Stuck on "Upgrade to Vcenter Server Appliance"
We had a situation were our flash player running that esxi 5.0 began to go wrong, so we bought a new one and installed ESXi 5.5 on it. All our virtual machines are running, but I'm stuck on the attached screen. It did that for more and time at this stage and I have to leave soon. If I close my browser window will continue the update in the background?
Also, what happens in case of failure? Can I just install a new Vcenter Unit 5.5 from scratch without importing anything of the former and there are disadvantages to this?
It actually worked came Monday and Vcenter server 5.5 was running
Tags: VMware
Similar Questions
-
The upgrade to vCenter Server Appliance 5.0 to 5.1 error
Hello
I'm trying to upgrade our vCenter 5.0 to 5.1 device and continue to operate in the following error message:
Export DB error
Thu, December 6, 2012 08:47:33 + 0000 * ERROR: cannot run command ' / etc/va/upgrade/pre-scripts/02_embedded_db.sh' 8 *.
This error is located in upgrade.log.
I'm following the steps in upgrade as outline here:
Has anyone encountered this problem?
See you soon.
Hello
I couldn't find a solution and ended up in the development of a new device and the migration of guests on.
-
I looked through the release notes and could not find an answer for this... the current ASB does not see the updates available to perform this move on the current instance of VSA... someone at - there more information on this?
Check out http://kb.vmware.com/kb/2033990
-
Update vCenter Server Appliance 5.1 5.1 U1 fails
Waited about an hour after it started to install... still no upward. Wen in the updatecli.log and to see that there is a mistake constantly repeat... clues?
. / etc/init.d/vami-sfcb: line 238:7385 Aborted nohup/opt/vmware/share/vami/vami_sfcb_test > / dev/null 2 > & 1
. / etc/init.d/vami-sfcb: line 238:7398 Aborted nohup/opt/vmware/share/vami/vami_sfcb_test > / dev/null 2 > & 1
successful, reboot vami-sfcbd.
Vami-sfcbd stop: fact.
From vami-sfcbd: fact.
Verification of vami-sfcbd status:/etc/init.d/vami-sfcb: line 238:7513 Aborted nohup/opt/vmware/share/vami/vami_sfcb_test > / dev/null 2 > & 1
. / etc/init.d/vami-sfcb: line 238:7526 Aborted nohup/opt/vmware/share/vami/vami_sfcb_test > / dev/null 2 > & 1
. / etc/init.d/vami-sfcb: line 238:7539 Aborted nohup/opt/vmware/share/vami/vami_sfcb_test > / dev/null 2 > & 1
. / etc/init.d/vami-sfcb: line 238:7552 Aborted nohup/opt/vmware/share/vami/vami_sfcb_test > / dev/null 2 > & 1
"updatecli.log" 1450L, 98449C 1233,1 85%Not sure but maybe you are experiencing the problem that is mentioned in the Release Notes.
VCenter Server Appliance 5.1.x to vCenter Server Appliance 5.1 update update 1 stops at web interface user while showing the status of update installation of updates *.
When you try to upgrade to vCenter Server Appliance 5.1.x to vCenter Server Appliance 5.1 update 1, the update process stops an hour and the status of update to the user Web interface shows as installation of updates. However, subsequently, the update is properly an hour.Workaround: No.
André
-
How to upgrade vCenter Server Appliance 5.5 to 5.5 Update 1
Hi, just wanted to know how to upgrade vCenter Server Appliance 5.5 to 5.5 Update 1. Is it with Crossover?
Hello
Connect to your device from vCenter:
https://
: 5480 Click on the update tab,
Check the updates and then install updates.
Takes a long time. Restart when it's over.
And you're done
Tim
-
I want to enable (set to true) memoryHotAddEnabled and cpuHotAddEnabled on the vCenter Server Appliance.
I can't the powerCLI user because he needs a vCenter Server Appliance to connect to (right?) and to allow HotAdd of the virtual machine must be turned off.
For anyone wondering, the best way to do this is to connect the ESXi host via vSphere Client, turn off the VM vCenter and update the configuration in this way.
-
VCenter Server Appliance 5.5 update w/o VUM
I'm Manager my first vmware environment. We are a small company and using the Essentials package. I have two hosts upward with a vCenter Server Appliance 5.5 Build 2063318. I'm looking for a way to update the device for security patches. I have not been able to find how to do that when we don't have a Manager Update server configuration. I downloaded the .iso file but have not been able to find all the commands that will allow me to manually install the package. Any help is greatly appreciated.
Note that you must connect vCenter Server Appliance Web Console (VAMI) address: https://vCenterServerIPAddress:5480/ NOT the vSphere Web Client that listens on a different port.
-
Hello gentlemen,
I can not only save this virtual machine with Backup Exec 2014 for a long time.
They are there was no snapshot in snapshot Manager.
Could you help me?
Hello
I found the solution.
I disabled the JOB BE general relativity.
and the host where the virtual machine belong was not the right time. No Ntp server has been configured.
I did and now there works.
I think that the problem can come from this.
-
Location of the vCenter vCEnter Server Appliance 6.0.0 vs Linux plugin file
We have a plugin where we were using vCenter 6.0 hosted on a Linux server. I could get my plugin files in /var/lib/vmware/vsphere-client/vc-packages/vsphere-client-serenity and /import/storage.
We then deployed a vCenter Server Appliance 6.0.0 our plugin and it has a different directory structure. The structure of directory changes to /var/lib/vmware.
Where can I find the folder of vsphere-client-serenity or its equivalent.
Or plugins to treat device unlike a vCenter 6.0 linux host?
Thank you.
I found it in/etc/vmware/vsphere-client/vc-packages/vsphere-client-serenity
-
Setting up Certification Authority (CA) signed certificates for vCenter Server Appliance 6
Hi all
Recently, I managed to migrate to vCenter Server Appliance 6. 5.5, there was a large KB (2057223) on Configuring Certificate Authority (CA) signed certificates for vCenter Server Appliance. I tried to do as it says configure the certificate for v6.
Unfortunately, I understand that some services such as lighttpd are changed in version.
Can anyone provide a new instruction for the v6?
Thank you
Thank you. That helped me to see the idea. However, the explanation in the pages that was not complete. I had to search for more.
This blog helped me solve my problem with the generated certificate:
http://longwhiteclouds.com/2015/03/22/vSphere-6-using-Vmca-as-a-subordinate-CA/
-
VMware vCenter Server Appliance 5.1 is not Autostart cluster
Problem:
After a VMware vCenter Server Appliance failure does not start automatecly.
I have configured to start automatecly to each host, but it does not start automatecly.
My configuration:
Shared infrastructure-plate-forme PowerEdge VRTX with 3 servers running
-3 x VMware ESXi 5.1.0 (799733)
-1 x VMware vCenter Server Appliance 5.1
-Servers run as a cluster with HA.
Unfortunately Autostart VM is not supported in a Cluster, and so the settings are ignored. VM in clusters must be turned on manually (or using a script,...).
André
-
vCenter Server Appliance "URL of repository" evil
Hey guys,.
new to this entire VMware environment.
I am trying install Win Server 2012 and in order to get installed it, I understand that I have to update my current version to 5.0.0 VMware - 455964 I have for later. I was hoping that it would accomplish this by accessing the VMware vCenter Server Appliance in the section "Update." But when I hit 'check updates' I get a:
Impossible to check updates (error update server being contacted. Please check the network configuration. Couldn't resolve host ' VAPP - updates.vmware.com' URL: http://vapp-updates.vmware.com/vai-catalog/valm/vmw/8e70f769-fd50-4a7a-bee2-2c0d945e23b0/5.0.0.3324.latest/manifest/manifest-latest.xml) on Friday, June 20, 2014 3:02:21 PM GMT - 04:00
Error...
So I try to figure out how to invite to get the URL and (current) right to check with success to FIND an update. And if all goes well install it...
What may be a DNS issue? If so, I have not found a place for the DNS entry. Must be outside of the server appliance?
Can you help me? Let me know what else I might need to provide to you guys to get somewhere with my question
Thank you
lookush
To configure DNS on the vCSA change the Type of address to SLAAC-IPv6 first and you can add DNS server address and the host name.
Check this blog for more information: How to configure the vSphere 5 vCenter Server Appliance
-
Open connections of hosts and vCenter Server Appliance
We have number of ESXi hosts configured in our environment with vCenter 5.1, far ssh is open to all in order to access all hosts via SSH. Although authenticating the users available but, even then, the issue raises so bound / restrict administrators IPs or subnet of the network for security reasons. Will be the same for vCenter Server Appliance.
Also can we restriction of IP level for the Vmware Client users, good that now everyone can make the connection between vSphere and vCenter cleint. Please advice
Hi friend
Please see below the resources needed to achieve the same on ESXi
http://www.definit.co.UK/2013/10/vSphere-Security-Advanced-SSH-configurations/
Restrict access to the ESXi host Console - see the lock Mode. VMware vSphere Blog - VMware Blogs
Limit the vSphere Client access to IP or network - Firewall 5 ESXi & raquo; System administrators
-
Hi friends,
If patches of the host management can be done through Vmware Update manager vCenter Server Appliance as in vCenter Server.
Tell me other differences between them...
Kind regards
Sirot Vijay
1. Yes we can connect to the device using the vSphere client.
2. in the installation of the update manager VCenter information will ask and he will automatically fit no special measures required.
3. no conflict. Its just like you have two vCenter servers, but you can not have two server vCenter managing the same hosts.
-Avinash
-
default connection of vCenter Server Appliance no longer works?
Hello
We had installed 5.5.0.5201 VCA and works very well for a while now. At any given time in the last 24 hours the reason, the default root | VMware connection fails to work?
Domain creds for vClient still works, but we are unable to connect to the actual device.
Not quite what our options are, or why this happened!
You may have hit the expiration of the default root account which is 90 days.
alert vcenter Server Appliance 5.5 root account password has expired. virtXpress
Maybe you are looking for
-
I have a direct connection to the internet and that you do not use a proxy server. Every few weeks, Firefox will automatically reset itself to be configured to use a proxy to the loopback address (127.0.0.1). Manually change to 'No proxy' works, but
-
15 - n080er: 15-n080er HP drivers for x 64 Windows 7
Hello I need all drivers for Pavilion 15-n080er for laptop Windows 7 Ultimate x 64 I found the drivers for 8.1 W but not helped for W 7 Help, please Thank you
-
Hey microsoft,. Please, how can I do a pochest in windows server 2003 / exams 70-292 and 70-296 Training Kit, by Dan Holme and Orin Thomas, editors. I am resident in the Republic of Chad.
-
Hello On many different models of the HP LaserJet, life County goes backward. I have trawled through the forums and found this issue several times before but I still have to find answers. HP LaserJet, many different models, we have thousands of print
-
error 0xc0000225 windows does not start
Hello everyoneI have a sony vaio, vista edition windows Home premium and basically my computer was working fine and all of a sudden it went away, and when I restarted it, directly, he went in the windows startup repair options and not fix the problem