survey creating model Service Windows profile

Similar Questions

• Cannot 'create profiles of model service' more

  When I try to create a new profile of a model service, FSM State shows 'ongoing',

  but he is stuck on step 3 "set up resolve identifiers" 3%, he try 20 times

  with the error: F16995 [FSM:Stage: failure] resolve the UCS central identifiers (FSM:sam:dme:LsServerConfigure:ResolveIdentifiers)

  then I get the error: F1000035: "[WSF: failure] Configuration service profile xxx (FSM:sam:dme:LsServerConfigure) .

  We have restarted (reboot) the interconnect fabrics, but does not solve the problem.

  We did not any changes recently and it was working fine before. (UCS firmware: 2.1(1b))

  Thanks for your help.

  Doesn't matter if this is the case and you are not using central UCS, make sure that your domain UCS is not save to the center of the UCS, and if it is you should desinscrite it.

  Screenshot to help you see your central UCS UCS unregistered attachment.

  If your UCS has been set to save with central UCS, not it and try to create a service profile.  If it is not to sign up, please send me a screenshot where the WSF is stuck when you create the service from the model profile.

  Please let me know if it helps

• The use of VS2015 to create a C++ Windows Service that works reliably with Windows 7 and 8 and 10

  We have created services windows (log events in the event viewer) using VS6.0 and noticed that they were not reliable running on Windows 7 (and beyond). They stopped unexpectedly after startup and so on.

  We have VS2005, 2010 for the development of Qt and never looked in services portage. We have to bought VS2015 and found that C++ Windows Service models have not been provided for VS 2010. We have inherited code which must remain C++ (c# conversion is not an option for us). Someone out there who has created a Service from Windows C++ for recent versions of OS? It installs with InstallUtil.exe as the most recent services c#?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• In Windows 7, cannot access the user profile get the error "the service user profile Service has no logon.

  When you try to access the user profile, get the error message "the service user profile Service has no logon.  User profile cannot be loaded. "The new profile tried to go through the steps of profile user fix damaged by ms, but trying to create a new user profile to copy the files from the damaged user profile does not display on my C: drive the users folder (as it should).  Anyway to fix the corrupted if user profile profile are available?

  Hello

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
  (or two with the same password) use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

• UCS Central - model of political profile of Global Service with Local SAN Boot

  Hello

  I created a profile Service Global UCS central template to create the ESX Service profile for servers 5 different area of UCS.

  The majority of addresses is assigned in the world i.e. addresses MAC, UUID, etc with the exception of the WWPN where local teams of SAN want to pre-configure the zoning for a defined block of addresses WWPN.

  I intend to use the ID range Qualification policy to assign a block of addresses WWPN to a specific area of UCS, but my main concern is around the creation of Boot SAN policy. As we intend to use the same model of Service Global profile for 5 different areas SAN Boot targets will have to be different.

  Any way to locate startup SAN strategy so I can have only one UCS Global local SAN Boot targets?

  Thank you very much, Paul

  Hi Paul,.

  What you're looking for, it's what we call a 'Boot target Alias', that should work much in the same way that VLAN alias work with UCS 1.1 Central.     Made senior level policy reference to the 'alias', but the actual link (some VLAN or target of Boot or...) will be specific field/DomainGroup and will not be resolved until the SP is associated with a session on a given field.     In the case of prime targets, this would allow for the same Global SP model to be used in several DomainGroups, while the actual target of Boot will vary according to the individual DomainGroup.

  Unfortunately, this feature is not in UCS 1.1 Central.   We have it on the list of features 'high priority' to point 1.2.

  The only 'solution' is to use several global models of the SP, whose name and attributes reflect the underlying objective of SAN-Boot - even if this creates models of N * M (N = # Gech/s;) M = bays of Boot # SAN).

  Hope this helps to enlighten us.    See you soon,.

  -Jeff

• Windows 7 operation system__ 'service user profile Service has no connection. User profile cannot be loaded. » __

  Windows 7 operating system
  When you turn on the computer, I get the login screen normal showing my profile name and asking my password.  When you enter the password, I get:
  "User profile Service service has no connection.  User profile cannot be loaded. »
  Then the machine disconnects me and returns to the request for the password screen.  Unable to get beyond this point.

  This error can usually be fixed by following the steps below. All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  1 log on to a different user account with administrative privileges. If you neglected to make an account additional administrative steps 2-3. Otherwise, continue to step 4. See also General information on setting up the accounts of users at the end of this post.

  2 in Mode safe boot. This, by repeatedly pressing the F8 key as the computer starts. That you will get to the menu on the right where you can use your arrow key to select Mode safe [Enter]. The built-in Administrator account is disabled by default in Windows 7. However, if no other administrative accounts exist on the system it can be activated. If this is the case, you will see an icon for the administrator on the homescreen mode without failure. Login to the administrator.

  3 If you don't see the icon for the administrator mode safe account, then the built-in Administrator account is always disabled so you will need to work more. If you have a Windows 7 DVD installation (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [Enter]

  [Note: do not enter the brackets!]

  If you do not have an installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair the system Windows 7 (not a system recovery!) in the menu diagnosis. This menu of diagnosis is the same one where you can choose Safe Mode.  Or you can make a bootable DVD of Windows 7 repair of the file on this link:

  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. If you create the bootable DVD in an older operating system, you need third-party burning like Nero, Roxio or free ImgBurn software to burn the .iso image image file, not in the form of data. Windows 7 can burn the .isos natively.

  Now, remove the rescue DVD you made, restart windows system and log into the built-in Administrator account, you enabled.

  4. try a system restore to when things worked. If you can log in to your user account, you are finished. Otherwise, continue to step 5.

  5. the critical files are under % systemdrive%\users\user-account\ntuser. The ntuser.dat file is actually a registry hive. Run Regedit high and select HKEY_USERS and "load hive" in the menu. Now, go to:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  There is a line for each profile. If a profile is bad, check:

  (a) that the name of the key does not stop in ".bak" (remove .bak If it)
  (b) that the RefCount value is 0 (change it if it is different)
  (c) that the State value is 0 (change if different)

  Make the necessary changes, close Regedit and try to connect as this user.

  6. If that doesn't solve your profile, it is corrupt. When you do that, you should make a new Standard user account and copy your data to it. Do not delete the old account until you have recovered data you need!

  Once everything works, go to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Windows 7

  You absolutely don't want to have only one user account. Like XP, Vista and all the other modern operating systems, Windows 7 is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want account only one user with administrator privileges in Windows 7 because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it can be more work you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).
  MS - MVP - Elephant Boy computers - don't panic!

• I created a new Admin account and when I went to her, I got the message: "The service user profile Service has no logon. The user profile Service failed to load.

  I created a new Admin account and when I went to her, I got the message:

  "The service user profile Service has no logon.  The user profile Service failed to load.

  What's up with that?

  Hello

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
  (or two with the same password) use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• "The service user profile Service has no logon. User profile cannot be loaded. "and new users are not created in the registry, that is it please help

  I am trying to create new users on my computer windows 8 but it dosent open, I get a message "the service user profile service has no logon. User profile cannot be loaded. "and new users are not created in the registry, that is it please help

  I had the same problem.  Get the «user profile service has no user of logan...» "I tried everything I found online and nothing has worked.  Then I reinforced to the back and looked at the whole picture.  It turns out that it wasn't a computer after all problem but a question of the user.  Under folder C:/users/default in the end I managed to delete all subfolders except appdata.  So when you went to create a new user he could not find the correct files to copy to the new profile to store information in.  To ensure that I had a correct records back into the C:/users/default folder, I went on another computer and just copy paste the new default folder from another computer in the folder users on my computer and erased mine.  Of course I could create my comments and new users account once again.  Finally.

• WINDOWS 7 LOGON WONT ALLOW ME IN: IT SAYS "the service user profile service has no logon user profile loaded canoe."

  IT is SAID (the service user profile service has no logon user profile loaded canoe)

  I help carn can't get into my computer, I am the only user and administrator.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  "The user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Run a generation of political Modeler creates generic Services only and not specific services

  I don't know if I'm missing something in the config or the documentation, but when I build the ruleset on the server of determination it creates generic Services (and I can see in the ListRulebases Service call), but NOT the specific services.  Documentation seems to say that specific services will be generated at the same time as the credits.  I'm doing something wrong?  For the project that I'm working on, it is essential to access specific services.

  Thank you

  In order to create a specific wsdl, all base-level attributes and objectives should have a public name. If they are not modules are deployed with a generic interface only.

  You can enable a warning from Validation to build, that will warn you if you have all the attributes that need public names as follows:

  1. In OPM, on the Tools menu, click options
  2. On the left side of the Options dialog box, choose 'Development of modules', then 'Validation to build '.
  3. Select "Checking Server Compatibility determinations" (checkbox on).
  4. Click OK

  If you rebuild now you you you should get WARNING related to the attributes that need public names.

  Hope this helps

  See you soon

  Frank

• When I connect XP it creates a new user profile for me every time. All my documents are gone?

  When I connect XP it creates a new user profile for me every time. All my documents are gone? When I look at it is a new profile is created each time with 000 ext 001 or 002. I tried the restore. I get the error. any suggestions?

  Hello

  · What is the error message when you try to restore?

  · You receive an error message or error code when you start the computer?

  · Do you remember all the recent changes on the computer before the show?

  · What is the number and the model of the computer?

  See the link below and try the steps in the same and check if it helps: problems with Windows XP if your profile is damaged: http://support.microsoft.com/kb/326688

• "The service user profile Service has no logon. User profile cannot be loaded. »

  When I try to log on to my site its tell me what; "The service user profile Service has no logon. User profile cannot be loaded. »

  Hello cockateils8,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Try the rest of the stage in this article:

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  To resolve this issue, follow these steps:

  1. Delete the profile by using the computer properties dialog box. To do this, follow these steps:
     1. Click Start, right-click computer and then click Properties.
     2. Click on change settings.
     3. In the System Properties dialog box, click the Advanced tab.
     4. Under user profiles, click settings.
     5. In the user profiles dialog box, select the profile you want to delete, click on remove and then click OK.
  1. Click Start, type regedit in the start search box, and then press ENTER.
  2. Search for, and then expand the following registry subkey:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
  3. Right-click the SID that you want to delete and then click on remove.
  4. Log on to the computer and create a new profile.

  Pasted from http://support.microsoft.com/kb/947215>

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• create a second hardware profile for my laptop

  Hey Gang,

  I was more than happy with XP Pro - where the reason for which I only ventured into Vista...

  What I MUST DO, is to create a second hardware profile for my laptop, I need to stop the process 1 million in the second profile... any suggestions would be great.

  Soon, Brad

  Hello

  The feature to create the hardware profile has been removed in Windows Vista and was not added to Windows 7 as well however you can check the link below which could be a workaround to troubleshoot newly installed services.

  Use hardware profiles to troubleshoot Services
  http://TechNet.Microsoft.com/en-us/library/cc754635.aspx

• I get the message "the service user profile Service has no logon. User profile cannot be loaded. »

  Original title: cannot open a session

  I get the message "the service user profile Service has no logon. User profile cannot be loaded. "I can't get on my computer. What can I do? Help, please! I need to get the work done.

  Hello

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  -------------------------------------------------------------------------------------------------------------------------------------

  For Windows 7:

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  -------------------------------------------------------------------------------------------------------------------------------------

  For Vista:
  
  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  -------------------------------------------------------------------------------------------------------------------------------------

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

  Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile