Support of SD W500 32 G SD reader

Similar Questions

• Update of Lightroom 5.7 mentions "Support with the ability to add or read comments provided on Lightroom web" I can't find anything that explains what 'Lightroom Web '.

  Update of Lightroom 5.7 mentions "Support with the ability to add or read comments provided on Lightroom web" I can't find anything that explains what 'Lightroom Web '. Just curious.

  This article will give you an introduction to Lightroom mobile in 5.7:

  Adobe Lightroom Mobile "Julieanne Kost's Blog

• My Satellite A100 does not support SDHC cards with the internal card reader

  Hello

  My Satellite A100 can't stand my sandisk 4 GB SDHC.
  'normal' SD cards are not a problem with the internal card reader, and there is no problem with the 4 GB sandisk SDHC card using an external card reader.

  is there a software solution?

  regrads,
  Itock

  I don't have the time to read the manuals for your model of laptop users, but can be registered to all supported cards. I guess SDHC not registered and not supported.

  I don't know what you mean with the software solution, but as far as I know, update for multimedia card reader is not available.

• [Support request] Why my X 61 Core2DuoT9300 read clock speed 1.2 Ghz max since the @2 capasity. 5 Ghz

  Dear lenovo community

  I really need help for my problem here as I already looking for information a lot on the net but can't find the answer:

  I have Thinkpad X 61 with spec like this after benchmark with AIDA64/Everest:

  Intel Core2duo T9300 (Peryn) @2. 50 Ghz

  Processor clock: 1200 Mhz (original 2500 Mhz)

  CPU multiplier: x 6

  CPU FSB: 199 Mhz (200 Mhz original)

  Memory bus: 332,5 mhz

  L2 cache memory: 6 MB

  Motherboard: lenovo Thinkpad X 61

  HD: 250 GB Hitachi SATA 5400 RPM, 8 MB buffer

  BIOS: BIOS Type Phoenix (18/04/08)

  This laptop using Vista as OS.

  Previously, I wonder why this laptop performance is quite similar with my old intel-P3 500 mhz, very slow

  so after the reference with the software I know that my laptop is running half than the peak performance: @1. 2 Ghz compare with the capasity of maks @2. 5 Ghz, so I already knew what the causes of this slowdown.

  I had another computer toshiba T5500, each cpu core read with maximum @1. 5 Ghz, so I think that there is something big Miss here because my X 61 compare to old toshiba could say 2 times slower

  So I hope no friends could help guide me how to set the clock in the original speed, as should be

  I try to log in the bios but sees no possibility to change the speed

  Thank you somuch

  Rgds

  GON

  Thank you all, I found the solution for this problem to

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-71222#DOCTOP

  http://Forum.ThinkPads.com/viewtopic.php?f=30&t=92302&view=previous

  conclusion:

  The clock speed will be less than the normal speed if I plug out the batery and use 65w adapter

  When I use my adapter (65w) as well as the battery the clock cpu core back to normal (2.5 Ghz), an alternative if we want to use the adapter without battery taken in. we need to change the adapter 90w series

  Detective Conan now

  TQ

• Support download of Japanese language for Adobe Reader DC

  Have a new computer that came with Acrobat Reader already installed DC.  I am trying to open a document in Japanese language and he tells me that I need to update the Japanese language support package.  When I try to do, I can't find a package to DC and I said I need to download the old version Adobe X.  When I try to download Adobe X, it tells me that I already have a newer version of Adobe (i.e. DC).  Question: Is there a Japanese language for Adobe Reader DC support download and where can I find it?  Thank you.

  Nevermind, I found it. For Windows, go to Adobe - Adobe Reader: for Windows: Adobe Acrobat Reader DC Font Pack (continuous)

• 5.0 Android has supported audio OPUS, but I can't read files OPUS music/Walkman

  Hello

  After that in the blind tests Opus easily surpasses AAFC (same size), and MP3 (in the larger size of 25%) and constantly is considered the best audio codec, I wanted to use it on my phone. Apparently Android 5.0 supports OPUS and even has the function on its promotional changelog.

  But it seems that I can't play all the game files on music (formerly Walkman), not even the length of the track is displayed. The file work on VLC (at the same time, Android version and desktop version) without any problem.

  Can provide some test files, but no matter what file encoded with opustools (official decoder) will not work.

  I really hope that you can fix/add it to the application music.

  Best reagards

  Thank you for your comments. I will pass this internally.

• How can I play audio books and music to the same list of reading, in the same app on my iPhone?

  I don't really know where posting this because it applies to music and audiobooks and iTunes, but this corner of the support community seems most likely to be read by people with similar problems.

  I've got playlists in iTunes that are a mixture of Media type = Audiobook and Media type = music. In iTunes, they are in the same playlist, and I want to stay in the same playlist - they are language courses. But on my iPhone, digital audio books disappear from music and appear in iBooks (and in a book audio browser, the app I use audio books). It's the same playlist is now not only in two different playlists, but in totally different applications.

  Is there a way to play these files from the same application on my iPhone, rather than having spread them over two applications? I guess the most likely option is an application that includes all the audio files on the iPhone, not only music and audio books not only. Such an application exist?

  (Yes, I could theoretically change all in the music, or any audio book, but many of them have four-digit numbers, and if I change those files the track numbers will disappear and the playlists will be totally screwed.)

  Thanks in advance.

  Want very it is a third party application that can play audio books and music - particularly iTunes purchases items. You can certainly check the app store.

  But yes, the unit and the apps work as expected.

• Satellite C50T-A382 - updated to Win 8.1 Pro & touchscreen support

  Dear all

  I am currently the owner of Toshiba Satellite C50T-A382 machine which has preinstalled Windows 8.1 edition in plain language.

  I now want to upgrade to Windows 8.1 Pro Edition, however I'm worried if updated to Win 8.1 Pro, it will support not my touch screen, because I read many comments on the Internet about other brands, like H.P., happens, etc. where users have upgraded to Windows Pro Win SL 8.1 8.1 and their support of the touchscreen is so more than work.

  Very would be grateful if someone could inform if it would still technically support my support for touch screen or not?

  Thank you.

  Concerning
  Tan

  I put t see serious reasons why the touch screen is not working after these updates.
  The driver that controls the touchscreen part of Windows 8.1 System. It s not supplied by the factory for laptop (Toshiba, etc.), but it of a Microsoft driver.

  However, in most laptop cases factory provides own systems preconfigured and tested, including all drivers and additional software. All other systems, own hand are not supported by device manufacturers.

  What does that mean?
  This means that in the case of certain problems (after the installation of another system) you will be always asked to test the device original system preinstalled and preconfigured.

• CD/DVD drive does not read smart TV card software CD

  Recently I buy a smart TV card and I can't seem to load the disc that came with the tv card. Can someone please help?

  Hello

  Have you checked if the drive supports and that it is able to read other CD?

  I hope that the drive is not too bad?  :|

• Lenovo x 240 battery observations and investigations [trendy not supported]

  Hi, have a few observations and questions about the 240 x battery. 1 have not really noticed before, but when you plug the charger, the news of support for internal and external battery should read "connected, charge '? 2. I noticed that the mine only has 1 (internal or external) that reads "plugged in, charging" while the other is not (plugged in, do not load)-I first thought once we're in charge, another would activate and fresh, but it's apparently is not. 3 have not really found the problem, i.e. the hardware or software. Sometimes it's the internal battery that costs, sometimes it is the other - I have two defective batteries? Is this a software problem? Here are the things I have tried/tested 1. I uninstalled the device drivers in the same device, rebooted - Manager. 2. install / re-installed the driver of lenovo power manager - nada. 3 tried to recharge the laptop while it is off - voltage and both got fully charged! Someone has the same problem? appreciate the advise / help and thanks in advance.

  Hello

  Thanks for the reply and my apologies for the late reply.

  Took the time to observe the laptop, but I guess I found my answer.

  It seems that the laptop is not simultaneous battery internal and external. Noticed it imposes outside first, then residents. Looks like that's how it really works. Fortunately for me not to send my laptop warranty or buy a spare battery.

  Thanks again and happy to be part of the community of Lenovo.

  See you soon and good new year!

• Satellite A30-404: DVD player does not read some DVD

  Hello

  I have a satellite A30-404, and recently, I installed a new firmware update for my TOSHIBA DVD - ROM SD-R6112. (page can be found [here | http://nl.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=NL&selCategory = 2 & selFamily = 2 & selSeries = 153 & selProduct = 518 & langua ge = 33 & selOS = 10 & selType = all & yearupload = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = 28 & selectedLanguage = 33 & type = all & page = 1 & ID = 46804 & DISO =-1 & driverLanguage = 42])

  Since then, I can't play some DVD I write, for the most part, the 4 GB DVD +, for example, I can perfectly read a 1, 3 GB DVD with 3 multisessions.

  However, other computers can read the DVD I can't.

  Help would be appreciated.

  Maybe the new firmware does contain all of the information on the DVD.
  Do you know what firmware is or what information it contains?

  The firmware of the drive contains simple information about the support that can be used, what burning/reading speed is supported, which average manufacturer is compatible, etc.

  Maybe the new firmware contains other information such as and therefore CD/DVD cannot be played correctly.
  I think in this case, you need to test different CDs/DVDs and try to burn at a different rate.

  PS:
  http://support.toshiba-tro.de/KB0/TSB56012R0004R01.htm

• X 60 fingerprints fingerprint reader driver

  Hello gurus,

  I installed Win7 RC on my X 60 and all is well.

  My colleague mentioned that Win7 has native support for the use of a fingerprint reader, and I would try it rather than using the Lenovo Client Security Solution.

  I have a clean Device Manager now except for the "biometric" coprocessor, which I suppose is the fingerprint reader.

  No idea how I can get the driver for it?

  Thank you

  -Michael

  You can get the driver here: http://www.upek.com/support/downloads/windows7/learnmorew7.asp

• HP Pavillion NB231UA #ABA: Pavillion NB231UA #ABA Windows 10 missing card reader drivers

  Hello guys I have a laptop NB231UA #ABA. I have recently upgraded to windows 10 and now my card reader does not work and I can't find a driver for this work. Can someone tell me please in the right direction to solve this problem? I would really like my card reader works on Windows 10! Thank you!!

  Hello:

  See if the driver windows 7 works for you...

  This package contains the driver for the JMB38X Host Controller Card Reader in laptop models supported and operating systems. JMB38X card reader supports the following types of media: SD, MS, MMC and xD.

  File name: sp45180.exe

• Will the concept AD LDAP Referral supports two different forests

  Hello

  I have areas DomainA under ForestA and DomainB in ForestB. I would like to implement the concept of LDAP Referral for these two areas, so I have set up between these two areas and add a crossRef under CN = Partitions for DomainA and trying to search for DomainB users using ldp.exe DomainA.

  But it seems to not work.

  LDAP Referral Concept is supported in my case?

  I read somewhere that ads supports LDAP Referral for domains that are in the same forest, is this true?

  Can someone help me with this? Please let me know if I am missing any configuration.

  Thank you

  Phani

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• HP Pavilion DV6-6B13SS supports SATA 3 connection?

  Hello. I want to change my real disk (SATA 2) for one SSD (SATA 3), but I don't know if my laptop (Pavilion DV6-6b13ss) fully supports SATA 3 connections.

  I read the manual and it speaks only of the SATA 2 (3 Gbps) connections, but I think he is referring to the factory hard drive, because the chipset (Mobile Intel® HM65 Express) will support the SATA 3 connections.

  I did a few test and it says I have a maximun of 6 Gbps bandwich, so I think that the connection supports SATA 3, but I'm not sure.

  Thanks for any help or comments.

  Hello

  I can see the image now (approved). Yes, very safe to use SATA III SSD/HDD.

  All the best.