"The disk in drive F is not formatted. You want to format it now? »

Similar Questions

• HP ProBook s 4540: How can I tell if my laptop has all the spare HARD drive bay or not?

  How can I tell if my laptop has all the spare HARD drive bay or not? I want to use an SSD, but also my HARD drive as secondary.

  @ShohagDr

  This model has only one.

  Your maintenance and Service Guide here.

  http://www.HP.com/CTG/manual/c03758231.PDF

  Laptop HP ProBook s 4540 - videos to remove/replace

  http://h20464.www2.HP.com/results.htm?SID=5229455&MEID=0B16F6F9-A9BB-4275-8FB4-57CCA3816318

  REO

• Error - Windows cannot read the disk in drive F:\-Assurez-vous that the disc uses a format Windows recognizes. If the drive is not formatted, you must format it before you use it

  Original title - Windows cannot read blank disc

  When I insert a blank DVD-R disc for burning, an error is indicated - "Windows cannot read the disk in drive F:\-Assurez-vous that the disc uses a format Windows recognizes." If the drive is not formatted, you must format it before you use it. "So I can't burn a DVD-R disc... But if I use the DVD-RW drive, it can be burned smoothly without any problems... Windows cannot recognize only the DVD-R disc... My DVD - RW driver is Sony Optiarc AD - 7280S. When I use Windows 7 without problem was found in the burning a DVD-R disc. But after using Windows 8, I can't burn a DVD-R disc. So please help me...

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you have a problem with the disc.

  As you mentioned that you have tried the steps of troubleshooting mentioned in this thread.

  I suggest you run the Fix-it tool and check if it helps.

  This tool diagnosis and repair CD or DVD drive issues, when you can not burn or play CD or DVD discs when a disc is not found, not available or not connected.

  See the link below.
  https://support.Microsoft.com/en-us/mats/cd_dvd_drive_problems?WA=wsignin1.0

  As we have tried most of the troubleshooting steps to resolve this problem, and if the problem persists after you run the tool fix - it also. So, I suggest to get in contact with equipment manufacturers , because they will be the best person to help you.

  Hope this information helps. Please let us know if you need additional assistance. We will be happy to help you.

• "You must format the disk in drive J: before you can use it"

  Says error message "You must format the disk in drive J: before that you can use" I have a removable USB storage drive that I always connected to my computer whenever I have download movies save disk space on my computer.  Now, he wants me to format this disk storage.  Also, where he used to qualify this drive as "Removable disk", it is not labeled as Local J: drive. I don't want to format this drive because it erases all my files and folders on removable USB storage drive.  Please help me.

  I had the same problem.
  And I have a solution for you... The problem is that when you plug in your HD first, Windows 7 install your hard drive and associate it with only this USB port (whether the USB port "4") If you want to use (HD) again, you need to plug it into the same USB port (USB port '4'), where it was first installed. It's stupid! But that's how it worked with my HD.

  Try all USB ports you have on your PC.

  Good luck.

  Hope this has been helpful. : D

  PS: the same problem is with all the damage that connect you to your pc.

• After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

  After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

  Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  10. restart once again & test.

  NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers. Now what?

  Floppy drive read only not the disks.

  Hello Fishface1977,

  Thank you for your message.  If nothing has changed on your system, recently, to include hardware, software or updates?  Also, have you installed the drivers that came on the CD with your system or you download/install the drivers the most recent of the website of the manufacturer of your computer?  It is recommended that you download/install the drivers provided by your computer manufacturer's website.  Please let us know so that we can better help you get this issue resolved.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers. What should I do now?

  My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers.
  Convenience store said to click on properties Insert the diskette and
  Double click on open, but when I do that it stop computer
  and opens the recovery and ask for a correct diskette,

  Hello Tallm,

  Thank you for your message.  Did you get your floppy drivers of your installation diskettes?  If so, go to the website of the manufacturer of your computer and download/install the latest drivers.  Please let us know if this or help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• USB Flash Drive gives the error "you must format the disk in drive E, before you can use it"

  I just plugged my USB pen and a message pops up saying: "you need to format the disk in drive E, until you can use" I was wondering if and how I can solve this problem? Can anyone help? Sam
  * original title - USB pen problem *.

  Hi samanthaGibbons,

  What is the make and model of your USB Flash drive?

  The USB Flash drive works in any other computer?

  It might be a problem with the drive itself, or it may need to be formatted.

  I suggest you check out the website of the manufacturer for possible troubleshooting or know how to reformat the disk, if necessary.

  I hope this helps!

• "You must format the disk in drive g before you can use it"

  "You need to format the disk in drive g before you can use it... "Really crappy to get Msg. I have a Corsair 16 GB FAT drive. I got the disc from my Vista computer and go to a XP machine safely. Aaarrrggghhh!

  New tips on how to solve this problem?

  When you say fat, do you mean exfat?

  If you have the disk formatted exfat format, you may need to update xp so as to be able to read,

  article following the base of knowledge may help you.

  http://support.Microsoft.com/kb/955704

  good luck keep us,

• Windows cannot read the disk in drive c.

  I recently bought 5 blank DVDs to burn files, but when I put the disk, it showed no AutoPlay, even if I check suggestions asking me every time, but when I double click on the CD player, it says this message, "Windows cannot read the disk in drive c." can someone help me with this problem?

  Not all DVDs are the same, there are many different types and some DVD players may require a particular type

  If the DVD is blank has nothing to read, that it is not formatted/prepared

  With a dvd in the drive, in Solution Explorer, select a file, rt-click and select send to DVD, it works

• IType.exe - no disk in the drive. Insert the disk in drive D:

  I have a message that says "itype.exe - no disk in the drive.  Insert the disk in drive D:"I do not know how to delete or correct this problem... help, please.  Thank you!!!

  Hi LauraCzarnecki,

  1. when exactly you get this message?

  2. did you of recent changes on the computer?

  IType.exe is a process belonging to the Microsoft Intellitype keyboard software. This can probably occur due to corruption in the registry for the key intellitype.

  If you have any IntelliPoint or IntelliType software on the system installation, then try uninstalling and reinstalling.

  For more information, please visit the following links:

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

  http://www.Microsoft.com/hardware/downloads/default.mspx

  Hope this information is useful.

• The operation did not complete because the disk management console view is not updated.

  Disk title management error: Windows 7 original by adding a drive letter
  Well, I don't know why this is happening, but if I try to add a disk to my windows system, it will not automatically add a drive letter, but it will add a drive letter to my USB and USB external drives without problem. It's just when I plug it in sata he's going all wobbly. I see the HARD internal disk in disk as a disk, but windows disk management Refuses anyway shape to add a drive letter, even with diskpart automount enabled. This is the error I get when I try:

  "The operation failed to complete because the disk management console view is not updated. Refresh the view by using the refresh task. If the problem persists close the disk management console, then restart disk management or restart the computer. »

  Absolutely nothing works. I tried Diskpart, acronis, AOMEI, EausUS, chkdsk, sfc/scannow, Microsoft fixit. Nothing works to get the drive Manager to add a drive letter to an internal HARD disk. Like I said, sticks and USB drives are no problem. I looked all over Google and I have not seen one solution to this problem short of a total erase and start again, and at this point, I'm not be done with everything I installed and might have to reinstall.

  I have other systems that do not have this problem. Just this one windows 7 install x 64. Can anyone shed some light on why this happens and how to fix it or if there is even a fix for it.

  Thank you

  Methadras

  Just to follow and finish this, the old MAIN drive has had some problems and was

  continues to worsen, it ends up by crashed.  scannow revealed some Windows system

  Files were corrupted and could not be repaired.  After the crash, I used the blank hard disc 500 gig

  and did a restore of the system since the disks created with the purchase and restored the system to

  "DAY 1".   Yes all the data and installed programs are missing, but I reinstalled my software.

  Adding external or internal disks worked without any problem now.

  I created a Windows 7/64 system repair disc.

  I created an Image of the system.

  I have a backup plan.

  I do the scheduled backup.

  I learned a lesson...

  Joe_T45

• Filed to load the disk access driver

  Partition Wizard displays "Classified to load the disk access driver" after his laptop with ThinApp.

  Could you please tell me how to fix this error.

  I bet that the application has a device driver, used for access to / manipulate the disc. ThinApp can virtualize device drivers. Generally, disk tools are poor candidates for ThinApp. You don't want a virtualization layer between your disk tool and the disk.

• Series of steel engine error: The SteelSeries Engine version is already installed. You want to uninstall?

  Original title:

  Steel series engine

  I recently got a new computer and wanted some things from my old computer so I got an external hard drive a friend off the coast and put things on it and their transfer on, this included my Steel Series engine with my keyboard settings (color preference / macros), but when I tried to use the file had some sort of error so I deleted and tried to download a new engine to their website to find Once I tried to run, I received a message saying:

  The SteelSeries engine version is already installed. You want to uninstall?

  I tried to click Ok but nothing happens and when I try to install again, the same message shows. What should I do?

  Hmm... Yes. You may inquire about the forums of Steelseries, but--

  -Have you restarted the machine since the abolishment of the Steelseries software installation directory?

  -Do you have a System Restore point before that you copied the software Steelseries on the new computer, or before you tried to run the software?

  -Did empty you the folder Temp (User\AppData\Local\Temp)?

  If you perform a new installation of Windows, it should have that Steelseries registry entries

  (or appear in programs and features), and simply copy the program to the new machine should

  Don't let not any evidence after that you deleted the installation directory...

  -Unless there is some registry entries that are created when you first tried to run the software?

  If there are registry entries, you should be able to find where to find where they are in the register to the

  SteelSeries forums.

  Once found, deleting the keys from Steelseries should fix things (back up the registry first).

  Although some things (lots of old games) can run when they are copied, other software will require drivers installed, or the registry entries made, during the installation.

  If you use a picture of your old Windows installation it would be OK to just

  Copy your software on a new disk (assuming that you use the same drive letter), as the registry keys, and

  all parameters of all would still be intact, and the drivers installed.

  Assuming that Steelseries is similar to Logitech, copy all of the program installation directory for the

  new machine would not help keep your settings anyway.

  -The most often, you will find the devices profile files somewhere in your user folders.

  That is to say. -Logitech retains its profiles in User\AppData\Local\Logitech.

  -It is also possible that there is a file of these saved profiles (.cfg - .ini, or?) which is

  the origin of your grief.

  Pop all these files in a folder for backup and if you can then get the software to install, replace

  the profile files created during installation with the file appropriate to your backup folder.

  .

• When I log into Windows Live Mail I get the following message: "you have unsent messages in your Outbox. You want to send them now? Yes or no"

  When I log into Windows Live Mail I get the following message: "you have unsent messages in your Outbox. You want to send them now? Yes or no,"that does this every time as I have disconnect. I look in my Outbox and there aren't waiting for messages. How can I get rid of this pop up?

  Hi LarryMorton,

  Thanks for posting your question in the Forum of the Microsoft answers Site. Your question would be better addressed by experts in the in Forum Windows Live Mail. Please repost your question here,