VCB is supported on Windows 2008 64-bit.

Similar Questions

• Is there another solution to integrate NAC Appliance and Active Directory on Windows 2008 64 bit

  I'm trying to integrate a device of the NAC solution in a network where all domian servers and application servers are Windows 2008 64-bit.

  Could someone help me to confirm if Active Directory (AD) on Windows 2008 is not taken in charge and tell me what alternatives exist to authenticate users who consider that it is not possible to make any changes on the server. They will continue to be Windows 2008 64 bit.

  The original idea was to use AD SSO to authenticate users, but I read that it is not supported on Windows 2008 64 bit.

  I'd appreciate any help or suggestions.

  Concerning

  Arturo Monroy

  Arturo,

  You can use LDAP. Configure an LDAP authentication provider and have your customers to provide their credentials.

  It will not however a single code access scenario. They would have to enter their credentials again on the NAC agent.

  Support for 64 - bit is on its way and will be out in the new versions soon.

  HTH,

  Faisal

• Re: Toshiba Store Alu 3.5 "1 TB HARD drive works only with Windows 2008 64-bit

  Just bought this as a backup device for Small Business Server 2008 running on Windows 2008 64-bit. However it does not? Are there drivers anywhere for this or it is simply not supported and I need to buy an alternative solution?

  Plugged into my laptop Windows 7 64 bit and no problems.

  Someone else had the same problem?

  Hello

  Unfortunately, there is no other software by download.
  I checked the driver page Toshiba in the Options area but didn't find anything

  AFAIK it of a plug & play HARD drive if you n t need any software to recognize the HARD drive

  There may be a password.
  Try this:
  Connect your HARD drive to the computer when the HARD drive is working
  Select the CD drive with your browser (password)
  Run the ONSPCLCK.exe
  Select 'Options '.
  Select "Disable security password"
  Enter your current password
  Unplug the HARD drive
  connect the HARD drive

  Now, it will work, but with no password protection. Perhaps it would work

• Siebel 8.1.1.11 on Windows 2008 32-bit

  Dear all,

  We intend to improve 8.1.1.5 8.1.1.11 and currently on Windows 2008 32-bit.

  Siebel 8.1.1.11 will work on Windows 2008 32-bit for HER, SWSE, etc.?

  The "Certifications" tab does not have Microsoft Windows 2008 32 bit as an operating system supported. This means that we cannot spend our 8.1.1.5 existing on Windows 2008 32-bit to 8.1.1.11 unless we move to Windows 2008 64-bit?

  But "Siebel Support for Windows 2008 () ". DOC ID 781428.1 "( )" indicates that Windows 2008 32-bit is supported for 8.1.1 or.

  Thank you

  Lino

  Hello Lino,

  Thank you for using Oracle communities.

  Regarding your query on 8.1.1.11 with Windows 2008 32 bit. You can always 8.1 patch1.11 atop 8.1.1.5 and application will work fine.

  Problem here is that Windows 2008 (32-bit) is end of life (EOL) of microsoft. So Siebel will always work for Siebel 8.1.1.10 and 8.1.1.11 (including Patchsets) Siebel and Oracle supported on a technical level, but we don't plan to list the versions of Windows on My Oracle Support certify once can no longer get support from Microsoft.

  Visitors can run Siebel 8.1.1.x on Windows 2008, 32-bit, but we dealt only with issues related to the Siebel code and can not help in Microsoft problems, since we are unable to get help.

  So since you are running on W2008 32-bit 8.1.1.x pre-8.1.1.11 version then you might well spend Siebel to 8.1.1.11 and stay on the subject.  (As it was in the old SRSP will who honor us)

  But of course, you will need to plan to move forward on W2008 R2 version.  This version is ONLY for 64-bit as matrices a with R1 W2008 32-bit line.

  Note: there is a hard stop on the end of this year with the Innovation Pack 2014 (aka Siebel 8.1.1.14): as we will be upgrading all the compilers and relying on Win 2008 R2, we can support 64 bit OS only at this time (because 32-bit OS will not exist for this and future patches). However, the Siebel application will be a 32-bit application.

  I hope it helps.

  Best regards

  Chetan

• Failed to open oracle functions after R12 installation on windows 2008 64 bit

  Hi guys
  I installed oracle R12.1.1 on windows server 2008 R2 64-bit, then the application opens but all forms of oracle functions cannot open, the message appear frm-92101, I try the solutions in the net, but no effect and I get another windows which and this message appears when trying to open an another oracle functions
  ""
  program currently running on this computer is attempting to display a message, then
  title of the message:
  E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\bin\java '-serv ".
  
  
  This problem come when a program is not completely compatible with windows
  ""
  This message when you start windows too, but the path of java inside files of oracle applications, please help me if oracle r12.1.1 compatible with win 2008 64 bit or not?

  I installed oracle R12.1.1 on windows server 2008 R2 64-bit, then the application opens but all forms of oracle functions cannot open, the message appear frm-92101, I try the solutions in the net, but no effect and I get another windows which and this message appears when trying to open an another oracle functions

  Direct installation of R12 on Windows 2008 64 bit is not supported. You install it on a Windows 32-bit operating system, and then migrate to Windows 64 - bit.

  Oracle E-Business Suite installation and upgrade version Notes 12 (12.1.1) for Microsoft Windows Server (32-bit) [ID 761567.1]
  Migration Oracle E-Business Suite R12 to Microsoft Windows Server 2008 R2 [ID 1188535.1]

  Thank you
  Hussein

• The tiara 10.2 is supported in Windows 7 (64-bit)

  The tiara 10.2 is supported in Windows 7 (64-bit)

  Have you tried a search?

  National Instruments for Microsoft Windows 7 product compatibility

• Google Talk is supported for Windows 7 (64 bit)?

  Is there a download of Google Talk with a computer running Windows 7 (64 bit)?  I would like to run google talk as a stand-alone application instead of having you connect to my gmail account to access the chat feature.

  Hello

  Yes, Google talk is supported on Windows 7 (64-bit).

  You can download and install from the following link:

  http://talk.Google.com

  Please let us know results.

• How to add support for Windows 7 64 bit id3v2.4

  ID3v2.4 support for windows 7 64 bit

  Hello

  I would like to ask if it is possible to add a support id3 - tag (version 2.4) to windows 7 Professional 64-bit.

  (and if so, how...)

  Thanks in advance

  Hello

  Explorer Windows and Windows Media Player can not handle ID3 version 2.4 tags in any version, until and including Windows 7/Windows Media Player 12. Windows can understand ID3 until and including version 2.3.

  For more details about tags ID3 in Windows 7refer for the links provided below:

  http://Windows.Microsoft.com/en-us/Windows7/media-information-in-Windows-Media-Player-frequently-asked-questions

  http://msdn.Microsoft.com/en-us/library/dd743220 (v = VS. 85) .aspx

  Thank you, and in what concerns:
  Naman R - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Memory of the virtual machine in Windows 2008 32-bit Aignesberger.Software.website.Watcher.2010.busines

  Dear all,

  I installed the virtual machine with Windows 2008 32 Bit Standard Edition. Compact, his oar was 2 GB at this time there, everything was fine, I increased the ram to 4 GB. Now my Easerver 6.3.1 got crashed and pursuant to the original agreement we also reinstalled/reconfigured EA server, but it is always showing 2048 MB of memory instead of 4 GB.

  
  

  2554-11-08 13:09:17.733 INFO wire-34 after USER ID = Adeelme:cms
  Type of Message 2554-11-08 13:09:17.733 INFO wire-34 = Debug
  Virtual memory use Java ScheduledTask:Dump60SecondMemoryUsage [CheckMemoryUsageTask] INFO-2554-11-08 13:10:00.046: 19% (94/264/494 MB)
  Virtual memory use 2554-11-08 13:10:00.046 process of ScheduledTask:Dump60SecondMemoryUsage [CheckMemoryUsageTask] INFO: 98% (2016/2047 MB)
  Virtual memory use Java ScheduledTask:Dump60SecondMemoryUsage [CheckMemoryUsageTask] 13:11:00.051 INFO-2554-11-08: 21% (104/264/494 MB)
  Virtual memory use 2554-11-08 13:11:00.051 process of ScheduledTask:Dump60SecondMemoryUsage [CheckMemoryUsageTask] INFO: 98% (2016/2047 MB)
  2554-11-08 13:11:15.000 INFO component/method name Thread-34 [JaguarServer] = n_app_controler/of_getapplication

  Type of Message 2554-11-08 13:11:18.631 INFO wire-34 = Debug
  Virtual memory use Java ScheduledTask:Dump60SecondMemoryUsage [CheckMemoryUsageTask] INFO-2554-11-08 13:12:00.052: 14% (74/264/494 MB)
  Virtual memory use 2554-11-08 13:12:00.052 process of ScheduledTask:Dump60SecondMemoryUsage [CheckMemoryUsageTask] INFO: 98% (2016/2047 MB)
  

  Thank you

  Adeel Imtiaz

  Yes - you can
  but that will make your VM very slow

  set
  prefvmx.minVmMemPct = "50".

  or less - allowing you to approve the RAM
  Set this parameter in your config.ini file

• Virtualizar Server Windows 2008 64-bit

  Hola a todos los del grupo readers.

  Esoy sober trabajando a server Dell PoweEdge R410 con 24 G of RAM there back microprocesadores Intel Xeon E5507 of 2.27 GHZ.

  Intento instalar una Máquina virtual windows 2008 64-bit sober vmware esxi 4.1.0.

  He configurado the Máquina virtual por defecto en lista of configs Cavalry ESXi (windows 2008 64 bit) al arrancar led the Máquina virtual recibo una ventana advertencia acuerdo al archivo as editor mas abajo.

  He read some items al respecto, e intentado reconfigurar el Bios of the machine in virtual los datos that case en the advertencia, pero no encuntro estas options.

  Not if are yo no black find los datos a configurar Bios, o los microprosesadores este Server realmente en el no compatible son para virtualizar una Máquina 64-bit.

  Desde is muchas gracias

  Bernardo

  Hola bskatz,

  Checks en you HOST PHYSICAL than you have enable Intel-VT o AMD - V

  A greeting.

  -

• Can't seem to find the native oracle 32-bit cleint for a Windows 2008 64 bit op

  Hello
  
  We have a Windows 2008 (64-bit) server and that you have installed oracle 64-bit client out there.
  
  Have a third-party application which is usggesting also need a client native 32-bit oracle.
  
  Peeked on otn but can't seem to find. For 64-bit operating systems can't see oracle 64-bit client.
  
  Ideas/links appreciated.
  
  Thank you

  user5716448 wrote:
  that is, no client 32-bit for the client operating system 32 bit and 32-bit operation for 64-bit operating system?

  There is no client 32-bit for the 64 bit OS, use standard 32-bit client on 64-bit operating system.

• Where is the path to copy SYSPREP from Windows 2003 to Windows 2008 64-bit files?

  Im running Windows 2008 64 BIT for my vCenter server, but can't find the patch where should I copy the files?

  Can someone list the path?

  see this KB

  http://KB.VMware.com/kb/1005593

• Break the BI publisher on Windows 2008 64-bit installation

  Hello, everyone
  
  I need sense of simple installation on BI Publisher version 11.1.1.3 on Windows 2008 64 bit server to Oracle database 11g and Apex 4.0. The more I read the installation, I'm confused. Document ID: E10539-01 is very confusing to me. I'm sorry. The 32-bit with BI Publisher version 10.1.3.4.1 server is much easier to implement.
  
  Thanks in advance.
  
  Tigerwapa

  BI Publisher implementation is another story, but I think that the instructions for setting the version 4.0 of the APEX is identical to the version 3.x... You point apex on the port that you have installed BI Publisher on and the servlet that transmits information between APEX & BI Publisher...

  Thank you

  Tony Miller
  Webster, TX

  When you have enough clowns, you have a circus.

  If you answer this question, please mark the thread as closed and give points where won...

• Pachting Oracle 11.1 under Windows 2008 32 bit

  Hello community, Oracle,.
  
  I installed a publishing standard oracle 11.1.0.7.0 under windows 2008 32 bit. When you create a database, I get an ORA-12560 error. I had this problem before, and the solution was, pachting the first instance, and then install the database with the dbca Wizard. Now my question is what is the best practice to patch the database to keep up-to-date. When you use advanced search in metalink didn't group patches, but 97 fixes some older then 1 year. I'm a bit confused and do not know which patch I have to install.
  
  Krischer

  You will find the link in the note mentioned under 32-bit patches.

  Werner

• Configuration of Backup Exec 12.5 and VCB with Windows 2008 64 bit

  Hello everyone

  Try to install the update of VMware Consolidated Backup 1.5 1 with Backup Exec 12.5 on a Windows 2008

  64-bit server.  Having a hard time getting the configuration to work.  When I try to do a restore via vCenter

  I don't get "VMware Converter not found"

  I installed Converter Stand Alone on the server, but I still get the same error.

  Some would please the VCB and Backup Exec 12.5 on a Windows 2008 Setup process

  64-bit server?

  Thanks in advance...

  Gerald S.

  Looks like you need to install vCentre Converter (the server vCentre himself) of what has been said.

  Please give points for any helpful answer.