Subtitles in Windows Media Center

Similar Questions

• How to activate subtitles in windows media center?

  Please tell me the way to activate subtitles in windows media center and windows MediaPlayer! Thank you!

  Hello

  Follow the links below.

  Show captions or subtitles in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows7/show-captions-or-subtitles-in-Windows-Media-Player

  For Windows Vista: http://windows.microsoft.com/en-US/windows-vista/Show-closed-captions-or-subtitles-in-Windows-Media-Center

  Show captions or subtitles in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows7/show-closed-captions-or-subtitles-in-Windows-Media-Center

  For Windows Vista: http://windows.microsoft.com/en-US/windows-vista/Show-captions-or-subtitles-in-Windows-Media-Player

  Incase if it is Windows XP: then let us know the version of Windows Media Player and the edition of Windows XP is installed.

• Why not subtitles in Windows Media Center? __

  I see no subtitles in Windows media center.  I have the .srt and .avi, the same files in the same folder.  I use win 7 64-bit ultimate.

  I searched and read about hacks registry, codecs and other things that I do not understand.  I read on the codec bibles that have me laying the boards of 7 or 8 of the software.  I have downloaded the CCCP codec pack and uninstalled then after he has not helped (there was a long list of settings that I didn't get in this one).

  Microsoft has impossible subtitles for non geeks?

  Any help would be appreciated.

  I had read your answer before.  I don't seem to know how to take ownership of these files.  Access is denied, tried to change the permissions and access has been denied.  I don't know what to rename the files, even if I was allowed to rename them.  Could you be a little more detailed and accurate?

  I repeat-Microsoft did make the impossible subtitles for the non-geeks ?

  Perform the following steps with each of the six files listed before:

  1. Right-click on the file
  2. Select "Properties".
  3. Select the security"" tab.
  4. Click on "Edit"... »
  5. Click on "Add..." »
  6. Enter your user name, and then click OK
  7. Select your username from the list
  8. Check the 'Total control' / 'allow '.
  9. Click on 'OK '.

  Now you should be able to rename the file.

  If the procedure seems too complicated for you, you can download and install thislittle tool . It will add that 'Ownership' in the context menu of files, so all you have to do is click right button of mouse on the file and select 'ownership '.

  Good luck.

  Microsoft Student Partner

• How to read subtitles in Windows Media Center?

  Hello! I bought a CD of movie and downloaded subtitles ".srt" for this movie. These subtitles ".srt" run in VLC media player by keeping just the video and the '.srt' in the same folder and two identical file names. But when I play the movie in Windows Media Center, the subtitles do not appear. How do I make them work?

  Hey Mary!
  I'm sorry but I don't have the subtitles that are already there in the DVD. As I said, there are no subtitles in the DVD. There was just a .avi file. In VLC Media Player (that I currently use as my primary movie player), simply paste. SRT file in the same folder and check the file of the same name. VLC media player automatically detects and manages the subtitles with video. This technique works for all video formats that work with VLC Media player, includin, .mp4, .m4v, .mkv, .wmv, .avi, etc..

  Is that we can run these subtitles .srt (sometimes .sub) with Windows Media Center?

  You can, but you must tell the codec to load the subtitles.  I am assuming that you are using ffdshow, in video settings, there is a setting to enable and disable the subtitles, it is a function of the video decoder not the player, VLC comes just at a time.

• How can I get subtitles in Windows Media Center. (Netflix)

  Is there a way to put subtitles on Netflix (Windows Media Center) for windows 7?

  Please give an answer. It will help a lot :).

  It will be published with the response once the answer is here and I'm back on this Web site.

  Thanks for the support! Really helps!

  N ° for this, you'll need to use the site Web of Netflix or Netflix app.

• How do you play dubbed audio or subtitles in Windows Media Center Extender (Xbox 360)?

  I know how to turn subtitles on my Windows Media Center PC, but there is no option to select audio dubbed or subtitled when you use Windows Media Center Extender. All my video files contain subtitles and audio dubbed foreign films.  My wife loves Spanish subtitles, because she has trouble understanding some English films.  I searched some forums and there are questions there but they have no definitive answers.  How a company billions of dollars developing a Media Center and leave out or miss crucial features like these? Please do not react with the thread on how to activate subtitles in TV Mode. Which does not apply to this question. The key word is EXTENDERS.

  Hi AnthonyWilson5

  Subtitles should be coded in the movie view. These subtitles are automatically playing with video files. If the subtitles are a separate .srt file, then you will not be able to visualize everything by watching a video on the 360. There is no real turn option ON or OFF for subtitle in the Xbox 360.

  But for more information you can even try to contact the expert Microsoft Xbox 360 team. Please visit the links below to find a community that will support what ask you in the right direction for Xbox 360.

  http://forums.Xbox.com/

  I hope this helps.

• Windows Media Center in Vista doesn't have the option for Closed Caption

  Hello

  I went to a page "Help & how-to" describing the process of "see closed captions or subtitles in Windows Media Center." He showed the following steps:

  "To turn closed captioning on or off.

  1. In the start screen, navigate to tasks, click settings, click TV or DVD, then closed captioning. In some regions, you may need to select subtitles instead of captioning. »

  My problem is that I don't have the option for subtitles in TV as described above. But I have to DVD. So where and how can I solve this problem?

  Thank you.

  Go to settings, television, then you will see the captioning, then you can click on the + to switch running or go to advanced for more options.

• How can I burn a DVD in Windows Media Center with the closed captioning information included?

  I recorded a program in Windows media center.  When I read the program, it displays the closed captioning information.  If I burn a DVD program closed captioning information do not display during playback.  How can I burn the DVD to include captioning?

  Hello
   
   
  1. How do you try to burn the DVD? You have saved the DVD on the desktop (hard drive) or you burnt before you save it to a DVD?
  2. after are burning the DVDs in which application you trying to play?
  
  I suspect that the captions are already burned in DVD, at this point in time we can cross check if the option is set to display captions.
  To enable or disable subtitles for DVD
  a. on the Windows Media Center start screen, navigate to tasks, click settings, click DVD and then click subtitle.
  b. click the plus (+) and minus (-) buttons to select power off or when cut, and then click Save.
   
  For more information, refer to the article below.
  Show captions or subtitles in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows-Vista/Show-closed-captions-or-subtitles-in-Windows-Media-Center
  See also the belowl link:
  http://Windows.Microsoft.com/en-us/Windows7/turn-on-full-screen-mode-and-closed-captions-in-videos-on-the-Windows-website
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can I connect a Dazzle DVC90 Windows Media Center so I can watch subtitled freeview.

  Can I connect a Dazzle DVC90 Windows Media Center so I can watch subtitled freeview.

  I know that most TV Turner will offer shows with subtitles, but will not save the subtitles.

  Hi CrazyComMan,

  See the article next to Roxio Web site:

  http://KB.Roxio.com/Search.aspx?URL=/content/KB/Creator/000137CR¶ms=

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How do you get the subtitles to work in Windows Media Center Netflix?

  I have Windows 7 64 Home Premium with Windows Media Center for a Home Theater Personal Computer.  I can watch Netflix streaming movies with subtitles using IE8 or IE9 and Silverlight, but may not know how to activate in Windows Media Center.  The always cheerful and almost all means useful Netflix Customer Service says only Microsoft can manage Netflix plugin for Windows Media Center issues.

  No support to do this from Microsoft, does anyone know how to do this?

  Hi keepitsimple.

  This feature is not currently supported in Netflix for Windows Media Center. If you want to apply, you can contact Netflix to let them know:
  http://www.Netflix.com/contactus?lnkctr=cuPh&show=true
  I hope this helps.

• Satellite P - Windows Media Center problem

  Without any visible problems or bug virus threats, Windows Media Center starts to crack on video output.

  Just randomly losing pixels on a screen and all other similar programs like wmp, vlc media player, mv2, and Intervideo Win DVD works properly?

  Hello!

  You have installed any Service Packs or patches for your operating system?
  Check on the Microsoft update Web site.

  I think that your assignment isn't really clear. Can you please explain this exactly?

  Good bye

• Windows Media Center "to listen or look at a conflict"... does not recognize the TV tuner

  I have completely exhausted the forum Windows Media Center for response to the resolution of this problem. I replaced my unit ATI TV Wonder Digital Cable Ready, as well as my graphics card tuner, and WMC still says 'No TV Tuner Found"and the message" listen or look at a conflict - no tuner available to meet the current demand "when I try to watch live TV. I have also a "no tuner hardware detected... Please ensure equipment is installed correctly...» "if I try to set up the TV Tuner again.

  I don't think that my answer lies in Windows Media Center or hardware from ATI. I'm now trying to figure out if it involves this feature installed at the factory of HP listed on the bottom of my computer: "GENUINE WINDOWS VISTA HOME Premium TUNER DIGITAL". I understand that it is the software and hardware.

  I would be grateful if anyone has answers. If anyone knows what this function is that was installed at the factory, and how I can uninstall and reinstall the software and replace the hardware, I understand that too.

  Thank you

  After unsuccessfully trying everything I could find that had the potential to solve my problem, I finally solved the problem myself.

  It's actually a corrupted Windows file that allows my TV tuner, which caused all my problems. I reinstalled my Vista operating system to its original state, and now the ATI TV tuner works fine. Easier said than done.
  
  Mr. Fix It

• No big screen in Windows Media Center on Qosmio G10-133?

  Hello
  I just set up my Qosmio G10-133 to watch the TV via a set-top box Freeveiw. However in Windows Media Center, I can't see it on the big screen. If I veiw the same programe in the Toshiba drive I can veiw on the big screen OK.
  Any help with this would be much appreciated.
  Thanks in advance.

  Hello
  Can you please check in the BIOS settings if there is option called display stretching or something like that?

• Windows Media Center - why it cannot detect TV?

  I used Qosmioplayer and it detects the TV from my Sky Digibox very well signal. However, I would like to record TV with my laptop and when I try to set up the TV using Windows Media Center, it cannot detect anything. I tried every possible permutation and the manual does not give pointers...

  Why the Qosmiplayer works for the entrance to Sky TV, but not the media library?

  Please help it's driving me crazy!

  I assume you are using a lead of areal coaxial standard to connect to your sky box? If so, you need to know which way the sky is coming in the. To do this, use the Qomsio drive to search for channels and when it detects the signal from Sky, it will tell you which way it is passed on. Something like channel 36. OK, now you have this information, start the machine and go into Media Center. You must manually add this channel. As Media center works with the EPG, all channels such as the skyinput must be added.

  So, in the main menu, go to

  Settings > TV > Guide > add missing channels > add channel

  Now enter the channel name you want displayed when viewing. IE SKY.

  Now you enter the channel number 36 IE that you got the Qosmio engine. This will now be held on the next available channel. IE 6/7/8 etc. Everything do you now is go to the channel and it appears at the entrance to heaven.

  Hope this helps

• Qosmio G40 - 10F: how to set up double Tv Tuner in Windows Media Center

  Hello

  I recently bought a 10th G40 and I was wondering how to set up dual Tv Tuner in Windows media Center to watch and record the Tv at the same time.
  I tried to download the new driver from the Toshiba download page, but it seems to make no difference that Media Center does not give me the ability to configure 2 tuners.

  Any help would be grateful

  Michael Bowen

  Hello

  Found this useful Microsoft page:
  http://www.Microsoft.com/Windows/products/windowsvista/footnotes.mspx

  Take a look at the chapter * M *-> on MCE

  You can find this info:
  + Reading and TV recording features require a USB TV tuner or external. Supports up to two TV tuners +.

  So in my opinion, you cannot record TV and watch another channel at the same time using only the internal TV tuner.