Office has stopped working and was closed Spooler subsystem app stopped working
I recently knew of theses errors that appear after windows vista starts, then a few minutes my computer laptop hungs up on top of me. I run the sfc/scannow, and I got some corrupted files. What should I do next?
The question is not persistent in step 1 starting in safe mode
Tags: Windows
Similar Questions
-
Bing desktop app has stopped working and was closed
Whenever I start my computer, I get the message boot up 'Bing Applicatoin Office ceased to operate and was closed. I still see as a Bing backgroung page updated, but bing entry window disappears and is closed.
I don't know what to do to solve this problem, but to uninstall this app buggy and a replacement product.
Any ideas?This only adds to the other Microsoft issues of my I. E. Explorer 9 constantly generating a message "XXXy (website) has stopped responding relatives or retrieve web page.
Hi Alex,
Thanks for the reply.
Please uninstall and reinstall IE9.
How to install or uninstall Internet Explorer 9?
http://Windows.Microsoft.com/en-us/Windows7/how-do-i-install-or-uninstall-Internet-Explorer-9
Post back with the result.
-
Spooler subsystem app has encountered a problem.
HP Laserjet 1020 printer does not work. Have used this printer for years. Last print job has stopped the printing process and give the spooler subsystem app has encountered a problem error message.
Used Mr. Fixit. Have the print spooler service manually restarted and the RPC service. When I try to print, Spooler Subsystem App Error message appears and printer spooler stops,
OS is XP Home Edition Service Pack 3.
Cannot remove hardware HP Laserjet 1020 and reload HP Laserjet 1020 download did not fix problem.
Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver. However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:
AntiMailware MalwareBytes
SUPERAntiSpywareDo not operate the two scans simultaneously. Each will take a long time, so start it and then go do something else for a while.
Cleaning of printers
NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article". Use of the special procedure for printers Lexmark described below and follow in its first Article. If still no joy, use the alternative method that is linked below.
A. Clean on print jobs pending
- Open a command prompt window (start > run > cmd > OK)
- Type the following in the black command prompt window, and then press ENTER after each line
net stop spooler
del/q '% windir%\system32\spool\PRINTERS\*.* '.
net start spooler
outputB. clean the old printer drivers and install the latest drivers by using the directions in One Article.
A special procedure for computers that have or had a Lexmark or Dell-badged Lexmark printer.
Open a command prompt window (start > run > cmd > OK)
Type the following in the black command prompt window and press enter
dependent on the spooler of sc config = RPCSS
outputNote that there is no space before the =
If you want to use a Lexmark or Dell-badged Lexmark printer after having done the above, you will need to reinstall it.
Alternative to the method of his first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm
Use of SuperAntiSpyWare found two serious problems. Could cross printer of pending work. Printer works fine. Thanks for your reply and advice.
Best regards
-
Error message Spooler SubSystem App
Hi - my computer has received an automatic update from Microsoft some time this morning and now I get the following message appears and cannot print: "Spooler SubSystem App has encountered a problem and needs to close. We are sorry for the inconvenience. "I'm lost as how to solve this problem. Can you help me?
See how it works:
We are going to stop the Print Spooler Service and delete any backup up/stuck/in waiting it for print jobs and restart the Print Spooler Service.
To clear the print queue, stop the print spooler service and delete all the pending print files.
You cannot delete all print jobs in the queue so that the Print Spooler Service is running.
To stop the Print Spooler Service, click Start, run and enter in the box:
services.msc
Click OK to open the Services Applet.
Locate the Print Spooler Service, right click and choose 'Properties' and then click on the "Stop" button to stop the Print Spooler Service is running.
The option "Startup Type" of Service properties print spooler is usually set to "Automatic" (which is now a good time to check it out).
If the "Startup type" is not set to "Automatic", set the "Startup type" to "Automatic" If that is your desire (which now is the time to check it out).Do not try to start or restart the Print Spooler Service again...
Then, delete all updates pending upward and forward to printing from XP. If they do not print before, you will need to send the to the printer again.
Using Windows Explorer, navigate to the following folder (assuming that Windows is installed on your C drive):
C:\WINDOWS\system32\spool\PRINTERS
Delete all the print jobs in queue (select and delete all the files) in the folder if the folder is without waiting for print jobs. The folder must be empty when you are finished.
Reboot your system and check the Print Spooler Service again to make sure the Print Spooler Service restarts automatically restart (given that the startup type is set to automatic).
After the reboot, check again the spooler service for printing and the 'Status' column for the print spooler must be read "started."Submit new failure of print jobs.
-
Keep to spooler subsystem app error message.
I get an error message which announces that windows are closed spool subsystem app for reasons of security sikke, all printers are removed from my computer and it is not possible to install new, Microsoft can fix or should I switch to mac computer where this problem does not occurHi lille lt.
1. What is the full error message that you receive?
2. don't you make changes on your computer before this problem?
3. when exactly you receive this error message?
You can follow this link & check if the problem persists.
Hope the helps of information.
Please post back and we do know. -
Error message: SubsystemApp spooler has stopped working and was closed
Problem is with printer Epson EPL5900L laser which is not compatible with Vista. Found advice on forum Epson use XP driver and it should work, but try the message received the error "Spooler SubsystemApp has stopped working and was closed".
Drivers XP crashed the spooler service is provides printing functionality. Use a Vista / 7 compatible printer. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
That spooler SubSubsystem App has stopped working and was closed does mean?
Spooler SubSystem App stopped working and was closed means. I can't get my printer to print at all. Not even a test page.
Hello
Check with the printer manufacturer for updated drivers and support for known issues.
Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e===================================
If the above didn't help:
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx------------------------------------------------------
Logon as administratorStart - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------Also check the spooler print and its dependencies and addictions Service.
The value of all Services back to their default values.
Start - type into the search box-> Services find top - make a right click on - RUN
AS AN ADMINISTRATORBlackViper - for Vista SP1 - Services - all return to their default values.
http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020BlackViper - for Vista SP2 - Services - all return to their default values.
http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991How difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228CheckDisk (chkdsk) runs at startup.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
I have a Dell V305 printer. For unknown reasons, all of a sudden, I could not print. I couldn't choose a printer because mine was not listed. I spent two days trying everything I could find to get the printer spooler is working again. I rebooted a million times in administrative tools.
Hello
Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e===================================
If the above didn't help:
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx------------------------------------------------------
Logon as administratorStart - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------Also check the spooler print and its dependencies and addictions Service.
Print Spooler service
http://www.blackviper.com/WinVista/services/Print_Spooler.htmHow difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228CheckDisk (chkdsk) runs at startup.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlI hope this helps.
-
I have problems printing my Photosmart C5280 All-in-one on my desktop of Windows Vista 32-bit. I felt for a few years and have only recently met this issue. A few months ago, I set up a home network so I could print from my Toshiba laptop. The printer is connected to the computer via a USB cable and the laptop is connected via a Bigpond Modem/Router which is connected to the desktop via an ethernet cable. More recently, I have also configured for my son to be able to print from his HP laptop. Initially, we were able to print from any computer. The two paltops are running Windows 7 64 bit. However, in recent weeks, we noticed that we were no longer able to print from a laptop, and a few days ago, I was unable to print from the office. When I try to print from the office, the print job seems to go to the print queue, but is then removed from the queue. I then get an error message
"GPCore COM object has stopped working and was closed".
This applies to all applications even the test print. I just went through the steps on the HP site, including downloading and execution of printing HP troubleshooting and doctor Scan and uninstall then reinstall the printer. I'm a bit of a novice at the side Computer Hardware and wonder if there is anyone out there who has had a similar problem and found a solution. Any thoughts would be appreciated.
Hello MikeF48,
Sometimes to do a simple uninstallation / reinstallation is not do the trick, and we try to remove all the software from the computer completely. Most of the drivers available at HP have a scrubber utility that removes all traces of the software on the computer and allows you to reinstall the software fresh. We should start there and see if that gets us running.
I recommend you to do all this on the Vista machine. Once we have a working computer we can then pass from there to other laptops.
Here are the instructions to use the tool of the scrubber. There are two sets of instructions, one for if you have installed the drivers from the HP website or if you have installed the drivers from the CD that came with your printer. Follow the instructions for your installation accordingly.
Of the Original installation CD:
1. Insert the CD in the drive and then cancel Setup
2. open my computer and click right then on the CD from the drive and select open
3 open the Util folder
4 open the CCC folder
5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
6. once the uninstall is complete, restart the computer
7 run the Accessories\ System Tools Disk Cleanup
8. download and install the latest version of Adobe flash player
http://get.Adobe.com/flashplayer/
9 download drivers and full software features
Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
10. run the download to reinstall the printer
If the software has been downloaded and extracted to your system:
1. type % temp % in the field of race
2. Locate and open the folder starting with 7z (example: 7zS2356)
3 open the Util folder
4 open the CCC folder
5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
6. once the uninstall is complete, restart the computer
7 run the Accessories\ System Tools Disk Cleanup
8. download and install the latest version of Adobe flash player
http://get.Adobe.com/flashplayer/
9 download drivers and full software features
Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
10. run the download to reinstall the printerAfter having uninstalled the software and did a reinstall of fees. Let me know if the problem is still the Outlander.
-
continue to spread the message ' desktop window manager has stopped working and was closed ".
continue to spread the message ' desktop window manager has stopped working and was closed ".
The office then blinks and I can't use the Aero feature.
Any correction or known issues?
Thank you
in2stocksHello
It is usually a video driver issue. Would like to know what controller you have and see if the manufacturer has a new driver for Vista.
Please let us know if that was the issue.Mark <> Microsoft Partner
-
Trend Micro Internet Security has stopped working and was closed
Original title: manages all components of Trend Micro, __Internet security. has stopped working and has been __closed. __
Have you tried to disable my windows firewall and am always get error message (manages all components of Tred Micro Internet security has stopped working and was closed)
Hello
You should check with the support of TrendMicro.
Frankly it seems to ask a lot of questions, so I remove it and replace it with other more
compatible methods. To uninstall it, and then use the removal tool from
TrendMicro.TrendMicro - removal tools
http://eSupport.trendmicro.com/pages/how-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspxHow can I uninstall my Trend Micro program removal tools fail?
http://eSupport.trendmicro.com/pages/how-do-I-uninstall-my-trend-micro-home-and-Home-Office-program-if-the.aspx------------------------------
Here's what I use and recommend: (these are all free and very effective versions.)
Avast and Prevx proved extremely reliable and compatible with all I have
launched on them. Microsoft Security Essentials and Prevx have also proven to be very
reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
Operation of the network.Prevx - Home - free
Windows Firewall
Windows Defender (is not necessary if you use MSE)
Protected IE - mode
IE 8 - SmartScreen filter WE (IE 7 phishing filter)
I also IE always start with asset if filter InPrivate IE 8.
(It may temporarily turn off with the little icon to the left of the + bottom
right of IE)Two versions of Avast are available 5.x and 4.8 x
Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
disabled - click OK
http://www.avast.com/free-antivirus-downloadAvast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
Finish those you don't use).
http://www.avast.com/free-antivirus-download#TAB4Or use Microsoft Security Essentials - free
http://www.Microsoft.com/Security_Essentials/Prevx works well alongside MSE or Avast
Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->PCmag - Prevx - Editor's choice
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspAlso get Malwarebytes - free - use as scanner only. If you ever think malware and that
would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
(not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
never find anything of note that I started to use this configuration.I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Installer of Modules of Windows has stopped working and was closed
Hello
I have a laptop Toshiba Satellite (running Vista Home Premium) that I bought about two months ago. When he tries to run updates, he routinely gets through a few and then up pops the message "Windows Modules Installer has stopped working and was closed." I have already reinstalled Windows Updates and Microsoft Updates, nothing helps. Recently, she was immobilized on the KB958623 update, so I tried to install that separately, but the same message popped up and it did not work.
Help?
Thank you!Greetings mollypopsicle,
I see that we have always had problems with this update. This leaves me with the question about the possibility of fi computer update auto is damaged during download.
I would like to have you create a folder on your desktop. Right-click on an empty spot on the desktop / new / file - name of the folder KB958623.
If you have a download manager, please use it to download the KB958623 update from this Web site
http://catalog.update.Microsoft.com/v7/site/search.aspx?q=958623%20
Make sure you use the version of Windows Vista that applies to your system.
Once the download is complete and before running the update
- Restart your system in safe mode with networking, as described in the above post from Brian.
- Once the system is booted in safe mode with network, run the update from the file that is downloaded on.
- If this does not properly complete, were there a pop-up Windows indicating that an error? If so, what were these errors?
- Maybe it's that the error you receive is that this update does not apply to your system. If so, this update can be hidden in your list of updates.
Here is a link on how to hide the update
Select only the I'm getting offered an update from Windows that I don't want.
However, before you do, check which version of Windows Vista is ran - home edition, Premium, Ultimate, it is 32-bit or 64-bit edition. Also, if there is an error of execution of this manual update mode safe mode with networking, include this information in the forum.
Thank you and continue to keep us informed of the State of this update.
Best regards
Debbie Microsoft Support Engineer answers visit our Forum of Microsoft answers Feedback and let us know what you think.
-
Whenever I run windows update, and try to install an update for Vista, I get the error message"
"Windows Modules Installer has stopped working and was closed"
. This has happened for quite awhile and I tried many suggestions on the web. If you do an internet search, you will see this seems to be a fairly common problem, but I can't find any official solution of Microsoft. I am afraid that I do not receive the latest updates and security patches so would like to help with this question.
Thank you
Luke
Hi guys
I had installed up-to-date antivirus software and my problem seems to start after an update from Microsoft. Do a search on the web and you will see similar stories. I spent so much time trying to solve this I think it's better just to do a re-install. Certainly not the resolution I had hoped, but appreciate this type of questions are almost impossible to solve the problems through intermittent mail such messages.
Thank you
Luke
-
manages scheduled tasks has stopped working and was closed
Lately I get this error message often when I start using my Vista PC (Vista Business SP2) in the morning: "manages scheduled tasks has stopped working and was closed".
And this morning the automatic update of Windows Defender definitions also could not install (so I would be dnld and installed). Set to automatic update referred to 'unknown error' (8 and 57, I think).
FYI, sfc/scannow reported no integrity violoations with system files. I also reconfigured my PC there is to make sure that it is clean, fresh and perfectly up-to-date before reinstalling all my apps, and it's been updated for about 2 months then.
How this application problem "manages scheduled tasks" can be fixed? If you don't know, where can I get an answer? Neither Google nor Bing seem to show any reference to the exact phrase "" manages scheduled tasks has stopped working stopped working '. "
Craig in New Jersey
Update 7/22: I'm starting to suspect a problem of interactions between turn off Vista and [printer] HP Digital Imaging Monitor. I tried to disable it via msconfig, a couple of days and have not seen the mistakes regularly ever since, but the jury is still pending for another week or two. I'll report after awhile.
It is too early to point a finger because we know that all of them have well worked normally in the past and they seem equally at risk of corruption. For example, I have no these errors when you use the same software HP on my Win7 PC and I don't have these errors for a few months after that the reconstruction of my Vista laptop, so I'm suspecting some piece of software has become corrupted (something in Vista), or something the tracking software program, some windows or component or registry setting software execution to one who relies on the HP printer.
Craig in New Jersey
Update 7/27 edit: Since disabling component HP Digital Imaging Monitor (hpqtra08.exe) drivers HP printer/scanner more than a week ago, I have not seen error messages 'has stopped working and was closed"breed, and Windows Update seems to operate normally.
-
Message "Microsoft (C) Register Server has stopped working and was closed" appears
When I start up I get the message "Microsoft (C) Register Server has stopped working and was closed".
Here, an article which offers a solution to this problem that seems easy to implmenent and is worth a visit:
. I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Maybe you are looking for
-
We are unable to type in the address bar and change the homepage
Hello, after I accidentally installed snapdo, we can not type in the address bar or the search bar. I managed to remove snapdo now of the laptop. Export my bookmarks, reset firefox, nothing has changed - still does not. Uninstalled firefox, reinstall
-
HP Envy 15-j092nr: Clean install - drivers must, please.
PCI device: PCI\VEN_10EC & DEV_5227 & SUBSYS_1963103C & REV_01PCI\VEN_10EC & DEV_5227 & SUBSYS_1963103CPCI\VEN_10EC & DEV_5227 & CC_FF0000PCI\VEN_10EC & DEV_5227 & CC_FF00 PCI Simple Communications controller: PCI\VEN_8086 & DEV_8C3A & SUBSYS_1963103
-
Hello to everyone. I have a printer Canon MG 5250 Wifi, but I can't print. Yet my computer doesn't recognizes my printer and when I go in solving problems, en of there is none. The little phrase "your printer is online displays", printing the documen
-
information under my shortcut on my desktop icons are gone... Help
the icons on my desktop are still there, but the name of the icon (shortcut) disappeared. There is just a blank white box under each icon... help
-
_NEC DVD_RW ND-3540 has and HL-DT-ST DVD - ROM GDR8163B
Recently, I noticed that the computer does not recognize any CD or DVD, then I looked at my computer, and (a DVD r/rw) and DVD - ROM drives have disappeared. In Device Manager, two disks have by them exclamation points. I tried to update the drivers,