Student needs help with VMware Workstation

Similar Questions

• Need help with VMware Player to run!

  I've been using VMware Player 7.1 successfully for some time, but my drive hard host started making noise, so I installed a new SSD drive as drive C on the host computer.  My old hard drive installation was 8.1 for Windows 64-bit, but needed to be cleaned, so I did a clean install of Windows 8.1 64 bit on my new SSD for the host.  My guest OS (8.1 64-bit Windows) has been installed on drive E, then I'm not touching this player.  I then installed VMware Player 7.1 and all is well.  However, when I now run VMware Player 7.1 and try to open my (8.1 Windows 64-bit) guest OS, he says now that the Intel VT - x is disabled.  I've never touched the BIOS at all, but to check I went into the BIOS and Intel Virtualization is always on because it has been.  My system is a motherboard ASUS Sabertooth with an i7 processor and 16 GB of ram.

  So I rechecked everything in the BIOS and made sure the virtualization is enabled.  What else can I do to get VMware Player 7.1 running?  Help, please!

  The log file created when I tried to run the guest operating system is attached.

  Thank you

  Abby

  It is indeed strange that there is a difference with no changes to the BIOS. In any case, other messages in the forums, it seems like some antivirus/end point protection applications can cause these issues (see, for example, binary translation is incompatible with the long mode). You have already installed this application?

  It might be interesting to see vmware.log from the virtual machine HARD disk.

  André

• Help with VMware Workstation! Missing hard files

  Hi all

  As I tried to move a virtual machine from one laptop to another (without it being fully saved, big mistake, I know now what very well), I moved the files by mistake and did not copy the files. The files that I moved, I deleted, thinking they were just copies that I went from using a USB key using google drive.  Oh I don't have the files on the USB key.  And that's where I was wrong.  In turn, I deleted 3 - files s00X.vmdk and virtual machine does not open on 10 VMworkstation. The error I get when I try to take back the machine is this:

  Cannot open the file 'C:\Users\xxx\Desktop\ISO\OSCP\pwk_vm-cl1-000001.vmdk ':

  I can't go back to the previous snapshots in the snapshot either Manager.

  If I open pwk_vm-cl1 - 000001.vmdk with Notepad, I get the following information:

  ------------------------------------------------------------

  # Disk DescriptorFile

  version = 1

  Encoding = 'UTF-8 '.

  CID = eb40a504

  parentCID = 8887bfed

  isNativeSnapshot = 'no '.

  createType = "twoGbMaxExtentSparse.

  parentFileNameHint = "pwk_vm - cl1.vmdk".

  # Description of the measure

  RW 4192256 CLAIRSEMES ' pwk_vm-cl1-000001 - s001.vmdk.

  RW 4192256 CLAIRSEMES ' pwk_vm-cl1-000001 - s002.vmdk.

  RW 4192256 CLAIRSEMES ' pwk_vm-cl1-000001 - s003.vmdk.

  RW 4192256 CLAIRSEMES ' pwk_vm-cl1-000001 - s004.vmdk.

  RW 4192256 CLAIRSEMES ' pwk_vm-cl1-000001 - s005.vmdk.

  RW 4192256 CLAIRSEMES ' pwk_vm-cl1-000001 - s006.vmdk.

  RW 4192256 CLAIRSEMES ' pwk_vm-cl1-000001 - s007.vmdk.

  RW 4192256 CLAIRSEMES ' pwk_vm-cl1-000001 - s008.vmdk.

  RW 4192256 CLAIRSEMES ' pwk_vm-cl1-000001 - s009.vmdk.

  RW 4192256 CLAIRSEMES ' pwk_vm-cl1-000001 - s010.vmdk.

  RW 4192256 CLAIRSEMES ' pwk_vm-cl1-000001 - s011.vmdk.

  RW 4192256 CLAIRSEMES ' pwk_vm-cl1-000001 - s012.vmdk.

  RW 4192256 CLAIRSEMES ' pwk_vm-cl1-000001 - s013.vmdk.

  RW 4192256 CLAIRSEMES ' pwk_vm-cl1-000001 - s014.vmdk.

  RW 4192256 CLAIRSEMES ' pwk_vm-cl1-000001 - s015.vmdk.

  RW 30720 SPARSE "pwk_vm-cl1-000001 - s016.vmdk.

  
  

  # The database disk

  #DDB

  ddb.longContentID = "f656846a95bf2699f5065afdeb40a504".

  ---------------------------------------------------------------------

  So I check my file to make sure that I have all the files. The 3 I have removed were the following:

  • pwk_vm-cl1-000001 - s001.vmdk
  • pwk_vm-cl1-000001 - s002.vmdk
  • pwk_vm-cl1-000001 - s003.vmdk

  My questions:

  Is there anyway that I can restart the machine with these deleted for good void vmdk files? Even if it's to a State previous/snapshot?  I have pwk_vm-cl1 - 000002.vmdk in pwk_vm-cl1 - 000011.vmdk files and all the appropriate sub files. I still have all the snapshots and vmsn, vmx, .vmem and vmsd for the vm files.

  
  

  I know it's totally my fault and my own fault. This virtual machine has been used for a course I took and have spent hours 150 + on, just to start the machine and retrieve my file of massive if possible note. You can provide any help would be greatly appreciated.  All of my current files are backed up, so I'm free to try various corrections, as appropriate. If you need additional file information, I can provide probably not.

  Thanks in advance for your time.

  General information:

  Below you will find the. VMX file to the virtual machine if it helps

  scsi0:0. FileName = 'pwk_vm-cl1 - 000002.vmdk.

  IDE1:0. Present = 'TRUE '.

  IDE1:0. FileName = "automatic detection".

  IDE1:0. DeviceType = "cdrom-raw"

  ethernet0. Present = 'TRUE '.

  ethernet0. ConnectionType = "nat".

  ethernet0.wakeOnPcktRcv = "FALSE".

  ethernet0. AddressType = 'generated '.

  USB. Present = 'TRUE '.

  usb.generic.allowHID = 'TRUE '.

  EHCI. Present = 'TRUE '.

  ehci.pciSlotNumber = "35".

  Sound.Present = 'TRUE '.

  sound.startConnected = 'TRUE '.

  sound.fileName = "-1".

  Sound.AutoDetect = "TRUE".

  pciBridge0.present = 'TRUE '.

  pciBridge4.present = 'TRUE '.

  pciBridge4.virtualDev = "pcieRootPort"

  pciBridge4.functions = '8 '.

  pciBridge5.present = 'TRUE '.

  pciBridge5.virtualDev = "pcieRootPort"

  pciBridge5.functions = '8 '.

  pciBridge6.present = 'TRUE '.

  pciBridge6.virtualDev = "pcieRootPort"

  pciBridge6.functions = '8 '.

  pciBridge7.present = 'TRUE '.

  pciBridge7.virtualDev = "pcieRootPort"

  pciBridge7.functions = '8 '.

  vmci0. Present = 'TRUE '.

  hpet0. Present = 'TRUE '.

  usb.vbluetooth.startConnected = 'TRUE '.

  displayName = "set to LEVEL of Offsec-PWK/OSCP-VM"

  guestOS = "debian7."

  NVRAM = "started to LEVEL of Offsec-PWK_OSCP - VM.nvram"

  virtualHW.productCompatibility = "hosted".

  powerType.powerOff = 'soft '.

  powerType.powerOn = 'soft '.

  powerType.suspend = 'soft '.

  powerType.reset = 'soft '.

  extendedConfigFile = 'putting to LEVEL of Offsec-PWK_OSCP - VM.vmxf'

  tools.syncTime = "TRUE".

  vmx.buildType = "release".

  Replay.Supported = "FALSE".

  Replay.FileName = «»

  scsi0:0. Redo = «»

  pciBridge0.pciSlotNumber = "17".

  pciBridge4.pciSlotNumber = "21".

  pciBridge5.pciSlotNumber = "22".

  pciBridge6.pciSlotNumber = "23".

  pciBridge7.pciSlotNumber = "24".

  scsi0.pciSlotNumber = "16".

  usb.pciSlotNumber = "32".

  ethernet0.pciSlotNumber = "33".

  sound.pciSlotNumber = "34".

  vmci0.pciSlotNumber = '36 '.

  vmci0.ID = "-279022975".

  Monitor.phys_bits_used = "40".

  vmotion.checkpointFBSize = "33554432.

  cleanShutdown = 'TRUE '.

  softPowerOff = "FALSE".

  USB:1.speed = '2 '.

  USB:1.present = 'TRUE '.

  USB:1.DeviceType = "hub".

  USB:1.port = "1".

  USB:1.parent = "-1".

  IDE1:0.startConnected = "FALSE".

  tools.remindInstall = "FALSE".

  toolsInstallManager.updateCounter = '3 '.

  unity.wasCapable = 'TRUE '.

  checkpoint.vmState = "UPDATE Offsec-PWK_OSCP-VM - 93ee6071.vmss.

  gui.exitOnCLIHLT = 'TRUE '.

  IDE1:0. AutoDetect = 'TRUE '.

  gui.lastPoweredViewMode = "full screen".

  checkpoint.vmState.readOnly = "FALSE".

  VC. UUID = «»

  Policy.VM.mvmtid = «»

  rollingTier0.uid = '1 '.

  rollingTier0.interval = '86400 '.

  rollingTier0.maximum = '1 '.

  rollingTier0.live = 'TRUE '.

  rollingTier0.clientFlags = '8 '.

  rollingTier0.displayName = "AutoProtect" instant

  rollingTier1.uid = '2 '.

  rollingTier1.interval = '604800.

  rollingTier1.baseTier = '1 '.

  rollingTier1.baseTierInterval = "7".

  rollingTier1.maximum = '1 '.

  rollingTier1.live = 'TRUE '.

  rollingTier1.clientFlags = '8 '.

  rollingTier1.displayName = "AutoProtect" instant

  rollingTier2.uid = '3 '.

  rollingTier2.interval = "2419200.

  rollingTier2.baseTier = '1 '.

  rollingTier2.baseTierInterval = "28".

  rollingTier2.maximum = '1 '.

  rollingTier2.live = 'TRUE '.

  rollingTier2.clientFlags = '8 '.

  rollingTier2.displayName = "AutoProtect" instant

  snapshot.numRollingTiers = '3 '.

  rollingTier0.timeSincelast = "57623.

  rollingTier1.timeSincelast = "144057".

  rollingTier2.timeSincelast = "2026056".

  USB:0. Present = 'TRUE '.

  USB:0. DeviceType = 'hidden '.

  USB:0.port = "0".

  USB:0.parent = "-1".

  rollingTier1.baseTierSnapshotCount = '1 '.

  rollingTier2.baseTierSnapshotCount = "23".

  Serial0.present = "FALSE".

  floppy0. Present = "FALSE".

  Hello
  3 of these missing parts may contain a few Mbs 6Gbs or up to.
  If durinmg time you have written actively in these 3 files your Debian update grub and installed a new initrd, you will have a serious problem.
  But you used the autodestructible function I guess rather than these VMDK was rather smaller than completely filled.

  Get the virtual machine to start again is actually quite easy - write instructions to security however means more work.

  So, I think that setting remotely should not take much longer than 15 minutes. If you want to call me by Skype, so that we can arrange something.

  At the moment I don't have time to write a good howto...

  Ulli

• Need help with the IP configuration on vm ware for the installation of 11 GR 2 on linux vmware 6 on win7

  Need help with the ip configuration on/etc/hosts for the installation of 11 GR 2 on linux vmware 6 on win7.

  Let me know if you need more info... in fact I have a setting error while installation said

  -(/ etc/hosts has no correct entry for the host name)

  Host: 192.168.85.100

  Win7 ip: 192.168.1.x

  Thank you...

  (host computer)

  Win7 64 bit

  (vmware)

  Oracle Linux Server 6.3 version

  Release of Red Hat Enterprise Linux Server 6.3 (Santiago)

  Oracle Linux Server 6.3 version

  -(/ etc/hosts has no correct entry for the host name)

  Then post your/etc/hosts.

  Host: 192.168.85.100

  Win7 ip: 192.168.1.x

  Why 85? have you tried 192.168.1.100?

• Display with VMware Workstation 9 and Enterprise of Windows 8 comments bug

  Hello

  I just installed VMware Workstation 9.

  I created and installed a VM of Windows 8 Enterprise comments.

  Everything works fine, except that when I go to the Windows 8 settings via bar charm (not via the desktop...), the display setting menu is occasionally screwed up!

  This problem appeared just after I installed the VMware Tools in the guest OS. Before that, there was no display problem. Believe me, I've taken care of that by testing entirely.

  My OS is Windows 7 Ultimate. My processor is an Intel Core i7 870 (4 cores) and I have 8 GB of memory. My graphics card is an AMD ATI 5850 with the latest drivers.

  Any help would be greatly appreciated!

  PS: This is not one type of bug in time. I can repeat this every time I have to create a virtual machine Windows 8 Enterprise comments. The problem was also there with VMware Workstation 8. My guess is that VMware tools are buggy, at least with certain type of graphics compared to Windows 8...

  Hodgepodge

  Looks like you see the same problem that has been reported in this thread: http://communities.vmware.com/message/2124359

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• I'm suddenly needing help with my browser Firefox (6.0.2)

  Hello
  I'm suddenly needing help with my browser Firefox (6.0.2)

  (OS: I use Windows XP).

  When I open the browser, I don't see is a totally white screen of white, with all the toolbars at the top.

  I know that my physical connections are very good: I have tested the modem, turned the pc market etc and I can also receive/send emails.

  This problem started today, September 8, 2011 and has never happened before.

  Is it a coincidence that Firefox itself to day before I disconnected yesterday evening? Could this be something to do with this particular new update?

  I also noticed that just before I "opened" Firefox, I now get a small box indicating:

  [JAVASCRIPT APPLICATION]
  Handl exc in Ev: TypeError: this oRoot.enable is not a function

  This never appeared before - I hope that it offers a clue has what is wrong.

  The browser not be stuck in Mode safe, said by the way.

  Of course, I can't find solutions to the problem on the internet, I don't physically see all Web sites!
  (A friend sends this request in my name from their pc)

  Any light you can throw on this problem of confusion would be much appreciated. I'd rather not have to uninstall and reinstall Firefox if possible.

  If the only option is to uninstall Firefox and reinstall from your site, I'm also in trouble (I can not see the internet or download).
  In this case, would you be able to send the .exe file as an attachment to my e-mail address? In the affirmative, please let me know and I'll give you more details.

  Thanks in advance.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• Need help with installation on Photosmart C7280 all-in-one

  I had my printer is installed and has been using the printer for 3 wireless laptops in my house.  Now, I can't even find my backup drive, so I have need help with downloading the software to use my printer and also get to use wireless.   I don't know what happened, but the fax for this printer is listed, but not the printer itself.   Help, please!

  Click here to download the software for your printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3204785 & LC = on & CC = US & DLC = in & lang = to & CC = US

  has chosen the appropriate operating system that corresponds to your computer and download the full software features.

• HP laptop: need help with internet and search for things

  whenever I'm on chrome internet explore google ect and go to tab it is says unknown error or no internet connection or anything and just takes me chrome ect. I need help with this im involved in a byod class and my computer won't let me on what whatever usually it just starts out black and white and the seeds I my search request

  Yes it's a Windows 10 and it arrived already installed I'll take the other info now

• Need help with the installation of an adapter of Palit GeForce 9500GT Super chart - 512 MB in a M2N68 (narrated

  Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.

  Hello

  The link below is a guige to install a video card in your Pc.  In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below.  If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.

  http://support.HP.com/us-en/document/c01700855

  Kind regards

  DP - K

• need help with my window is in thai and I do not understand to all.how to convert to English?

  need help with my window is in thai and I don't quite understand.
  How to convert to English? I tried for days but still it cannot be changed.
  because I can't read thai... Please help me step by step...

  my pc is touchsmart 9100 windows 7 Professional.

  Not a single word is in English if I go to the "region and language" to change.

  Everthing is in thai in the system.

  Hello

  Where have you bought the PC?

  What is the operating system installed?

  Best regards

  ERICO

• I need help with an installation failure to interpret and troubleshoot a Setup log.

  Background: A few years ago, many editors of cinema used Final Cut Pro 6 (also contained in Final Cut Studio 2) for their editing projects.  Shared Apple Final Cut X uses a different format that is not compatible with FCP6.  Sometimes, these editors are called to work on a few historical projects that have been published in FCP6 and need this version to run now.

  Starting with OS X Lion, FCP6 would install not in Lion and thereafter.

  According research by Jeremy Johnston as noted on his blog, he discovered that Apple has inserted a file in the folder CoreServices in the Library folder of the system folder that causes versions the version Final Cut Pro X (and other older Apple programs in the same situation) do not settle.  He suggested changes to this file that would seek to prevent interfering with the installation of FCP6 in Lion, many users of final cut PRO 6 were successful in their efforts to install in Lion and work with it.

  Later in a discussion update on installing FCP6 in Mavericks, HawaiianHippie determined that the simplest way to perform the installation of FCP6 was simply copy this file and remove it from the system folder, install FCP6 and then restore the copied file:

  https://discussions.Apple.com/message/26309669#26309669

  I used this method with success to install FCS2 in Yosemite:

  

  [click on images to enlarge]

  However, in my attempts to install FCS2 in El Capitan, it fails in the last 5% to install the first DVD:

  

  

  First of all, I need advice on how to display an extremely large Setup log in this thread (on MacRumors, it is a method to insert a 'code' in a small box that can be the object of a scrollbar if necessary to read all along).  I am unable to find such a method to post here.

  Then once approved, I need help to determine which component is causing the installation to fail and perhaps this element can be omitted from the installation:

  

  If this element is not required, then maybe FCP6 can be installed successfully without it.  And if that omitted element is necessary, perhaps a manual method to install it can be determined by pacifists.

  It is my goal to help those who need to install and use FCP6 on their new Macs running El Capitan.

  Here is the post on MacRumors with pre-installed Setup log:

  http://forums.MacRumors.com/threads/i-need-help-with-an-installation-failure-to-interpret-and-troubleshoot-an-Installer-log.1954786/#post-22541389

• Need help with the port forwarding for a XBox remote Streaming

  I have a router R6200v2 and need help with port forwarding.

  I came across this set of instructions for setting up stream port forwarding XBox remotely from anywhere

  http://kinkeadtech.com/2015/07/how-to-stream-Xbox-one-to-Windows-10-from-anywhere-with-Internet/

  I have no idea when it comes to such things and I want to make sure I do it correctly without messing up my existing home network.

  Port Forwarding and triggering Port pages setup look very different from what the guy uses. Can someone walk me through what I do to set up please?

  Hi @varxtis,

  You must enter them in the field for a start external Port and external completion Port. You will need to send individually except for the range of 49000-65000. The steps are as follows.

  1. create a Service name (it could be something else that you cannot use the same service name twice. Ex. XBOX1, XBOX2 and so forth.)

  2. Select the type of service (TCP, UDP or both)

  3 entry 5050 times a start external Port and external endpoints.

  4. Select the IP address of your XBOX.

  5. Select apply.

  6 do the same for other port numbers. To the beach, use 49000 for the external departure Port and for the external completion Port 65000.

  Kind regards

  Dexter

  The community team

• Need help with network home using Airport extreme

  I need help with my home network.  I'm not very aware when it comes to all things network.  Here's how my network is currently set up.

  Cable modem to Airport Extreme for Gigabit Switch.  Cables come out of the switch to all areas of the House.  I have 2 other extreme airport connected in other rooms of the House directly on the wall that dates back to the switch.  I hope I am explaining that properly.

  My problem is that this seems to have caused some of my connections cable does not work.  When everything is configured, it has worked well.  All connections in the House worked.  Then we have disconnected one of the extreme airport and moved to another location in the House to have the best wifi coverage.  Since that time, a lot of the ethernet wall plugs are not working.  For example, when I plug in my Macbook Pro in making ethernet in my kitchen, it says connected but it has an assigned ip address and cannot connect to the internet.

  Any help you can provide would be great.

  I would like to get the return tech to help you to...

  But it is likely that something (or someone) has tampered with the settings.

  The layout is fine... but you can cause problems with the network by creating a loop.

  This can happen because the AE you moved is connected wrongly... somewhere in the network it is connected to the switch again.

  Or AE is set to expand wireless... It's FAKE... It will loop the network on the back main EI wireless.

  Unplug the two AE you have that function as extensions...

  Turning off everything else... then it works again...

  Do it in this order.

  Modem... Wait 2 min

  AE... Wait 2 min

  Switch.

  Now check that the network is working properly... power of customers in various locations and make sure everything is good.

  If so, then manually reset the two AE of factory and redo their installation.

• Need help with my Y40-80? power management

  I get message to the center of the Action as follows:

  Compatibility problem between your power management system and Windows

  Your power management system is not compatible with this version of Windows.

  The name of the model of your power management system is ACPI Lenovo compatible virtual controller.

  Can anyone help please. I have windows running Y40-80 8.1 is a clean install of windows 8.1 x 64 all drivers are up to this day, just need help with the question above thank you

  Lenovo today released a new bios update for Y40-80 laptops, I did the update and, so far, the error message that I posted above has not appeared again so set the mite of update of the bios not sure yet, I'll keep up to date on this subject and write again soon