Similar Questions

• How to remove an old topic that comes up constantly in the only printed Documentation output?

  When I generate Documentation printed in my project, I get this error around a topic that I have deleted several days ago and prevent the chapter being created in Word output.

  

  When I go to the section for the printed Documentation configuration screens, she appears as being missing. There is no way to delete the topic while in this form.

  

  The theme/html file no longer in my project. I deleted the subject through the HR interface (as opposed to just delete in Windows). I have no broken links, and WebHelp output generates very well.

  Is there some file HR, I can edit in Notepad which will delete this topic one?

  Just realized you hear this arrow - that did the trick!

  

• According to this that KNOCK printed Documentation generates a Word document

  Hi all

  According to this that KNOCK "Printed material" generates a Word document?

  It is not exactly according to the table of contents, I created for HTML Help. For example, it takes a subject here and there that I did not put in the table of contents, and anyway it's there even in the printed documentation.

  TIA

  -avi

  See printing on my site.

  When you create a print layout, HR takes the TOC no matter what you select by default. If you don't have a TOC, obviously to that. You can then accept it or amend it, but later, the two are are more synchronized. Change the table of contents and the print layout will not change.

  What you can do, because the TOC Editor is easier to work, is to go in the page mode and use the buttons to remove the previous provision and insert the table of contents was updated.

  See www.grainge.org for creating tips and RoboHelp

• Failure of the generation of message of printed documentation

  Here is the full message:
  
  Result: Unable to generate printed documentation. Please see message of compilation for more details.
  Click OK to return.
  
  I don't know what the message of the compilation. (The only options it gives me are OK) 1 and 2) support. When I click on help need me on the FAQ page to generate in the RoboHelp help file.
  
  I've been creating documents printed two years without seeing this message. Then she appeared the other day and now it does whenever I try to create printed documents. I have not changed the process I do with subjects.
  
  I searched through this forum and help from RoboHelp HTML. Thank you!

  Checklist given over time.

  1] you use RHX5 with Word 2002.

  [2] RHX5 has applied patches. http://www.Adobe.com/support/RoboHelp/downloads.html

  [3] your security setting is medium.

  [4] you looked at Issues of impression on my site? Please specify what are those who have tried and with what results.

  [5] your logon has admin rights attached.

  [6] your project is not encrypted upward in Program Files but is elsewhere on your hard disk and that you generate on your hard drive.

• Printed Documentation error: parameter is incorrect

  With the help of HTML HR 6. Tried to open the dialog box printed Documentation to revise certain parameters. Just by selecting the option, not a double-click, causes "Invalid parameter" error message to display. Clicking Ok does not make the message disappears. To finish the process in the Task Manager and restart HR to work on the project. The only recent change has been that we have deleted Adobe Acrobat 6 and installed Adobe Acrobat 7 Elements since the RH6 CD, because Acrobat 6 is no longer create bookmarks and TOC links, even if the options were chosen.

  Peter, thank you very much for the quick response AND SOLUTION. Deleting the PSS file was found in the code snippet the answer just to save others research.

  I'm not sure what we'd do without this forum and tons of your site and others provide useful information. I probably need to start making your site and the places of the first robowizard site that I turn to, then on this forum.

  Kind regards

  Joe

• Positions lost in the printed documentation

  Today, I tried to generate printed documentation.
  We put our real estate topic of subject titles and use the MyTitle < /title > < title > tag to show this change as a topic title.
  If I generate a Word document, these titles get lost somehow.
  
  Does anyone know how to fix this?
  
  MS Vista 32 bit
  MS Word 2007
  7.02 RoboHelp

  I found the way.

  In your topic, RoboHelp, or model of the section insert this code:

  
  

  MyTitle

  
  

  This automatically inserts the title of the topic of the subject properties in the RoboHelp topic and it is exported to Word, due to the

  Tag,

• C5280: "REFER TO PRINTER DOCUMENTATION".

  My black print cartridge ran out of ink, I went to a local store and filled...
  But now that im putting in the cartridge, the warningsign of the printer is flashing and display saying "Refer to printer documentation"... I don't get it... it must have something to do with the cartridge since it's the only thing that changed... but it's ALWAYS the same cartridge? did not get a new or a wrong or no matter what... Please help... tried everything, put in, turing, out, reconnected machince etc... nothing works... printer is just locked...

  Replace the cartridge with a genuine HP cartridge to see if it solves your problem. If so, your refill cartridge has been damage and you need to get a refund.

• HP officejet 6500 general printer error error (bed 0 x 61011) refer to the printer documentation

  My HP 6500 office jet suddenly decided to not print and gives me the following message is displayed:

  "error error general printer (bed 0 x 61011) refer to the printer documentation" I have no idea what this means, and don't know how to fix it. Can someone help me? Puleeese?

  Usually the 0 x 6 * point of errors to a carriage jam on the printer.  I will need to know the exact model of the 6500 Series printer you have to point you to the right measures to clear up this problem.  You have the model E709a, E709n, E710a or E710n of the 6500 Series?

• HP PHOTOSMART C5280 "Message of ERROR" print CARTRIDGES, refer to the PRINTER DOCUMENTATION

  My HP Photosmart C5280 All in one will not print.

  It has a flashing orange sign.

  It displays "Print cartridges refer to printer documentation".

  It was working fine yesterday and then just stopped. The cartridges were unchanged.

  Cannot find anything on this problem in the Basic Guide.

  Have printer is off and unplugged but WARNING reappears when returned to service.

  All possible solutions would be appreciated.

  Hi Hallam123456789,

  I see that you are having problems with your printer.  I'll take a look at the document below.

  Incompatible cartridges

  Let me know how it goes.

• What is the 0x610000f6 printer documentation? cc = us

  6500 a 710n

  win xp

  There is a problem with the printer. see the ot 0x610000f6 printer documentation

  No changes to the system.

  There is a paper jam, which was authorized. Printer status also indicates that there is no connection 2-way.

  Thank you

  Martin,

  This article should help to resolve the error you get:
  http://support.HP.com/us-en/document/c03081973

  Try the steps and tell us if it helps.

  Good luck!

• RoboHelp 2015: VBA for Word recorded The macro Version is incorrect. Please reinstall printed Documentation.

  I am trying to create a PDF output for my WebHelp project. I get this error message:

  The registered version of VBA for Word macro is incorrect.

  Please reinstall printed Documentation.

  I search for RoboHelp 2015 online help and the forum and cannot find an answer. I searched Word help as well with no luck.

  How to upgrade the version of VBA macro in Word?

  Thank you

  MDawn

  Search of printed Documentation of RoboHelp forum. Sure you want

  He finds.

• All-in-one HP Photosmart C5280. You get an error message... Refer to the printer documentation

  You get an error message... Refer to the printer documentation

  Can you estimate the level of ink in its entirety for each cartridge, by looking at the gauge of printer ink?  See step 3

  Have you recently had a paper jam?

• table of contents printed documentation has elements out of order

  When I print a pdf document by using the printed Documentation option, some of the elements in the table of contents are out of use; the list of projects and the Table of contents are identical.

  Any ideas?

  Thank you

  No,

  Never mind... figured it out.

• Placeholders (breadcrumbs, Mini-TOCs) doesn't show not in printed Documentation

  I have included placeholders (bread crumbs and mini-table of contents) in Master Pages. They work as expected for the release of HTMLHelp, but when I generate printed Documentation (.doc), they are not there.

  I checked for if sure I have not has not accidentally assign a condition online only (I have not).

  I use RoboHelp 9 (RH9). I have to do something special?  I just tried applying specific printing condition to bread in the foot and using this condition when generating, but that did not help.

  You get bread crumbs or mini tables of contents in the printed documentation.

  I have not seen the absence of bread crumbs as a problem because they are simply a way to navigate on the screen and would be of no use in print. Mini Tocs however describe what is in this 'chapter' and should be included.

  The more people who report a bug or request a feature, more likely, he will be executed. Please follow this link.

  http://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform&product=38

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• Duplicate the topics in the printed Documentation

  I get a lot of duplicate in my printed documentation topics. I have a list of topics with no books that might be responsible. I generate a single document. Suggestions?
  
  KFC

  The date on the model file is 10/04/2003. Curious and curious. In any case, I get the result I want by manually attaching another model after generating the printed doc, so I think my immediate problem is resolved. I will restore the map style backup template once I offer this goal. Thanks again!