Stuck shift - windows 7 64 bit

Similar Questions

• Stuck with Windows 7 64 bit from the old disk HARD of SSHD migration

  There are a lot of smart people on this forum - maybe you can advise me. I recently bought the Seagate 4 to Desktop SSHD ST4000DX001. I'm stuck with migration my Windows 7 64 bit and all the data from the old HDD to the SSHD.  Then I used the Windows Disk Manager to format the SSHD in GPT format (recommended by Windows). Then I used XXClone (freeware from the internet) to clone my old HDD. There was a message of XXClone who said that as the SSHD is GPT formatted, it didn't ensure that the clone is bootable. I tried to start the sshd with the clone of my operating system and data. It did not work.  Now I use the new SSHD as a secondary drive and I use the old HDD as primary bootable drive.  My motherboard is a Gigabyte GA-A55M-DS2.  It's EFI but not UEFI.  I heard that EFI support starting from the 3 TB GPT partition while UEFI support starting from much larger disks.  Is this information correct?  Does this mean I have to change the motherboard in GA-H61M-D2H-USB3 to use my 4TB SSHD to start from a GPT formatting?  Help, please.  Thank you so much.

  Problem solved.  I did a fresh install of Windows 7 64 bit for my new 4 TB (format decimal numbering system) SSHD (3.63 TB in binary system).  He starts without a problem.  The cloning approach has not worked because my old HDD MBR format and it the SSHD uses the GPT format.  This means that I have to re-install my games and copy my data from the old disk to the new.  Thanks to everyone who responded to my messages.

• Stuck on Windows 7 64 bit print queue. Tried everything, but no luck!

  Hi people,

  My Windows 7 (64-bit) PC has decided to stop printing this morning to one of my printers. I followed him there down to a document stuck in queue to my HP Photosmart 5100 series. These are the things I've tried so far for the quarter...

  • Tried to remove the (only) document from the queue and tried to remove all THE documents in the case where it makes a difference. It just says: "error processing command.
  • I deleted the printer and added. All this achieved was to create a version of 'copy 1' of the printer. Even if the old printer icon disappeared, Windows seemed to remember that the document has been put on hold, and therefore would not release the original name for the re - use.
  • Stopped and restarted the SPOOLER service and tried to delete the document inbetween.
  • Checked the file C:\windows\ system32\spool\printers, but it was empty.
  • Tried to connect the printer to a laptop - it printed fine, so I know that the hardware is OK.

  Please, if please, please help me get rid of this document of thugs, as this means that I can not print anything to one of my printers. There must be a place that contains the details of the document - I just need it has flushed out. Any ideas would be warmly welcome! Thank you.

  As a result of this thread, I wanted to just people to know that I finally solved the problem. It is a large number of software removal and reinstall the drivers from the HP website several times. Difficult to ensure that what finally did the trick, but now resolved thanks.

• Installed windows 10 64 bit on MBP early 2011, installing the driver software stuck bootcamp

  Installed windows 10 32 bit on MBP early 2011. Bootcamp software support 4.0 installs fine.

  And then upgraded to windows 10 64-bit on the MBP even. But bootcamp software installs ok at first, then gets stuck in the audio driver installation.

  Can someone suggest me the right version of the bootcamp software please?

  Also, I even this problems from yesterday, my macbook pro late 2011 updated for windows 7 64 bit pro at 10 64-bit windows, then all my drivers boot camp work but when upgraded to Windows 10 pro, Setup stopped in audio only step no thing happened, thank you, I need to fix the installation for my mac files because I have more than work on windows today...

• Installed PSE12 of disk on Windows 7 (64 bit) but when I try to enter it asks me to sign the Publisher. Stuck in a loop!

  Installed PSE12 of disk on Windows 7 (64 bit) but when I try to enter in the editor it asks me to connect for the first time, I do it, so I need to go back where I came from just. Stuck in a loop!  Connection is correct.  If I click on Organizer it seems to work properly but I can't in the editor.

  12. does not elements

• Windows Vista 64-bit stuck in shutdown

  I had to reformat my hard drive and reinstall Windows Vista 64-bit. After he had several updates to my machine same day. The next day, there were several more updates downloaded, and after those, I got a problem when windows is stopped, it never ends. I have to force a stop down by pressing my power button. Is two questions - there a fix for what I can do? does anyone know what update was responsible for this where I might be able to uninstall the update? I thought to go in and uninstall all updates pushed the second day, but do not know if that will cause more problems or not. I heard about what is a problem for many people. This is the first time I had this problem.

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Document stuck in the print queue (from Windows 7 32 bit via wi - fi to Pro P1102w)

  When I try to print from Windows 7 (32 bit) via the wi fi on HP Pro P1102w documents appears to repopulate the queue permanently / print spooler; multiple copies keep coming only one request; document difficult to undo queue (you need to turn off printer). Analysis of safety (MSE) shows zero, HP diagnostics shows zero (works very well.).  New printer, not happy .  Any help much appreciated.

  Try to disable enable bidirectional support under properties/Ports.

• CS5 on Windows 7 64 bit full screen color shift

  I am running CS5 on Windows 7 64-bit with a calibrated Eizo monitior.

  When I go full screen mode there is a changing color with the reds change very distinctly.

  Anyone else facing this problem?  All solutions?

  If you see that the problem is solved by turning off OpenGL, this could be a case where the OpenGL activation again and change a setting of different OpenGL "Advanced" mode may help.

  I suggest this because I know that Photoshop color management in many different ways, according to OpenGL capabilities (and possibly the settings, I'm not sure of the part).  Maybe a different mode (for example, 'Basic') will allow you to use OpenGL improvements and always adjust your colors.

  In addition, as it is always recommended, make sure you search video drivers updated on the web site of the manufacturer of your video card.

  -Christmas

• Tecra M11 - 11J - cannot install Windows 7 64 bit

  Tried to upgrade a Tecra M11 - 11J for Windows 7 64-bit.
  The installation gets all the "Loading Windows files" screen, then turns off and freezes, with the release of maxing out CPU fan but no HARD disk activity.

  Have tried to reinstall XP (works fine), flashing the BIOS to the latest version, re-seats of the RAM, change the HARD drive in "Compatibility" mode and reinstall Win 7 - same problem.

  Have you tried Win 7 32 bit - the same problem.
  Installation of USB, instead of DVD - same problem.
  Different flavors of Win 7 - same problem!

  It's extremely frustrating.
  I upgraded the memory up to 8 GB, hoping to take advantage of this with W7x64 and now I'm stuck with a XP machine and 4 GB of of of the RAM to lose.

  Would be very grateful for any suggestion.

  Thank you.

  and installation of Win 7 does not even using the old 4 GB of RAM?

  Or have you tried to install Windows 7 on the Tecra M11 using the new 8 GB of RAM?

  What of the HARD drive? The HARD drive is displayed on the first page of the BIOS?

• HP Pavilion Desktop PC Windows 8 64-bit impossible to close p7-1102

  I have a desktop HP Pavilion p7-1102, I bought with Windows 7. After upgrading to Windows 8, the will of the computer is more closed under any circumstances, it seems. I am currently running 64-bit Windows 8and before I was under Windows 7 64-bit. I did a clean install, I've upgraded to Windows 8 using an upgrade disc. Here is what I tried so far trying to get off the computer:

  • "Shut Down" in the menu of charms
  • "Restart" in the menu of charms
  • Now shift and pressing 'Stop' in the menu of charms
  • Now shift and press "Restart" in the menu of charms
  • Command prompt using "shutdown /s /t 00 '.
  • Disable the startup hybrid and all these retry

  None of this has caused to the computer stop at all. I have also received no error messages, simply, the computer does nothing whenever I try to close it. Everything I can get the computer to do is put in hibernation. Everywhere I looked, I saw these options and they have not helped me to get my computer to shut down. There is nothing another wrong with my PC, I catch up updates Windows, have anti-virus protection and have had no other problems with Windows 8. This problem started to occur immediately after I've upgraded Windows 7 to Windows 8.

  Does anyone know of any other methods that could help the computer is turned off? I am at a loss!

  Hello

  If you have tried all the start fast and hybrid startup options, and then try this:

  Take care to create a restore point before this step...

  1. Press Win + R and type Regedit = > click OK to open the registry editor
  2. Go to the following path: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SessionManager
  3. Once opened, on the right side, look for entry ' BootExecute'. Double-click it.
  4. Delete all 'Value data' part and write the following in it:
     autocheck autochk * , then press OK.
  5. Now, "RESTART" (do not click on SHUTDOWN) your computer

  Once it reboots, press the STOP button and check if it works...

• Satellite L500D - 16L - no disk recovery Windows 7 64 bit included

  Hi all

  I'm curious... I bought this laptop a while a go and was browsing the Web from Toshiba site and it says that this laptop should have Windows 64 bit on it. I thought just is it possible to install my own copy of Windows? Usually I'm stuck sort of encrypted messages as this copy of Windows may not be installed on this laptop or something or where can I get an official copy of windows which must go with this laptop?

  Hi whipser1,

  I checked the specs on the site Web of Toshiba Satellite L500D - 16L and 64-bit Windows 7 is pre-installed, but you can also get a recovery with Windows 7 32 bit disc.

  So what version of Windows 7 is currently installed?

  If Windows 7 64 bit is installed you can create the recovery disc yourself for the 64-bit version. Therefore, to start the preinstalled Toshiba recovery disc creator and follow the instructions on the screen. You just need a few blank DVDs to create the disks I recommend DVD-R from Verbatim or TDK media.

  Check this box!

• EFI system error related to... Cannot install windows 7 64-bit on lenovo g580...

  Hello

  I have Lenovo g580 which had pre-installed BACK inside {i5, 500 GB, 4 GB} and initially I had installed Win 7 32 bit on it. At that time, there was some problems while rebooting the 1st time, but I ran windows repair option and everything went well.

  But the problem came when I tried to install windows 7 64 bit on the laptop with a DVD, no matter which drive to choose, it only allows me to move forward. When I checked the details, I got the error message which is attached here.

  Link to image

  There is no option of disk controller in the BIOS, or anything whatsoever the UEFI systems tto.

  I did the r & d on uefi systems, but I want to be sure of everything until I get ahead of what it is.

  Any help would be appreciated.

  Moderator comment: images > 50 KB converted for programming. Community rules.

  Thanks for no help guyz!

  but I found a way... so for anyone else out there... Here is the solution...

  1. When installing to the partition screen, press SHIFT + F10.
  2. At the prompt, type diskpart and press ENTER.
  3. Type list disk (not the number of the disk to be used)
  4. Type select disk X, where X is the number of the disk to use.
  5. Clean type. This erases all data on your system.
  6. Type convert gpt
  7. Now reboot the system with the DVD/USB, and you will see only the unallocated space. Use to install the new windows.

  Be warned however, this clears the partition table on the disk; Make sure that you have a backup before attempting this, if you have important data

• Can't mistake of playing Age Of Empires 3 on Windows 7 64-bit message - d3dx9_25.dll isn't is either not designed to run on Windows or it contains an error

  Original title: can not play Age Of Empires 3 on Windows 7 64 bit

  I recently downloaded aoe 3 games for windows program, see the list also useful with Windows 7.

  Download fine, as does the installation but I have a very big problem all I get when I try and run all the extensions of aoe 3 is the following error

  c:\windows\system32\d3dx9_25.dll is not designed to run on Windows or it contains an error. try to install the program by using the original installation media or contact your system administrator or the provider of software for support.

  The file in question is there I tried to delete it using the program dxwebsetup or one that comes with the download aoe3 however both reinstall the same file accurate return.

  I have try the .exe running in all sorts of compatibility mode as well as manually from the install in compatibility mode. all I get is the same error each time. I ran the esfile auditor and lists some invalid files, I guess it's because they are cracked to work without the cd files. I downloaded the game 3 times now.

  My drivers are all upward to date, research on the internet I can't find a lot of information, a lot of links goto the forums on agecommunity.com but they are no longer works.

  I am really stuck and would appreciate any help thanks

  Hi Mitsouki,

  This problem may occur if the Microsoft DirectX file that is mentioned in the error message is damaged or is not copied correctly.

  Step 1: You can follow the steps mentioned in the article below, which deals with a similar question

  Game error: "the file d3dx9_xx. DLL is not found.

  http://support.Microsoft.com/kb/910813

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• OfficeJet 4630: anyone can print reliaby with Officejet 4630 under Windows 10 (64-bit) using wireless?

  I have a couple of PCs.

  Both run Windows 10 (64-bit).

  An upgrade from 8.1 64-bit. The other is Windows 7 ultimate (64 bit).

  I bought Officejet 4630 at the end of September.

  So far I have not been able to print from a reliable PC at all.

  Sometimes maybe a page can be printed, but if I try the next page. The print queue seems to get hung.

  Worse, on a PC (Win7 64-bit upgrade), I can not connect with USB at all.

  Immediately after installing the driver, it fails to "print test page"? What gives?

  (I have not tried the USB connection with other PCs through the situation. He's far away and so connected via radio.)

  Strangely enough, it's the HP printing diagnostic seems to work perfectly. It prints the test page.

  But, after a week of Calvary and see how works the test via the web interface, I now have the feeling that

  HP diagnostics program simply sends a command that causes the printer to print a test page to itself, and not

  through the path of ordinary driver through what print ordinary application data. It can be found.

  Due to the failure of printing with a USB connection, I asked local HP support for replacement t

  hinking that unit was bad.

  However, the replacement arrived today, but the same symptom!

  Agah.

  I'm afraid that HP screwed royally here, but worse yet, it doesn't seem to be aware of the problem in the light of some

  Reviews of so-called unconscious support people!

  If someone has this printer works reliably on windows 10 64 - bit

  Please let us know what you were doing. (although the chance that someone with perfect condition watch Forum HP may be low. You are posting and I read this forum because of problems...)

  -How you installed the driver (from which source)

  -which tweaks you did.

  I tried to install the OJ4630_198 and the driver is updated to Windows.

  Windows Update seems to be a little better, but still stuck print jobs are seen after a few

  tests and unnecessary. (Initially because of this apparent initial success, I thought that the problem was limited

  so a PC, but now I think that both PC evenly suffer failure).

  So far, I tried to change the PORT to a fixed TCP/IP address port (which sometimes seems to be feasible: sometimes not.) I was not able to understand why. Maybe the difference between HP driver or Windows update)

  Sometimes after the Ministry of port, the first printing time works, but the

  next print does not work.  It remains in the queue.

  This has been driving me crazy...

  If person not steps forward with the installation of reliable work (10, 64-bit windows), I think I'm going for it back to HP, although the initial cooling period has expired from a legal point of view, I'll see if I can convince the support contact.

  I bought HP printers only over the years. They lasted well and worked like a charm, and the black ink was really nice.

  After that, I can't printers recomment the HP to my friends more.

  TIA

  [Driver in Deskjet 6980 works for printing with capricious 4630]

  Under improved Windows 10, too!

  I checked it after upgrading my PC under Windows 7 64-bit of Windows 10.

  After a few false starts, however, some programs are missing 'Dropbox' "Norton Internet Security" (?)

  sort: I downloaded the binary Moose and once I let the Installer run again, they picked up the proper

  configuration of the previous installation and started running.

  I needed to tweak 'Register windows' but when I tried to run 'regedit' something 'Extended attributes are '.

  inconsistent"and any program that requires administrative privilege would begin: maybe Dropbox and Norton Internet

  Security has failed because of this issue. Surprisingly, I could fix this by restoring the default Windows theme.

  (In my previous attempt to update, I put it to something Bing, a jazzy theme on the Japanese season, or something.

  Affected and surprising finished showing 'Extended attributes are incompatible' (or you may need to

  reset the sound theme as well. YMMV.) I raised this strange questions after the upgrade just in case

  These problems are related to the Deskjet 6980 under Windows 7 64-bit driver installation before upgrading to Windows 10.

  Somehow, however, the previous installation of the driver instance 4630 seems to have disappeared (maybe I deleted it before

  the upgrade, I don't know.) So I install driver 4630 for * SCANNING * purposes only.

  FAX can wait a while.

  Finally, some working environment for Officejet 4630 with using the Deskjet 6980 driver for printing

  is being created.

  TIA

• Blu Ray does not work after upgrade to Windows 7 64-bit

  Hope someone can help with this problem. I found a lot of forum and users with similar problems but I can't solve this problem.

  I bought this HP Pavilion DV7-1055EA about 3 years ago the drive blu - ray one of the points of sale, it was loaded with Vista 32 bit. After making this computer has 4 GB of RAM instead of 3, I did a clean install of windows 7 64-bit. After which my Blu Ray player stopped working.

  When inserting a CD/DVD, the drive works fine and everything is as usual, however when insert a Blu Ray disc windows does not recognize the drive IE "drive is empty".

  Different things, I tried to set the inclusion of the problem, reflashing the BIOS, install the latest firmware, re - install the game media, installed PowerDVD but without any change in the symptoms.

  Can someone help with this problem? Well, I'm stuck on this one like blu ray readers are not my strong point in computers. Maybe HP (in their wisdom) printed a digital brand on the device which prevents him from being compatible with more recent versions of windows? I talked to HP however my warranty has expired I do not pay £15 for a fool to tell me to come back for win vista (which is the worst OS known to man kind) or that there is no solution available. Help, please?

  Hello

  After writing this last post, so I decided to download Nero Info Tool to look at information from drive etc.

  The program asked if I could put in a disc to test the speed of running, so I thought... what the hell I'll put in a blu - ray disc and see what happens.

  Next thing I know that running speed test took place then everything suddenly the blu ray kicks in life and he was here... smooth as the more calm waters, known for the kind of man... my blu ray film.

  Reboot the machine and now the blu - ray player works fine. Any idea on what just happened?