Sudden creation of the 20 GB 2.15 mV before upgrade 7 7.1

Similar Questions

• Distiller will suddenly end/crash the * SECOND * time I open a file for conversion to PDF.

  The subject says it all: Distiller will suddenly end/crash the * SECOND * time I open a file for conversion to PDF.

  But I think I have an idea why this is happening. In general, I use Distiller to convert EPS or PS files as PDF files. In addition, almost without fault, I incorporate the required (only of Type 1) fonts directly in files EPS/PS (using the required format to PFA) so no local fonts on my computer are needed to be looked at to distill in to be embedded in the file PDF. they are already in the EPS/PS files.

  But yesterday, I tried to convert EPS/PS files to PDF using Distiller in which I had NOT embedded fonts Type 1 (PFA format, of course) in the source of EPS/PS files. All first this conversion would work (in which I select "open" and choose an EPS/PS file for conversion), but after this initial conversion, the * SECOND * time I clicked "Open" the file, Distiller would immediately close/crash.

  Then, I searched the web for answers and discovered that some people have trouble distilling to initialize if all their computer system fonts were read-only. So I went back to my EPS/PS files and embedded fonts Type 1 (PFA format) required in them and then - as if by magic - distill worked without a hitch: I could open and convert any number of them in succession, with distilling never close / crashing.

  Then, I found the reason why distilling had been crashing at the second attempted to open a file (once again, simply by pressing the "open" button to find a file to convert, * no * after selecting a file) must have something to do with distilling scanning fonts installed on my computer, when there was no PFA font incorporated to make reference to , and a read only font on my system was the cause of the problem. However, I have looked in both places of logic where my fonts must be located (c:\psfonts and c:\windows\fonts), but found * no. attributes * files fonts defined in 'read only' so, I'm stumped.

  I use Distiller Pro 10.1.1316 (acrodist.exe) on a machine to earn 8.1. I found similar positions, which dates back to 2004, about Distiller crashing immediately after opening when certain fonts are read-only; I haven't found a post about anyone successfully using Distiller to convert EPS or PS to PDF and then have the program crash when the "Open" button is pressed subsequently. The clues, anyone?

  Background: Distiller Server is a product discontinued long - ago - use of Distiller server is now simply prohibited, and LiveCycle PDF Generator is available for servers.

  Since you are not using Distiller Server and this forum is essentially abandoned, I recommend that you try the Acrobat - forum creation (etc.) instead.

• all of a sudden all of the emails I received before 14:00 today are all the source code for the new ones nsince PAREN then are all readable ideas?

  all of a sudden all of the emails I received before 14:00 today are all code source hyperlink the nine since then are all readable ideas?

  Right-click on the folder, select Properties, and then choose the button repair.

  Long term solution is to not allow your anti virus scan profile of Thunderbird folders.

• Icon strange sudden appearance between the address bar and search engine

  A weird icon suddenly appeared between the address bar and search engine... It looks like a 'ball' for a character of cardboard. Cannot understand the source or meaning. Thank you in advance.

  
  

• Re: Equium A200-15I - crack suddenly appeared on the screen

  Hello

  I bought a Toshiba Equium A200-15I laptop about 15 months ago, and I'm not sure that this is under any kind of warranty or not.

  A few weeks ago I tried to turn on the laptop but a crack suddenly appeared on the screen and the screen has been damaged. It seems as if the crack is internal, because I can't feel anything on the surface of the screen.

  I wonder how it is possible to know if the laptop is under warranty or not, and if not, if it is possible to fix the problem.

  Thank you very much
  Ken

  Hello

  This guy s shame

  I fear that this issue is not could be covered by warranty m.
  These cracks may not appear without reason
  I think that something touched the screen and led to this crack

  In any case, you could simply ask a technician ASP in your country for details and the manipulation of the Fryer, but I doubt that the warranty would cover replacement.

  Welcome them

• Full backup impossible. An error occurred during the creation of the backup folder.

  Having had a HARD drive failure and have replaced I have now bought a WD 3 to WD My Book for Mac. Plug and put in place to save. However will not achieve, and gives this error message

  Full backup impossible. An error occurred during the creation of the backup folder.

  Does anyone else have this problem?

  Paul

  How the drive is formatted?

• my laptop's sound creation all the time whenever I'm on it... When I touch, it makes its strongest...

  my laptop's sound creation all the time whenever I'm on it... When I touch, it makes its strongest...

  Friday, October 12, 2012 14:20:21 + 0000, gops22 wrote:

  my laptop's sound creation all the time whenever I'm on it... When I touch, it makes its strongest...

  What kind of noise? If it's the hard drive makes noise, there
  probably about to die and should be replaced as soon as POSSIBLE.

  Ken Blake, Microsoft MVP

• T510i screen suddenly darkens & increases the gamma

  From time to time, the screen suddenly fades, and the gamma increases.

  This has nothing to do with the brightness settings, since they remain the same (and indeed, increase the brightness still works, but the brightness (maximum) overal remains lowered).

  I think that this only happens when you run out of battery, so it might be a power issue.

  I have this problem since the beginning (about three months).

  But this week, the battery also does not. Maybe there's a fault in the power supply?

  Someone has encountered this problem before?

  Thanks for any help!

  Mark

  Try this?
  http://forums.Lenovo.com/T5/T400-T500-and-newer-T-series/T410-screen-brightness-dims-washes-out-on-b...

• "the creation of the video preview failed" to DV (firewire) and USB webcam camera

  Device Manager reports the two devices "working properly", but all attempts to use their failure any software I use.  The error varies with the software package.  Trying to get a preview of the video via "My Computer" results in the error "the creation of the video preview failed".

  Devices used for work several months ago but I don't remember exactly when they stopped working.  A Service Pack or some other Windows Update update may have caused the problem (not sure).

  Any help would be greatly appreciated.

  [My system: Windows XP (Media Center Edition), Service Pack 3, Dell Dimension, Intel Core 2, 1 GB of RAM]

  Nevermind, it works now.  For those who have the same problem, here's what I did to remedy.

  1. take DirectShowSpy.dll of Roman Ryltsov http://alax.info/blog/777 and at the command prompt, type "regsvr32 DirectShowSpy.dll" to save it.  (In fact, I used a previous incarnation, also by Roman Ryltsov, called FilterGraphSpy.dll that I had downloaded previously).

  2 - try to use your webcam or your DV camera again.  If it works, you can uninstall DirectShowSpy.dll by typing "regsvr32 /u DirectShowSpy.dll".  My camera and webcam continued to work properly after I uninstalled it FilterGraphSpy.dll.

  That's all.  Although I did some DirectShow programming, I don't know the reasons detailed why this would clearly be this specific problem.  Roman could.  Good luck.

• Difficulties to display recorded XP of Windows Movie Maker movie file. You try to view saved WMV format results in arrested image creation, but the music continues.

  Problem with Windows XP Movie Maker. You try to view saved WMV format results in arrested image creation, but the music continues. Tried to re-record and solve the problem, no luck. Can properly view in Movie Maker as a project, but not the final version in WMV format.

  More details: I saved my Windows XP Movie Maker project in WMV format. I taped 3 ways: at my computer on a flash drive and a CD - r. Everything seemed fine until I try to see the movie. The video freezes on a different image in each of the places I recorded it, but the music continues & it's in the same place every time depending on what I am posting with (the computer it freezes on a certain task, the flash on another, the cd on another), tried re-register but it always does the same thing... gel on a photo but the music continues. Help! I can't find a solution anywhere. PS Please answer me "simply", as I'm not too computer savvy.

  Problem with Windows XP Movie Maker. You try to view saved WMV format results in arrested image creation, but the music continues. Tried to re-record and solve the problem, no luck. Can properly view in Movie Maker as a project, but not the final version in WMV format.

  More details: I saved my Windows XP Movie Maker project in WMV format. I taped 3 ways: at my computer on a flash drive and a CD - r. Everything seemed fine until I try to see the movie. The video freezes on a different image in each of the places I recorded it, but the music continues & it's in the same place every time depending on what I am posting with (the computer it freezes on a certain task, the flash on another, the cd on another), tried re-register but it always does the same thing... gel on a photo but the music continues. Help! I can't find a solution anywhere. PS Please answer me "simply", as I'm not too computer savvy.

  ===================================
  Some experiments to try.

  (1) create a small project with just a few pictures and see if it will play.

  (2) use .bmp photos to create the project instead of .jpg photos.

  (3) remove all transitions and resave the project as .wmv and see it it helps.

  (4) If your music .mp3 file... try to use .wma or .wav. John Inzer - MS - MVP - digital media experience

• My taskbar is suddenly vertically on the right side of my screen instead of at the bottom. (default) Ive tried to bring it back to its original spot by clicking and now an empty space, but cannot get a reaction. How can I get that back to the default?

  My taskbar is suddenly vertically on the right side of my screen instead of at the bottom. (default) Ive tried to bring it back to its original spot by clicking and now an empty space, but cannot get a reaction. How can I get that back to the default?

  Right-click on the taskbar and make sure the taskbar are not locked. Then move it using the left mouse button. Microsoft® Security MVP, 2004-2009

• My Start menu is suddenly appeared on the side of the RT. of my scren. How can I put it on the bottom?

  My splash screen suddenly jumped on the right side of the screen from top to bottom. I would like to come back on the bottom left of the screen. How can I do this?

  Hello

  This should help you.

  «Unlock and move the taskbar»

  http://Windows.Microsoft.com/en-us/Windows-Vista/unlock-and-move-the-taskbar

  To unlock the taskbar

  • Right click on a space empty in the taskbar. If a checkmark beside him doesn't lock the taskbar, the taskbar is locked. You can unlock it by clicking on lock the taskbar, which removes the check mark.

  Note

  • To lock the taskbar into place, right-click an empty space in the task bar, then click on lock the taskbar, so that the box is displayed.

  To move the taskbar

  • Click on an empty space on the taskbar, and then hold down the mouse button, dragging the taskbar to one of the four sides of the office. Once the taskbar where you want, release the mouse button.

  See you soon.

• Suddenly cannot open the Pdf online. Adobe crashes with this error message: Microsoft Visual C++ Runtime Library program C:\Program Files SQL Server 2008\Adobe\Reader10.0\Reader\AeroRd32.exe

  Suddenly cannot open the Pdf online. Adobe crashes with this error message: Microsoft Visual C++ Runtime Library program C:\Program Files SQL Server 2008\Adobe\Reader10.0\Reader\AcroRd32.exe

  Uninstall your Adobe Reader software and then install the latest version fromhttp://www.adobe.com/ and see what it does for you.

  writing in the new message: * e-mail address is removed from the privacy... *

  Suddenly cannot open the Pdf online. Adobe crashes with this error message: Microsoft Visual C++ Runtime Library program C:\Program Files SQL Server 2008\Adobe\Reader10.0\Reader\AcroRd32.exe

• sudden loss of the battery?

  I'm a X201T, two year old battery 8 cells. I had certainly noticed a deterioration of the battery life, up to about 2.5 hours of active work. But suddenly the battery won't charge at all and I am informed the State of the battery is low, time to replace. Interestingly, this occurred after that the machine has passed a couple of weeks off, not used at all.

  Should it? I had assumed a gradual decline to zero, not a sudden death of the absolute. Would it be a problem in the Power Manager software, or something like?

  Thanks for any help you can give me. Greg.

  It is not unusual for one or more cells in a Li-ion battery to fail after a couple of years. The result is that the battery is completely dead or suddenly drops a large amount of reported load, for example going from 80% to 40% in a few seconds. This can happen if you leave the battery at 0% for an extended period of time.

  One thing to try: go in Power Manager battery information tab and click on "Battery maintenance" to try to "Recondition" the battery. If this does not work the first time you can try once or twice more. No guarantee that it will work.

• Reference Dell backup and restore - "an error occurred during the creation of the backup of the system"

  I have a Dell XPS-8700 running Windows 7.  I bought the Dell Backup and Recovery Premium Edition.

  I was able to create a backup bootable (hot spare), and I can create a backup of data on my external hard drive.  However, whenever I try to create a backup on my external hard drive system, after about three seconds in the process, he returned: "an error occurred during the creation of the backup of the system.

  How can I create a backup of the system?  Why I get this error?

  Thanks for all the info. My situation sounds very similar to yours.

  I removed using Add/REMOVE programs in the control panel DBR and he removed cleanly.

  V1.7.1.2 downloaded and executed new facility.

  When I ran, it was my premium license key so he had yet to register and was not removed by uninstall.

  As before, Rescue Disk ran and installed the new partition (DBR_BOOT) on WD Passport.

  However, backup system immediately stopped with disconnected, missing target location or full. Tried several times...

  In any case, sounds like you have solved your problem, so you like OP should this brand this post/thread as answered. I will continue to post on my other thread.