Sure start

Similar Questions

• Pavilion 14 b009AU Sleekbook: can not start

  Hello. I would like to ask how a sure start in hp pavilion sleekbook 14. I'm trying to hold on to esc and f11 but it did not work now. It does that a few times, but now it won't. Thank you.

  Hello
  
  Depends on what operating system is installed.
  
  Windows 8 / 8.1:
  http://support.HP.com/us-en/document/c03439317
  
  Windows 7:
  http://support.HP.com/us-en/document/c01857654
  
  Concerning
  
  Visruth

• Unable to start: freeze "starting Windows."

  I am unable to boot Vista. The start Windows logo appears, the drive activity light flashes for a few seconds and remains off.

  A sure start Gets the extent of loading CLASSPNP. SYS, and then freezes.

  Technical data: Sony Vaio VGN-FZ280. Vista SP2

  First of all, the problem came when I was watching a DVD on an external display (HDMI). The computer has suddenly just reset and would not restart afterwards.

  If Safe Mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• iMovie has crashed

  My iMovie crashed and would not restore. I deleted and downloaded again. Still no joy. I tried a sure start and now I have it on my desk top to the "VideoAppDiagnostics-iMovieApp-2016-07-10-091846.tar.gz" page. But still no iMovie. Any suggestions?

  Hey there P > Mac,.

  Welcome to the communities of Apple Support! Looks like the iMovie on your iMac app crashed and you are unable to re - open. This is despite the removal, reinstallation and try to open it in safe mode. I'll be happy to take a look at this with you, then you can go back to listening to the request.

  For starters, let's you try to perform a reset of the NVRAM and then retest iMovie. This will not affect any of your important data. Here is a link with the steps:

  How to reset the NVRAM on your Mac.

  Then we would like you create a test user account to see if the same problem persists. It is a really good step to isolate if the problem with iMovie is specific to the user or the system-wide. The following article will guide you in this process:

  How to test a question in another account on your Mac.

  This section provides more detailed information on what to do if the problem is present in one user account, or if the problem occurs in both accounts:

  If a problem occurs in account only one user

  Is using the same steps in a user account test does not cause the same unexpected behavior, most likely you don't need to reinstall applications or OS X.

  • If a problem occurs only in a single application, check the documentation or Web site for instructions on troubleshooting specific preferences or the definition of the application files.
  • If you need help with a problem or a specific alert message, search the Apple support Web site for the text of the alert message you see.

  If a problem occurs in more than one user account

  If the same unexpected behavior occurs in more than one user account on your Mac, try checking for software or hardware problems.

  It would also be beneficial to make sure that your Mac is up-to-date. Before updating your device, make sure that you have a recent backup available. I've included some bandages on these two steps:

  Use Time Machine to back up or restore your Mac

  Update the software on your Mac

  Take care!

• background images (wallpaper) twinkle in view when scrolling in FF

  I think the above sentence on described all this. Essentially, FF flickers power on and off when I scroll. I tried the mode of sure start with addons disabled, reset and I have uninstalled and reinstalled. I have a Windows 7 operating system and that I just installed a new hard drive. This problem started with the new hard drive.

  Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

• iMac hangs after connecting with the interminable spinning beachball, but works in safe mode.

  Plug

  iMac 27 "(mid-2010) running Os X El Capitan 10.11.4"

  Processor: 3.2 GHz Intel Core i3

  Memory: 16 GB at 1333 MHz DDR3

  Problem

  With a normal startup, iMac will start properly and I can successfully connect. Once connected, I immediately get a popup window stating "To open"CS5ServiceManager", you need to install the runtime Java SE 6 legacy." I have the opportunity to click on 'Détails' or 'OK', if I click on what anyone, I immediately get the spinning beachball. I'm sure that he ran the updates at night, because the next morning was when problems began to occur.

  With a sure start, I can connect properly, everything is and I can open applications, it's just very slow.

  What I have done (in no particular order)

  1 Ran first aid utility disk

  2 reinstalled OS X El Capitan

  3 reset the NVRAM

  4. the elements of disabled opening (Dropbox and Google Drive)

  4 Ran correctly in Safe Mode, but when I rebooted the problem still occurred.

  Recently I also upgraded my RAM from 8 GB to 16 GB, it has greatly improved the performance of the machine, and I don't have any problems so far.

  I'm almost to the point of wiping the device to its factory settings, because it is so frustrating me. I really don't store anything on site, everything is in the cloud, or on an external hard drive.

  Flora-flora,

  Please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• HP s 4540 not activate windows 8 from HP, please help recovery DVD

  Hello

  I'm migrating my HP from the hard drive to a new ssd that I bought it. As far as I know windows 8 is supposed to activate based on the code set in the bios of machines, so I bought a hp recovery DVD online as Manager recovery HP seems more delivered with these machines, so I couldn't do one and reinstalled windows 8 on the machine.  After installation and connection to the internet activation has failed, he said that the key was blocked.  This may be, this machine came with 8 pre-installed windows, she must have a valid key and license I already paid.

  I have tried to burn reinstall media using microsoft media creation tool, but it does not work too once it connects to the internet to validate the activation

  I wish to reinstall fees, I'm not even sure the drive I went out of the works more or is not changed at this point, and its bigger than my ssd so cloning would be a problem. And I also read problems cloning windows 8 sure start installs anyway.  In any case, I would like to some how be able to get this back to work.

  Someone from HP can help me please.

  Thank you.

  You are the very welcome.

  Glad you understood what the problem was.

• Mini mac 2012 drop ethernet connection

  2012 mac Mini i7, 16 GB RAM, 1 TB SSD. OS X 10.10.5.

  I have owned this since it was released in 2012 and have had no problems with it until a few weeks ago. There was no putting recent update of the OS or other additions s/w or the material that I could attribute to this issue.

  I noticed a few times a day, a notification is displayed that my wired ethernet is down, then back to the top. Originally it happened so sporadically, I simply ignored him. But yesterday it happened about 50 times in a row, up toward the bottom up toward the bottom up toward the bottom. Usually, when he finally reconnect, the interface would be to 100baseT rather than 1000baseT. Syspref is set on automatically configure.

  My home network has not changed during this period. My cable modem (Motorola SB6141) feeds a router Cisco (Linksys), which feeds an Apple Airport Extreme (latest generation) and another router (I have run two separate subnets, one for business, one for home). EI feeds a switch 8 ports that my Mac Mini is attached. I have reset the cable modem, Linksys, EI, and tried different ports on the switch... Note that no other machines on the network are strange network anomalies.

  I made a sure start yesterday and which seem to help for a while, but I noticed earlier the lights of the switch to the port of MacMini are orange instead of green, indicating 100baseT and of course, it is checked by the syspref config.

  Below is out of the console associated with en0 for today:

  20/02/16 8:19:45.000 AM kernel [0]: AppleBCM5701Ethernet [en0]: link down (inactive disabled womp, proxy)

  20/02/16 8:19:45.689 AM configd [51]: network modified: v4 (utun0:10.105.1.6, en0 -:192.168.11.83) DNS. Proxy - SMB-

  20/02/16 8:19:49.000 AM kernel [0]: [AppleBCM5701Ethernet] Ethernet: link up on en0, 1 Gigabit, duplex full, balanced-flow, Debug control [796 d, 0301, 0de1, 0300, cde1, 3800]

  20/02/16 8:19:51.173 AM configd [51]: network modified: v4 (en0 +:192.168.11.83, utun0) DNS. Proxy + SMB +.

  20/02/16 8:29:49.000 AM kernel [0]: AppleBCM5701Ethernet [en0]: link down (inactive disabled womp, proxy)

  20/02/16 8:29:49.279 AM configd [51]: network modified: v4 (utun0:10.105.1.6, en0 -:192.168.11.83) DNS. Proxy - SMB-

  20/02/16 8:29:53.000 AM kernel [0]: [AppleBCM5701Ethernet] Ethernet: link up on en0, 1 Gigabit, duplex full, balanced-flow, Debug control [796 d, 0301, 0de1, 0300, cde1, 3800]

  20/02/16 8:29:55.637 AM configd [51]: network modified: v4 (en0 +:192.168.11.83, utun0) DNS. Proxy + SMB +.

  20/02/16 9:40:19.000 AM kernel [0]: AppleBCM5701Ethernet [en0]: link down (inactive disabled womp, proxy)

  20/02/16 9:40:19.961 AM configd [51]: network modified: v4 (utun0:10.105.1.6, en0 -:192.168.11.83) DNS. Proxy - SMB-

  20/02/16 9:40:24.000 AM kernel [0]: [AppleBCM5701Ethernet] Ethernet: link up on en0, 1 Gigabit, duplex full, balanced-flow, Debug control [796 d, 0301, 0de1, 0300, cde1, 3800]

  20/02/16 9:40:26.216 AM configd [51]: network modified: v4 (en0 +:192.168.11.83, utun0) DNS. Proxy + SMB +.

  20/02/16 9:41:44.000 AM kernel [0]: AppleBCM5701Ethernet [en0]: link down (inactive disabled womp, proxy)

  20/02/16 9:41:44.327 AM configd [51]: network modified: v4 (utun0:10.105.1.6, en0 -:192.168.11.83) DNS. Proxy - SMB-

  20/02/16 9:41:47.000 AM kernel [0]: [AppleBCM5701Ethernet] Ethernet: link up on en0, 1 Gigabit, duplex full, balanced-flow, Debug control [7949,0021, 0de1, 0300, 0000, 0000]

  20/02/16 9:41:48.000 AM kernel [0]: AppleBCM5701Ethernet [en0]: link down (inactive disabled womp, proxy)

  20/02/16 9:42:01.000 AM kernel [0]: [AppleBCM5701Ethernet] Ethernet: link up on en0, 100 megabits, duplex full, balanced-flow, control Debug [796 d, 0301, 0de1, 0300, 4de1, 0000]

  20/02/16 9:42:03.324 AM configd [51]: network modified: v4 (en0 +:192.168.11.83, utun0) DNS. Proxy + SMB +.

  09:42 the link changed from 1 Gigabit to 100 megabits, but I do not see why. Any ideas on what is happening in the console log? Logic board issue? Others?

  I did not see 'change the cable. Have you tried? The cable between your router and your switch?

  Cable of your mini directly your main router, or modem without going through the rest of your network?

  Do you have any activated energy saving settings?

  You have a lot of variables and breaking points in your system. Difficult to isolate what's going on.

• Satellite A100 screen had a few scratches

  Hi all, I hope I'm posting in the right section...

  My problem is that for a long time, when my laptop was my offbeat system idle and froze. When I forced a reboot the screen has some scratches.

  Once the program loaded grub (double ubuntu/win7), he had a few random weird letters instead of the correct letters.
  After the Boot animation windows, the screen remains blank. I rebooted and tried to log in to ubuntu.

  Ubuntu was telling me something about some error and told me to go under the low resolution.
  Using sure start in windows, I was finally able to enter windows system too. I disabled the driver (?) graphics in the Device Manager, and since then he has been able to start normally, in low resolution, what is.

  The question is, if my graphics card is broken? Because sometimes, the display looks good again. (I see that because there are no weird scratches and I'm able to start with a high resolution). But there again it is broken once again):

  I tried to reinstall the graphics driver many times, but it did not help. And it should be the newest!

  On my system:
  Satellite A100
  nVidia GeForce Go 7600

  Any help/tips/advice much appreciated! Thank you

  > The question is, if my graphics card is broken? Because sometimes, the display looks good again. (I see that because there are no weird scratches and I'm able to start with a high resolution). But there again it is broken once again):

  I'm scared, Yes. It looks like a faulty graphics card.
  You can try to connect the external monitor to the laptop and could check if the same would be visible on the second monitor
  In most cases if the GPU is affected, the stripes are visible on the screen, internal and external.

  Well, in this case you would need a new motherboard. :(

• Login screen that appears suddenly - while I am using the machine

  It started quite recently. Apparently randomly, the login screen is displayed once. If I log in, everything works still.

  These are the error messages:

  12/08/2015 04:30:44.809 com.apple.xpc.launchd [1]: (com.apple.xpc.launchd.domain.user.666) Service "com.apple.xpc.launchd.unmanaged.loginwindow.138" attempted to divert the end point "com.apple.tsm.uiserver" of the owner: com.apple.SystemUIServer.agent

  12/08/2015 04:30:50.832 loginwindow [138]: CoreAnimation: attention, removed the wire with CATransaction uncommitted; Set CA_DEBUG_TRANSACTIONS = 1 in the environment connect backtrace.

  12/08/2015 04:32:10.247 com.apple.xpc.launchd [1]: (com.apple.xpc.launchd.domain.user.666) Service "com.apple.xpc.launchd.unmanaged.loginwindow.138" attempted to divert the end point "com.apple.tsm.uiserver" of the owner: com.apple.SystemUIServer.agent

  12/08/2015 04:32:10.247 com.apple.xpc.launchd [1]: (com.apple.xpc.launchd.domain.user.666) Service "com.apple.xpc.launchd.unmanaged.loginwindow.138" attempted to divert the end point "com.apple.tsm.uiserver" of the owner: com.apple.SystemUIServer.agent

  12/08/2015 04:32:30.545 loginwindow [138]: CoreAnimation: attention, removed the wire with CATransaction uncommitted; Set CA_DEBUG_TRANSACTIONS = 1 in the environment connect backtrace.

  Any suggestions?

  I'm on 10.11.1

  Check first for what is obvious: OS X El Capitan: set your Mac to connect when not in service

  From what you describe, you use actively the Mac in such a case is not likely to be a factor anyway.

  • Are a crash reports generated?
  • You have any peripheral external display connected?
  • Do you know have installed all OS X third party changes, anything, but specifically those who may come into conflict with GPU automatic pass? A sure start will eliminate this uncertainty.
  • Reset the SMC.

  That's all I can think of for now.

• my computer is running in safe mode. How to disable this option?

  I recently had loging problem on the net. My computer has been configured with safe mode. Now everything is ok I can't remove safe mode. How to make a it?

  Hello

  ·         What is the operating system installed on the computer?

  ·         Don't you see that safe mode mentioned on the screen?

  Method 1: Restart the computer and see if it boots into normal mode.

  Method 2: Check if start-up active in the System Configuration settings.

  (a) click Start, type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.

  For Windows XP, click Start, click run , and then type msconfig.exe. Press enter.

  (b) on the Startup tab, make sure Start is not checked under Startup Options. If you make any changes, click apply, OK and restart. Check to see if that helps.

  Please elaborate on the question so that we can help you best.

• WinXP sp2 will not install sp3 for amd machine

  Hello.  I need help.  I'm fixing my computer compaq with sp2 amd 3200 and it will not install xpSP.  I've updated the utility with hp/compaq amd utility and nothing works.  I followed everything here for kb936929 and nothing works.  HELP >...

  Hi JernSuj,

  Please provide us with the information below:

  ·         What is the exact error that you receive when you try to install Service pack 3?

  Download Windows service pack 3 manually from the link below: Windows XP Service Pack 3 installation network for the IT professionals and developers Package:

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=5b33b5a8-5e76-401F-BE08-1e1555d4f3d4

  The calculation of starting in safe mode and install service pack 3: a description of the options of the sure start in Windows XP Mode: http://support.microsoft.com/kb/315222

  Please return back with the results to help us solve problems.

  Another link can be found: how to obtain the latest Windows XP service pack: http://support.microsoft.com/kb/322389

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I installed xp sp3 and now I can't access Add and remove programs in the control panel.what gives?

  I click on Add/Remove and no response?

  Hi cliffy1960,

  Welcome to the Microsoft community forums. Please post your query and giving me the opportunity to help you.

  Method 1:

  I suggest you to perform boot safe mode.

  Check out the link to boot in safe mode.

  A description of the options sure start in Windows XP Mode.

  http://support.Microsoft.com/kb/315222

   

  Method2:

  I suggest you perform the clean boot.

  Check out the link to perform the clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353?WA=wsignin1.0

  Method3:

  I suggest you make the SFC scan.

  Check out the link for the analysis of the SFC.

  File system (CFS) checker.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  WARNING:

  When you run the SFC scan it can ask the installation disc. If please install the installation disc and run the SFC scan.

  If the problem persists, feel free to post us. We're here to help.

  Thank you.

• sound activation module keeps trying to install and how to stop it

  Constantly windows install keeps trying to install the "sound activation module" and is really annoying. I'd appreciate any help available, thanks in advance.

  Hello

  1. have you made changes on the computer before this problem?

  2. do you get any error code or error message?

  3. do you have Sonic software installed on your computer?

  Sonic is the CD burning and packet writing software that comes with your system. The mistake itself probably comes he uses the installer, Install Shield and his Manager update is not installed.

  I suggest you to start the computer in a clean boot state, and check if the problem persists. If the issue is not persistent then try to put the computer in a clean boot state in order to determine the program that causes this problem.

  Step 1: A description of the sure start in Windows XP Mode options:

  http://support.Microsoft.com/kb/315222

  Step 2: How to configure Windows XP to start in a "clean boot" State:

  http://support.Microsoft.com/kb/310353

  Note: once you have completed troubleshooting try the steps to configure Windows to use a Normal startup state.

  Please respond with more information so that we could help you more.

• Windows Installer insist on not requested installation applications

  WINDOWS INSTALL CONTINUES TO APPEAR TO SUPPORT APPLICATIONS WHEN THE COMPUTER STARTS. IT IS INCESSANT AND ANNOYING. ONE OF THE MESSAGES THAT EMERGES IS: THE FEATURE YOU ARE TRYING TO USE IN A CD-ROMM... IT IS NOT AVAILABLE.

  Hello

  1. Why do you think Windows install is popping the message?

  2. don't you make changes to the computer?

  3. What is the exact full error message?

  Start the computer in safe mode.

  A description of the options sure start in Windows XP Mode.

  http://support.Microsoft.com/kb/315222 .

  If the problem does not appear in safe mode, start your computer in a clean boot and check if the problem persists.

  A description of the options sure start in Windows XP Mode.

  http://support.microsoft.com/kb/310353.

  Note: To set the computer back to start normally, use the procedure How to configure Windows to use a Normal startup state in the same page.

  Also, try to get the error information in Event Viewer.

  How to view and manage event logs in Event Viewer in Windows XP.

  http://support.microsoft.com/kb/308427.