I have a Sansa Clip 4 GB. I have about 200 songs in the music file and had several, I added using Rhapsody. When I start my camera it goes through the procedure to update the database, but the progress bar is "frozen" under the "refresh and will not continue."
I have reset the unit (getting up on the bar of power for 15-20 sec) several times.
I've updated the firmware using the instructions on this forum
I removed all the songs from Rhapsody by removing them from this library while my camera was plugged
I ran a checkdisk to fix any corrupt files
It does not always refresh data operation. I started again just before this announcement, I started. It has been more than two minutes and it has not yet moved.
I can't go into the options menu on the device, I can't do anything with it not connected to a computer.
How can I get this unit to play music?
Format the device from the computer. Then go to settings > format > select Yes in the deivce.
Have a new Sansa Clib 4 GB... Spend 2 hours sorting of a list of synchronization... (Who has no record on a playlist... )
Put on I "Refresh database" at about 20%, which is frozen right there...
I've read about the opening in MSC? to find the bad file which is the cause (correct me if I'm wrong)
But can't figure out how to do something that he is stuck on the refresh database...
Through 60 GB of music earlier and really don't want what should once again!
Please help, not very good techno animal
Thank you
PAM
Go into the menu settings of clips and then use the system settings internal to format the drive (sorry it will delete all the music on the player). Once that is completed, make sure that you have the latest firmwire. Then download mp3tag (google it) and use it to check the tags of all your files, make sure that they are all Id3 tags, and that there is no mistake on any of them (sorry, this can take some time). Then, make sure that the clip is in MSC mode. Then use windows Explorer to drag and drop the files you want onto the clip on the clip. Disconnect and then turn it on. Leave it to update the database (do not touch anything). If you have music you know to be protected DRM you will need to plug the "rocket" back in and use Windows Media or any other similar program to add these files. I hope this gets you going.
my brother gave me his used sensa, and I downloaded many songs I could, so I expected to take a long time the database 'Refresh '. screen, but I had all night, and it has not yet disappeared now. so Basically, its actualization is rest on the database for several days... I need help with that, I can turn it off and turn it on, but it remains on the update the database I searched on the internet and the faq, but nothing helped, so I have no idea what to do
I even tried to use the thing, what he told me to download, but it does not work because my mp3player connects to the computer.
Help, please
found the solution on the web, just had to search on google, I think it's working now, I hope it explodes now<>
This problem could be caused by file corruption or errors of system on the device.
We should be able to fix your drive. Unplug the drive from the computer when it is connected.
Please copy and paste the following link in your browser of web address bar, and then click OK or press your enter key. When you are prompted, choose the option to save the file on your desktop.
Once you have downloaded the file, please follow these instructions.
(1) double click on 'My Computer' so that you can see on your screen.
(2) turn off the player.
(3) on top of the player is a Hold switch, move it to the right (toward the headphone jack) so you see Orange.
(4) on the left hand side of the player is a 'Save' button, press and hold it when you connect the player to the computer. Continue to hold the record button until you see a new icon in "My computer" called 16 MB FORMAT. Once you see this icon, you can release the record button.
5) double-click the file you downloaded earlier and run it. Follow all the on-screen instructions and when you get to the prompt where it asks you if you want to format, click Yes. Once this is done, click Finish.
(6) disconnect the player and watch the screen. Several things will be displayed, and when you see Key Lock, system shutdown, move the Hold switch on the back upstairs to the left.
(7) turn on the player and watch the screen. If you see a mistake to refresh database fail, you will need to follow steps 1 through 7 again until you do not get the error. If it doesn't work the first time, can be up to 3 times to make it work.
Please inform about the results.
If you have any other questions and concerns please let us know, it is our pleasure to help you.
Best regards Kenneth Arthur v. SanDisk technical support
My son tried to add a few new songs, but for some reason any that it got stuck on "a refresh database" no matter what we tried, I couldn't get out of this. Then we tried the update of the firmware auto it wouldn't recognize the drive because he was in mtp mode?
There is no way to change because you cannot access the GUI of the player. We started the sansa with hold/lock on and pushing the rewind button or what ever that is. And then we can connect and firmware has been added. He said to unplug the usb cord so he can take place and we did it he went immediately to the "the progress screen firmware update" I kept check on this subject and he stayed there for hours I let go until the battery ran out. I have rehooked the usb cable to the device to it turned on and it still says the current firmware update and is stuck there. It's the e250 V2 he says only he back that we connected using mac and linux windows. No idea how to solve this problem?
That's what I did that worked. I turned it maintenance/lock held the central button and inserted the usb cord. Once windows recognizes the device I went to my computer and the root directory entry of the I DELETED MTABLE. SYS once it has been deleted, I turned off immediately and turn it back on. When she came back on the updated database and I could connect normally. I dropped the new firmware in the directory root disconnected the cable and it said the upgrade of firmware and then accepted said and rebboted and he's fine now. Thank you for all your help and suggestions. One question is what usb mode would work well with windows xp/vista, mac osx and linux (ubuntu)? Because we often move between these systems.
If by mistake, you drag and drop an object flash shockwave from your local directory from the PC to the sansa clip, corrupt you the operating system of the sansa clip. When re - start the sansa clip, clip progresses by up to 70% with error message "refreshing database", but fails to start successfully. If the press-'hold' button on sansa clip, the appliance does not start. It crashes with the error message "refreshing database' but doesn't load is not the operating system.»
It was a user error to drag - move all the MP3 files in the directory of the PC, one of whom was of type shockwave flash object file.
Help!
André
Try the clip board. This is the map of the e200 series.
Hi all, I need update the dev of database using the prod database backup, we have TSM server and database of separate catalog for storing backups. No, my doubt is, we can update database dev using catalog, which has the backup of all info the prod
In my previous organization, we used to copy the backup of the prod dev we restore and recover it in dev db. But in this organization, we have a TSM server that stores all backups of prod and dev.
Please tell me we can update dev db using info catalogue simply and without copying backups of prod? If possible how?
Thank you
Harish
user8596912 wrote:
Yes I know that the content of the rman script.
But we have not, so how can we be expected to comment on?
My question is that the connection to the rman is good or bad?
It would depend on the content of the script you do not think that we need to see.
In the end, you can determine whether this is good or bad by testing.
Because the rman is not connected directly to the target db prod.
All the previous sessions of the hot sync were no problem. HotSync full this time, but showed the synchronization of the Agenda has been abandoned. All the data calendar on the desktop was lost. I tried to sync again. Then he got stuck on the agenda and would not continue. So had to interrupt the it. Have not been able to get it back again. Anyone would solve this problem?
I use bluetooth for HotSync.
My Tungsten E2 is pocket computer.
I use Windows 7 Home Premium on my PC,
Palm desktop 6.2.2 Access
HotSync Manager 7.0.2
There may be the database at the source of the problem. Click on the following link for the program called DbFixiT. This program has a trial version that you can download and install on your Palm OS device. The trial version will search the database and then to declare the corruption. You can then search records at the origin of the problem and fix them yourself or you can buy the program and do it automatically repair records.
To install the program, the value of all lines of "doing nothing" except quick installation or install if you use Palm desktop 6.2.
After installing the program on your handheld, the scanner and scan also to BLOBs in the calendar. After you clean up the database on the handheld, set the conduit in hotsync for handheld overrides desktop and perform a hotsync.
If you use Win7 64-bit, you can download and install the drivers USB 64-bit for this version.
Here is the link to the post on the forum with the link for the drivers.
The best way to protect your data is to export the data in each category of Palm Desktop in a separate folder on your PC.
Create a new folder on your PC somewhere that suits. Name it something like Palm Desktop data. Click on the link below and follow the instructions on this page for the export procedure.
With the data stored in the created folder, make a copy of this file and save it on a USB key, cd - rw or external hard drive.
Whenever you change in Palm Desktop, export the data that has been changed in this file and save again to external media.
With this process you can always import the data in Palm Desktop, whenever you have a problem with the data in Palm Desktop, or if your computer/hard drive/device crash.
Another backup option is to use NVBackup and backup on a SD card on your E2. Google search for NVBackup for PalmOS, and if you have a 1 GB SD card, you can save the map for disaster recovery.
Here is a link to a post on the forum about nvbackup.
After crossing solutions 1 to 10 in "impossible to print. Jobs stuck in the queue", I have now lost my printer. Tried shutting down, unplug all the cables for laptop & printer & re connected every 12 hours later. But no sign of the laptop to find the printer.
Copier & scanning work ok & pressing the "Cancel and color" keys on the printer, I have a very good test print.
Printer. HP psc 1215 all-in-one & OS, Dell inspiron 1721.
Eamon.
Open Control Panel-> audio & -> printers-> add a printer-> add a local printer *-> use an existing Port-> select the manufacturer & model-> name of the printer of Type-> Views-> Refresh. (This shows the icon of the printer).
N/B:-* ignored this "use this option only if do not have a USB printer" & have chosen this option.
Help! I'm on W7 Pro, Act! Prem for version 2010 I think the financial. A couple of days, that the program is simply stuck in the taskbar. The program is open, but I for the life of me can't seem to move to the screen. I rebooted several times, facts of the cleaning of virus and malware etc. All to nothing does not. When started the program opens fine and normal, then it's out there just stitting in bar tasks... refusing to go to the screen... mocking me. Pop in for meetings and such alarm works very well, meaning it appears and such. I can't go in the actual program with all my data! Anyone has an idea on what I need to do?
BTW I got this program and the computer configuration for a few years with no problems.
Thank you!
Thank you Chloe -.
The program is the law! by the wise. It is a SQL database application.
I tried your suggestions and they do not work. Thanks in any case. : o).
I finally got the geeksquad remote in and they were able to fix it in a few hours.
I recently got a Lenovo Ideapad laptop computer of game for my birthday just to find that there a hard drive problem, now, recently, he crashed and will not start, simply stuck on the logo of Lenovo starting with the loading icon, but don't start trying system restore brings to this problem and it will also be occansionally trying to fix automatically just for blackscreen and crashed about five minutes after. I don't have a Windows disc because it was before the installation with a program so I don't think that I would need a.
Hi Timmsey,
-You are able to boot to the desktop?
The issue may be caused if you have changed the hardware and software of the computer settings.
Disconnect all external devices (printers, scanner, USB (universal serial bus) drives, etc.) except the keyboard and mouse and then start.
If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue. Then download software updated driver for the device.
You need a Windows 8 install disc to follow the troubleshooting procedures below. I suggest you connect to any other computer, and create a floppy disk to install Windows 8. Using this disk, you can perform the following troubleshooting methods. You can create the form of installation disk the steps here.
How to create the installation media for a PC refresh or reset:
Method 1: Start the recovery environment with installation of Windows 8 media.
It is another way to boot the PC and launch recovery tools when something goes wrong with the operating system.
Please follow the steps below. Insert the DVD to install Windows 8 on DVD-ROM and restart your computer.
(a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.
(b) select the goodtime and the type of keyboard .
(c) click on repair your computer in the lower left corner.
(d) select Troubleshooting to Chooseanoption screen.
(e) click Advancedoptions in the form of resolution of the problems.
(f) click Autorepair screen OptionsAdvanced .
(g) then choose the operating system by clicking on its button.
(h) Windows 8 will then look for problems on the hard drives and verify that all required files are intact.
Method 2: Run the restoration of the system of the Advanced Options screen.
System Restore to restore your computer to a previous state, quickly and easily without losing any of your files and personal settings. Sometimes when you install programs or drivers, they can affect some system settings and prevent other programs to function properly. You can use system restore to restore these settings to their previous state
Follow these steps:
(a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.
(b), select the exact time and the type of keyboard.
(c) click on repair your computer in the lower left corner.
(d) select Troubleshooting in choose an option screen.
(e) click Advancedoptions in the form of resolution of the problems .
(f) select Systemrestore.
Let us know the status of the issue. If you need help, please after return. We will be happy to help you.
Apparently, I scanned my system with a complete analysis of the system (AVAST) and my computer left thinking that it would take several hours. When I came back, my computer automatically shut down because it was left idle for about 4 hours. I don't know if the scan is finished. When I try to start, the screen becomes screen stuck on "Please wait" or "windows setup. Do not turn off your computer.
I already tried to go on the System Recovery Options screen, then will solve the problems, then Advanced Options, but I tried everything what it and the problem persists even when I tried to start in safe mode. I tried to go to the command prompt, and then type sfc / scannow, but he says he cannot parse now. I also tried chkdsk / R, but it said the same thing. I don't know how to run cmd as administrator from the System Recovery Options.
So now I tried to use system restore, but I'm stuck on the logo of windows for about 1 and a half hour. I don't know if I have to wait for it or it is already blocked. In other forums I've read, they were using only the Group of drive 'C:' connected with system restore. Should I do this?
I think to delete AVAST or turn it off somehow.
Please help me.
Problem solved
I would like to share how I solved the problem. I was able to start using the windows 8 cd and in the window that asks you the language of the windows 8 needs to be installed, you can see below "computer repair".
After clicking on it, it automatically prompts me for advanced boot parameters. First I tried the auto repair, but it says the same thing, '.. '. can't fix right now... » So I tried the option "pc refresh. I waited a few minutes to cool to do and after the process, it is more hung please wait screen when starting.
Once connected, I installed programs have been removed. In the local disk files, there is a new "windows.old folder ' showing all programs that I have the old system. Re-install program is easy and the best thing is that I have my computer back.
My deep gratitude to those who helped me. Thank you!
Hello I'm looking for people who are music Apple and iTunes game subscribers who use the game on the old Mac, specifically the machines running 10.5.8 - I really need some advice, or better yet reassuring, just what I'm trying to do. My main machine
Hello My apple TV (the two 3rd generation) does not recognize the Mac through co-location. The networks are the same, updated apple TV, iTunes is 12.4.1.6. My airbook, office mac, iPhone, iPad see my library through co-location. Neither of my appl
I use SeaMonkey as my browser for many years. I just downloaded FireFox and import bookmarks in SeaMonkey. I can't find where to put the file of SeaMonkey bookmarks in FireFox.I use Windows Vista and FireFox 22.0. Thank you.
)
