subsubsystem of closed spooler

I tried to print a photo under copyright & foreign pc lashed out & shot down my "Spooler subsystem. How can I return to work? I have Windows Vista & a Lexmark printer (3 months old). I am not pc literate. I don't know know to sign as an administrator, even though I see that I am the administrator for my pc 1 & only.

This Spooler subsystem has to do with more of my printer. I only could see the 1/2 of an adobe document. I was not allowed to delete cookies or defrag my pc.

In addition, they told me a rumor & I wonder if it's true. I have a pc HP & had a HP printer until it broke down. I was told that I will have problems over & over until I buy a new pc because of the mismatch. This small seeems & who would care?

Thank you!

Diana

Hi Diana,

You can try the following steps and check.

Step 1:

You can try to start the fixit printer and check.

http://support.Microsoft.com/mats/printing_problems/

Step 2:

Remove the printer and driver of spool files

To do so, start Microsoft Windows Explorer, and then delete all files and folders in the following two folders.

C:\Windows\System32\Spool\Printers

C:\Windows\System32\Spool\Drivers\w32x86

You can check out the following link and check if it helps:

Printer in Windows problems

Hope this information is useful.

Tags: Windows

Similar Questions

  • Office has stopped working and was closed Spooler subsystem app stopped working

    I recently knew of theses errors that appear after windows vista starts, then a few minutes my computer laptop hungs up on top of me. I run the sfc/scannow, and I got some corrupted files. What should I do next?

    2012 01-03 08:04:31, info CSI 00000101 [SR] cannot repair the military record [l:40 {20}] "WcsPlugInService.dll" Microsoft-Windows-ICM-Base, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2012 01-03 08:04:33, info CSI 00000103 [SR] cannot repair the military record [l:40 {20}] "WcsPlugInService.dll" Microsoft-Windows-ICM-Base, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2012-01-03 08:04:33, info CSI 00000104 [SR] this element is referenced by [l:160 {80}] "" Package_25_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 113_neutral_GDR ""
    2012 01-03 08:04:33, info CSI 00000107 [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:40{20}]"WcsPlugInService.dll '; source file in the store is also corrupted
    2012-01-03 08:04:34, Info CSI 00000109 [SR] full check
    2012-01-03 08:05:01, CSI Info 0000011 c [SR] beginning verify and repair operation
    2012-01-03 08:05:02, CSI Info 0000011e [SR] cannot repair the military record [l:32 {16}] "netmscli.inf_loc" Microsoft-Windows-MSCLIENT-netmscli - pro.Resources, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2012 01-03 08:05:06, info CSI 00000120 [SR] cannot repair the military record [l:32 {16}] "netmscli.inf_loc" Microsoft-Windows-MSCLIENT-netmscli - pro.Resources, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    ' 2012-01-03 08:05:06, info CSI 00000121 [SR] this component was referenced by [l:262{131}]"Microsoft-Windows-WindowsFoundation-LanguagePack-Package~31bf3856ad364e35~x86~en-US~6.0.6000.16386.Windows Foundation Language Pack.
    2012 01-03 08:05:06, info CSI 00000124 [SR] could not reproject corrupted file [ml:520 {260}, l:82 {41}] '------? \C:\Windows\System32\driverstore\en-us"\[l:32{16}]"netmscli.inf_loc '; source file in the store is also corrupted
    2012 01-03 08:05:07, info CSI 00000126 [SR] verification complete
    2012-01-03 08:06:12, CSI 0000015e [SR] Info components check 100 (0 x 00000064)
    2012-01-03 08:06:12, CSI Info 0000015f transaction [SR] beginning verify and repair
    2012-01-03 08:06:20, Info CSI 00000161 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2012-01-03 08:06:24, Info CSI 00000163 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2012-01-03 08:06:24, Info CSI 00000164 [SR] this element is referenced by [l:160 {80}] "' Package_30_for_KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000.936330 - 187_neutral_GDR" "
    2012 01-03 08:06:24, info CSI 00000167 [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------?
    ? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted
    2012-01-03 08:06:24, Info CSI 00000169 [SR] check complete
    2012-01-03 08:06:25, CSI Info 0000016 components [SR] a check 100 (0 x 00000064)
    2012-01-03 08:06:25, CSI Info 0000016b transaction [SR] beginning verify and repair
    2012 01-03 08:06:26, CSI Info 0000016 d [SR] cannot repair the military record [l:14 {7}] "wdc.dll" Microsoft-Windows-PerformanceToolsGui, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2012-01-03 08:06:32, CSI Info 0000016f [SR] cannot repair the military record [l:14 {7}] "wdc.dll" Microsoft-Windows-PerformanceToolsGui, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2012-01-03 08:06:32, info CSI 00000170 [SR] this element is referenced by [l:160 {80}] "" Package_25_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 113_neutral_GDR ""
    2012 01-03 08:06:32, info CSI 00000173 [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------?
    ? \C:\Windows\System32"\[l:14{7}]"wdc.dll '; source file in the store is also corrupted
    2012 01-03 08:06:33, info CSI 00000175 [SR] verification complete
    2012-01-03 08:06:33, info CSI 00000176 [SR] components check 100 (0 x 00000064)
    2012-01-03 08:06:33, transaction Info CSI 00000177 [SR] beginning verify and repair
    2012-01-03 08:06:40, CSI Info 0000017a Verify [SR] full
    2012-01-03 08:06:40, CSI Info 0000017 components [SR] b check 100 (0 x 00000064)
    2012-01-03 08:06:40, CSI Info 0000017 c [SR] beginning verify and repair operation
    2012-01-03 08:07:02, Info CSI 0000017e [SR] full Verify
    2012-01-03 08:07:03, CSI 0000017f [SR] components Info check 100 (0 x 00000064)
    2012-01-03 08:07:03, Info CSI 00000180 [SR] beginning verify and repair
    2012 01-03 08:07:17, info CSI 00000182 [SR] verification complete
    2012-01-03 08:07:17, info CSI 00000183 [SR] components check 100 (0 x 00000064)
    2012-01-03 08:07:17, transaction Info CSI 00000184 [SR] beginning verify and repair
    2012 01-03 08:07:28, info CSI 00000186 [SR] verification complete
    2012-01-03 08:07:28, info CSI 00000187 [SR] components check 100 (0 x 00000064)
    2012-01-03 08:07:28, transaction Info CSI 00000188 [SR] beginning verify and repair
    2012-01-03 08:07:43, CSI Info 0000018a Verify [SR] full
    2012-01-03 08:07:44, CSI Info 0000018 [SR] b components check 100 (0 x 00000064)
    2012-01-03 08:07:44, CSI Info 0000018 c [SR] beginning verify and repair operation
    2012-01-03 08:07:45, CSI Info 0000018e [SR] cannot repair the military record [l:22 {11}] "netserv.inf" Microsoft-Windows-SMBServer, Version = 6.0.6002.18306, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2012 01-03 08:07:45, info CSI 00000190 [SR] cannot repair the military record [l:22 {11}] "mgmtapi.dll" Microsoft-Windows-SNMP-Mgmt-API, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2012 01-03 08:07:50, info CSI 00000192 [SR] cannot repair the military record [l:22 {11}] "netserv.inf" Microsoft-Windows-SMBServer, Version = 6.0.6002.18306, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2012-01-03 08:07:50, info CSI 00000193 [SR] this element is referenced by [l:156 {78}] "' Package_76_for_KB2345886 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.1.2345886 - 314_neutral_GDR" "
    2012 01-03 08:07:50, info CSI 00000196 [SR] could not reproject corrupted file [ml:520 {260}, l:36 {18}] '------?
    ? \C:\Windows\Inf"\[l:22{11}]"Netserv.inf '; source file in the store is also corrupted
    2012 01-03 08:07:51, info CSI 00000198 [SR] cannot repair the military record [l:22 {11}] "mgmtapi.dll" Microsoft-Windows-SNMP-Mgmt-API, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2012-01-03 08:07:51, info CSI 00000199 [SR] this element is referenced by [ml:38 {19}, l:36 {18}] "Windows Foundation.
    2012 01-03 08:07:51, CSI Info 0000019 c [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------?
    ? \C:\Windows\System32"\[l:22{11}]"mgmtapi.dll '; source file in the store is also corrupted
    01/02/03 08:10:34, Info CSI 00000216 [SR] verification complete
    2012-01-03 08:10:34, Info CSI 00000217 [SR] repair 6 components
    2012-01-03 08:10:34, transaction Info CSI 00000218 [SR] beginning verify and repair
    2012-01-03 08:10:35, CSI Info 0000021a [SR] cannot repair the military record [l:40 {20}] "WcsPlugInService.dll" Microsoft-Windows-ICM-Base, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2012 01-03 08:10:35, Info CSI 0000021 c [SR] cannot repair the military record [l:32 {16}] "netmscli.inf_loc" Microsoft-Windows-MSCLIENT-netmscli - pro.Resources, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2012-01-03 08:10:35, CSI Info 0000021e [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2012-01-03 08:10:35, Info CSI 00000220 [SR] cannot repair the military record [l:14 {7}] "wdc.dll" Microsoft-Windows-PerformanceToolsGui, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2012-01-03 08:10:35, Info CSI 00000222 [SR] cannot repair the military record [l:22 {11}] "netserv.inf" Microsoft-Windows-SMBServer, Version = 6.0.6002.18306, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2012-01-03 08:10:35, Info CSI 00000224 [SR] cannot repair the military record [l:22 {11}] "mgmtapi.dll" Microsoft-Windows-SNMP-Mgmt-API, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2012-01-03 08:10:35, Info CSI 00000226 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2012-01-03 08:10:35, Info CSI 00000227 [SR] this element is referenced by [l:160 {80}] "' Package_30_for_KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000.936330 - 187_neutral_GDR" "
    2012-01-03 08:10:35, CSI Info 0000022a [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------?
    ? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted
    2012 01-03 08:10:35, Info CSI 0000022 c [SR] cannot repair the military record [l:40 {20}] "WcsPlugInService.dll" Microsoft-Windows-ICM-Base, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2012-01-03 08:10:35, Info CSI 0000022d [SR] this element is referenced by [l:160 {80}] "" Package_25_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 113_neutral_GDR ""
    2012-01-03 08:10:35, Info CSI 00000230 [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------?
    ? \C:\Windows\System32"\[l:40{20}]"WcsPlugInService.dll '; source file in the store is also corrupted
    2012-01-03 08:10:35, Info CSI 00000232 [SR] cannot repair the military record [l:14 {7}] "wdc.dll" Microsoft-Windows-PerformanceToolsGui, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2012-01-03 08:10:35, Info CSI 00000233 [SR] this element is referenced by [l:160 {80}] "" Package_25_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 113_neutral_GDR ""
    2012-01-03 08:10:35, Info CSI 00000236 [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:14{7}]"wdc.dll '; source file in the store is also corrupted
    2012-01-03 08:10:35, Info CSI 00000238 [SR] cannot repair the military record [l:32 {16}] "netmscli.inf_loc" Microsoft-Windows-MSCLIENT-netmscli - pro.Resources, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2012-01-03 08:10:35, 00000239 CSI Info [SR] this component was referenced by [l:262{131}]"Microsoft-Windows-WindowsFoundation-LanguagePack-Package~31bf3856ad364e35~x86~en-US~6.0.6000.16386.Windows Foundation Language Pack"
    2012 01-03 08:10:35, Info CSI 0000023 c [SR] could not reproject corrupted file [ml:520 {260}, l:82 {41}] '------? \C:\Windows\System32\driverstore\en-us"\[l:32{16}]"netmscli.inf_loc '; source file in the store is also corrupted
    2012-01-03 08:10:35, CSI Info 0000023e [SR] cannot repair the military record [l:22 {11}] "mgmtapi.dll" Microsoft-Windows-SNMP-Mgmt-API, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2012-01-03 08:10:35, CSI 0000023f [SR] Info this item is referenced by [ml:38 {19}, l:36 {18}] "Windows Foundation.
    2012-01-03 08:10:35, Info CSI 00000242 [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:22{11}]"mgmtapi.dll '; source file in the store is also corrupted
    2012-01-03 08:10:35, Info CSI 00000244 [SR] cannot repair the military record [l:22 {11}] "netserv.inf" Microsoft-Windows-SMBServer, Version = 6.0.6002.18306, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2012-01-03 08:10:35, Info CSI 00000245 [SR] this element is referenced by [l:156 {78}] "' Package_76_for_KB2345886 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.1.2345886 - 314_neutral_GDR" "
    2012-01-03 08:10:35, Info CSI 00000248 [SR] could not reproject corrupted file [ml:520 {260}, l:36 {18}] '------? \C:\Windows\Inf"\[l:22{11}]"Netserv.inf '; source file in the store is also corrupted
    2012 01-03 08:10:35, CSI Info 0000024 [SR] a repair complete
    2012-01-03 08:10:35, CSI Info 0000024b transaction Committing [SR]
    2012 01-03 08:10:35, Info CSI 0000024f [SR] check and complete repair operation. All of the files and registry keys listed in this operation were repaired successfully

    The question is not persistent in step 1 starting in safe mode

    In step 2, I stopped and unchecked below normal start-up services and I see error "Desktop has stopped working" but still get the "Spooler subsystem app stopped working." Is there a way to fix this?
    Adobe active file monitor v6
    Adobe Acrobat update service
    Andrea ST Filters Service
    Apple Mobile service
    Hello Servicevice
    Bluetooth service
    Cisco System, Inc. VPN service.
    Dock connection service
    Sandy Network Connect Service
    FLEXnet Licensing service
    GoToAssist
    Google update service
    Google Updater software
    The IPOD service
    McAfee Security Scan
    Remote packet Capture Protocol
    SolarWinds TFTp server
    SupportSoft sprocket service
    Check Point
    Audio service
    stllssvr
    TabletServicePen
    TeamViewer
    VMWare
    WDDMService
    WDRulesService
    VNC Server Version 4
    Dell Wireless WLAN Tray Service
    Yahoo update

  • Keep to spooler subsystem app error message.

     
    I get an error message which announces that windows are closed spool subsystem app for reasons of security sikke, all printers are removed from my computer and it is not possible to install new, Microsoft can fix or should I switch to mac computer where this problem does not occur

    Hi lille lt.

    1. What is the full error message that you receive?

    2. don't you make changes on your computer before this problem?

    3. when exactly you receive this error message?

    You can follow this link & check if the problem persists.

    You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."

    Hope the helps of information.
    Please post back and we do know.

  • That spooler SubSubsystem App has stopped working and was closed does mean?

    Spooler SubSystem App stopped working and was closed means.  I can't get my printer to print at all.  Not even a test page.

    Hello

    Check with the printer manufacturer for updated drivers and support for known issues.

    Check chan seen message here - one of the highest.

    fixed spooler subsystem app stopped working
    http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

    ===================================

    If the above didn't help:

    Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
    the latest driver).

    Check Mr. Fixits here and if you use the other methods go back and try again later.

    Problems of print and error - a Mr Fixit of printing
    http://support.Microsoft.com/GP/printing_problems

    Solve printer problems - a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

    ------------------------------------------------------
    Logon as administrator

    Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

    You can copy and paste each line except those brackets and press ENTER after each.

    net stop Spooler

    (echo suppression of all print jobs)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    del/q %SystemRoot%\system32\spool\printers\*.*

    net start Spooler

    (sound Done!)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    Another way
    http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

    Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
    http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

    If you use Control Panel - Classic - printers

    Try after unplugging your printer if necessary.
    -------------------------------------------------------------

    Also check the spooler print and its dependencies and addictions Service.

    The value of all Services back to their default values.

    Start - type into the search box-> Services find top - make a right click on - RUN
    AS AN ADMINISTRATOR

    BlackViper - for Vista SP1 - Services - all return to their default values.
    http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020

    BlackViper - for Vista SP2 - Services - all return to their default values.
    http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991

    How difficulty Windows Vista print spooler starts do not
    http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

    ------------------------------------------------------------

    Check this thread if necessary - to stop and erase the spooler

    http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

    and here
    http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

    ------------------------------------------------------
    Clean the General corruption and repair or replace the damaged/missing files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    CheckDisk (chkdsk) runs at startup.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Spooler subsystem app. has been closed to protect system

    I ran the program of Mr. fixit from microsoft site.  seemed to fix my printer, but my printer seems to work very well, came back, nothing wrong. whenever I turn on my computer I get this message even. Spooler subsystem App and had to protect close system, have no problem closing the message window.  Don't know if this is important or how to fix it.  Help!  Thank you

    Yes, I have Windows XP.  Well, when I boot message appears and I close the message and I have no problem printing.  The list of the icons in the "printers and faxes" are; HP deskjet 5600 series (and the checkbox), Microsoft XPS Document Writer, send to OneNote 2010.  I didn't know there is more than one "Mr. FixIt" program, I just followed a link that the error message was downloaded "Mats_Run.printing.exe" and opened it and keep running and it came to a point where he says that something like could not find no problem to solve.  Thanks for your help and your patience with my inexperience with this process; never been in the forum before.

    I have not seen a situation as you describe it.  Usually, when there is a problem and the spooler stops it stays down. Can you identify what happened before this problem occurred first?

    Do you use Microsoft OneNote?

    Go to printers and faxes

    Right-click on the icon for the DeskJet 5600, and then click Properties

    Click the Ports tab.

    Use the scroll bar and see if there is an entry named "send to Microsoft OneNote Port:" and, if so, if there is a check in the box for this line.

    Click Cancel to exit this dialog box.

    Do the same for the XPS Document Writer

    It might be interesting to check the programs that start automatically when you start Windows.  Download Autorunshttp://technet.microsoft.com/en-us/sysinternals/bb963902.aspx after Autoruns full analysis, as shown in the lower left corner, click the connection tab.  You'll probably at least three entries associated with HP.  Is there something else that seems to be related to printing or that looks like 'suspect' (I know that is vague; if you can't identify something, include its name in your response).

    Also take a look at the tab "print monitors.  You will probably "HP standard TCP/IP port" and perhaps "PCL hpz3143a.  There may also be a port entry Bluetooth printer here.  Anything else?

    Finally, if necessary, is listed under the tab "Winlogon".

  • Spooler subsystem app stopped working and was closed.

    When spooler subsystem app stopped working and was closed, which is causing this problem and how can I reinstall it and continue to use my computer, I installed a new program on my computer?

    Hello
     
    1. What is the name of the program you are trying to install?
     
    2. you receive an error code?
     
    3. what happens when you try to print?
     
     
    Please follow the links below to solve the problem.
     
    Method 1
     
    In Windows Vista:
     
    a. click on start
     
    b. click Control Panel, click programs and features,
     
    c. click on Turn Windows features on or off, expand Print Services, clear the LPR Port monitor check box and select the Internet printing Client, and then click OK.
     
    If the steps are still not then continue to.
     
    Method 2
     
    This problem may occur if a printer driver that is installed on the computer is damaged.
     
    Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 how to back up and restore the registry in Windows
    To resolve this issue, delete the printers and drivers for printers, then remove the items that are under certain keys in the registry. Follow these steps:
     
    a. If possible, remove all of the printers that are listed in the Printers window.
     
    To remove a printer, right-click the printer in the Printers window, click Remove, and then click Yes to confirm the deletion.

    (b) in the Printers window, on the file menu, click Server Properties.
     
    c. on the tab drivers, remove all the installed printer drivers.
     
    d. to remove a printer driver, click the driver, click Removeand then click Yes to confirm.

    Start the registry (Regedit.exe) editor.
     
    (e) export the following registry keys:
        HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Print
       
    HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Print
       
    f. remove all items listed under the following keys (do not delete the keys themselves):
        HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers\Version-2
        HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers\Version-3

    HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Print\Environments\Windows NT x86\Drivers\Version-2

    HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Print\Environments\Windows NT x86\Drivers\Version-3

    g. remove all items listed under the following keys by default:
        HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors
       
    HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Print\Monitors

    The list of default monitors includes:
    AppleTalk printing devices (when Services for Macintosh is installed)

    BJ language monitor
    The local port
    PJL language monitor
    Standard TCP/IP port
    USB Monitor
     

    "Windows NT Fax Monitor (if a Fax Modem is installed)"
     
    For more information on the items are not by default, click on the number below to view the article in the Microsoft Knowledge Base:
     

    h. remove all items listed under the following keys:
        HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers
       
    HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Print\Printers
    I. close the registry editor.
    J. restart your computer and reinstall the necessary printers.
     
    I hope this helps.
     
     

  • spooler under systrm app has stopped working and closed how to solve?

    Spooler subsystem does not and closed how to solve?

    Logon as administrator

    Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

    You can copy and paste each line except those brackets and press ENTER after each.

    net stop Spooler

    (echo suppression of all print jobs)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    del/q %SystemRoot%\system32\spool\printers\*.*

    net start Spooler

    (sound Done!)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    Another way
    http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

    Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
    http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

    If you use Control Panel - Classic - printers

    Try after unplugging your printer if necessary.

    Source

  • I got the error message "Spooler subsystem app stopped working and was closed".

    I got the error message "Spooler subsystem app stopped working and was closed" when I tried to print a large PDF file.  I can not load a printer now.  What is the next step?

    Hello

    You should probably check with Support from Adobe and their communities and Forums in case
    There are known problems.

    Adobe - Support
    http://www.Adobe.com/support/

    Adobe - communities
    http://www.Adobe.com/communities/

    Adobe - Forums
    http://forums.Adobe.com/index.jspa

    ====================================

    Check with the printer manufacturer for updated drivers and support for known issues.

    Check chan seen message here - one of the highest.

    fixed spooler subsystem app stopped working
    http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

    ===================================

    If the above didn't help:

    Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
    the latest driver).

    Check Mr. Fixits here and if you use the other methods go back and try again later.

    Problems of print and error - a Mr Fixit of printing
    http://support.Microsoft.com/GP/printing_problems

    Solve printer problems - a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

    ------------------------------------------------------
    Logon as administrator

    Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

    You can copy and paste each line except those brackets and press ENTER after each.

    net stop Spooler

    (echo suppression of all print jobs)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    del/q %SystemRoot%\system32\spool\printers\*.*

    net start Spooler

    (sound Done!)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    Another way
    http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

    Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
    http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

    If you use Control Panel - Classic - printers

    Try after unplugging your printer if necessary.
    -------------------------------------------------------------

    Also check the spooler print and its dependencies and addictions Service.

    The value of all Services back to their default values.

    Start - type into the search box-> Services find top - make a right click on - RUN
    AS AN ADMINISTRATOR

    BlackViper - for Vista SP1 - Services - all return to their default values.
    http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020

    BlackViper - for Vista SP2 - Services - all return to their default values.
    http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991

    How difficulty Windows Vista print spooler starts do not
    http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

    ------------------------------------------------------------

    Check this thread if necessary - to stop and erase the spooler

    http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

    and here
    http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

    ------------------------------------------------------
    Clean the General corruption and repair or replace the damaged/missing files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    CheckDisk (chkdsk) runs at startup.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Vista SP2 after installing Spooler SubSystem App stopped working and was closed

    After installing Vista SP 1 and 2 my printers no longer work. the message that I get when the computer is

    "Spooler SubSystem App stopped working and was closed. A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

    When I try to print it says I have to install a printer but then says turn the spooler.
    After turning on the spooler spooler turns his back on the coast.
    I tried to uninstall and reinstall printers, but it won't let me install printers.
    If I restore to previous date before installing SP1 and 2 printers work.

    Online, I see that many people have the same problem.
    I tried to contact Microsft but they tell me to contact HP
    and when I contact HP they tell me to contact Microsoft, as it was their problem
    I'm agree that Microsoft SP1 and 2 caused this problem.

    Hello Lonny Jones,

    Let's start by downloading the latest drivers and software from HP and see if that helps.

    When you install the drivers, it is important to perform the following actions:

    1. remove the printer from the PC.

    2 uninstall the printer from the PC driver.

    3 reinstall the printer driver.

    4 reinstall the printer.

    Several references to printer:

    Open the printer Troubleshooter

    http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

    Why can I not print?

    http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

    Find and install printer drivers

    http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  • ((1) spool working.2 printing service) Data not closed execution prevention - Spooler Subsystem App 3) implemented the pilot installation error

    Coil service does not print. Data Execution Prevention - to help protect your computer, windows has closed this program - Spooler Subsystem App - someone on the internet recommended to enter advanced system settings and by setting an exception on the spooler subsystem app - doesn't work always no - UN installed & reinstalled the driver printer Samsung ML-3050 a million times - get an error message - implement the program has encountered an error in the installation ML3050 - icons do not appear in the printers and Faxes folder. HELP, HELP, I'm GOING CRAZYemember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    More happy salvation,

    1. were you able to use the printer before without any problem?

    2. when the problem started?

    3. you remember to make changes to the computer before this problem?

    You can check out the following link and try the steps suggested by Robinson Zhang Microsoft, Moderator Monday, July 28, 2008 07:15 and check if it helps.

    http://social.technet.Microsoft.com/forums/en-us/itprovistaprinting/thread/bd60598a-F3B6-4858-8887-e98e7da4a04a/

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Error message: SubsystemApp spooler has stopped working and was closed

    Problem is with printer Epson EPL5900L laser which is not compatible with Vista. Found advice on forum Epson use XP driver and it should work, but try the message received the error "Spooler SubsystemApp has stopped working and was closed".

    Drivers XP crashed the spooler service is provides printing functionality.  Use a Vista / 7 compatible printer. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • Microsoft Windows Spooler SubSystem App stopped working and was closed, rises whenever I starts and sometimes my printer driver or the printer disappear!

    Whenever I start my computer when desktop comes up, I get this msg from Microsoft Windows: Spooler subsystem App stopped working and was closed. Most of the time I can still print but occasionally (when I need to print) my printer is missing, and the driver is not installed it is said. I got my printer mfg reinstall constantly for the last 2 weeks because of this problem! Peut anyonehelp!

    Try this:

    http://support.Microsoft.com/GP/printing_problems

  • ' Spooler Sub System App stopped working and was closed "__MS Vista Home Premium with SP2, 4 GB of RAM & 32 bit OS.

    ' Spooler Sub System App stopped working and was closed ".
    MS Vista Home Premium with SP2, 4 GB of RAM & 32 bit OS

    Hello

    Check chan seen message here - one of the highest.

    fixed spooler subsystem app stopped working
    http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

    ===================================

    If the above didn't help:

    Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
    the latest driver).

    Check Mr. Fixits here and if you use the other methods go back and try again later.

    Problems of print and error - a Mr Fixit of printing
    http://support.Microsoft.com/GP/printing_problems

    Solve printer problems - a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

    ------------------------------------------------------
    Logon as administrator

    Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

    You can copy and paste each line except those brackets and press ENTER after each.

    net stop Spooler

    (echo suppression of all print jobs)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    del/q %SystemRoot%\system32\spool\printers\*.*

    net start Spooler

    (sound Done!)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    Another way
    http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

    Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
    http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

    If you use Control Panel - Classic - printers

    Try after unplugging your printer if necessary.
    -------------------------------------------------------------

    Also check the spooler print and its dependencies and addictions Service.

    Print Spooler service
    http://www.blackviper.com/WinVista/services/Print_Spooler.htm

    How difficulty Windows Vista print spooler starts do not
    http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

    ------------------------------------------------------------

    Check this thread if necessary - to stop and erase the spooler

    http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

    and here
    http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

    ------------------------------------------------------
    Clean the General corruption and repair or replace the damaged/missing files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    CheckDisk (chkdsk) runs at startup.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Spooler subsystem stopped working and was closed

    Spooler subsystem app work in mind and was closed

    Hi ploegske,

    This problem may be caused because the LDP port is disabled. Here is the solution:

    1. go in programs and features in Control Panel > on features Windows turn on or off

    2. click on + sign of printing services

    3. Select LPD and LPR. You must remove the Internet printing Client. > restart your PC to ensure there is no error in the spooler service.

    4. Add once again your printer driver.

    Hope this helps,

    Steve <> Microsoft Partner

  • Spooler subsystem stopped and closed

    Spooler subsystem works correctly and closed

    Hello

    Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
    the latest driver).

    Check Mr. Fixits here and if you use the other methods go back and try again later.

    Problems of print and error - a Mr Fixit of printing
    http://support.Microsoft.com/GP/printing_problems

    Solve printer problems - a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

    ------------------------------------------------------
    Logon as administrator

    Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

    You can copy and paste each line except those brackets and press ENTER after each.

    net stop Spooler

    (echo suppression of all print jobs)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    del/q %SystemRoot%\system32\spool\printers\*.*

    net start Spooler

    (sound Done!)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    Another way
    http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

    Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
    http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

    If you use Control Panel - Classic - printers

    Try after unplugging your printer if necessary.
    -------------------------------------------------------------

    Also check the spooler print and its dependencies and addictions Service.

    Print Spooler service
    http://www.blackviper.com/WinVista/services/Print_Spooler.htm

    How difficulty Windows Vista print spooler starts do not
    http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

    ------------------------------------------------------------

    Check this thread if necessary - to stop and erase the spooler

    http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

    and here
    http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

    ------------------------------------------------------
    Clean the General corruption and repair or replace the damaged/missing files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    CheckDisk (chkdsk) runs at startup.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

Maybe you are looking for