Supported - new to BB devices

Similar Questions

• Attempt to add a "new target or device', but the sbRIO 9607 is not listed

  Hello

  Just upgraded to 2015 LabVIEW and CompactRIO 15.0.

  Also used the Service to update OR install the patches for 2015 of LabVIEW and CompactRIO device drivers.

  I'm trying to add a target in LabVIEW in the window "add targets and devices." I select 'new target or device' and develop the sbRIO options. I see a lot of targets, but unfortunately the sbRIO-9607 does not appear. It simply isn't.

  

  Thoughts? When I'm back in the office on Monday, I'll try a repair of the driver.

  Best,

  Dan

  Well, this is embarrassing, but I don't know I'm not the first and won't be the last to commit this error.

  I had accidentally opened LabVIEW 2014 SP1 instead of 2015 of LabVIEW.

  Of course, it works in 2015 from LabVIEW. Congratulations if you guessed this might be the problem.

• NI-VISA 5.3 driver Wizard does not support USB 3.0 devices

  Hi all

  It seems that NI-VISA 5.3 does not support USB 3.0 devices. When I try to use the driver Wizard to create a driver for a USB 3.0 device, I get the error "ERROR-1073807178: device descriptor error - value not valid bMaxPacketSize0 (must be set to 8, 16, 32, or 64 bytes). I noticed that the unit has been giving wMaxPacketSize0 of 512 (2 ^ 9). But the driver Wizard treats the value 9. So I think that Assistant driver does not support USB 3.0 devices. If someone could confirm this?

  Thank you very much in advance!

  Jackie

  Hello Jackie,.

  Unfortunately, USB 3.0 is not officially supported in VISA 5.3 when you use VISA Driver Wizard.

  A non-official solution is to work around the "information in the descriptor' by selecting 'Other' in the list of devices. You will need to manually enter the 'USB manufacturer ID (vendor ID)' and 'type USB (Product ID) Code. You will then need to find your driver in Windows Device Manager, right click and select "update driver software". This, however, is not a workaround solution guaranteed as NI-VISA 5.3 is not officially compatible USB 3.0.

• found new hardware MTP device keeps poping up

  in the status bar icon keeps popping up saying found new hardware MTP device.

  nothing is connected, and when I go to add new hardware, it says something is currently installing a custom let me go any further.

  When I click the x or right click on it, it goes for a few seconds and then just comes back.

  How do I get this go away permanently?

  Hello

  · Have you already connected any device Media Transfer Protocol (MTP)?

  Media Transfer Protocol devices are devices such as the digital camera or digital audio players.

  a. click on start

  b. click Run, in the Run dialog box type devmgmt.msc

  c. click view under view hidden devices

  d. expand all winks in Device Manager

  e. There will be multiple entries in the device in gray Manager uninstall all entries shaded under all the winks and then restart the computer restart the computer.

• Apple Mobile Device Support new download problems with update iTunes on XP

  iTunes tells me to uninstall both iTunes and Apple Mobile Device Support (AMDS) then reinstall iTunes and amendments comes with installation... Problem is that it is not download the new AMDS with the new iTunes, and I have a Windows XP

  * original title - I bought an iPod touch connected and installed the new iTunes and: you need the latest version of the Apple Mobile Device support *.

  This is the old version of AMDS: http://apple-mobile-device-support.software.informer.com/.  The thing is, you're using the latest version of iTunes this version can not install because iTunes includes a verson later program when it installs (and so installing this one can either do not work or may cause problems).  If you have the latest version of iTunes installed, you should already have the latest version of AMDS.  Do you mean that it is not compatible with XP?  You could try to downgrade to an earlier version of iTunes that does not include the amendments and use the link above to add and see if it works - but your iPod may require the latest version and does not work with earlier versions of if or not you want to try this (I wouldn't bother) is up to you.

  Try to run in compatibility http://www.howtogeek.com/howto/windows-vista/using-windows-vista-compatibility-mode/ Mode and see if that helps.

  If not, please repost your question in the forums XP: http://social.answers.microsoft.com/Forums/en-US/category/windowsxp where the XP experts will be happy to help you.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• New x120e - "Unknown device" under USB controllers

  OK, so I'll try again from Firefox this time.

  For the first time poster, so please, be gentle. I recently ordered and received a x120e. The first time startup in Windows, the ThinkVantage Toolbox had a yellow exclamation point. To study more, I determined that it was due to an "unknown device" listed in the Windows Device Manager under USB controllers.

  I installed all the Windows updates available, and unknown device problem. When you open the device in Device Manager, the Statute indicates that "Windows has stopped this device because it has reported problems. (Code 43) ». The associated driver is usbfilter.sys, and if I try to update, it tells me that my current driver file is already up-to-date.

  If anyone can help with this question? I'd appreciate it - nothing worse than making a brand new machine with a hardware problem!

  Thank you

  NBread

  Or it might be the webcam, if you install only: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-76292

• Impossible to debug - conflicts at the level of the API - a newer than IDE device - bad joke?

  Hello

  I am new to this forum and Blackberry, but I develop applications for iOS and Android.

  Unfortunately I'm not able to debug anything, it seems that the IDE is obsolete - or abandoned or...?

  Message from that connection is:
  The API level 10.3.1--> Runtime Version 10.3.2 project

  "Cannot find the corresponding debug symbols", after clicking on "install...". "nothing happens.

  Enter in the update box (API level) and pressing get more, no new items were found.

  So, how can it be, that there are versions, which are not covered by the IDE development? On other manufacturers, it's the other way around, you will be able to test in advance, and here I have to wait until I could test the devices already sold?

  That must have been a bad joke, but maybe I'm not smart enough to find the right button.

  Or did I used the wrong environment and development via Momentics is no longer supported or interrupted?

  If someone managed to use the IDE and be able to debug on 10.3.2 Please give me a hint.

  Thank you.

  Momentics Version: 2.1.2 Build id: 201503050937

  Bond Blackberry device,

  OS 10.3.2.2474

  Take a look at the article below, which has a work around for debugging with 10.3.2.

  Workaround for the error: cannot find in debugging symbols

• Satellite L500 Support, new hard drive

  Hey,.

  So basically a few weeks a power surge overloaded my hard drive,

  Unfortunately I lost my receipt so I could not ask for warranty and has to go to a repair shop.

  If the repairs were fine, no drama.

  But basically, rather before where I'm sure I had vista installed, they have installed Windows 7,

  But the problem is that I've lost just some of the features, like built-in webcam Center, so I can't use my webcam and my habit of usb ports seem to work. As I plugged in a usb mouse and I don't even recognize it, it is not even appear in the Device Manager.

  Is there something I can do? I don't know if restoring the factory settings will work, because I have a completely new hard drive.

  Hi mate

  The webcam software can be downloaded from the page of European driver of Toshiba.
  If install you this software, then you will get back the features of webcam.
  In addition, the webcam software does not depend on the model of laptop. I could install the Win 7 webcam software out for L500 on my Satellite A210.
  So please check it should work.

  Generally, the USB port should be recognized automatically without having to install additional drivers. The driver is part of the Windows 7 operating system.

  But you should also try to install the Intel chipset utility.
  It should allow for the USB ports also works.

• Add new targt - no device not found

  Began development on a RIo SB 9605. Problems to set up the project. Add new target product 'no devices found '.

  Problem solved. I installed LV2014 (which is actually LV2013 Feb - that is not confusing). If a new target became visiable - SB RIO embedded. I can now create the project with the sbRIO9605 target file, generate a FPGA file and run it. So I'm good.

• EtherCAT: "found a module not supported on the slave device"?

  Hello

  I have a CompactRIO system that uses of slave hunts EtherCAT (cRIO-9081 + cRIO-9144) when I tried to deploy my settings, I got this message:

  Found a module not supported on the device slave address 0: 32445 slot

  What does that mean? (I have several slaves Garland, but of course, I don't have that many slot machines!) The chassis that has been reported with a red exclamation point contains these modules:

  • NI9201
  
  
  • NI9203
  
  
  • NI9265
  
  
  • NI9421
  
  
  • NI9481

  Is one of them unsupported on EtherCAT? If so, is there a list of modules taken into charge/no supported somewhere?

  Thank you!

  Hey there,

  I think you'd find this knowledge base, http://digital.ni.com/public.nsf/allkb/CA3A1D2166A4591386257514007A0F9C?OpenDocument , useful. It would be better to check what version of DAQmx you use and check the readme associated for compatibility or verify this DeveloperZone, http://www.ni.com/white-paper/10462/en. I hope this helps.

• How will I know if a current video card supports new HP 2511 x LED monitor?

  I have HP Pavilion a750y (PJ621AV) CTO Desktop PC, Pentium (r) 4 CPU 3.20 Ghz,.99 GB of RAM, Microsoft Windows XP, Service Pack 3. Always have the same square screen, it came with December 2004: HPvf15 flat screen monitor with "Intel (r) 82915 G/910GL express chipset family. '  I took "VGA".   I replaced the power supply twice and think I have more than enough power, space in the box connections and power, but I'm not sure about my ability to go tinkering with the layout new video accelerator card, or whatever the right terminology is.  I have looked at the information under "device" system but do not know enough to make sense what I read to go to the store and buy a new monitor with confidence.  I would get a new larger screen (the HP2511x LED seems to have good reviews and has a VGA plug), but I don't want to get it and then find out that Word documents are too blurry to read with Accelerator/current video card, regardless of the term is.  About 70% of the time, we use the computer for the production of documents and 30% for Internet display for the occasion of the shows or movies.

  Hello

  The following may not be what you want to hear, but that's my honest and frank opinion.

  With a 2004 PC that is generations behind current models, you really should hreconsider invest in a card video, power supply, and LCD screen. The video card, power supplies and LCD are likely to cost much more than the current value of your PC.

  Upgrade to a monitor 25 inches capable of 1080 p (HD) for your PC can collect not you the best return on investment. You may find yourself better to consider upgrading to a newer PC.

  Best regards

  ERICO

• popup "Found New Hardware MTP Device"

  I have a pop-up "Found new hardware device MTP" constantly to come. I can't get rid of even try go to control panel > Menu start & task bar but can't find it. Can anyone help?

  You have an MP3 of some sort?

  Maybe you've seen this?
  http://forums.CNET.com/7723-7595_102-229230.html

  My advice - however - is to get the latest software and drivers for whatever the device originally this message pop up.  Like I implied--probably an MP3 player.

• I would like to set up my new sat nav device drive on windows XP Home Edition Service Pack 3 (Build 2600) 5.1. What program I need to host his files?

  The device is a NAVIGON 70 Premium Plus.  When I tried to install it on my computer, the files are automatically placed in a very old version of Adobe, which was be languishing on my computer (Adobe Photoshop album Starter Edition 3.0) which is no longer supported.  I wonder if there is a compatible Windows program that exists which will host the sat. NAV files.  If it does not exist, then I would advice on this programmed I should have.  I'm not very savvy computer if you need help in English.

  Hi marie200642,

  I suggest you try to restore the device and check if it helps. Support team for the restoration of the device, I suggest you contact the NAVIGON.

  NAVIGON questions and answers

  NAVIGON customer support
  

• Do not install new computer USB devices.

  My computer is not install drivers for the new USB devices.  It reads very well the 'old', but doesn't recognize not new.  I try to use a portable hard drive, Verbatim 500 GB and a 4 GB flash drive Imation.  I use two devices in my netbook computer but not my office.  It says it can not find or install the drivers.  Ideas please, it's driving me crazy.

  Hi Marilyn_29,

  1. did you of recent changes to the computer?

  Method 1:

  You can try to start the fixit USB and check if it helps:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 1:

  Uninstall all USB device manager entries

  a. Click Start and typedevmgmt.msc and then press ENTER.

  (b) in Device Manager, expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  f. check the USB device to see if it works

  Hope this information is useful.

• synchronized (Application.getEventLock ()) gel my app on the new BB 6 devices (for example 9800)

  Hello guys.  Please see my code:

   public void run_my_thread()
   {
  
      myThread = new Thread(new Runnable()
       {
         public void run()
         {
             try {
                  synchronized (Application.getEventLock()) {
  
                      browserContent.finishLoading();
  
                  }
              } catch (RenderingException e) {
                  // TODO Auto-generated catch block
              //  Dialog.alert("blyat "+e.getMessage());
              }
              catch (Exception es)
              {
              //  Dialog.alert(""+es.getMessage());
  
              }
              return;
         }
  
       });
  
       myThread.start(); 
  
   }
  

  Can someone help me solve this problem? If I have it running on emulators/devices<6 (="" 9800)="" than="" all="" good.="" i="" don't="" have="" error="" or="" something="" .="" but="" when="" i="" running="" on="" emulator=""  blackberry="" 6.0.0.141=""  9800="" than="" my="" app="" are="" freezing="" .="" i="" know="" -="" it's="" realy="" problem="">

   synchronized (Application.getEventLock())
  

  but I do not know how to resolve this (())

  also, I found a similar problem http://supportforums.blackberry.com/t5/Java-Development/browserContent-finishLoading-hangs-on-OS-ver...

  but he has not found a solution for my problem. Need help browserContent - browserFIeld no because.<-- this="" work="" only="" for="" v6="" but="" how="" about=""><6  so="" if="" any="" one="" know="" how="" to="" fix="" please="" tell="">

  Please help me.

  Best regards, Peter.

  PS hope you understand me, sorry for my bad English

  the javadoc says:
  This method should not be called on a UI event Dispatch Thread.

  and if you synchronize on the eventlock you do exactly that.

  where is the code where you add the field to your form?