Hypens - manual control

Similar Questions

• My iPhone is stuck in headset mode.  It's the THIRD phone that has had this problem.  Why Apple won't be a manual control of the headphone plug in the software?

  Manual control for the headphone feature is required for the software.  I have had THREE phones to do exactly the same thing and I don't even use the headphones - I have a speakerphone bluetooth and headphones, so it is inexplicible why my phone would enter the headset mode and do not release the mode headphones - do not let me do a phone call that is not involving the speaker.  Apple insists on the fact that this problem is not common, but it happened to 100% of the phones that I have owned.

  doctortroyp wrote:

  Manual control for the headphone feature is required for the software.  I have had THREE phones to do exactly the same thing and I don't even use the headphones - I have a speakerphone bluetooth and headphones, so it is inexplicible why my phone would enter the headset mode and do not release the mode headphones - do not let me do a phone call that is not involving the speaker.  Apple insists on the fact that this problem is not common, but it happened to 100% of the phones that I have owned.

  It is not common in the vast majority of users.

  If you wish to have a such feature manual control available, http://www.apple.com/feedback/ will be a good resource for this comments.

  Otherwise, try to restore your iPhone as new and not a backup test to see if the problem is back by restoring your backup on each of these phones.

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

• can't manual control zone schedule macbook air

  I have a Macbook Air with El Capitan 10.11.4 - I'm UNABLE to manually control zones. The time zone setting has "automatically detect zones" checked and it won't let me uncheck. " Anyone know how I can uncheck this? I operate in multiple time zones and have my Mac change on me is very confusing (just today a meeting was moving 5 hours - the exact time difference between the United Kingdom and new YORK, and here I am at 5 o'clock in the morning meeting).

  Thanks for the tips!

  When you say that you can't uncheck, do you mean because it is grayed out? If so, click on the padlock at the bottom of the window to activate the change.

  See you soon,.

  GB

• A lost manual control of exposure in mode manual 5Dmk3

  Never changed the settings as far as I know. The day before I was shooting photos with full manual control in manual mode. I packed my camera and when I picked up once again, manual mode now behaves like automatic mode when you try to take pictures. It's self in the LiveView. I can see change LiveView as I move the camera around and I can't change the ISO or the opening of the exhibition. I can make up the ISO menu and select different ISOs, but the image does not change. When I turn the steering wheel opening command, the f-stop on the screen number changes, but in the lens blades do not move and nothing changes.

  I still have a manual control total when I switch video mode, this happens only in photo mode.

  Here's a short video that shows the issue I'm having.

  http://youtu.be/kQN-H2Qwsu4

  EDIT: Just noticed something. It seems that the device will take the image with the settings I chose, but will not display what looks like this exhibition in the LiveView. When I enter the picture mode the opening wide stay open no matter what I do, I can look into the lens and see that the aperture blades are all open. If I put the opening to F10, exposure does not change in LiveView and the blades do not move, but when I press the shutter, the blades in place for a split second then take the photo to F10 and lance return back for large open. Same thing with the ISO. So I guess I still have manual control, but it is not very good for me if I saw what looks like this exhibition in the LiveView.

  ?

  The blades stay open until shooting. However, there is a way to stop down to see what things will look like without shooting. The depth of field Preview button is located on the side of the lens to the body almost mounting area opposite the release button. . According to my manual is downloaded, it is covered by the news on page 165.

• Manual control of charging battery for notebook

  Hello, is it possible to manually disable my laptop in charge battery?

  What I want to do is to store 100% charged the battery on the laptop, but they have the laptop powered only via the AC charger. It is important that the laptop is trying to charge the battery at any time while in use without determined action from me. The operating system is windows 7. I realize that this question may seem without purpose more, but if it is possible to keep the battery installed on the laptop using the AC charger only using the software, it would be great. I read that the ACPI Microsoft control battery method, in the Device Manager can be disabled, but what I've read, I'm not sure whether this action will be enough. I would be grateful if someone is able to answer this question. Thank you very much

  What power is supplied to the system of the laptop works on AC power because the battery voltage will be slightly lower than the AC voltage. However, the power supply can trickle charge the battery at all times even if it is less frequent.

  What tends to happen in practice is when the laptop is 1st turned on even with essentially a completely charged battery some load will take place. This is necessary in order to confirm that the battery is actually charged, the charge current indicates the battery status much better the just measure the voltage.

  The degree of control available to the operating system is very limited with it first and foremost a function of portable electronics (it still applies even if you do not pass).

• Sum of manual control, producing mixed results

  I got a checksum in a header after process for a page of givien via the code below. In a process of the page 'after send', I do the same checksum calculation and comparison with the previously saved item (P10_CHECKSUM) and mingle results for 2 scenarios. In the first case, there is no checksum violations while in the second case, there is a breach (pre and post of checksums do not match). In both cases, the database not touched. Why do I get different results for the same amount of control call, when the database has never touched? Is the code to get the incorrect checksum?
  
  
  declare
  l_cks wwv_flow_global.vc_arr2;
  Start
  Select wwv_flow_item.md5 (Field1, Field2, field3...
  ) cks
  BULK COLLECT INTO
  l_cks
  of atf_header
  where atf_header_id =: p10_ATF_HEADER_ID;
  
  : P10_CHECKSUM: = l_cks (1);
  end;
  
  Alex

  Contrary to what you said earlier, you alter the database session to set the date format. I copied the application before header 'set nls vars' conducted a new who runs after - submit. Now everything works. Also, contrary to what you said earlier, you have three date columns in the query. The problems concerning the registration of 20001 were tc_travel_start and tc_travel_end which are not null in this folder, but nothing in the record of 20,000.

  Scott

• Satellite P100 - 400 PSPA6A: How can I control the fan speed manually

  Good evening

  I would like to know how can I manually control the speed of the fan?
  I ask this question because my laptop rarely use the fan at a higher speed.

  Today, I listened to more than the normal fan, I have check the temperatures and the CPU was Core1:95ºC Core2:99ºC
  I'll clean the fan, but I want to know how can I manually control the fan (of course with the software: P)

  Kind regards.

  Hello

  I guess that the Toshiba Power Saver has been installed on your laptop and you use this software from Toshiba.

  If you are using Win XP and that the GST is installed, then you can check the configuration of basic settings and you might find the options to control CPU, CPU processing speed and method of cooling.

  If you are using Vista, then you should check the Vista Power Options:
  Check this thread how to manage Windows Vista power management features
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=38906&TSTART=0

  But in most cases, the cooling modules are controlled by fan that is stored in the BIOS table.

• No cookie name appear when I press the button 'Show Cookies', which would prevent me from manually delete cookies selectively.

  When I open the Cookies window by pressing the 'View the Cookies' button in Options | Privacy the secondary window displays no name cookie just a series of arrows as for different subdirectories. This has been so for several months, but I have changed no cookie setting and have the "accept Cookies from sites' and 'Accept third-party cookies' checkboxes are checked.
  This means that I can't manually control/delete cookies.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Intermittent Volume on Tecra A2 control

  I have laptop Tecra A2.

  When I got control of the volume (the material that is) has nothing, I wondered what was the point of it.

  Then all of a sudden a few months later he started working, which was really great.

  Now, it has stopped again. I have not the slightest idea why. I searched the manuals, controls etc etc and nothing seems to activate / deactivate.

  Am I missing something or is this a mistake any.

  Hello

  When the control does not work, do you have any sound at all?

  BR

  Tom

• El Capitan keyboard volume control does not

  I upgraded to El Capitan, and now, while volume on the keyboard controls display the volume on the screen change, they have absolutely no effect on the actual volume. I have to manually control the volume within the application (for example, QT).

  I am running OS X El Capitan 10.11.3 on a MacBook Pro for mid-2010, and the volume control on the activity of keyboard perfectly, be it with iTunes or QuickTime Player.

• What is the right way to use variables controlled by the two buttons and programming?

  First of all, I apologize if this has been discussed before.  I know not how to phrase succinctly the application, so maybe I just missed the search terms.

  We have several pieces of the Labview software in the laboratory that automatically control things like the taps and heaters.  Sometimes we also manually control these same things.  I'm moving old NI PCI (and older versions of Labview) maps to a variable and based on compactRIO system shared network.  However, I'm still not on best practices to achieve.  I need to be able to have a script running at any time control panel so that I can access, for example, a valve controller (which is just a Boolean), and I need power open and close the valve by programming other scripts.  I need, of course, the control panel to track the State of the valve until it opens another script, the Panel indicates that it is open, and the next push on the control panel it will close.

  Historically, this has been processed using structures business to move from a "computer control" and "hands-on" with global variables that define the State of the valves.  Of course, this is not recommended.

  So far, I've played with the help of two variables, a status of valve and the other for the State of button.  The Panel configuration then loops, reads the status of the valve and puts the State of button if the State of the valve has changed.  I can do this with registers at offset or with the structures of the event, but anyway, it gets very crowded and seems inefficient.  Is there a good way to do this in Labview?  It seems this is a common problem, so I hope there is an easy and elegant solution that I've missed.

  Variable published use shared network.  Your scenario and your manual of the interface and change the variable and then shared your cRIO reads fair value and writes the appropriate values.

  Now for a cool part.  On your manual interface, right-click on your heart control that you want to use to control the shared variable and go to properties.  There should be a data binding tab in the Properties dialog box.  You can bind a control/indicator to a published network shared variable.  So this button will always be attributed to the current state.

  Your script should just read the shared variable before resuming to verify that it is in the correct state.

• Force the position of a control by using code

  I have a piping diagram on my front in which I place a custom control for a valve of switching on and outside. My program has a number of automated sequences, but also a "manual". In manual mode, I would like to change the State of my cock by simply pressing the control (which looks like a valve on the diagram). This part, I can do now. However, I join in the valve change the State through my code during the automatic sequence - that is to say I want to force control via the code instead of interaction to façade so that my plumbing diagram displays the status of my faucet during the automatic sequence. Otherwise, I could have the valve on the diagram of an indicator instead of a control, but I want the manual control to occur by pressing the valve on the diagram, not elsewhere. So I could do with invisible control at the top of the flag, but I don't know how do either.

  You understand what I'm asking?

  Can anyone help?

  Thank you

  Ron

  If you want something simple, just create a local variable of the control and write to it.

• Control of the E4407B Spectrum Analyzer

  Hi all

  I was using E4407B made by the company Agilent spectrum analyzers.

  Also, I designed the LabView program to control the E4407B.

  But it occurred to me a few question.

  Once I connect E4407B to the LabVIEW program, I couldn't control the E4407B manually until I got disabling it and turn it on.

  Please let me know how E4407B manually control while I connect E4407B to the LabVIEW program.

  Kind regards

  Kwangbog ham

  NURI Telecom

  Material engineer/Assistant Manager

  Electric bike seems like overkill. It is not a button for local or remote? Read the manual for the manual method.

  To do this programmatically, you can try the command GTL or deasserting REN. Either is done with the function of VISA CRTAP control REN.

• Control MFC with NO 6008

  Hello and thanks in advance for any response,

  (FMA-2109 sheet attached)

  I have a regulator flow (Omega-FMA-A2109) mass, which can be remotely controlled (0 - 5V signal) and you also read flow (0 - 5V or 4-20mA output). The controller also has potentiometer on that for the user to manually control the flow. To work around the manual control, you must ensure that there is no jumper between pin 2 # & 5 of the DB9 connector. My problem is that I can read the stream and control it manually no problem but I cannot control the flow from a distance. I use the NI USB 6008 box to read and control the MFC. the manual says to connect the pin #2 and 5 to your variable voltage source so I just plugged in the AO 0 and the LAND of my acquisition of data. When I change my analog output voltage (checked the voltage changes with DMM), the flow rate does not change. But I can always change the stream manually with the pot, which is weird. So I'm not sure what is happening. I also tried to plug a variable power supply (instead of using the DAQ) and control the traffic, with whom, but not luck.

  Am I missing something? This would be a problem of input/output impedance mismatch? Please advise, thank you!

  -Serge

  Hi man,

  Thanks for pointing out that it was a typo. I just discovered that I ordered version only one meter of the CMF, which makes sense why the pot worked, but not the 0-5 VDC control. How dumb of me > _<. oh="" well,="" that's="">

  Must not be A2209-FMA and FMA-A2109.

  Thanks again,

  Serge

• The control unit - until I get starts.

  Gidday,.

  * hope it's the right place in the message boards *.

  I'm designing software in Labview for control device. Editing I design is used to test the buttons on a product.

  The low-level commands are managed by a microcontroller that is round, press x or product removal position y.

  I have drawn a few screws (attached) to generate high level for the microcontroller to process command strings.

  Before that I build the main VI there are two phases. Manual control, where the operator can press the (Boolean) MISTLETOE and make something happen by sending the right order in the microcontroller. Phase II is a cycle where multiply orders will be sent in the order and repeated several cycles (serveral thousand times) ~ a process automated.

  ***

  I would like to know if there is anything that I should know as I proceed with the creation of handmade VI, LabVIEW and the time of long durations (2 months at a time running and the data record).

  Is there a problem with the help of screws custom several times.

  The idea was to use the "stringfunctiongenerator" in a sequence and find only entered the need for local variables.

  Finally, the microphone will return a command 'busy' or 'free' to let me know what happens and whether or not I can send a command.

  I'm attacking the project in blocks. know how to draw coms series vi. plot data logging.iv and then putting them together.

  Hi Kamian,

  People leave labview running for years without problems. You, however, will definitely want to check for problems before you deploy a program memory. A slow memory leak will use the memory on the computer and possibly cause an accident. If you have the tool execution trace for labview installed (check tools-> profile-> execution Trace) you can do this automatically, otherwise just monitor memory that labVIEW uses in the Manager of tasks in a few weeks and see if it is on the rise. The biggest cause of the cause of the leaks memory is people don't close not references to objects. In addition, if you don't store data in a file fast enough you will use until your RAM fairly quickly.

  Your design looks like it is on the right track. You might consider doing your 'Action' control a typedef and an Enum instead of a control of the chain. The typedef will make it easier to update your code and the Enum are easier to perform logic operation with.