rename a file, called pending. XML as a method 11, which will prevent your system from the error: «failed to Setup updates windows.» Changes in return ".
Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
Note: Please restart all the Windows update services that were stopped during the troubleshooting as indicated in the link above.
Try the following steps and after return your results for further assistance, we will be happy to help you.
-
When I go to the Store tile in Windows 8, I was happy to see the "upgrading to Windows 8.1 free". I read about this free update, but it has never been available for me so far.
However, when I click on download, it gives me an error saying: "you must use an account with administrator privileges. I'm an admin on the machine (for example I can run a command as administrator prompt without giving any creds). So I am confused on how to proceed.
Any suggestions are appreciated.
-Marie Sissi
Hello
Try to uninstall Windows Update KB2871389, then put it back.
If this does not help, I read recently that this Fix - It might help...
-
When the update of Windows XP is install SP3, the sequence is abandoned at the location of the process. After you download the SP3, the progresses set install through the normal initialization sequence, inspection, creating list of 3rd drive part, backup files, etc., begins to install the files but when to reach the "UNIDRV. The installation of the file "DLL" stops and I get a message "the system cannot find the file specified". The close message will invalidate all the installation and possible automatic restart. I did not locate a UNIDRV. DLL file and copy it to my C:\ root directory but have tried almost everything in the 22/01/12 'terribrownQF' and the response "Tommy Stanley" 22/01/12 no change where the installation of SP3 crashes. Should I try to put the UNIDRV. DLL file on my computer? Any other ideas?
Please respond to each of the following diagnostic questions in a numbered list type in your very next answer (no need to quote this post):
1. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires? What (other than Defender) anti-spyware applications are installed? What third-party firewall (if applicable)?
2 a Norton or McAfee application ALREADY installed on the computer?
3. do you have a free trial Norton or a test of free McAfee [CHOOSE ONE ANSWER] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).
4. why has not been installed SP3 years? [1]
5. is Firefox, Chrome or any other alternative browser installed?
6. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. Advanced System Optimizer. CCleaner)?
7 have you ever had the opportunity to do a repair install or clean install of Windows XP for some reason any?
=====================================================================
[1] note: support for WinXP SP2 ended the July 13, 2010! "Computers running WinXP SP2" will no longer receive software updates from Windows Update "[i.e., updated on and after August 2, 2010 so now that you're missing more than two years worth of updates to security critical! ] until SP3 has been installed. -
I had windows 7 in dual mode (both). then I tried to install xp formatting a Windows 7. but after copying the files, when it tries to start xp, this error appears and Setup stops.
NOTE: my other version of 7 is also not starting because this error comes when I start computer.
I tried
http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-update/Windows-rootsystem32ntoskrnlexe-is-corrupt-or/3e03d6f9-c8e4-49e7-8cbc-152d82c7c839
but no help!
Check the XP CD is clean and Unscratched. If necessary, wash and dry with a soft cloth. Do a full format of its installed on the booted XP disk partition.
After installation (or if it fails), you'll need to start Windows 7 again by Marking Partition Active in XP Disk Mgmt, or by using the Windows 7 disc or repair as shown in the blue link tutorial CD. If there is a 100 MB system reserved partition then it should be marked Active, another partition of Windows 7. Then boot in WIndows 7 disk or repair CD to run Startup Repair up to 3 times separated until Windows 7 starts.
Then, install EasyBCD (click on Download - no name or Email required) to add XP to a Dual Boot menu by name and OS from Windows 7 drive letter.
-
before installing an upgrade to windows 7 ultimate windows 10. my version of windows has been activated and genuine. but due to an error when installing windows 10, blue screen appeared and my pc was recovered back to the previous version which is windows 7 ultimate but now its true this is not enabled and im nt able to upgrade to windows 10 as well...
in the system properties it says 3 days to go to automatic activation I waited for 3 daysbut it said another 26 days to automatic activation.
What does that mean?
How can I solve this problem?To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool
(download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
Once saved, run the tool.
Click on the button continue, which will produce the report.
To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.x
-in your own thread, please
Please also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!
-
Gateway Windows 7: stop blue screen during the installation of Windows 7: 0 x 00000024
OK, I've had so many problems with this computer and I would love to have the support of the community.
I have a Gateway desktop that is labeled for Windows vista. I had already installed Windows but a virus brought me to uninstall. I don't have the disc, but I have a flash drive with windows 7 on it. So I have my computer to run the player flash start run the windows setup program. I get to the part after the selection of my hard drive. It comes down to 50-60% full, and then it stops at a blue screen with stop code error 0 x 00000024 (0x0000000000190FB 0XFFFFF88003B8C269 0XFFFFF88003BAC0 0XFFFFF8000D292FOD) I have searched and searched for a solution but none to my knowledge, I am only 16 and very bad so I can not affored a new computer, or a repair of $75. Please when replying to this is so simple and stright forward. Thanks a lot for taking time outta your day to help me.Pearen
These were related to the Extensible Atheros athr.sys wireless device driver. I would re - install newer and updated the drivers listed below and updated to update to Service Pack 1
Run (SURT) system update readiness tool and then update to Service Pack 132 bit
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=3132
64 bit
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=20858Now updated for Service Pack 1
http://Windows.Microsoft.com/installwindows7sp1Learn how to install Windows 7 Service Pack 1 (SP1) http://windows.microsoft.com/en-US/windows7/learn-how-to-install-windows-7-service-pack-1-sp1
Additional resources:
http://Windows.Microsoft.com/en-us/Windows7/uninstall-SP1
http://Windows.Microsoft.com/troubleshootwindows7sp1Older drivers who need to update your driver of athr.sys which is 3 years old inclusive
SCDEmu.SYS Mon Jul 7 03:40:49 2008 (4871-881)
PowerISO Virtual Drive driver
http://www.carrona.org/drivers/driver.php?id=SCDEmu.sys
VSTCNXT3. SYS Wed 15 Oct 20:29:13 2008 (48F68AD9)
Conexant SoftK56 Modem driver
http://www.carrona.org/drivers/driver.php?id=VSTCNXT3.sys
VSTAZL3. SYS Wed 15 Oct 20:30:03 2008 (48F68B0B)
Conexant SoftK56 modem
http://www.carrona.org/drivers/driver.php?id=VSTAZL3.sys
VSTDPV3. SYS Wed 15 Oct 20:32:04 2008 (48F68B84)
Conexant SoftK56 Modem driver
http://www.carrona.org/drivers/driver.php?id=VSTDPV3.sys
Rt86win7.sys Thu Feb 26 04:04:22 2009 (49A65B16)
Realtek NETWORK card
http://www.carrona.org/drivers/driver.php?id=Rt86win7.sys
amdxata.sys Tue May 19 13:57:35 2009 (4A12F30F)
AMD - usually from the Windows 7 DVD storage controller driver
http://www.carrona.org/drivers/driver.php?id=amdxata.sys
ATHR.sys kills Jun 9 14:04:52 2009 (4A2EA444)
Atheros Extensible Wireless LAN driver for network card CB42/CB43/MB42/MB43-D-Link AirPlus DWL-G520 Wireless PCI Adapter(rev.) (B) discontinued 2008
http://www.carrona.org/drivers/driver.php?id=ATHR.sysRun (SURT) system update readiness tool and then update to Service Pack 132 bit
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=3132
64 bit
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=20858Now updated for Service Pack 1
http://Windows.Microsoft.com/installwindows7sp1Learn how to install Windows 7 Service Pack 1 (SP1) http://windows.microsoft.com/en-US/windows7/learn-how-to-install-windows-7-service-pack-1-sp1
Additional resources:
http://Windows.Microsoft.com/en-us/Windows7/uninstall-SP1
http://Windows.Microsoft.com/troubleshootwindows7sp1BugCheck D1, {30, 2, 0, 902658a 5}
Probably caused by: athr.sys (athr + 428a 5)
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
BugCheck D1, {30, 2, 0, 918618a 5}
Probably caused by: athr.sys (athr + 428a 5)
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
BugCheck D1, {30, 2, 0, 94c448a5}
Probably caused by: athr.sys (athr + 428a 5)
Maybe you are looking for
-
Update of the airport &; MacBook Air
I've recently completed the update of the firmware for the Airport (version 7.6.7) express and now when I open my MacBook Air (13-inch, mid 2013 w/1.3 GHz Intel Core i5;) El Capitan 10.11.5; all updates are completed) to use the internet, there is no
-
IPad 3 starts to load up less 100%. When charge currently is only 8%. And when is on use only load is even lightning on. Called service Modernica PR Apple support and the store they don't fix diagnoses in the guarantee. Need a solution!
-
Why Tempro 3.3.3 "Installation ended prematurely because of an error"?
Hello Forum, I have a Satellite L500-1XD running windows 7 64 bit. I _had_ tempro 3.0 pre-installed when I bought first mar 10 satellite. for months, I ignored the tempro update requests to tempro 3.3.3; until today. so, I downloaded from [here | htt
-
Password BIOS after update BIOS on Satellite A210-131
I just bought this laptop and update its BIOS. After update done computer turns off automatically. Then I turn them on, it ask password, I've never given an any of them in the BIOS.What is the password?
-
El Capitan Help! I'm stuck on a screen with a bar oblique circle!
I have a MacBook Pro (2011) and I recently got my computer fixed with a new hard drive and this who do not. I went to install El Capitan only then as soon as it finished downloading, it just freezes and returns to a white screen with a slash through