surface scan test 2 in the hardware diagnostic tool indicates an error code: hd535-2w. What should I do?

Similar Questions

• The hardware diagnostic tool advises that the SMART short self-test has failed.

  The hardware diagnostic tool advises that the SMART short self-test has failed.

  Is this a problem? What can I do about it?

  Atelier42 wrote: the hardware diagnostic tool advises that SMART short self test failed.

  Is this a problem? What can I do about it?

  Hello Atelier42, this usually indicates that you have a hard disk failure.

  I would like to back up my data as soon as possible, just in case the hard drive breaks down actually.

  You must also make sure that you have the HP Recovery restore set for your system recovery disc in case you do not want to replace the hard drive.

  With this restore HP Recovery disk set, you could replace a defective hard drive and use this disk set to your HP system back as it was when shipped. Then, you could put your data saved on your system.

• Five of the six updates have been installed correctly, KB2698365 failed with error code 80070570. What should I do to install this important update

  Five of the six updates have been installed correctly, KB2698365 failed with error code 80070570. What should I do to install this important update successfully. I'm not a pc expert and don't have no knowledge will take it the word of experts from the pc. KB2698365 is 'important', so I tried to install it several times, but always failing with error code 80070570. I've been on a boring treasure hunt for to install this 'important' update, it seems to find no will to give helpful advice anywhere. I would appreciate help installation of this major update, and talk about normal advice, how to install it successfully without failure of the error code 80070570. What is the error code 80070570.? I use windows vista Home premium, service pack 2, 32-bit operating system. I'm using the essentials of security. Thank you for the consideration of this issue. NIC

  Hi, Grizzly7659,

  Follow the instructions given by Taurian & guenoun

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/error-code-80070570/a2df7d06-BE9B-4554-b796-c52fac838842

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/error-code-80070570/51c5b0d3-BFDD-4f69-bff7-623954866b59

• HP Hardware Diagnostic tool

  Test drive... Surface Scan Test failed

  The test came because a small blue screen appeared on my computer and I disconnected...

  weeziestoy wrote: Hard Drive Test... Surface Scan test failed test came because a small blue screen appeared on my computer and I disconnected...

  Hello weeziestoy, this indicates generally the hard drive is a failure. I suggest to backup your important data and consider replacing the disk hard as soon as possible.

  You need to make sure that the restore HP Recovery disc is set to use to restore the software after the hard drive is replaced.

  If you do not have these or can not create them, you can buy these HP if they keep these available.

• Reinstall the hp hardware diagnostic tool

  I don't know what happened to my HP hardware diagnostic tool. I used it once when I got this computer and sometimes since 2010. It happens in the start menu, but do not work. How can I reinstall it?

  Thank you, Ken

  Hi Ken,

  This tool is a tool of Hewlett-Packard. Get you from HP.com. Its updated regularly, then you are better off to go to get the latest version anyway. Just enter your HP product drivers of the help section, and then select your operating system and get the download of the resulting list.

  If you have any specific questions, post it here and I will help you. Let me know how you fare.

  Kind regards

  BearPup

• Satellite A300-17 years - can't do the tests on the PC diagnostic tool

  I just installed Windows 7 on my laptop A300-17. Everything went very well and I installed all the drivers including PPV but something is worng with the 'pc diagnostic tool', the 'basic information' tab I get all the information corectly but when I go to the tab "diagnotsic tool", it's all the empy, I can't give it a try, just an empty page.

  What could be worng?

  Thank you very much :)

  p.s the windows is in English and Hebrew, not if it's important.

  Hi motti,.

  I even checked the site Web of Toshiba Satellite A300 and Windows 7. It seems that PC diagnostic tool is only available for Windows XP. I can t he find for Vista and Windows 7.

  I think that's the reason. You must download VAP now that it contains.

• What is 5.1.4861.15 hardware diagnostic tools

  What is 5.1.4861.15 hardware diagnostic tools

  Hi Floyd,

  If I am right, it is actually PC-doctor, Inc. Hardware Diagnostic tool which is distributed by some computer program of PC Doctor OEM manufacturers.  The number seems to be a somewhat older version (possibly published with XP systems).  They still do and I have versions for XP, Vista and even Windows 7. If you have upgraded your operating system, the program may or may not work more.  It doesn't seem to be something that you can buy directly (and I don't think that it can be upgraded) - but your computer manufacturer might be able to say more about it.

  Here is the current information on Program OEM's PC Doctor: http://www.pc-doctor.com/pcd_windows.php.  I know that HP and Compaq and Acer and Fujitsu used and can still - and I saw obsolete links and now gone listed this specific version of the program on their systems - but none of their websites discuss the version even if some do not discuss the existence of a program of diagnostics of equipment and how to use it.  Here is an example: If the computer is running XP so that it looks like this (unfortunately not a download link, just info): tests for hardware problems using PC-Doctor - HP Customer Care (United States - English).

  I don't think that it is malware - if I'm wrong.  If your manufacturer says that it was never installed on your computer, so I guess it's possible, but I found only about above it and no mention of all malware related.  In any case, if it was never installed on the system by the manufacturer, then I would probably not use it and may even consider uninstalling just to be on the safe side.  If it has been installed by the manufacturer, try running it to see if it provides you with hardware diagnostic information.  If it crashes or fails to run if you have an operating system upgraded from the original installed OS, then it is probably not compatible and I would just uninstall it as it will be of no use and cannot be upgraded (unless the manufacturer provides one, but it is unlikely) and is just too much room.

  Yet, it can't hurt to run some checks for malicious programs.  Update and run a scan complete with your current AV program.  Then, try the following programs if you do not, because they can help. I recommend you download, install, update and run full scans with Malwarebytes:http://www.malwarebytes.org/ and SuperAntiSpyware:http://superantispyware.com/ and then run a full scan of Microsoft Security:http://www.microsoft.com/security/default.aspx.  If they are all come clean and do not show this as a problem, then I would say it is more likely is not malware and don't worry in this regard.

  I hope this helps.

  Good luck!

• Hardware diagnostic tool

  I have a HP Pavilion G7-1329wm running windows 7. I does not seem that hardware diagnostic tool program.  He seems to be spent on other portable HP like mine, and so I was wondering if there is a place I can download it? I used a link (sp4437.exe) I found on the forum, but after installing it, it says 'this version of diagnostic tools is not approved to run on this system. Y at - it an older version that I need?

  Thank you in advance!

  Your computer uses a Diagnostics UEFI support environment to test the material for questions. Please see HP computers - UEFI and the Start Menu for instructions on using the features of Diagnostics UEFI. Hit "F2" or "ESC" then "F2" at startup should show the UEFI Diagnostics page.

  Download and install the environment of Support HP Unified Extensible Firmware Interface (UEFI) for a version update of the UEFI Diagnostics.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Pavilion p6537: 6.0.5418.39 Hardware Diagnostic tools

  After the upgrade to Windows 10, my monthly hardware diagnostic tool did not work. Received a device discovery error suggesting I restart the program or restart my computer. I performed two operations and diagnostic tool still does not work.  Would that be the upgrade of Windows 10 or just a corrupted file?  Never had a problem with this tool before.

  Hello

  Are you referring to the HP Support Assistant?  If so, uninstall the old version via the Control Panel - program and features, and then install the New HP Support Assistant.

• HP Hardware Diagnostic tools

  I had to do a clean install when upgrading to Vista 64 for Win 7 64 on my HP Pavilion Elite 9160F. Now I am unable to find a download for HP Hardware Diagnostic tools.

  I tried to install an update that was supposed to include most of the tools, but since I did a clean install, it says that my system did not meet the requirements and that it refused to install.

  Is it possible that I can install the Diagnostic tools?

  You may be able to choose the tools off the HP recovery discs.  Software updates listed here are only updated.

• Hardware diagnostic tools error pcdrsinfosystemboard.p5x has stopped working

  pcdrsinfosystemboard.p5x has stopped working message each time I have start hardware diagnostic tools in vista Home premium on hp Pavilion slimline s3700y pc

  My hardware diagnostic tools came pre-installed on my pc when I bought it. I didn't uninstall with revo uninstaller to get rid of all the remains and re-installed using the Recovery Manager. It has been fine since. I hope this helps someone in the future, which could run into this same problem. Thank you for asking. I always wanted to help out where I can in the field of computers, I get so much help from others.

• s/o to the DirectX Diagnostic tool

  Given that the meanings of n/a are:

  # Does not apply
  # Not available
  # Naturally aspirated (non-turbocharged/non-supercharged engine)
  # More ever
  # No answer
  # No act
  # No alcoholic
  # Non-aspire (engine)
  # In North America
  # Is not Acceptable

  .. I was wondering if I'm supposed to do anything on this subject:

  

  Hi Kaloyan,

  Do you have problems with the keyboard and mouse?

  DirectX is a suite of technologies used by many multimedia applications in Windows. If you have problems getting a game or movie to play properly, the DirectX Diagnostic tool can help you find the problem.

  You can consult the following Microsoft articles to get a clear idea of the DirectX Diagnostic tool.

  Diagnosing basic problems with DirectX

  http://Windows.Microsoft.com/en-in/Windows-8/diagnosing-basic-problems-with-DirectX

  DirectX : Frequently asked questions

  http://Windows.Microsoft.com/en-in/Windows-8/DirectX-FAQ

  I hope this helps.

  If you have problems of Windows in the future, let us know and we would be happy to help you.

• When I run mbsa 2.2 I get = firewall tests Windows may be due to an error. (0x8004100e)? What should I do to remove this message?

  When I run mbsa 2.2 I get = firewall tests Windows may be due to an error. (0x8004100e)? What should I do to remove this message? a few hours back this problem wasn't there, but now I'm stuck! Help?

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link: http://social.technet.microsoft.com/Forums/en-US/MBSA/threads

• have windows 7 x 64 and hp deskjet 656c can not load the driver he keeps giving me error code 0 x 00000057 down

  have windows 7 x 64 and hp deskjet 656c can not load the driver he keeps giving me error code 0 x 00000057 down

  Hello

  Please contact the Microsoft community. We will be happy to help you with your concern.

  According to the description, you can not install hp deskjet 656c driver you get error code 0x00000057c.

  How do you try to install the driver? Is it through the disc or via the site?

  Method 1: Use a troubleshooting tool to solve the problem:

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: temporarily Disable the Antivirus and firewall and try to install

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Try to install in the clean boot

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After installing windows update, follow step 3 in the link provided to return the computer to a Normal startupmode.

  Please follow these recommended steps, review the additional information provided and post back if you still have the problem. I will be happy to provide you with additional options.

• When I launch the new photo or the new HDR feature fusion device, they start for about 10 seconds, but then I get the message error "an unknown error has occurred."  What should I do?

  When I launch the new photo or the new HDR feature fusion device, they start for about 10 seconds, but then I get the message error "an unknown error has occurred."  What should I do?

  There is a problem with these models of Leica cameras providing accurate information in the EXIF data F stop. Photomerge for HDR and Panorama will use this information to "mix" the image files. A solution has been found using an EXIF here Editor:

  Re: LR/ACR Pano merger combining Glitch

  This may or may not be the source of your problem, but worth investigating. Try to use any other device non-Leica and do a quick test Panorama or HDR and see if you get the same message.