Sudden error-> ORA-20505: error DML

Similar Questions

• ORA-20505: error in DML: p_rowid AAARr/AAOAAAAh9AAB =, p_alt_rowid = PK, p_row

  HI, Hi, I'm running Application Express 4.0.1.00.02 and Oracle 11 g I can't do updates. As a result of updates in the following: ORA-20505: error in DML: p_rowid = AAARr/AAOAAAAh9AAB, p_alt_rowid is PK, p_rowid2 =, p_alt_rowid2 is. ORA-01733: virtual column not allowed here. Insert or delete error is: ORA-01733: virtual column not allowed here. The pk in my opinion have a rowid column and do not have a sequence number. ManyThanks.

  ROWID is a virtual column in view of Oracle. You must identify a column or set of columns in the table for Oracle to TRY and maintain order in the data...

  Thank you

  Tony Miller
  Webster, TX

  Never argue with a fool. They do you drag down to their level, then beat you with experience.

• ORA-20505: Error DML

  I have a form that is based on a view joining three tables and make changes/insertions/deletions via INSTEAD OF relaxation. Updates go well, but for inserts, I get the following error:
  
  ORA-20505: DML error: p_rowid = 94703, p_alt_rowid = NUM_SEQ_LIN, p_rowid2 =, p_alt_rowid2 is. ORA-01403: no data found
  
  Apparently, INSTEAD OF trigger does not fire (I have inserted into a special table of debug information never show). NUM_SEQ_LIN is initialized.
  
  Does anyone know how to decipher this error message and find what went wrong?
  
  Igor

  Hello Igor.

  If you insert the debug information in the INSTEAD OF trigger (and do not use an autonomous transaction) and the defective trigger, the iof insert debugging information will also be rollbacked.
  Maybe you could post the code of your trigger to insert here.
  Have you checked if the triggers on target tables can cause the problem - those will fire also.
  Your page running in DEBUG mode can help you catch the problem.

  Greetings,
  Roel

  http://roelhartman.blogspot.com/

• ORA-20505: DML error: p_rowid = 22, p_alt_rowid = WRKORDR_ID, p_rowid2 =, p_a

  Hello, I have created a form and a report. I am able to add a new record, but when it comes to updating a record, I get an ORA-20505: error in DML: p_rowid = 22, p_alt_rowid = WRKORDR_ID, p_rowid2 =, p_alt_rowid2 is. ORA-01403: no found error.
  I have created a workspace with Oracle, exported my paintings, objects,... and he asks. Would it not be possible for someone to check it out and let me know what is wrong with it. It is a very simple page that I will develop more in a production project.
  
  Here is the link http://apex.oracle.com/pls/otn/f?p=37538:101:105615541964265:
  
  Thank you
  iahmadi

  Understand how the page makes the distinction between a 'create' and an 'update' and an operation of 'delete '. Generally, this indicator is either passed in the value of 'request' or is implied by the presence of a page element with a non-null primary key value. Then make the get_pk process are those input values.

  Scott

• ORA-20505: error in DML - data in db Version has changed

  Hello
  Request Express 3.1.0.00.32
  I created a report and master detail in the sample Application on oracle.application.com. I get an error on my Master form when you click < Previous and Next >. I saw other problems of this kind in the forum, but it seems that everyone is a little different. Can someone help me with this error when you browse the next answer (s). Thanks in advance.
  
  ORA-20505: DML error: p_rowid = 6, p_alt_rowid CUSTOMER_ID =, p_rowid2 =, p_alt_rowid2 is. ORA-20503: current Version of the data in the database has changed since the user initiated the update process. current checksum = checksum of the "E9A08EDC02A82871E6865DB254B09ED2" = "39454529513F24BE60C167752BF71750."
  
  I created another page master detail and I don't have any errors when scrolling using the <>. This is a process that can be causing my error by using the page master original detail.
  

  DECLARE 
  CUSTOMER_ID VARCHAR(20);
  BEGIN
   SELECT CUSTOMER_ID INTO :P21_CUSTOMER_ID
   FROM DEMO_CUSTOMERS
   WHERE CUST_FIRST_NAME = :P21_CUST_FIRST_NAME;
  -- processing here
  EXCEPTION
    -- Catches all 'no data found' errors
     WHEN NO_DATA_FOUND THEN
       DBMS_OUTPUT.PUT_LINE
         ('No Data found for SEARCH on ' || CUSTOMER_ID);
  END;

  Published by: Charles was April 30, 2009 11:40

  Hi Charles,

  I had a look at your page 21.

  The problem was that the 'Values of Fetch 2' process was not conditioned and was running in the point of the process "on the load - before the Header." That meant he was running whenever the page is loaded. This process checks the value CUSTOMER_ID in P21_CUST_FIRST_NAME that, because the process of "search for the line...". "has not been performed at that time there (he turns"on the charge - after the Header"), will always return the same value CUSTOMER_ID from when the page was first loaded. The next/previous buttons, however, moved the front/rear P21_CUSTOMER_ID only one value (this became obvious when this field was changed from 'Hidden and protected' to 'Text'). Therefore, the data on the page was for "Albert" but was it to CUSTOMER_ID for any document was previous to the Albert one. Thus, moving next/previous always caused a mixture of real data.

  I changed the "Fetch values 2" process to depend on P21_CUSTOMER_ID is NULL. In this way, the CUSTOMER_ID value found ONLY by code when the page is loaded for the first time. Subsequently, it is controlled by the next/previous feature.

  Andy

• ORA-20505: DML error: p_rowid = 684, p_alt_rowid = RETAILER_ID, p_rowid2 =, p

  HELP PLZ

  It's really a small question...

  Run your page in DEBUG mode, and you'll probably notice where the error is thrown.

• sudden error "too many listeners on GPIB.

  Out of the blue, I'm suddenly in the face of this "too many listeners on the GPIB" error, and my PC has found is more all instruments in NOR-MAX. I have a GPIB-USB-HS connected to my PC and 8 instruments (some HP4142b, Keithley instruments, electricity, etc.), Garland with different GPIB cables... I was able to control them in LabVIEW and summer don't saw no problem with it for months.

  Then yesterday, LabVIEW (I have 2012) suddenly hung when I tried to access one instruments (which went in the State "is not responding"). He could see to the recovery, is no longer one of my instruments GPIB on the menu drop down. I rebooted LabVIEW, but still the same thing... could no longer see my GPIB instruments. I rebooted the PC and the same issue. Then, I could see no longer the GPIB instruments in NOR-MAX. I spent a few hours of debugging, try different configurations, connection to 1 or 2 instruments at once... now with this new Setup, I am able to let him see 7 of my instruments, but not all 8. I have a system to Keithley 7001, it doesn't seem to like more... When I connect it to the rest of the GPIB instruments, I get the "too many listeners' error and can not see all the instruments in Max weird because I have two of these 7001 s in my installation, and it is seems ok connection to one but not the other.

  Overall it is really strange and I can't figure out what that might be the problem... would appreciate advice/suggestions.

  I have checked/tried things

  -all GPIB instruments have unique addresses... There is no conflict of interest. as I said, things worked fine before... Suddenly, they were not.

  -doesn't seem to be a problem of GPIB cable. I tried different cables... same cable will be allowed to connect to a single instrument, but when I use it to connect to this particular Keitlhley instead, none of the instruments can be found.

  Also, I just noticed something, don't know if this is important... for my GPIB-USB-HS, the 'Ready' light always seems amber glow... it is never green. And never seems to light 'Active' lights... even if I send orders to the instruments.  Not sure if it of important or not.

  OK, I seem to have solved that problem. I changed address GPIB instrument troublesome Keithley to a number much more than the other instruments (e.g. addr 30 and other instruments were 10, 11, 12, etc.) and it worked. I don't know why it didn't work until he was NOT an address conflict (it was originally addr 9 and no other instrument has this address and it worked fine... just one day he complained there are too many listeners and he could not see what be it... strange. just this announcement here in the case where he helps to anyone.)

• Sudden error using the creator of selections

  I have been using creative sanse of selections for Sansa e 200v1 for awhile.  All of a sudden, when I try and add a name to my playlist it comes back with an error message:

  "Wrong file or number name.

  No idea why this is happening?

  I used the playlist Sanse (even if it has been awhile) before and can't say I never had this problem. Your player is connected in MSC mode? Are you sure you have refreshed or updated the program after the connection, so this lookiing for a list of songs on the player and/or the card? You could try adding a song that is still in the list of the last time you used the program, but has since been removed from the drive.

• BI Publisher displays sudden error during planing

  Hello

  my bi publisher 10.1.3.42 installation suddenly shows an error I want to blow up a report.

  I want to schedule a report with the bursting of the parameters, what has worked up to 1 year.

  Yesterday I called a new radiance and the editor displays this message:

  Beim plan of jobs ist ein Fehler aufgetreten. If please check working hours and dates active.

  What is the reason for this error?

  What is suddenly disappeared?

  Thank you very much for the help.

  Concerning

  Frank

  Found the solution by myself.

  There were tables for the missing Scheduler.

  Solution:

  Create a new user with create session, create a table, rights of unlimited tablespace.

  After that start installation scheme within the Publisher's site.

• Spotlight 10 dir - sudden errors on MacBook Pro

  Yesterday a coupe of users had script errors after installing an interactive on a MacBook and MacBookPro, when starting an application that I distributed for several years now. It's a 10.1.1 projector (all updates), using a quick startup stub movie. All Xtras are distributed inside my Installer and placed in an Xtras folder. I probably had over a 1000 Mac users install different versions successfully over the past years, and then each student runs the application during one hour per week during the school year. It worked successfully on all variants of Mac machines - G4, G5 and Intel boxes.
  
  After reports of problems, today, I started a new test this year Installer (which appeared all worked on 7 or 8 Mac test great) to try to track down the problem suddenly. Had no errors on an iBook G4, iMac G5, or my Mac Pro Quad-core. But of course, I also had a script error on my MacBook Pro, I had not seen before! And to complicate things even more, a second program (which uses a similar configuration) that has been installed successfully on my MBP in July now also gives the same script error at startup. Note that this laptop is not my main machine and sees light use these days.
  
  After many tests (at first thought, this could be a problem with my new installer), I noticed that a tiny dialog box appeared on the screen for a split second, then disappeared. Part of my projector (1024 x 768) then appeared in the same dimensions as this dialogue, then the script error came. I used a screenshot program to save the movie at 30 fps, and after a few tests was able to get the following screen shot:
  
  http://www.aufgehts.com/images/AG_SW_error.jpg
  
  I am completely confused because there is no need to download Xtras - after 8 hours of investigation I still have no idea what's going on. Both my MBP and the MP have 10.5.4 with all the latest updates, and another Member of the team with a MBP and 10.5.4 is able to run the program successfully. I tried to reset the permissions for the folder of the application, but without success.
  
  The projector has no need to download any Xtra extensions (this option is NOT turned on in my projector / window settings Xtra). I thought it might be a problem with a player Shockwave 11 so I uninstalled just in case. In addition, we tested the MBP that has no installation SW 11 and Shockwave 10 uninstalled errors and this another MBP had no problem. The projector is a normal that does not need to download a player SW (more it is configured to run with SW 10), so it should just start with Rosetta, find the Xtras folder and run normally.
  
  Someone at - it had similar problems or have a hypothesis for what might happen? Any ideas will be appreciated!
  
  
  
  

  Thanks for the comments - it was the permissions problems and nothing to do with the MBP. Had to have one user to reinstall a new copy of OS X 10.5, but I assuem that their entire system must have been in a very bad state.

• Why am I suddenly error: Event ID 7030 Interactive Services?

  Hi all. I'll get to it:

  Windows 7 64 bit

  We have a program that runs at startup. On this machine special 64 bit, it fails to boot with the error message "XXXX met now error and will output. Please contact your administrator. »

  Start the program manually results in the same error.

  The solution I've seen thrown around is to go to Services > XXXXService properties > connection tab > uncheck "Allow service to interact with desktop" and restart.

  This solution A) does not work for me and B) does not work in our environment, even if it did not stop the error.

  We never had this error before with any service. This software is on almost all of the 32-bit machines and three or four 64-bit machines. I have never seen it before. I have never tested with interactive services options or settings. I have not installed anything out of the ordinary on this machine I know.

  If this error whence? What might have cause to start when he never came on any machine before appearing on this machine? If anyone knows where I can start looking for, I would appreciate you saving me who knows how many hours of the dig, I need to do or reinstall. Event in the following newspapers:

  Error
  Source: Service Control Manager
  Event ID: 7030

  Service XXXX is marked as an interactive service. However, the system is configured to not allow interactive services. This service may not function properly.

  Thanks for your time!

  Hello Joe,

  Thanks for the Microsoft Community assistance approach.

  -Is the computer connected to a network domain?

  If Yes, then the right place to contact you is TehNet support. I suggest that you at TechNet support for more information about the issue.

  http://social.technet.Microsoft.com/forums/en-us/newThread?category=&Forum=winserverManagement

  I hope this helps you to get the problem resolved. If you have other problems with Windows in the future, please post in the Microsoft Community. We would be happy to help you.

• Sudden Error 403 forbidden on Test Recordset

  
  
  I have a wiered problem that just started playing last night. I have used with success DW to create my web site www.URTournament.org for a while now and I could already use all the features without problem.
  
  Now I can always connect to databases and to browse the DB schema via db server behaviors browser, but when I goto links or recordset > test it gives me a 403 Forbidden error.
  
  If I change the mmhttodb permissions, php to 644 to something else it errors with a 500. So I can't use the sloutions written that I've seen online. I know that some people have runinto this, but no answers have been posted online. Help, please. Thank you.

  When this happened to me, it was a problem of server security. Have your folk server check the configuration of the script (CF, PHP, etc.) files.

  In fact, they had to move me to another server (with a fresh installation) to get this working.

• Sudden error message Dreamweaver CS3

  After years of using Dreamweaver CS3 suddenly he decided not to open. He said the license for this product has stopped working and I had to uninstall and reinstall or contact Adobe customer support. They refuse to help since CS3 is no longer supported.

  If I'm going to reinstall it. Any help would be greatly appreciated.

  Jon

  Have you tried CS3 download & installation from the web site and activate it with your serial number?

  Download the CS3 products

  Keep in mind, CS3 is no longer supported.  It is 11 back in 2015 CC versions.  The most recent operating systems does not support it.  So if you use software, do not upgrade the OS of your computer.

  Nancy O.

• Characters in numeric columns and dml error logging

  Hello

  Sometimes we get the data from the erp system which has the wrong data type for example number of year issue 99.99% of the digital time - character from time to time

  While mandatory record integrity constraints can be used and what Paris way to handle errors. dml - recipient data must have this column in the numeric form

  
  

  We could filter these records.

  
  

  With the help of 11.2.0.3

  
  

  Just wondering if any new features would allow it - don't think that put a shadow dml error logging table would work.

  
  

  Thank you
  

  Nordine:

  Not a sure grip.

  SQL > WITH test_data LIKE)
  2. SELECT "100" val FROM dual UNION ALL
  3. SELECT "101" val FROM dual UNION ALL
  4. SELECT '10' a2 dual UNION ALL val
  5. SELECT "1 b 03" dual UNION ALL val
  6. SELECT "a" dual UNION ALL val
  7. SELECT val '104' UNION double all the
  8 select ' #$% @* "( double val).
  9 select * from test_data
  10 where UPPER (val)! = LOWER (val);

  VAL
  -----
  10A 2
  1 b 03
  one

  @OP

  Why don't you use record to deal with incorrect data errors.  It is simple and reliable and allows you to easily connect the lines 'bad' for analysis or to beat people in the source over the head with.

  John

• Errors during insertion and update form using the VIEW.

  Here is my opinion:

  CREATE OR REPLACE FORCE 
  VIEW  "SH_ADD_EMPLOYEES_VW" ("EMP_ID", "DEPT_ID", "JOB_DESC_ID", "EMPNO", "EMP_FIRST", "EMP_LAST", "USER_NAME", "USER_INI", "DEPTNO", "DEPT_DESC", "ROLES_ID", "ADMIN", "CREATES", "APPROVES", "QUALITY", "CUST_SVC", "SH_LOCAL", 
  "SH_OFFICE", "SYSTEM") 
  AS
    select
  "SH_EMPLOYEES"."EMP_ID" as "EMP_ID",
  "SH_EMPLOYEES"."DEPT_ID" as "DEPT_ID",
  "SH_EMPLOYEES"."JOB_DESC_ID" as "JOB_DESC_ID",
  "SH_EMPLOYEES"."EMPNO"  as "EMPNO",
  "SH_EMPLOYEES"."EMP_FIRST" as "EMP_FIRST",
  "SH_EMPLOYEES"."EMP_LAST" as "EMP_LAST",
  "SH_EMPLOYEES"."USER_NAME" as "USER_NAME",
  "SH_EMPLOYEES"."USER_INI" as "USER_INI",
  "SH_EMPLOYEES"."DEPTNO" as "DEPTNO",
  "SH_EMPLOYEES"."DEPT_DESC" as "DEPT_DESC",
  "DOC_ROLES"."ROLES_ID" as "ROLES_ID",
  "DOC_ROLES"."ADMIN" as "ADMIN",
  "DOC_ROLES"."CREATES" as "CREATES",
  "DOC_ROLES"."APPROVES" as "APPROVES",
  "DOC_ROLES"."QUALITY" as "QUALITY",
  "DOC_ROLES"."CUST_SVC" as "CUST_SVC",
  "DOC_ROLES"."SH_LOCAL" as "SH_LOCAL",
  "DOC_ROLES"."SH_OFFICE" as "SH_OFFICE",
  "DOC_ROLES"."SYSTEM" as "SYSTEM"
  FROM "SH_EMPLOYEES" "SH_EMPLOYEES", "DOC_ROLES" "DOC_ROLES"
  where "SH_EMPLOYEES"."EMP_ID" = "DOC_ROLES"."EMP_ID"
  /
  
  

  Here's my trigger (note - I do not use the EXCEPTION clause or (declaration of it) because it throws an error msg = >: 'This is my message'.) Here, any help would be great as well.)

  CREATE OR REPLACE TRIGGER bi_ADD_EMPLOYEES_VW
  INSTEAD OF insert ON SH_ADD_EMPLOYEES_vw
  for each row
  declare
  duplicate_info EXCEPTION;
  PRAGMA EXCEPTION_INIT(duplicate_info, -00001);
  begin
  insert into SH_EMPLOYEES
  (EMP_ID, DEPT_ID, JOB_DESC_ID, EMPNO, EMP_FIRST, EMP_LAST, USER_NAME, USER_INI, DEPTNO, DEPT_DESC)
  values
  (:new.EMP_ID, :new.DEPT_ID, :new.JOB_DESC_ID, :new.EMPNO, :new.EMP_FIRST, :new.EMP_LAST, :new.USER_NAME, :new.USER_INI, :new.DEPTNO, :new.DEPT_DESC);
  insert into DOC_ROLES 
  (ROLES_ID, ADMIN, CREATES, APPROVES, QUALITY, CUST_SVC, SH_LOCAL, SH_OFFICE, SYSTEM)
  VALUES (
  :new.ROLES_ID, :new.ADMIN, :new.CREATES, :new.APPROVES, :new.QUALITY, :new.CUST_SVC, :new.SH_LOCAL, :new.SH_OFFICE, :new.SYSTEM);
  EXCEPTION
   WHEN duplicate_info THEN
    RAISE_APPLICATION_ERROR (
     num=> -20107
     msg=> 'Duplicate employee');
  END bi_ADD_EMPLOYEES_VW;
  /
  
  

  ERROR ON UPDATE:

  ORA-20505: DML error: p_rowid = 1001,.
  p_alt_rowid = EMP_ID, p_rowid2 = 2, p_alt_rowid2 = ROLES_ID. ORA-01779: cannot change
  a column that is mapped to a table not preserved key

  ERROR WHEN INSERTING:

  ORA-01400: cannot insert NULL in
  ("SPICE_HUNTER1". "" "" SH_EMPLOYEES '. "" EMP_ID") ORA-06512: at
  "SPICE_HUNTER1. BI_SH_ADD_EMPLOYEES_VW', line 3 ORA-04088: error during execution
  relaxing ' SPICE_HUNTER1. BI_SH_ADD_EMPLOYEES_VW' ORA-06512: at
  'SYS. WWV_DBMS_SQL', line 549 ORA-06512: at "APEX_040000.WWV_FLOW_DML", line 1121
  ORA-22816: feature not supported with RETURNING clause

  Error Impossible to process line on table SH_ADD_EMPLOYEES_VW

  I see you manage emp_id is null, you must assign a value if null sequence... This column cannot be null, where the error, and "Edit" a column of this table the DML to this id value.