Support for UEFI BIOS

Similar Questions

• My laptop supports UEFI BIOS...?

  Hello

  I have the hp dm4 3002tx winows 7 64-bit. Now I want to upgrade to windows 8 but I m confused if my laptop UEFI bios support for windows 8 (secure boot to support etc.)  while I can install windows own 8 other wise I can install it on windows 7.

  Hello

  This model # dm4 3002tx has no bios EFI but you should be able to always install windows 8 on this PC.

  Good luck!!!

• Since the update by Satellite L750 - Win7 for Win10 I lost access to the UEFI BIOS)

  Hello everyone

  Since my upgrade to Windows 10 32 bit Windows 7 32 bit, I am unable to access the BIOS (UEFI).

  I try to access BIOS because I want to do a clean install of Windows 10 64-bit, DVD, or USB key.

  I did the setting-> security update & -> Recovery-> Advanced Startup restart now-> then I clicked on troubleshooting-> Advanced Options-> and I can not find the UEFI (BIOS) settings.

  When I start my computer I lost the option "Press the F2 or F12 key" to access the BIOS.

  Thanks for your help.

  My computer: Satellite L750, PSK2YA-0L0802S

  OK if you are interested in the topic you can try with a facility for testing purposes, but if there are many different issues and problems, I think that you should install the recovery original image again and use your laptop with 'presets' again.

  You can enter the BIOS settings?

  In General, you can try to start the installation of USB if you press F12 on startup and choose USB as a boot device. It works for you?

• HP Pavilion dv7 - 6143cl: UEFI BIOS update for Pavilion dv7

  Hello

  I wonder if there's a UEFI BIOS available for my laptop. I have a HP Pavilion dv7 - 6143cl. The BIOS that is currently installed is F.1B Rev A.

  Thank you!

  Hello

  Unfortunately there is no - F.1B Rev is the latest version of the bios listed for your laptop.  As a general rule, the bios versions uefi began with the dv7-7xxx series.

  Kind regards

  DP - K

• Satellite C870 - 1 H 2 and support for virtualization

  Hello

  I am (was to) buy a Toshiba Satellite C870 - 1 H 2 (from amazon.co.uk).
  The specifications look ideal for me, but at the last moment, I thought to check if VT - x extensions are supported.

  I know that the processor supports extensions (as detailed here: [http://ark.intel.com/products/71465/]), but I know also that the extensions are often not enabled (or there is no option in the BIOS to enable them).

  The expression "Virtualization Technology" (which is present on other pages of the specification) is clearly absent from the plug laptop here: [http://www.toshiba.co.uk/discontinued-products/satellite-c870-1h2/].
  I saw some comments that suggest the Satellite * Pro * series usually provides the support for virtualization, but it always seems to be missing on many current models of Pro's specifications.

  I don't know why the C870 would not support VT - x, when we know that his material, but the specifications indicate that this is the case. On the other hand, I found no references to people complaining about the lack of VT - x support.

  So my question is, the Satellite C870 - 1 H 2 actually does support VT - x, or not?
  (and if not, because it takes just a very small piece of code BIOS, why not?)

  Thank you

  > The same issue applies. These models are supported virtualization

  VT support is always depends on the CPU built in Notepad. But you mentioned it in the first post.
  According to the page of the Ark from Intel, the Intel Pentium 2020 M processor supports Intel Virtualization Technology (VT - x)

• Satellite P840: How to create the secure boot with UEFI Bios recovery disk

  Hello

  I have laptop P840 that came pre-installed with Windows 8, which I've upgraded to Windows 8 Pro.
  I then updated to Windows Pro 8.1 by Windows store. Please notify:

  1. how to create a DVD repair or start for windows 8.1 pro with UEFI Bios and boot secured.

  2. I created a USB recovery using the control panel in Windows Pro 8.1. It starts OK. It will be the same as that I've created using the Toshiba Media recovery creator or will it drivers Windows Pro 8.1?

  3. check partitions with disk management, then 3 (450MO, 350 MB and GB 10.90) recovery partitions, 1 EFI system partition and 2 primary (C: programs) and D: for data. I created the recovery DVD and USB 2 disks. Can I remove the 3 recovery partitions?

  Your help will be very appreciated.

  Best regards

  Romero

  I found your previous thread on this topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=74272

  > 1. How to create a DVD repair or start for windows 8.1 pro with UEFI Bios and boot secured.
  To be able to boot from sources other than the drive HARD internal, the boot mode must be set to the CSM and secure boot must be disabled!

  > 2. I created a USB recovery using the control panel in Windows Pro 8.1. It starts OK. It will be the same as that I've created using the Toshiba Media recovery creator or will it drivers Windows Pro 8.1?

  Your laptop has been preloaded with Win 8. Right? For example, the USB flash stick memory you just use the Toshiba Recovery media creator contains the Image of Toshiba with Windows 8. Don t mix this Toshiba image with the image that can be created using Microsoft's own backup and restore function. Both are different pictures!

  > 3. Check it with disk management, then 3 (450MO, 350 MB and GB 10.90) recovery partitions, 1 EFI system partition and 2 partitions primary (C: programs) and D: for data. I created the recovery DVD and USB 2 disks. Can I remove the 3 recovery partitions?

  The last partition contains the files on HARD drive recovery. Usually this partition will be created again when you use the Toshiba Recovery disk to put the laptop back to factory settings. So in the case where you n t need this files or the partition, you can delete

• Satellite Pro P100 - support for 4 GB of RAM in Win7 64 and Intel Virtualization

  Hello to the members of the forum,

  I have the Satellite Pro P100 (PSPAHE - 002001GR) and I installed the WIN 7 Enterprise 64 free trial. I have Modules of memory 2 x 2 GB Corsair, a T7400 processor and Bios version 4.7. Everything works fine without their memory. Known BIOS all 4 GB, Windows see it uses but only 3 GB. I know im not alone with this problem, but I have not found a solution to solve it. In msconfig, all right, there's max, and the number of processors. RAM not activated.

  If someone knows a way to work to use all 4 GB of installed Ram?

  I would be much obliged if anyone can help.

  Something else. Intel VT - X is not enabled by BIOS. Also, there is no option to do this. When I bought the laptop it is a feature that I want to use, and now the BIOS does not support it. Why didn't pay much for the laptop so characteristic specific card do not work propably?

  Thanks to everyone for reading my post and want to help.

  SOFC

  Hello

  Perhaps than that you seem stupid now, but I think that this model laptop was never supported for 64-bit operating systems, and I think the BIOS is also not designed for this.
  If you wish, you can call Toshiba nearest service and ask for help. They have access to the database of Toshiba and they can check it for you.

• What hard drives are supported for Satellite 5100-201

  Hello!

  My drive is making some strange noises, might he have one foot in the grave...
  Have the latest bios 1.9. and the original at 30 GB disk.
  Have a Hitachi 40 GB I tried with, but the laptop did not.
  So I would like to know what drives and formats supported for this model.

  Thanks in advance!

  Hello

  Very strange did you use a compatible 40 GB HDD?
  To my knowledge, the laptop must be able to recognize the 40 GB HARD drive.
  As far as I know the 30 GB HARD drive that was installed is a Toshiba MK3017GAP and the computer supports a HDD of 20, 30, 40 or 60 GB.

  I think that these disc HARD must be compatible:
  Toshiba HDD2171B 40 GB HARD drive
  HITACHI G8BC00009110 40 GB HARD DRIVE
  Toshiba HDD2183B 60GB

  PS: The strange noise from the HARD drive could be the beginning of the end
  So make a backup of the data.

• Where to find a list of processors that are fully supported for my laptop?

  I need to find a list of processors that are fully supported for my laptop, my laptop is a HP PAVILLION DV7 3090EO, im trying to change my processor for a new and need to know what processor taking care of my laptop.

  Thank you

  Dalatoni

  Hi Dalatoni,

  Looking at the Page 84 of your Service and maintenance Guide, there are only 2 processors compatible with your laptops card motherboard/Bios.

  Kind regards

  DP - K

• Want to 700-019 H5P24AA #BL: what is the side power maxiumum supported for a video card in Envy 700

  I want to improve my HD 8570 delivered installed video card.

  What is the rated power more of a video card that would work with the installed 450W power supply.

  CPU is 4770 I7 motherboard: MS-7826 (Kaili)

  Thank you

  The 700 WANT referenced has a 460 watt POWER supply with a PCI-E 6-pin power supply.  In addition, this particular model PC has a version 8 for most graphics cards latest UEFI BIOS which are rated to work with a 460 Watt power supply would probably work.

  Of EVGA has a NVIDIA GTX 960 modelthat requires only a single PCI-E power connector 6-pin. Other models of the EVGA GTX 960 graphics cards require a PCI-E power connector, 8 pins.

• UEFI BIOS vs

  If Windows 8 replaced with UEFI BIOS, why my HPSA is eager to update "HP Notebook System BIOS" (which is constantly update fails?)

  I use the HPSA version 7.4.45.4

  ENVY of HP dv7 Notebook PC

  64-bit Windows 8

  My system shows info "BIOS Version/Date as: Insyde F.29.2013 - 10-03 ', which is more recent than what you have listed.

  So it's probably what came with my with my laptop when I bought it in may 2013!

  Thanks for your time.

• T400 size maximum drive supported by the BIOS.

  Anyone know what the maximum hard drive size supported by the BIOS for a T400?

  It does not exist. You can use any disk sata hard with 2.5 inch form factor and 9.5 mm thick.

• Pavilion g6-1050-st: no support for my product?

  Hello.

  I tried to configure my laptop so I can use the switchable graphics feature since I was 2 GPU. My Catalyst Control Center UI does not show this feature. I've tried 5 or 6 different guides to solve this problem, but no success. I came to the conclusion that I need to upgrade my GPU of HP website drivers, that I can't find.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G6-1000-Notebook-PC-series/5046257/model...

  No GPU driver? Why is this and where to find them?

  Next part of my question, I tried upgrading the BIOS with update the link, don't still no dynamic-fixed choice given. I tried to download the older AMD drivers, still no switchable graphics in CCC. What should I do to see this feature?

  Thank you.

  Edit: My (g6 1050st) product is not in this list, given in sticky thread:

  http://support.HP.com/tr-TR/document/c02948560

  So I did not date this driver BIOS, I updated one given in my product page. But I have used graphics switchable back in Windows 7. So what can be my problem?

  Hi there @Onat

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand you are trying to get switchable graphics with your current configuration. I'm happy to help you with this.

  Check the product page, it seems that Windows 8.1 is not among the operating systems supported for this laptop. There are a few pilots of Windows 8, but as you say it's not for graphics cards. As for the BIOS, when it comes to laptops and laptop computers, it is common to lock certain options available on desktop computers, because they can cause serious problems with heat and performance on a laptop. Dynamic mode is one of the people often locked and switchable graphics, fixed - function is controlled by the system, as is the video memory available.

  The lack of a custom driver, your best option may be to go back to Windows 7, use the one for her. What follows is the driver which includes two graphics processors for Windows 7.

  AMD HD graphics driver

  I hope this helps. If you have any other questions let me know.

• Update support for Realtek RTL8168/8111 Ethernet NIC (NDIS 6.0) network turns off. System needs to restore to repair.

  My system features:
  OS: Win 7
  Motherboard: Gigabyte GA-EP45T-UD3LR LGA 775 Intel P45 ATX
  Vid card: 9800GT BFG
  CPU: Intel Pentium E6300 Wolfdale 2.8 GHz
  Memory: Mushkin 4GB DDR3 1333 (PC3 10666)
  Sound: on-Board (SoundBlaster Audigy 4 installed but disabled)

  I went through the system updated with Windows 7 a bit recently, and when I installed the optional updates my network should be gone after reboot.  After several attempts to recover or even create a new Windows network is never no material at all for the network.  It can even detect my router or connect directly to the internet through my cable modem.  The only way for me new network access is back using System Restore.

  I have narrowed the question until the 60 KB update option for published Realtex network devices 11/15/2008.  I could not solve much more deep, because all processes automated are more or less useless without the support of the internet, and I did not understand how to turn off the training wheels of Windows and allow me to tinker with advanced settings again.

  Someone has encountered a similar problem and found a solution yet?  All of my updates seem to work except this one very well.  Any tips?

  Thank you.

  On a side note: I love the automation with this new version, but I'm an advanced Windows user and I would like to be able to tinker with and debug some things on my own.  Y at - it 'Advanced mode' setting for things like the Panel anywhere?  I could not find one.

  Hello

  I am pleased to have been of assistance. See the last two paragraphs here on how stop these old driver updates of
  loading, whilst on Windows updates.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it) and
  Then, get new ones manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• no support for dv6768se

  No update for the dv6000 BIOS

  Careful, HP has turned to deception. I bought thousands of dollars worth of HP products. I recommend the purchase of HP in my official duties as a Director of engineering. However, I was disappointed by the performance and support in all cases. I have two machines where I couldn't write media to recover. The most recent is with my Pavilion dv6000 laptop. It has the problem of restarting which may be related to problems of overheating GPU NVidia. This is known issue and HP must have decided to let go without worrying about the goodwill of its customers.

  The details for the latest incident are:

  Seeking support, I called a number found on the site of HP. I was charged for the support of a partner HP from a foreign land only to make things worse.

  They say that when I called HP they Mobile is unsupported and is obsolete. So, why is me she charged?

  My flag will not re-start. The symptoms started he did a software update from Microsoft. The update restarted my system and suspension system. After a stop forced (pressing the power button for 5 seconds), I had a soft recovery screen. I did a restore and it restarted. It hung again. This time, the indicated recovery screen I couldn't move forward and to contact support.

  I tried to get it back to the factory setting. This has seemed to work until I did the updates and tried to restart the machine. It hung again. I made the diagnosis of HW, but diagnostic tests indicated no problems. Analysis of disk of Vista also no problem.

  Before I looked for support I found that instead of restart, if I made a stop, I could limp thought enough of the upgrade to Windows 7. However, the question remained, and she seemed to be associated with HW. That's when I called HP support.

  First of all, I told them (ITechLine) was associated with HW and I didn't not need remotely diagnose my machine. They insisted so I spent a day watching a tech do the antivirus scans and scan disk. Later, they said they had solved the problem, but the technology that has been doing Diagnostics admitted that the original question seems HW and remains.

  How I got the number of ITechLine from the HP website. May have been my mistake, and a better number could be found on the HP website. The loss of time can be, I think, a concealment deliberate by HP.

  Later, I called enough people at HP (even in a foreign country) to find the HP had decided to abandon the support for my laptop and I couldn't support or portions of their share for this machine. The person said that the technology was obsolete. It is also darkening; Since a SATA drive for this my machine could be found for less than $50 and would have more than twice the capacity. In fact, I could buy a new memory 2 GB SODIMM, a new hard drive and a new battery for less than $90. Phone support charged $149.

  I have a few web searches to find the GPU NVidia overheating problem was probably the cause. Then, I disassembled the laptop to clean the cooling fan. The reboot problem was considerably reduced. I can restart 5 out of 6 times, which leads me to believe that it is the GPU overheating problem.

  However, now I can't use the optical drive to start the Windows 7 support. It does not show in my computer. Also, I can't write recovery media using the internal optical drive. I knew it is the bios, because one of the stages that I found on the web had to reset the cmos to the original. I see that is not the most recent. By going to the HP site for the update of the bios, I find that they no longer have the update and my machine does not get detected by their auto detect process. Forgot it that they did the laptop.

  So, I have a laptop of brilliant almost new look that will not work and is unsupported. It is obsolete, even if the State of the industry has not really progressed for laptops. It is Wi - Fi enabled with a large screen and could run all the latest SW until 5 days ago. It is too light to be a doorstop good, so it is useless. All I can get from HP is denial, disappointment and a dress (with a foreign accent).

  Being an EE, I thought that HP a tester has been great and that HP would be able and honorable. It's the end of an era.

  Someone know where I can get the free bios update? It's not worth spending a lot of money after bad to pay for a service update of the bios.

  It is a forum for users of peer-to-peer support for HP products. HP maintains no official presence in this forum. It is unlikely that HP will respond in an official capacity. Response of an employee of HP represents his own opinion and not that of HP.

  Here are the specifications of your HP Pavilion Entertainment Notebook computer dv6768se. Based on the information contained in the specification, this model is about 5 to 6 years. Years of the computer, this laptop is very certainly obsolete. You can find the update of BIOS, drivers and software for your computer on the HP support site at HP Pavilion dv6768se drivers and downloads. The most recent BIOS listed is;

  Description;
  This package provides an update the system BIOS. The update is installed on models of laptops using a supported Microsoft Windows Operating System. A reboot is required to complete the installation.

  Communicate the details;
  Exit the: 2011-03-30
  File name: sp52477.exe [1/1, 3.09 M]
  Version: F.34
  Compatibility: (MUST BE INSTALLED UNDER)
  Microsoft Windows Vista
  Microsoft Windows Vista (64-bit)

  Fix/enhancement;
  -Fixes a problem where the system stops unexpectedly in response and a warning window 0 x 124 appears when the laptop was turned off abnormally, then restarted.

  Please send Bravo