UCS Central - model of political profile of Global Service with Local SAN Boot

Similar Questions

• Addition of vNIC to vNIC connectivity LAN via UCS Central PowerTool (BETA) strategy

  When I try to add a vNIC to a VNIC LAN connectivity strategy using the UCS Central Powertool (v0.94) I got the following error:

  D:\Scripts > Add-UcsCentralVnic-VnicLanConnPolicy - name vmnic0 test
  UcsCentralVnic add: ucc01:Policy org-root/lan-conn-pol-test is resolved remote NPS server. Create/delete/change operations are not allowed.

  On line: 1 char: 1

  + Add-UcsCentralVnic-VnicLanConnPolicy - name vmnic0 test

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: NotSpecified: (not identified-fail: String) [Add UcsCentralVnic], Exception

  + FullyQualifiedErrorId: 170, Cisco.UcsCentral.Cmdlets.AddUcsCentralVnic

  everything I try, I still get the same error each time ("create/delete/change operations are not allowed").

  I use 1.2(1a) version Central UCS and UCS plant PowerTool version 0.94 (BETA)

  Maybe that post you your problem in https://communities.cisco.com/docs/DOC-53127 where are discussed other issues related to the UCS Center powershell.

• Change of address IP UCS Central

  Hello

  Anyone know if it is supported?

  Thank you very much

  Hi Frank

  It's hard, why?

  -Register a domain UCS, does not support DHCP for obvious reasons.

  -You can not change or swap the IP addresses used by Cisco UCS Manager in a domain that is registered with Cisco UCS Central. If you need to change or swap this IP address, you must first cancel the Cisco UCS Central domain registration. You can re-register the domain of the Cisco UCS after changed or exchanged the IP address.

  -If you use a hostname instead of IP address, you must configure a DNS server. If the Cisco's UCS domain is not registered with Cisco UCS Central or DNS management is defined at the local level, configure a DNS server in Cisco's UCS Manager. If the area of Cisco UCS is registered with Cisco UCS Central and DNS management has the overall value, configure a DNS server in Cisco UCS Central.

  So maybe if you used a DNS hostname, instead of an IP address to register a UCS domain, you can change the IP address in the DNS (and IP address in the center of the UCS).  Question is: How can you use UCS Manager to do a reverse DNS lookup and choose the IP address has changed. Write off / registry is not the solution.

  Summary: I don't think that there is a decent solution.

  Walter.

• vSphere Profile-Driven Storage Service crashing

  Any ideas?

  vCenter runs on a box of Windows 2008 Std x 64 with 32 GB of memory and 4vCPUs. It is a virtual machine. We run vCenter version 5.5 1891313.

  We have a problem where the VMware vSphere Profile-Driven Storage service hangs. Everything started after we rebooted the server vCenter two days ago. The only change we have made to the system installed the NetApp Storage Console plugin virtual on the vCenter server. I deleted since. The event log shows "VMware vSphere service oriented storage taken end with 1 special service error service profile (0 x 1).» Any attempt to vmotion a server causes the error "a general error has occurred: invalid response code: 503 service unavailable '. VMware suggestion is to run a fix for Windows 2008 (not R2), Windows6. 0-KB950319 - x 64. It is referenced in an article KB of VMware. This fix is not applicable, as is wrapped in a service pack already applied. If I try to run wrapper.exe use the wrapper.conf for service, the output is as follows:

  Wrapper | --> Wrapper started as Console

  Wrapper | Java Service Wrapper Professional Edition 64-bit 3.4.0

  Wrapper |   Copyright (C) 1999-2010 Tanuki Software, Ltd..  All rights reserved.

  wrapper |     http://wrapper.tanukisoftware.org

  Wrapper |   Global VMware, Inc. a license for VMware vSphere Profile-Driven storage

  Wrapper |

  Wrapper | Launching a JVM...

  JVM 1 | WrapperManager: initializing...

  JVM 1 | WrapperManager: 31300 already in service Port, using the port 31301 instead.

  JVM 1 | March 10, 2015 init org.apache.catalina.core.AprLifecycleListener 13:28:53

  JVM 1 | NEWS: APR based Apache Tomcat Native library that allows optimal performance in production environments was not found on the java.library.path:... / lib

  JVM 1 | March 10, 2015 init org.apache.coyote.AbstractProtocol 13:28:53

  JVM 1 | INFO: Initializing ProtocolHandler [' bio-http - 0.0.0.0 - 8200 ']

  JVM 1 | March 10, 2015 init org.apache.coyote.AbstractProtocol 13:28:53

  JVM 1 | INFO: Initializing ProtocolHandler [' bio-http - 0.0.0.0 - 8201 "]

  JVM 1 | March 10, 2015 13:28:53 org.apache.catalina.core.StandardService startInternal

  JVM 1 | INFO: Start the Tomcat service

  JVM 1 | March 10, 2015 13:28:53 org.apache.catalina.core.StandardEngine startInternal

  JVM 1 | INFO: Starting the Servlet engine: VMware vFabric tc LIFE 2.8.1.RELEASE/7.0.32.B.RELEASE

  JVM 1 | March 10, 2015 13:28:53 org.apache.catalina.startup.DigesterFactory register

  JVM 1 | WARNING: Could not get url for /javax/servlet/jsp/resources/jsp_2_0.xsd

  JVM 1 | March 10, 2015 13:28:53 org.apache.catalina.startup.DigesterFactory register

  JVM 1 | WARNING: Could not get url for /javax/servlet/jsp/resources/jsp_2_1.xsd

  JVM 1 | March 10, 2015 13:28:53 org.apache.catalina.startup.DigesterFactory register

  JVM 1 | WARNING: Could not get url for /javax/servlet/jsp/resources/jsp_2_2.xsd

  JVM 1 | March 10, 2015 13:28:53 org.apache.catalina.startup.DigesterFactory register

  JVM 1 | WARNING: Could not get url for /javax/servlet/jsp/resources/web-jsptaglibrary_1_1.dtd

  JVM 1 | March 10, 2015 13:28:53 org.apache.catalina.startup.DigesterFactory register

  JVM 1 | WARNING: Could not get url for /javax/servlet/jsp/resources/web-jsptaglibrary_1_2.dtd

  JVM 1 | March 10, 2015 13:28:53 org.apache.catalina.startup.DigesterFactory register

  JVM 1 | WARNING: Could not get url for /javax/servlet/jsp/resources/web-jsptaglibrary_2_0.xsd

  JVM 1 | March 10, 2015 13:28:53 org.apache.catalina.startup.DigesterFactory register

  JVM 1 | WARNING: Could not get url for /javax/servlet/jsp/resources/web-jsptaglibrary_2_1.xsd

  JVM 1 | March 10, 2015 start of org.apache.coyote.AbstractProtocol 13:28:54

  JVM 1 | INFO: From ProtocolHandler [' bio-http - 0.0.0.0 - 8200 ']

  JVM 1 | March 10, 2015 start of org.apache.coyote.AbstractProtocol 13:28:54

  JVM 1 | INFO: From ProtocolHandler [' bio-http - 0.0.0.0 - 8201 "]

  JVM 1 | March 10, 2015 init org.apache.coyote.AbstractProtocol 13:28:55

  JVM 1 | INFO: Initializing ProtocolHandler [' bio-http - 0.0.0.0 - 32010 ']

  JVM 1 | March 10, 2015 init org.apache.coyote.AbstractProtocol 13:28:55

  JVM 1 | INFO: Initializing ProtocolHandler [' bio-http - 0.0.0.0 - 32100 "]

  JVM 1 | March 10, 2015 13:28:55 org.apache.catalina.core.StandardService startInternal

  JVM 1 | INFO: Start the Tomcat service

  JVM 1 | March 10, 2015 13:28:55 org.apache.catalina.core.StandardEngine startInternal

  JVM 1 | INFO: Starting the Servlet engine: VMware vFabric tc LIFE 2.8.1.RELEASE/7.0.32.B.RELEASE

  JVM 1 | March 10, 2015 start of org.apache.coyote.AbstractProtocol 13:28:55

  JVM 1 | INFO: From ProtocolHandler [' bio-http - 0.0.0.0 - 32010 ']

  JVM 1 | March 10, 2015 start of org.apache.coyote.AbstractProtocol 13:28:55

  JVM 1 | INFO: From ProtocolHandler [' bio-http - 0.0.0.0 - 32100 "]

  JVM 1 | 13:28:56 opId = ERROR - cannot save the SPS in QS:com.vmware.vim.binding.dataservice.fault.AlreadyExistsFault:

  JVM 1 |

  JVM 1 | inherited from com.vmware.vim.binding.dataservice.fault.AlreadyExistsFault

  JVM 1 | 13:28:57 opId ERROR = - Impossible to add the XML document to QS:com.vmware.vim.query.client.exception.ValidationException: got the status code: reason 400: bad request

  JVM 1 | 13:28:57 opId ERROR = - politics of Storage Service could not be initialized: com.vmware.sps.fault.PersistenceException: failure of persistence with the exception

  JVM 1 | WrapperSimpleApp:

  JVM 1 | WrapperSimpleApp: Encountered an error main running:

  JVM 1 | WrapperSimpleApp: com.vmware.sps.fault.SpsInitializedException: politics of Storage Service could not be initialized.

  JVM 1 |

  JVM 1 | WrapperSimpleApp: at com.vmware.sps.SpsLocalService.run (unknown Source)

  JVM 1 | WrapperSimpleApp: at com.vmware.sps.StorageMain.main (unknown Source)

  JVM 1 | WrapperSimpleApp: at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  JVM 1 | WrapperSimpleApp: at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)

  JVM 1 | WrapperSimpleApp: at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)

  JVM 1 | WrapperSimpleApp: at java.lang.reflect.Method.invoke (unknown Source)

  JVM 1 | WrapperSimpleApp: to org.tanukisoftware.wrapper.WrapperSimpleApp.run(WrapperSimpleApp.java:244)

  JVM 1 | WrapperSimpleApp: at java.lang.Thread.run (unknown Source)

  JVM 1 | WrapperSimpleApp: Due: com.vmware.sps.fault.PersistenceException: failure of persistence with the exception

  JVM 1 | WrapperSimpleApp: at com.vmware.sps.qs.InventoryServiceImpl.persistEntityAsString (unknown Source)

  JVM 1 | WrapperSimpleApp: at com.vmware.sps.qs.InventoryServiceImpl.persistEntity (unknown Source)

  JVM 1 | WrapperSimpleApp: at com.vmware.sps.datastore.StorageCapabilityServiceImpl.createSystemLabelCapability (unknown Source)

  JVM 1 | WrapperSimpleApp: at com.vmware.sps.datastore.StorageCapabilityServiceImpl.createSystemLabelCapability (unknown Source)

  JVM 1 | WrapperSimpleApp: at com.vmware.sps.datastore.StorageCapabilityServiceImpl.initializeSystemCapability (unknown Source)

  JVM 1 | WrapperSimpleApp: at com.vmware.sps.datastore.StorageCapabilityServiceImpl.initializeService (unknown Source)

  JVM 1 | WrapperSimpleApp:... 8 more

  JVM 1 | WrapperSimpleApp: Due: com.vmware.sps.fault.QsQueryException: document adding XML to query the xDB service failed:

  JVM 1 | WrapperSimpleApp: at com.vmware.sps.qs.SpsQsProvider.addContent (unknown Source)

  JVM 1 | WrapperSimpleApp:... 14 more

  JVM 1 | WrapperSimpleApp: Due: com.vmware.vim.query.client.exception.ValidationException: got the status code: reason 400: bad request

  JVM 1 | WrapperSimpleApp: to com.vmware.vim.query.client.impl.ValidationHelper.validateResponseCode(ValidationHelper.java:29)

  JVM 1 | WrapperSimpleApp: to com.vmware.vim.query.client.impl.HttpUtil.executeWithNoResponse(HttpUtil.java:65)

  JVM 1 | WrapperSimpleApp: to com.vmware.vim.query.client.provider.impl.AtomFeedPosterImpl.postFeedImpl(AtomFeedPosterImpl.java:76)

  JVM 1 | WrapperSimpleApp: to com.vmware.vim.query.client.provider.impl.AtomFeedPosterImpl.access$ 000 (AtomFeedPosterImpl.java:28)

  JVM 1 | WrapperSimpleApp: to com.vmware.vim.query.client.provider.impl.AtomFeedPosterImpl$ 1.doAction(AtomFeedPosterImpl.java:44)

  JVM 1 | WrapperSimpleApp: to com.vmware.vim.query.client.provider.impl.AtomFeedPosterImpl$ 1.doAction(AtomFeedPosterImpl.java:41)

  JVM 1 | WrapperSimpleApp: to com.vmware.vim.query.client.impl.RetryAction.execute(RetryAction.java:33)

  JVM 1 | WrapperSimpleApp: to com.vmware.vim.query.client.provider.impl.AtomFeedPosterImpl.postFeed(AtomFeedPosterImpl.java:41)

  JVM 1 | WrapperSimpleApp: at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  JVM 1 | WrapperSimpleApp: at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)

  JVM 1 | WrapperSimpleApp: at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)

  JVM 1 | WrapperSimpleApp: at java.lang.reflect.Method.invoke (unknown Source)

  JVM 1 | WrapperSimpleApp: to com.vmware.sps.util.impl.ServiceProxyFactory$ ProxyInvocationHandler.invokeMethod (unknown Source)

  JVM 1 | WrapperSimpleApp: to com.vmware.sps.util.impl.ServiceProxyFactory$ ProxyInvocationHandler.invokeMethod (unknown Source)

  JVM 1 | WrapperSimpleApp: to com.vmware.sps.util.impl.ServiceProxyFactory$ ProxyInvocationHandler.invoke (unknown Source)

  JVM 1 | WrapperSimpleApp: at com.sun.proxy. $Proxy41.postFeed (unknown Source)

  JVM 1 | WrapperSimpleApp: at com.vmware.sps.qs.SpsQsProvider.createAtomFeed (unknown Source)

  JVM 1 | WrapperSimpleApp:... 15 more

  Wrapper | <-wrapper order

  Thank you. I could see this thread before I post my article. Finally, I supported on VMware to help me despite not being able to apply the patch. I was up to a high level engineer who determined that the Inventory Service database is corrupted and to rebuild. After completing this task, everything is now operational. I hope this helps anyone else who encounters this situation.

• In regard to the global inventory and local inventory

  Hello
  
  What are the inventory we need to define before installing R12.1.1 on any platform.
  
  
  IAM describing how I installed the R12.1.1 applicatain on linux dilated.
  
  
  I PUT one PLACE of the INVENTORY IN THE /etc/oraInst.loc
  
  THE OWNER OF THESE PREMISES, THE INVENTORY IS ORAPROD (ORACLE USER).
  
  I GAVE THE 777 PERMISSIONS TO THE FOLDER OF THE INVENTORY.
  
  
  
  I STARTED THE FAST OF THE ROOT USER INSTALLL.
  
  OWNER OF DATABASE SPEICFYING - ORAPROD LEVEL.
  
  SPECIFICATION OF APPLICATION TIER OWNER - APPLPROD.
  
  
  I FINISHED THE INSTALLATION.
  
  EVERTHING WORKS FINE.
  
  
  
  WHEN IAM TRYING TO RUN THE OPatch lsinvneotry of the AS10.1.3 House.
  
  HIS WATCH IS NO INVENOTRY.
  
  
  
  Show that I JOINED THE NEW INVENTORY in the/etc/oraInst.loc.
  
  
  I run the runinstaller to join the House of AS10.1.3 House.
  
  
  the same process as I did to the AS10.1.2 House.
  
  
  the location of the inventory is the same for the AS10.1.2 and the AS10.1.3.
  
  
  
  I mean that's my confusion
  
  What is the use of the global inventory.
  
  What is the need of local stocks.
  
  When and where we need to put the local inventory.
  
  When and where we need to put the global inventory.
  
  
  
  HOW MANY LOCAL INVENTORY MUST SET UP DURING THE INSTALLATION THE INSTALLATION OF R12.1.1.
  
  Please provide information about the local inventory and the overall invenotry.

  WHEN IAM TRYING TO RUN THE OPatch lsinvneotry of the AS10.1.3 House.

  HIS WATCH IS NO INVENOTRY.

  This patch you are trying to apply?

  Did you source the file correct env? What is "echo $ORACLE_HOME" returns?

  What is the use of the global inventory.

  What is the need of local stocks.

  When and where we need to put the local inventory.

  When and where we need to put the global inventory.

  HOW MANY LOCAL INVENTORY MUST SET UP DURING THE INSTALLATION THE INSTALLATION OF R12.1.1.

  Please provide information about the local inventory and the overall invenotry.

  All you questions are answered in these documents.

  How to find the location of the GLOBAL stock and LOCAL stock on R12.x? Need for clarification Oracle inventory [ID 878717.1]
  How to create, update or re-create the central inventory of the Applications R12 [742477.1 ID]
  Global and Local inventory explained [360079.1 ID]

  Thank you
  Hussein

• I have a model end of 2013 13 MacBook Pro with 4 GB or RAM retina and think to upgrade to El Capitan. Is this enough RAM

  I have a model end of 2013 13 MacBook Pro with 4 GB or RAM retina and think to upgrade to El Capitan. Is this enough RAM

  Of course you can upgrade to El Capitan. But I think better if you can change the internal hard drive (SATA drive) in the SSD drive. You will get better results, faster than still, you only have 4 GB. This is mine... MacBook pro in early 2011.

  

• Model a block synchronous dual-port RAM with LabVIEW FPGA

  This question caught my attention recently.

  I am trying to model a particular design element called "RAMB4_S8_S8" with the LabVIEW FPGA module. This element is a block synchronous dual-port RAM allowing simultaneous access to two ports independently from each other. That being said, a port can perform read/write operation to this RAM while at the same time, the other port might be able to do the same thing. There are two opportunities of possible port conflict, however. The first is when both ports are trying to write to the same memory cell. The other scenario is when a port writes in a cell memory while at the same time the other port reads from it. Other than that, everything should be a legitimate operation.

  In order to reproduce this I select memory block that is integrated into my FPGA target. An interface is configured to be the playback mode, and the other is set to write fashion. For the option of arbitration, I let the two interfaces to be "arbitrate if several applicants only. Then I got a compiler error when I tried to run my FPGA code for this model in a SCTL. The error message is something like "several objects to request access to a resource through a resource configured with option interface" arbitrate if several applicants only ", which is supported only in the single-cycle Timed loop if there is only a single applicant by interface.

  This error goes away if I replace the SCTL with a simple while loop, but not what I would like to implement. So I wonder if there is a better solution to this problem, or is it just the limitation of the LabVIEW FPGA module.

  Thank you.

  Yes, you can use a form of conduct to perform the operations you want in the generations clock cycles, but all the code is inside a single SCTL. Basically, read the first address and storing in a register in a single cycle and then read the second address in the second clock cycle. This would allow you to two readings of valid memory every clock cycle 2. I have included a crude extract to illustrate the concept. The case selectors are identical with address A being connected to the memory in the true case, B in the case of fake address. Your biggest model memory dual port will be intact, but it will operate at 1/2 rate.

  Take a look at the white paper that provides more details on the construction of memory:

  Data on a target FPGAS (FPGA Module)

  The ball on the memory block indicates that memory block double port cannot be applied in a configuration of reading, which is a double ROM. access read/write port must be imitated with custom code.

• Phone call Platnum Global Services

  Received several phone calls from Platnum Global services. I refused to allow any "service" to my PC

  until I got a phone number vfrom call - back.  The number was not a toll-free number.

  Provided the number was321 200-0107 and said to be in California, to find errors sent to

  Windows. The Web site, they said that correct is... link... note indicative of North Carolina...

  http://platinumglobalservices.com/

  Hello

  "to find errors sent to Windows.

  There are NO errors sent to anyone.

  It's a scam.

  It is general guidance for this type of "cold" calls.

  Either these so-called "Microsoft" Tech companies want to sell you a worthless software, or remote access to your computer to try to steal your credit card and bank information and also achieve an identity theft on you.

  If you gave them remote access and you do Internet banking, contact your bank, to explain, and change passwords.

  If you use your online credit card, cancel and get a new one issued to you.

  And the only way that willl you know that you are free to them is to backup your data and do a clean install of your operating system.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And Microsoft does not contact you unless YOU have made prior arrangements with them to do.

  There is an article in the link I'm you provide at the end of this one

  Read this Information from Microsoft:

  "Avoid scams to phone for tech support.

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  Don't be fooled of unsolicited calls. Don't provide personal information.

  Here are some of the organizations that cyber criminals claim to come:

  • Helpdesk Windows

  • Windows repair center

  • Microsoft technical support

  • Microsoft technical support

  • Windows Support Group Technical Department

  • Microsoft Research and Development Team (team of Microsoft R & D)

  See you soon.

  .

  p.s. Great these crooks use other people legitimate Web site URL into their scam.

• User profile hive cleanup service do not appear to work with Vista!

  HII,
  The user profile Hive Cleanup service do not seem to work with Vista. Does
  Anyone know equivalent that please. Thank you.

  You should post the question with all the details in the forum on TechNet here server:

  http://social.technet.Microsoft.com/forums/en/categories/ MS - MVP - Elephant Boy computers - don't panic!

• Portlets global services control

  Hi, I'm creating my view using global services. I thought to use the portlet control who appears in most of the default views (summary etc). Is it possible to do? If so, how can use control of portlet to add my own data to my overall opinion about thanks in advance.

  Sorry, that is not available in the SDK as a stand-alone control control of portlets.

• VMware vSphere profile focused on service of storage AND VMware vCenter Storage Monitoring Service alerts

  Hi all

  I installed VC 5.5.0b in-bound on a Windows Server 2008 mode. The Installation goes very well and everything looks good, but when I check the service of vCenter status it shows that both services have an alert

  The Services are

  

  I checked the log file vws.log and found the below error message

  [ ERROR com.vmware.vim.health.impl.ComponentSpec] Impossible to recover health for com.vmware.vim.sms of http://localhost/sms/health.xml

  ERROR com.vmware.vim.health.impl.ComponentSpec] failed to retrieve com.vmware.vim.sms from any of its URL of health health

  [ ERROR com.vmware.vim.health.impl.XmlUtil] Error recover health of url: http://localhost/sps/health.xml

  java.io.FileNotFoundException: http://localhost/SPS/health.XML

  at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown_Source)

  I tried steps below

  • I'm not using a port number personalized according to the http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2007834
  • I stopped the WebClient Service > > restarted VC Service but not go
  • The Windows Firewall is disabled

  My virtual database uses a custom instead of 1433 port.

  Please suggest what I can try next

  Thanks in advance

  This service is supposed to be there, anyway you can try to repair the installation. This article talks about re - install VMware vSphere profile Driven Storage service: upgrading to vCenter Server 5.0 Update 1, 5.1, or 5.5 fails and the Setup Wizard is interrupted (2017147)

• I'm trying to open an a 810 nikon raw file but does not open. said gross can't camera model. I have re installed nx2 with erroe u43m1d207. How to open raw files?

  I'm tryng to open an a 810 Nikon raw file, but does not open. Said GROSS CAN'T camera MODEL.  I have re installed nx2 with error code u43m1d207. How to open a file.

  You can use the dng converter if update your adobe programs fails.

  Adobe - Adobe Camera Raw and DNG Converter: for Windows: Adobe DNG Converter 8.7

• How can I create a profile of the camera with camera raw?

  Hello

  How can I create a profile of the camera with camera raw without x-rite or any other third party software?

  I have a color checker, with a different shade of colors gray and different

  I remember on a script or something like that

  I have a lot of google, but without luck

  can I create my camera raw profile using a corrector of color with photoshop acr?

  I don't know, but this should be the script http://Simon.Tindemans.EU/tools/AcrCalibrator , non ?

  but I don't know how to use it

  Is there a tutorial? Perhaps a video to create a profile with camera raw

  Thank you

  Greetings

  Hello, I think you are looking https://www.adobe.com/cfusion/entitlement/index.cfm?e=labs%5Fdngprofileeditor

  Here is a PDF from adobe on this subject: http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/products/photoshop/pdfs/cs6/ DNGProfile_EditorDocumentation.pdf

  And an article: http://www.luminous-landscape.com/reviews/accessories/dng-profiles.shtml

• The UCS Central + Disjoint layer 2

  We would like to migrate to use UCS Manager 5 cloves separated the Central use of UCS.  We are looking for the best way to set up a VLAN global everything using an infrastructure Disjoint Layer 2.  It seems I would have to create across the world and assign them to a profile in a BASKET for them to get pushed down to this POD, and then in the UCS Manager I would have to get in the VIRTUAL LAN Manager to assign the VLAN for the uplinks appropriate.  Is there a way that we can implement the Manager of vlan in Central UCS or maybe a way to push the VLAN down to the PODS at the beginning then do not remember to do only after the VLAN has been assigned to a profile?

  Hi Jason

  Check https://communities.cisco.com/docs/DOC-35264

  1.3.1a release has the following features:

  ....

  Ability to push the VLAN / VSAN Global to areas of the UCS without using an association of Global SP

  .....

  Walter.

• iPhone IS - what model is the phone of "Global"?

  Hello

  I am very interested in the iPhone (SE) and intend to buy at the price high. I intend to use T-Mobile as carrier in the United States and also use it when I travel to the Japan and Hong and buy the sim card in these countries and pop in the phone to at least be able to use LTE data, so that it is the CDMA phone or GSM does not concern me as much as the voice call is not so important (I can get by him using VOIP like Skype). I don't want to use roaming when I'm abroad.

  According to the page to support LTE, http://www.apple.com/iphone/LTE/, there are 2 models, A1662 A1723.

  After the online chat with the Apple support, they told me have chosen Sprint as mobile provider will make me the A1723 and other options - at & t, Verizon, T-Mobile, Sim free will make me the A1662.

  Since I want to use T-Mobile in the United States, if my understanding is that only A1662 is supported. But, according to http://www.apple.com/iphone/LTE/, support to the Japan LTE networks are not listed for A1662.

  My question is, is it really true that A1662 is not supported at the Japan? When I look at LTE bands support of these two models, the only group who lack to A1662 are:

  7 (2600 MHz)

  28 (700 MHz APT)

  38 (TD 2600)

  39 (TD 1900)

  40 (2300 TD)

  41 (2500 TD)

  Missing these bands really makes a big difference?

  I currently have iPhone 5 A1429 and successfully used in the Japan with a local SIM card and got the LTE speed, and supported by the A1429 bands are ALL supported by A1662, so I really confused.

  Thanks for reading my long question and hope someone can help us with that.

  This article in PC magazine answers this question http://www.pcmag.com/news/343091/the-iphone-se-is-not-carrier-agnostic

  Basically, it says that the two models sold in the United States will work in the world, but if you buy version Verizon, ATT or TMobil in the States, which are all the same phone, A1662, there the slowest speeds LTE overseas (the Canada and the Russia are mentioned in the article), since it lacks broadband LTE 13.

  The phone Sprint to the United States is another phone, model A1723, and it is the same model sold overseas (except China, which gets its own phone, model A1724), but the Sprint phone does not work on Verizon (lack band 13), and missing also band 29, so it will work on ATT, he won't go to maximum speed for data Although it works perfectly on Tmobil.

  So the simple answer is that all US phones will work abroad, but buy the Sprint phone in the United States is to purchase high speed for global use of the data and that the phone also works on fine Tmobil and ATT, but at speeds slower data, but it will not work on Verizon.