LaserJet P2055DN: Hp Laserjet P2055dn (CE459A) - stains on a vertical edge of paper

Similar Questions

• HP Laserjet 500 colorMFP M570d: printer HP Laserjet 500 colorMFP M570dn reflecting the situation of "on paper", but the paper is present.

  HP Laserjet 500 colorMFP M570dn reflecting the situation of "on paper", but the paper is present. Effects of several operating system platforms; 10, 7, 8.1, 2012 R2 server.

  We have this printer is installed on a server for printing on 2012 R2 server configuration. Everything works fine until today. The status on the side of things, regardless of the OS, OS shows the printer status is "on paper". Paper has been confirmed in the printer, cleaned rollers, test pages, copy made, etc. When you submit a print job, the State remains the same, just, the job is in the queue and does nothing.

  Any help would be appreciated.

  CRI_IT_guy

  When the software indicates out of paper, it's really tell you he lost communication with the printer. It could be a server problem.  To test since you already know that the printer works would print a printer configuration page and using the printer ip address set up on top of one of the computers as a local tcp/ip printer without going through the server, so the computer prints directly to the printer.  If it works, then your issue is network or linked servers.  Make sure that the address of the printer has not changed and also make sure that the spooler is running on the server.

• HP LaserJet P4515 - error 13.05.00 out of Fuser, paper thin, Jam.

  HP LaserJet P4515 - error 13.05.00 out of Fuser, paper thin, Jam.

  I have frequent errors of this type during work duplex paper jam. Simplex jobs seem to work unless I'm trying to duplex manually by printing on one side then the other well.

  When the jams, I will have a page hit the sensors after the roll before the transfer, usually empty the page following any given bin and my page duplex, which crossed once and came back to the backpage, folded under or on top of itself after its passage of the transfer roller, but before it hits the Fuser rollers.

  Sometimes it wil happen all other double-sided pages, or it can leave 5-10 before doing it again.

  Fuser has been replaced twice, because I thought maybe the first fusion unit was defective.

  I ran the component tests, tests of sensor and they seem normal.

  I need to know where I should look next.

  Currently, I plan to change all of the food guide, since this is where the interference takes place.

  The food guide was the culprit.

  The main roller connected to the gear was broken, which allowed to get out of the lowest speed.

• HP Laserjet P2055dn (CE459A): Hp Laserjet P2055dn (CE459A) - light scratches vertical and toner outside the boundaries of certain letters

  In my last post, I had problems with spots on one side of the page

  and that has been resolved by a new toner but unfortunately the new toner

  does not the good quality prints.

  Could someone please comment on what the problem might be / can it be fixed?

  Printer paper - general copy, laser, fax, jet of ink 80 g/m2

  The printer settings:

  Plain paper

  1-3 impressions Fastres1200

  4th Econo-600

  Please note: the quality of the scanned prints is not perfect - gray due to

  scanning has not been deleted. 4th print is shown with reverse for lighting

  better show streaks.

  The 1st and 2nd impression show how for some reason any double sided (two prints

  pages that are exactly the same) the second page has streaks longer than the first.

  pages 3 and 4 are with different resolutions and with/without econo mode.

  You can see the display of traces of toner in the vertical direction and toner is not

  forced to the sketch of a few letters for example some of the capital I have rounded ends

  and there are streaks in places.

  

  

  

  

  OK, I'm old enough to own up - (small but terrible end, I made a terrible blunder

  In my haste to try the new toner, I neglected to see the little black book under the

  the imaging drum cover (although he clearly says in the box to remove the)

  paper and paper). I removed the paper blew out the small amount of debris

  due to my "lack of patience" and did a print - and a cleaning page all printed letters

  OK - I'm relieved - everything is back to normal.

  Sorry for the false alarm and I thank you for your support! -I'll try not to not

  similar to the future blunders

• Color LaserJet 4600: Clear Magenta Toner streaks vertical

  Hi have a Color LaserJet 4600 printer that produces very fine vertical streaks of light on the magenta.  What is a toner problem?  Is there a warranty on the cartridge?  Thanks for any help!

  Most likely the toner cartridge is bad, isn't it a color.  HP Toner come with a warranty, howerver, they must be returned to the seller with whom you bought for replacement.

• HP laserjet 600 M602 tray 2 doesn't recognize a paper A4.

  Stage two does not recognize A4 paper. I tried to adjust the tray itself and it is defined correctly for A4 format. I tried to adjust the status bar for different size documents, but there is no change.

  The tray by default one size of paper custom 170 X 282 mm, which is the most important, that it will allow me to set the custom size. Other sizes it recognizes ate A5 A6 B6 and postcard but not A4.

  Tray 1, the manual feed tray prints ok but I need bac to be the default bin.

  Does anyone have a solution to this problem?

  Thank you

  Hi swatson888,

  It is a product of the profit margin. For the best answer to your questions, you need to transfer your question at the following links.

  http://h30499.www3.HP.com/T5/business-support-forums/CT-p/business-support

  http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413

• LaserJet pro m252 dw: occasional spurious vertical lines

  I create a pdf from latex file that includes a border color for the text box using the installation of "mdframed". In print preview, it looks fine, but when you print, some of the borders have a vertical line of the same color and the same width as the border on the left edge and right out of the box and the height of the box.

  This only happens for some of the boxes, mainly those who are quite narrow.

  PS This does not occur when printing b/w of same page toa HL 2040 brother

  In response to my own question:

  Other tests showed that this problem occurs when printing via PDF-Xchange Viewer, but NOT with SummatraPDF.

  So it looks like an application problem not the printer.

• HP Laserjet 400 M401: How can I get the double paper tray system to work?

  I try to print contracts with the letter and legal pages mixed in. I put legal paper in Tray 1 and tray 2 letter. I have checked a box in the print menu to let PDF determin the size, but when I print everything goes to legal. The product manual does not seem to address the system using double bin at all. Where am going wrong and where can I findinstruction?

  Not very impressed with this forum. Two days out, and no one looked at my post, much less answered! If anyione never reads it and wondered what happened to me, I finlly solves the problem on mine, and my double tray system seems to work just great.

• Order PCL for printer laserjet 600 to use bin source 2

  LaserJet 600 M601. Configured with 3 drawers of paper and and the envelope feeder. I have a program that sends text documents to the printer and I need to know the PCL5 or 6 codes to select the paper tray 2 # print the form. I tried normal codes that are in the PCL manuals but is still the #4 drawer pulls. I also used Esc & l20H and again, he shoots the #4 drawer.

  Hi Bill_esrd,

  If, by chance, the information that dansdaduk has provided does not resolve the problem, I suggest you post in the trade forums since it is a commercial product. You can do it at Business Forum.

  Thanks for your time.

  See you soon,.

• Color LaserJet 3600n's standard paper tray

  We have a Color LaserJet 3600, who had a problem with the standard paper tray being stuck.  Could not get out until we were able to get inside the machine and press the metal plate that makes up the paper when the drawer is in the printer.  After we got him we found a small piece of plastic broken on the end of the right side of the metal plate that sticks through the plastic side of the tray (see picture).  Someone know where I can get this plastic piece without having to buy the whole set?

  In general these tidbits on the bins of paper, like this one, is not available by themselves. We can check the HP parts store to see if the part is available, but probably it will take to get the tray as a single unit.

  I hope this helps.

• LaserJet Pro M177fw: LaserJet Pro M177fw: paper hangs when printing

  Whenever I print the paper gets stuck less than halfway so that the printer display says 'Printing', I cleared the jam several times and tried different settings and it won't work. The book is very good, I tried it on LaserJet Pro my brother. I tried on my laptop Mac and Windows PC, Wifi USB, nothing works.

  Hi@faisaal,

  I see you've found paper jams, the paper goes in at half way and gets stuck. I will definitely do my best to help you.

  Please, try the procedure described in this document to see if it will help to solve this problem.

  HP Color LaserJet M176n MFP Pro and the printers M177fw - solving paper feed or paper jam problems.

  I've included the manual with information on where to look for paper jams or obstructions.

  Start on page 75. Multifunction COLOR LASERJET PRO.

  If the problem persists, please Contact the HP Support for help. Check the model number and the form to receive a file number for faster assistance.

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• Collection of paper LaserJet 3380 noise grinding

  At the start of my laserjet 3380 print there is a grinding noise and paper collection does not work.  I would appreciate any advice, advice or guidance on a possible solution.  It was not crowded with paper in the printer and it was working fine until it suddenly started with the grinding noise whick souds like a hardware problem.

  Not a job for the faint at heart. Do a google search for the service manual. Part you are looking for is RM1-0835-000CN.

  http://www.partsnow.com/shop/internal-components/internal-components/HP-LaserJet-3380-plate-Assembly-right-refurb-OEM-RM1-0835-000CN/200204

• There is paper in the tray, but it displays an error message to load paper?

  LaserJet P2055dn

  Windows 7

  Error message: "load paper"... .but there is paper

  Hi lventura0,

  It is a product of the profit margin. For the best answer to your questions, you need to transfer your question at the following links.

  http://h30499.www3.HP.com/T5/business-support-forums/CT-p/business-support

  http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413

• What damage would result of the use of inkjet paper in a laser printer

  The subject says everything really. If you accidentally use glossy inkjet photo color laserjet, it would harm the printer?

  If this would be how it would hurt it? This replacement parts would be needed.

  Conversely if the paper shining laser for example HP Paper Photo Professional 200 is used in inkjet, it will damage the ink jet printer?

  Thanks in advance,

  Steve

  Glossy paper using ink jet lying in a laserjet damage the laser printer certainly because coated inkjet paper is not designed to handle the high printing laser, especially the roll of oven temperatures.  In a bad case (maybe worse?) coating would be falling apart on the roller, causing damage to the roll and requiring a repair.

  With the help of photo paper designed for laser printing to an ink jet printer should not cause damage, but the results are likely to be poor, lose the impression.

• Load paper printer

  Book paper feeding pulls to the right, resulting in jams or skewed alignment of the printed result.

  Miss Terri Lynn:

  Thanks for your interest.  Answer your questions: (1) model of printer is color LaserJet CP1025nw; (2) Yes, the inclination began after the paper jam allowed; (3) No, it is not plugged into a wall outlet, but a bunch of surge protection; (4) this model does not have a scanner.

  Update: after cleaning the feed roller and the roller that is accessed via the rear panel, the problem seems to have been resolved.  I suspect that remove the paper jam left some deposits of ink on one or two rollers.

  Once again, thank you.

  Chrisbro4415