Suggestion for the upgrade of the BIOS/MMIC C200-M1 path

I have a UCS C200 - M1 v1.1 MMIC and BIOS of C200M1.1.0.4.0 server.  As I am not familiar with the UCS servers, I'm looking for a way to upgrade suggested the latest versions.  I know I have to do a manual upgrade at this point.  I do intermediate steps before entering the latest versions?  When can I use the utility to upgrade host?

Thank you

Karl

Hello Karl,.

Yes, it takes two or three steps to get the updated system level to the most recent version.

Latest version is 1.4.3p for server C200 M1

Download link

http://www.Cisco.com/Cisco/software/release.html?mdfid=283860963&flowid=25802&softwareid=283850974&release=1.4%283p%29&relind=available&rellifecycle=&RelType=latest

Upgrade procedure

(1) move individually MMIC and BIOS to 1.3.2j

http://www.Cisco.com/Cisco/software/release.html?mdfid=283860963&flowid=25802&softwareid=283850974&release=1.3%282j%29&relind=available&rellifecycle=&RelType=latest

Download MMIC via TFTP server and activate it

BIOS upgrade instructions

http://www.Cisco.com/en/us/docs/unified_computing/UCS/c/SW/BIOS/b_Upgrading_BIOS_Firmware.html

(2) upgrade to version 1.4.1c through the host upgrade utility

Download link

http://www.Cisco.com/Cisco/software/release.html?mdfid=283860963&flowid=25802&softwareid=283850974&release=1.4%281C%29&relind=available&rellifecycle=&RelType=latest

3) go to 1.4.3p via HUU

With the help of HUU

Start the server off HUU image and select option 8 to update firmware for all components

http://www.Cisco.com/en/us/docs/unified_computing/UCS/c/SW/lomug/1.4.x/install/b_huu_1_4_3.html

HTH

Padma

Tags: Cisco DataCenter

Similar Questions

  • CQ61-313us: maestro also needing help code is 75957252 for the bios password reset

    Maestro also needing help code is 75957252 for the bios password reset

    Check your other post. I answered here.

  • Y at - it a default password for the bios on a Compaq tc4400? Need help!

    There must be a way to remove a unknown password!  I disassembled the laptop and removed the battery cmos for 3 hours and it didn't work.  There must be an easier way.  There should be a default password for the bios of HP or Compaq?

    Welcome to Alzur.

    How to cut the power on password or bios password is easy.

    Remove the battery and power supply.

    Remove the memory cover. "On the merits".

    Remove the memory stick. "If there is."

    You should see a label and a piece of plastic tape.

    Peel off the tape and you will see CMOS_CLR1.

    Use small flat head screwdriver and make contact with the 2 copper looking contacts.

    Replace the tape in plastic, memory, memory and battery.

    Power and missing BIOS passwords.

    Just tested it and it worked very well.

    Tell us what you find.

  • HP Pavilion G60-458DX - Suggestions for the wireless card must be upgraded to 802.11n

    Nice day! I hope that all have a nice time. I have a HP Pavilion G60-458DX running Vista. I want to upgrade the wireless card/adapter to support 802.11n.  I would appreciate suggestions compatible.

    Thank you and enjoy all!

    John B.

    Hi, John:

    Here is the link to the service manual for your laptop.

    http://h10032.www1.HP.com/CTG/manual/c02985882.PDF

    Looks like the only available wireless N card's network without WIRE Atheros AR9280 802.11a/g/n map.

    Please see Chapter 3, page 3-7.

    Make sure you get this model with the applicable B21 HP for the country you live.

    For example: If you live in the United States you need part # 482260-001.

    The part is available new from HP for US customers for $63,54.

    My advice would be at the request of the part # on eBay and get a model used but tested this card for a lot cheaper.

    Here is a list of the card used for people living in the US.

    http://www.eBay.com/Sch/i.html?LH_BIN=1&_sacat=0&_FROM=R40&_nkw=482260-001&_sop=15

    No other N Wireless card will work but this one.

    And the card must have the part number HP on it or it won't work.

    You also have a great day!

  • HP Pavilion g6-1311ax Notebook: password for the bios HP Pavilion g6-1311ax Notebook PC gives me a code of 55054770 locked out

    password for bios HP Pavilion g6-1311ax Notebook PC gives me a code of 55054770 locked out, after the installation of Windows 10 upgrade.on window7 it worked fine, I never put a password. need help to get into the bios I thank you again once the code, bios gives me is 55054770

    Try to enter

    40932376

  • To replace the DVD drive with the second HARD drive on the Probook 6570 b as for the BIOS setting

    After you replace CD/DVD player with HARD drive in the Bay of correspondence, I had a problem with the BIOS. After starting, I received a message 'there is not a boot manager' and CTRL + ALT + DELETE. So is that posible F9 and start to use Option manually hard. Please tell me what I should do to fix this problem.

    Thanks for your advice. I remember what I had to do in the BIOS. I had to choose the Boot Option and excludes "Boot from Bay upgrade". That's all. Of course subsequently followed "save all".

    in respect

    Military

  • Suggestion for the new private browsing feature

    Sorry I post here, I have not found where suggestions could be published. I wanted to ask if it is possible also to open in new window private to be added open in a new tab private for people who prefer the opening of new tabs instead of new windows?

    Hello

    The people who answer questions here are for the most part, other users Firefox dedicating volunteer their time (like me), not employees of Mozilla or Firefox developers.

    If you want to leave a comment for the developers of Firefox, you can go to the Firefox help menu and select submit comments... or use this link. Your comments gets collected at http://input.mozilla.org/, where a team of people read it and collect data on the most common questions.

  • Password for the Bios M30 - 742 satellite problem

    I have a Toshiba laptop (model No. Satellite M30-742), bought on May 26, 2004.
    But I forget the CMOS password.
    Without entering the password, it is not possible to start the laptop.

    I have also contacted to your "Redington India" service centre in Kanpur (India).
    But they are unable to solve my problem.
    I know that my laptop is now out of warranty.

    So, I'm willing to pay for it.
    Please help me to start my laptop.

    Laptop model Satellite M30 742
    Model number PSM30E-7100V-EN
    Series No. 44095636P
    Windows XP operating system

    Thank you
    Dinesh.

    Hello

    The unknown BIOS password cannot be deleted or removed easily.
    The unknown BIOS password can be removed ONLY by a certified maker Toshiba.

    To my knowledge, the Satellite M30-742 PSM30E-7100V-EN was released in Europe (probably for the British market)
    Then, probably, you should contact the ASP from Toshiba available to the United Kingdom in order to remove the BIOS password.

    Here is a link to all Toshiba ASP available worldwide:
    http://www.Toshiba.EU/innovation/generic/ASP_SUPPORT/

  • Re: Portege M700 - download link for the BIOS does not

    Tried to download the file to update the BIOS for Portege M700 on the Toshiba site with no luck. The file is 1: 60 - WIN. No luck. Is the link down or something? Could someone please try?

    Hello!

    I agree with zuja.
    I tried to download the BIOS for Portege M700 and now it works.

    Now you can update the BIOS. :)

    Good bye

  • Ask my Portege 7020 CT at startup for the BIOS update disk

    I have a Toshiba Portege 7020CT and he will not start to the top as it does for a bios update disc be inserted into the floppy drive, and then press any key.
    Can someone explain had to get the disc to update bios please and how to fix it? Thank you very much.

    The BIOS should be available on the Toshiba driver page.
    But it of very strange that the unity of request the update of the BIOS.
    Did you get the error messages as RTC battery is empty or something like that?

    Try to enter the BIOS and try to set the bios to the default options and then save the settings and try to restart the laptop.

  • Pavilion Mini 110: Mini 110 suddenly invite you for the BIOS password after hard drive failure

    After mini disk failure hard full sat for a long time. So, I'm going to replace hard drive today and it is stuck on the screen of the BIOS password! After that 3 wrong attempts it gives an error CNU9283Y90

    I tried to unplug the CMOS battery, wait awhile, and then tie... no go!

    Can anyone help!

    TIFF

    TIFF.

    Enter e9lo7ufio1

    Use this code to go into the BIOS.

    Disable all passwords that are enabled.

    If demand for CURRENT password using this code.

    Request NEW password just press ENTER.

    If asked to hit just to CHECK password to enter.

    Save and exit.

    REO

  • Beep of password for the BIOS boot

    Greetings.

    Currently, using Compaq Presario V3337TU, I just put the startup password in the BIOS. He invites password every time is (once short) loud beep. It is disturbing the people around me and then, in public places. Currently using the latest version of the BIOS: F.39. Anyway he cut?

    Kind regards

    Brandon Lee

    Hi @TICORP,

    Thank you for visiting the Forums HP's Support and welcome. I have studied your Compaq Presario V3337TU notebook and not wanting to no sound at the start of the BIOS. Unfortunately if you disable in BIOS your sound will work not on the laptop at all.

    Here is a document to restore the BIOS to the previous version.

    Hope this helps you.

    Thank you.

  • Spectrum of HP x 360: password for the BIOS default administrator

    I'm doing a BIOS update.

    HP support assistant tell me there's an update of the BIOS available. Many attempts to install it all failed. The installation continues for hours and never complete.

    I thought that I would like to download the file to update the BIOS on the support site and install it manually. I typed in the serial number of my computer, so the site could identify relevant updates, but this failed with a 'unable to detect"error message.

    As a result, I was introduced to three different updates to the BIOS and no way to decide which did not suit my system (two of them have the same date, so goes the latest isn't the problem).

    I thought I would go into the BIOS of the computer to see what version is currently there, hoping that would tell me what the update is appropriate. Then asked me a password. I don't know what is the password.

    I looked at the manual in the hope of finding a default password. The manual says:

    "If the BIOS is protected by an administrator password, enter the password"

    Very useful. Enter the password. I would have never thought it. But what is the password or where I can find it?

    Note that I never put a password, so there is no chance that it is something other than the default.

    Hello

    The last revision of the Bios listed for your laptop is F.32 Rev.A (March 7, 2016) on the following link.

    http://ftp.HP.com/pub/SoftPaq/sp74501-75000/sp74985.exe

    About the bios password, it's a bit confusing - your laptop is listed as a model of consumption, while HP SpareKey is a facility for the books of class business, so maybe I need to think it more

    Kind regards

    DP - K

  • for the bios HDD test what is failure id: 9GE399-559609-XD6U3G-60R103 average?

    My computer laptop girls crashed after watching a movie she downloaded from the internet, the screen only I get is launching repair of windows 7 and windows boot screen 7.  If I go to repair screen about half an hour later I get a blue screen, and if I go to the windows start screen I get a black screen.  I tried deleting antivirus programs but no avail, any suggestions?

    Duane

    Hello

    This is a code generated by the "F2" diagonistics integrated. In this case, this means that the HARD drive has gone wrong and needs to be replaced.

    If you see a failure code after the full system diagnostic tests, write it down and contact HP support. Otherwise, the agent may ask you to go through the process of diagnostic test again to get the failure code.

    The failure HP code contains four fields of six characters each, such as XXXXXX-XXXXXX-XXXXXX-XXXXXX, where X is an alphanumeric character.

    Have a failure code does not mean that your computer is still under warranty. The date of start of guarantee on the computer determines if it is still under warranty. The agent can help you with this when you contact HP.

    The BIOS displays error codes and messages. The error code consists of two parts. The first byte represents the field replaceable unit (FRU), and the second byte represents the test that failed. If you receive an error code, contact HP with the help error Code

  • How to request a new software added to the software suggested for the unknown file extension?

    Hello

    When a file is opened on Windows with an unknown extension, there is an option to 'search the Web '.

    This option opens the Microsoft Web site with a list of software that can help you work with this new file format.

    We have developed a very good video converter that can be associated to several file extensions in Windows.

    Do you know how and which Microsoft, I must ask our software to add to the list of extensions on the Microsoft Web site?

    For example, the list for the MP4 extension can be seen here:

    http://shell.Windows.com/fileassoc/0409/XML/redir.asp?ext=MP4

    You can see that there are several software listed there. How an application can be made to add our software in the list?

    Thank you.

    Hello

    Thanks for posting the query on Microsoft Community.

    This problem may be the best answer by MSDN Forum. Then I suggest you post in the MSDN forum.

    https://social.msdn.Microsoft.com/forums/en-us/home

    In the future, if you have problems with Windows, get back to us. We will be happy to help you.

Maybe you are looking for