To replace the DVD drive with the second HARD drive on the Probook 6570 b as for the BIOS setting

Similar Questions

• quedtion on EFI which replaced the bios

  Hello

  I read on EFI which replaces the bios and I see that it also has a shell environment.   I want to know in which situations you can use this shell command in EFI and what is the benefit of it.  because for the bios you don't need shell commands.

  Thank you

  Johan

  Hey there,

  Check these stars-

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff545500 (v = vs. 85) .aspx

  http://TechNet.Microsoft.com/en-us/library/cc749064 (v = ws.10) .aspx

  http://uefidk.Intel.com/sites/default/files/SF11_EFIS003_100.PDF

  http://www.sysadminshare.com/2012/01/EFI-shell-commands.html

• dcd5800 sff desktop PC: dc 5800 sff I m not able to change the bios setting

  How to get the password of the bios

  as I m having dc 5800 sff f10 bios password I forgot kindly help as I not able to change the bios setting

  Updated the BIOS will not clear the password.

  You can try pressing and the little button cmos clear yellow with the jumper removed password and see if that does anything.

  I think that the motherboard has a problem because removing the rider of P/O should have removed the password.

  Now turn you on the PC with the jumper removed, correct?

  You turn off the PC and unplug him.  You then remove the jumper P/W and then turn on the PC.

  That's when the P/W should be cleared.

  Then you shut down the computer, unplug and replace the rider of P/W.

• Satellite Pro A30: after disk HARD replacing the BIOS does not see DVD or HARD disk

  Hello

  I bought a new Pro A30 of Satellite earlier.
  Shortly after, I noticed the system sometimes
  would freeze, with a rattling of the HD.
  A reboot cold was the only solution.
  I was told to replace the HD I did but the
  problem persisted with the new HD.

  I tried a known working HD and the problem still persisted.
  At this point, the warranty period has increased.
  Frost started happening more regularly, and
  now, the BIOS does not recognize the HD player or DVD.
  It starts and then try to boot from the network,
  because he doesn't have a HD or DVD player.

  At this point, I think I need a new system board.
  Someone at - it other advice or seen this problem
  before?

  Thank you
  Ray

  Hello

  What happens if you remove the CD/DVD drive or the HARD drive?
  The laptop recognizes one of these devices?
  Have you used the devices recommended by Toshiba?

  in any case, this seems very strange and the dysfunction of the motherboard is not impossible

• "Re: Toshiba M10: replacement 7 k 200 with Advanced Format HARD drive" 7 K 750 HDD

  Can we see problems with the replacement of the original Hitachi TravelStar 7 K 200 (200 GB) HDD, that went into my two year old Toshiba Tecra M10 - 11 X, with a so-called 'Advanced Format' 7 K 750 (750 GB or maybe 640 GB) hard drive?

  Like the original, I want to dual-boot the new disk using three partitions:
  * Windows 7 32-bit
  * Data
  * Windows XP
  and would probably clone one disk to another (by increasing the size of the partition!) with the v5 of Macrium Reflect.

  I read up on top of the TravelStar 7 K 750 form, the alignment tool from Hitachi, Microsoft KnowledgeBase article 982018 "an update that improves the compatibility of Windows 7 and Windows Server 2008 R2 with the Advanced Format drives is available" Bit-tech http://www.bit-tech.net/hardware/sto...t-hard-disks/1and so forth, but wonder if anyone has actually replaced the HDD with all original Advanced Format drives and could therefore have a certain experience to share?

  Thank you!

  Hello

  "I put t have experience using this advanced Format ' 7 K 750 HARD drive but in my opinion he should not a problem using this HARD drive.
  The laptop supports the SATA interface and if this HARD drive would also support the SATA controller, the HARD drive should be recognized too

  But of course, it is my personal opinion...

• BIOS update failed on Satellite Pro A60 - how can I replace the bios chip?

  Hello, I'm in trouble of deeep.

  I tried to update my bios but something went wrong
  during the process and now the laptop does not start.
  (when I try to activate the satellite, nothing happens)

  I have to desolder the bios and replace it with a new?

  Is there an easy way to simply delete it?

  Please help me!
  Thank you

  Sorry but I want to just ask you a question: how far are you with laptop computer and technology of BIOS?

• CD/DVD drive, it is not supported by Windows XP and Bios

  I bought a new Mat * un Panasonic cd/dvd player.
  It only works on Windows 2000, it is not supported by Windows XP and Bios, so I can't start with.

  Could you please provide some information about yourself (name) for laptop?
  Did you buy this player or that player supplied with the notebook?

  If the player is not berecognised by the BIOS, then in my opinion, the drive supports bad master / slave / parameters c - salt.
  You should know that not all drives are compatible.

  Cannot change settings as the dose of disc supports not no rider, but only the firmware.

• Satellite L70 - A - 13P - cannot get into BIOS after the BIOS setting password?

  HI, Satellite L70 - A - 13P

  I set up a password user and supervisor. Works very well. However, I can't get into bios. If I press F2 as usual, I have the box "enter password" (the same as for normal startup). After you type the password for the supervisor, computer continues initializing and do not get into the bios!

  I keep the key pressed F2 but nothing works.
  I also tried ESC, F1, INS, F12, 0.

  Help.

  User and supervisor password the same?
  Have you been able to get into the BIOS in the past?

  Proceed to a complete stop and restart the laptop. Then try with F2 or F12. When you will be asked to set supervisor password and I hope that you will be able to enter the BIOS settings.

• How to access the Bios setting?

  Anyone know how to access the Bios definition please?

  Thanks in advance for your help.

  Hello

  First of all, it would be very interesting to know what unit you have.
  Generally, it should be possible to get into the BIOS by pressing ESC then F1.
  Try it.

  Good bye

• Dell Media Direct uninstallation/replacement CD/DVD drive

  Inspiron 1720 Dual Core T7500, 2 g of Ram, Windows Vista Home Premium, Twin HD 150 gs each.

  1 would it not possible to remove Dell Media Direct and replace it with Power DVD or Win DVD without causing major problems.

  2 are better it CD/DVD rewritable drives for laptops the TSSTcorp-DVD + - TS - L632H - ATA Device. It makes everything a lot noise and sometimes sounds as he struggles to start.

  I would like suggestions.

  Dowdow.

  
  

• Pavilion 550-035z: replace a DVD drive in my desktop PC

  Hello

  I am wanting to upgrade the DVD player that came with this PC.  It is mounted vertically, thinner than the standard.  I am eager to find a player more rapid combustion.  The current DVD's HP TSST DVDRW SU-208 HB SATA.

  I'm looking for what kind of model?

  Thank you.

  Dean Mieras

  Models that in size 9.5 mm are 6 x or 8 x burn. Reading is 24 x.

  Your computer, DVD player, spec to even, a USB3.0 external hard drive.

• How to replace the timeout set on the message in Weblogic 10.3.3

  Life is set on the message by the message producer. The message is sent to a Destination imported FAS in a field and then transmitted to the destination stone on another remote server in Weblogic.
  The value of life is defined as 7 days on the message of the message producer. I would like to replace with a much shorter duration. The following steps have been completed,
  1A allowed SAF SAF destination queue default Time-to-Live
  2 FAS by default, Time-to-Live is set to 10 seconds on the destination queue parameters
  3. set the default Time-to-Live to 10 seconds for the factory of connections in queue on the remote server (where the destination queue)
  But the message expiration date remains that 7 days, the original value. I missed something? How can this be accomplished?
  
  Thank you
  Hong

  Hmm, it should work then. Do you have any substitution of time-to-live on the remote destination?

• How do you know hyperthreading enabled or disabled on the Windows 2003 EE server without restarting the server to the BIOS setting

  a small question:

  I have a server with AMD64 (8 CPUs), ~2.3GHz, I want to know if Hyperthrreading is enabled or not, how can I check the setting without restarting the server?
  I am about if HT enabled will allow the server to get better performance?
  Thank you
  -Mulu

  Hello

  The question you posted would be better suited in the TechNet support forum. I suggest you to post the question on the following link.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Satellite L650 - 10 H - replace the optical drive of a second HDD/SSD?

  Hello
  Is it possible to replace the DVD burner with a second hard drive or an SSD?

  Thank you
  Michael.

  Hello

  First of all I don't know why would you refrain from ODD... I always use ODD and it fail...

  Well, some laptops as Tecra has supported this feature.
  For that you need a special envelope where the HARD drive is placed.
  This Chamber was placed in the Bay of ODD.

  But I m not very well if L650 model that would support personally I doubt it would work because of the controller on the motherboard.

  However, if you want to be safe, I would recommend an ASP in your country you asking if a compatible box be available satellite L650.

  Welcome them

• I have Acrobat 9 Pro.  Can I switch to Acrobat DC of that?  Also, if I buy the product with a CD/DVD, can I also download online.  I don't have a CD/DVD drive.

  I have Acrobat 9 Pro.  Can I switch to Acrobat DC of that?  Also, if I buy the product with a CD/DVD, can I also download online.  I don't have a CD/DVD drive.

  upgrade price is available for acrobat x and xi, Plans and prices | Adobe Acrobat DC

  If you have:	Upgrade to Acrobat Standard DC	Upgrade to Acrobat Pro DC
  Acrobat Standard DC		US $199. 00
  Acrobat X or XI Standard	US $139. 00	US $199. 00
  Acrobat X or XI Pro	US $139. 00	US $199. 00
  Acrobat X Suite	US $139. 00	US $199. 00

  Acrobat 9 and earlier versions, as well as Acrobat Reader, are not eligible for upgrades. Subscription customers are not eligible for the perpetual license price update. To access all the tools Acrobat and Document cloud services, consider a subscription Acrobat DC.

  and Yes, you can download.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.3|  6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".