Error recovery Windows (software/hardware change) - No restore points and no disc how to fix?

Similar Questions

• error recovery Windows returns constantly to the start without reason...

  Hi I recently got windows 7 Professional 64-bit my Thursday school last burn on a dvd. Everything seemed fine after installation, and such as Saturday when he starts in front of the screen of bio and then pop up with error recovery windows telling me that windows wasn't one to repair or start normally anyway would it continue to go to this windows error recovery screen bit whatever I chose. These events eventually led me to believe that my hard drive has failed in which I had a brand new only on Sunday and installed fine all appeared while Monday morning he started to blow upward with the same error message I could try the repairs say it was very good, try and boot and it would restart again. Fortunately I was able to install my Vista Edition home premium 64-bit, which seemed to be ok for most of the day until yesterday when it grew up the windows on error with the options to use the last configuration or start normally (due to the recent hardware or software changes, but I have not install anything new in terms of software or hardware) that works , but im not sure for how long. Im very tech savvy for my age and know what im doing with computers, but I can't seem to understand what is happening since it is a new player none of my hardware is a failure and I don't know.
  Appreciate any help...
  Colin

  Repair system solves most of the start-up problems.  Some computers have startup repair pre-installed otherwise you will need a CD/DVD of Windows Vista.   If your system still does not boot in Windows, follow these steps to repair the boot sector.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I turn on my blue screen laptop appear after windows error recovery windows also appear

  When I turn on my laptop, a blue screen appears after windows error recovery windows appear also... ask in safe mode are normal windows startup?... what I can do... is a problem on my system?... Please help me...

  Hello

  ·         What operating system is installed on the computer?

  ·         What are the error messages that are displayed on the blue screen?

  ·         Did you make any changes before the show?

  In the recovery menu, select Safe mode and check if you can connect?

  You can also try to restore the system in safe mode.

  If you are able to boot to the desktop in safe mode, then I suggest you put the computer to boot in safe mode and check if it helps:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Reference: resolution in Windows 7 stop errors (blue screen)

• Trying to system restore but impossible - error: no changes have been made to choose a different restore point and try again

  Windows vista system restore error: no changes have been made to choose a different restore point and try again. I did and got the same answer. dirtied with services before that, so why I did a restore. go to services and everything works again no luck.

  Hello

  1 Norton will interfere with system restore

  If using Norton, disable Norton Protection inviolable, use SR.

  2. try Safe Mode system restore:

  And here's how to go in Safe Mode options; select Safe Mode from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  3 malicious software stops the restoration of the work system to protect themselves from coming off.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Error code Windows Update 800700 B & System Restore 0x80071A91 error

  Cannot install critical system updates.  Download the update error 800700B.  Manually and through MS FixIt ran the command fsutil resource setautoreset to clear/clean line newspapers.  Has not fixed the problem.  Through research found related error on the system restore.  Am unable to create a restore point and 0x80071a91 error.  A run the command-line recommended by MS to address, cd /d %SystemRoot%\System32\SMI\Store\Machine
  attrib s h *.
  del *.blf
  del * .regtrans-ms

  and get an access error:
  C:\windows\system32\smi\store\machine\schema.dat{d3e605ee-4C71-11de-be3f-001d609310af}. TM.blf
  The process cannot access the file because it is being used by another process

  Any ideas?

  Currently no anit-virus software, but recently (within 2 months) not uninstalled Mcfee... I'll try to get more details from the owner about the software was previously installed Antivirus

  You don't have to bother. This is not good. :(

  See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista#section_3

  After the new installation, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network and before using a USB (flash drive) or the SD card that is not brand new, or has not been freshly formattedotherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application. [1]

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  ==============
  [1] I recommend Avira AntiVir & Microsoft Security Essentials (both free) and NOD32 & Kaspersky Anti-virus (not the "suites").

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I want to do "System Restore" in Windows Vista. But I can't change the restore point

  I want to do "System Restore" in Windows Vista. But I can't change the restore point. How to configure manual restore point? Can I enter a date I want to restore? I tried, but it did not work.

  Original title: in Windows vista system restore

  Hello

  Either the system restore point is already created for an earlier date, or is not available.

  You cannot create a restore today Point to return to yesterday.

  You can create a restore today Point to use in the future.

  Here's how to use the Vista system restore:

  http://bertk.MVPs.org/html/restoresysv.html

  See you soon.

• Diagnostics Windows network, the error reads 'Problem with wireless adapter or access point' and fails to solve the problem.

  «Problem with access point or wireless adapter»

  Hi, I just bought a new laptop & I have the extreme difficulty to stay connected to the internet. When I run Windows Network Diagnostics, error reads 'Problem with wireless adapter or access point' and fails to solve the problem. Help, please... Thank you, Maria

  HI Maria,

  ·         What operating system is installed on your computer?

  ·         You have installed the latest drivers for wireless network card?

  Follow the suggestions below for a possible solution:

  Method 1: Start your computer in a clean boot state in order to check if the applications of third parties or startup items is the origin of the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: See these articles for solve wireless problems:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if that helps.

• I am trying system restore and it says I have no restore points and will not let me create restore points

  help I am trying system restore and it says I have no restore points and will not let me create restore points
  * original title - find search indexing index reindex re-indexing research research research service troubleshooting troubleshooting *.

  Hello

  1. what exactly happens when you try to create a system restore point?

  2. you receive an error message when you create system restore point?

  3. what operating system is installed on the computer?

  In the event that you use the Windows 7 operating system you can follow the steps below and check if the problem persists.

  Method 1:

  Step 1:

  Locate the service associated with the restoration of the system or Volume Shadow Copy Service is started after the computer is restarted. This service can be stopped by some viruses as well, so you can try to run a scan of your computer.

  To check the service

  (a) click Start

  (b) in the start search box type Services

  (c) click on - RUN as ADMINISTRATOR

  Check if the below mentioned services has mentioned State and type start.

  Shadow copy volume started Automatic\Manual

  Step 2:

  Also check the dependency services that are required for the System Restore Service run.

  To verify that double-click the service, and click the Dependencies tab.

  This service must be started before the restore point is created automatically or manually.

   

  Method 2:

  Try disabling the firewall and windows temporarily on the computer security software and then try to create a system restore point and check if that helps.

  Follow the articles given below to change the settings for the firewall and security software settings

  Understanding Windows Firewall settings

  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-Firewall-settings

  Firewall: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note:

  If you are able to perform the system restore after you disable the security software then you may have to contact the software publisher for the security software by disabling the firewall and security software is a potential threat to the security of the system.

   

• error code Vista Defender 0x800160ba poping maintains and is off, how to fix

  Windows defender is disabled, the sp2 of vista running, keeps poping out of 0x800160ba error code and will not let me activate, how to fix?

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial:

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this FREE program Autoruns:

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• I looked under system restore points and the earlier it had was on March 27, which was still after that I got problems

  Good so my computer has some corrupted files... I looked under the system (Yes, including the section 5 days ago) restore points, and the earlier it had was on March 27, which was still after that I got problems... I want a later date... Help, please.

  Hello

  If there is no previous restore points until 27 March, including even more that 5 days more then they just do not exist

  and you can not do something which

  Follow these steps instead:

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• settings can continue to change for less bright display 20 minutes and never sleep, how to fix?

  settings can continue to change for less bright display 20 minutes and never sleep, how to fix? I took 1 hour, and it keeps changing back how to fix? I recently got a dynex keyboard and it has a sleep button I press the keyboard model number is DX-KBWM2.  How to fix?

  Hello Taperum,

  Thank you for the update on the question and sorry for a delayed response.

  If the problem still persists, there may be a chance that the problem is due to system files, so I suggest you to check the system files are they work very well or not and to check who are trying to run the (SFC) System File Checker tool.

  Scan SFC will be scans all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  • Go to Start, click all programs and open the Accessories.
  • Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.
  • In the command prompt, type the following command and press ENTER:

  sfc/scannow

  For more information, refer to this link:

  http://support.Microsoft.com/kb/929833/en-us

  Get back to us with the result of the analysis so that we can offer you additional troubleshooting steps.

  Kind regards.

• Why Illustrator change my anchor points and size race randomly when I'm using the tool pen?

  Why Illustrator change my anchor points and size race randomly when I'm using the tool pen?

  k,

  It looks like you might be haunted by the Align attribute to the ghost of the pixel grid.

  You can select the entire document and untick finally align on the pixel grid in the Transform palette and uncheck also align new objects to the pixel grid in the options of the Launcher. It is crucial that the checkbox is disabled completely, not just a - which also count as ticked.

  It may be noted that even align with the pixel grid is cleared with all the selected objects, align new objects to the pixel grid is checked as the creation of new objects will result in these new objects being aligned, even when they are created from existing objects that can happen with Pathfinder operations.

  You can avoid the types of documents with the default (RGB for the web and other) or change the default value for such documents.

  Here is a screenshot of exquisite made per ton in the first post:

  https://forums.Adobe.com/message/7841770#7841770

• Computer does not start, the Error Recovery window is continuous

  Yesterday, I upgraded to a software called Turbo Lister for eBay.  The computer must restart for the changes to take effect.  It's the start of my problem.  After the reboot, I got Windows Error Recovery screen.  He recommends launch Startup Recovery or start Windows normally.  I tried both and keeps it just goes back to the screen even as a loop.  I tried to boot in safe mode does not work.  I have inserted the reinstallation cd and run Startup Repair and that has not worked.  Help, please!  Is that what I can do about it or he needs to see a professional?

  Hello

  You can try these since the Windows CD/DVD

  1. the system back restore to before that has happened

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  2 SFC and CheckDisk from the Windows disk command prompt

  SFC/scannow

  RE-RUN the disk

  Chkdsk /f /r

  RE-RUN the disk

  then try Startup Repair.

  (there is space after C and before / k and this before / f and before /)

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Error recovery Windows after Vista MS updates - Acer

  I have an Acer Aspire T180 - two years, has been my daughters.  We have provided factory to use ourselves and have been running for about a week.  Automatic updates recommended upgrade Vista to Service Pack (I don't remember if 1 or 2 and now impossible to verify).  All seemed well, we used the computer after the upgrade with no problems.  However, after the stop for the night and put on the next morning (yesterday), we now have a blue screen with an error of Windows recovery.  Auto repair does not work and start normally does not work, and those are the only 2 options.  I don't have the disk to reinstall what... should I just reset factory again and then make sure I have create a recovery/backup disk once we are up?

  Hello

  If you just put it to standatrds of the factory before this happened that the easiest would be to do it once again, as you suggest

  and make the disks of backup system in the event of a hard drive failure

  as soon as he is running again, you will see an Acer toolbar to the top of the screen

  one of these icons in must click on it to start to make the records of recovery to reinstall vista again, if necessary

  If you wish you can make this start repair disk and try to fix it:

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and for later use, here's how backup data in vista

  These methods depending on your version of vista

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc (Vista, full and professional company)

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

• Error recovery Windows on Equium A210

  I have a series of A210 running Vista. When you turn on the laptop, I get "Windows recovery error. I then get two options 'Launch start repair' or 'Start windows normally', if I select 'Launch Startup Repair' I get a message: "system recovery options. Cannot start the installed program. Click OK to turn off the computer "by selecting"Start windows normally"round loop"Windows error recovery"message."

  This message appeared without any previous problems with the laptop or Vista.

  Any ideas on how I'll be back to normal use?

  Hmmm don't look good buddy.
  According to your message, you are not able to boot in Vista or using of the * "Launch Start up repair" * or * "Start windows normally" * procedure

  Unfortunately, I put t see any other possibility as to take the disk recovery and recovery of the laptop.

  It looks like a serious system problem that can be solved only by using the recovery disc and reinstall new OS.
  But note; the recovery disc formats the drive HARD integer for you will lose all data :(