suspend problems

Similar Questions

• Hypernating Ubuntu 8.1 + suspend problems on satellite A300-15 has

  I got a Satelite A300-15A and I installed the top Ubuntu operating system. But every time that I put it to suspend or hypernate, it starts again.
  When I press the power button I get a black screen with glitch (green stripes on top)

  Any ideas on how to fix it?

  Hello

  It is not easy to offer a solution to this. Satellite A300 is not supported with this problem and Linux, you're on your own.
  Check some Ubuntu forum. You're more likely to get good advice there.

  Otherwise, if Ubuntu works well you should be happy about it. This little problem shouldn't be that important to you.

• L450 suspend problem

  Hello

  I just bought a L450 (without fingerprint reader) and directly updated for Windows 10. The problem appears after crossing into suspend mode. When I try to turn it back on, there is no response: the screen remains black and the status led goes on.
  I tried to update the BIOS to the latest version, but it's always the same.

  Anyone with the same problem or suggestion?

  Thank you
  Pablo.

  Finally solved the problem!
  It's as simple as the MEI Driver version 11 update. Despite this, I think that the process of implementing sleep and weakening upward again is slower than expected (at least in my case, it's a slower way that shoot from the back of the PC). But at least we can suspend our computers now!
  I hope that helps!

• Suspend problems in mode: don't wake up from sleep

  Hello!

  I just installed Windows 7 to my HTPC. Media Center is great!
  But I have a problem. When I put my computer to sleep he wakes more. In fact it isn't even sleep properly. It seems that everything is turned off but the graphics card. There is no picture but the fan is screaming. He is unresponsive to the buttons of the mouse or the keyboard. Even the computer power button does not wake up or restart. All I can do is press the power button for a while to make the computer stop. I have a Logitech wireless set with PS/2 Sockets. I rechecked all power management settings already. In the BIOS are enabled all supports the ACPI and wake up PS/2 support. I can't understand how to fix it!

  For this afternoon, I tested Ubuntu 9.10 and had similar problems there. In Windows XP sleep works very well, however.

  My transactional includes:
  AMD Athlon 3200 +.
  Asus A8V - XE motherboard
  Kingston 2GB DDR
  GF 8600 GT 256 MB
  Seagate Barracuda SATA 250 GB (for BONES)
  WD Caviar 750 GB SATA (for data)

  Now, I found that it is the USB controller who refuses to go to sleep. There is a hidden feature in Windows 7 that you can use to find problems in the energy saving modes.

  In the command prompt, give a command:
  powercfg-energy
  and it will generate a report on the problems in your system. The report can be found at /Windows/System32/energy-report.html
  My report has revealed that there are two or three USB host that cannot be suspended correctly. After disabled USB support in the BIOS of the system had no problem in sleep. Of course I can't use USB devices more.
  Is there some kind of fix or tweak for Windows 7 USB drivers? Windows shows it has the latest drivers if I try to update.
  My motherboard is Asus A8V - XE, and there Via K8T890 chipset.
  EDIT:
  I found an answer on this thread: http://social.answers.microsoft.com/Forums/en-US/w7performance/thread/8059106b-21e2-4d17-bf2f-513a5b5d1d0b/
  Apparently it wasn't a USB socket that wasn't able to sleep but a USB device. I had a USB Memory Stick and the infrared receiver plugged and after removing their sleep works very well.

• vmrun suspend problem of VMware Player

  I've been using VMware workstation for a while but recently switched to VMware player 3.0, (largely because of the irritating instllation problems for Workstation 6.5.3 under Ubuntu 9.10 x86_64).

  With my computer, I use the vmrun command close all my virtual machines.

  Despite downloading the latest version of Vmware-vix (1.8.1), vmrun suspend & lt; path to the vmx file & gt; generates this error message:

  Unable to connect to the host

  Error: Type of Service VIX_SERVICEPROVIDER_VMWARE_WORKSTATION

  My reading of the documentation seemed to suggest that vmrun must work with the player as a workstation. Please could someone help me understand what ' I'm missing here?

  Thank you very much

  Enter the code < code > < code > here you use the t on vmrun indicator to indicate that the target is a vmware player? :

  < Code >-T < hostType > (ws| ) Server| server1 | fusion| esx| vc| Player )< code >

  I was able to run suspend with:

  <code>$ vmrun -T player suspend /export/vmware/cmp/cmp.vmx
  
  
  </code>
  

  It is with the version of the player (3.0.0 build-203739) included in VMWare Workstation 7 (on Ubuntu 9.10).

  of http://serverfault.com/questions/97999/vmrun-suspend-vmware-player-problem

  StarWind software developer

  www.starwindsoftware.com

• Mouse pointer freezes when returning from standby mode. I have to restart to solve this problem

  I re install mouse drivers. Everything else seems ok

  I finally found a solution for the mouse freeze problem which has been a pain in the A * because I bought the wireless mouse and used with my Windows 7 laptop. Try it to see if it works for me.

  THE MOUSE FREEZE PROBLEM SOLVED! (HOPE THIS HELPS)

  >>
  Mouse freeze problem is more likely to be linked to the USB SUSPEND MODE as most mice now use the USB port to connect the blow in.
  >>
  You can try this out. It works for me.
  >>
  Go in select
  >>
  According to what plan of power, you are 'Balance' or 'Power Saver', select the accordingly
  >>
  Select and expand <+USB settings="">by clicking the <+>sign
  >>
  Enlarge it <+USB selective="" suspend="" setting="">by clicking on the <+>sign
  >>
  Set both & on "Disabled" and click 'Apply'
  >>
  GEL MOUSE (SUSPEND) PROBLEM HAS DISAPPEARED FOR ME!
  >>
  Hope it will be useful.
  >>
  See you soon,.
  >>
  cybersam999
  >>

• Z3 BlackBerry battery blackberry Z3 problem

  Dear team
  I bought the blackberry mobile Z3 August 16, 2014 by snapdeal. My mobile battery does not work correctly & also suffered suspended problem.kindly solve this problem as soon as possible.
  Thank you
  Amit Agrawal
  Mathura (TOP)
  88688005151

  Dear team
  My laptop's battery for the last 15 days problem you also recommend me reset the mobile, but I don't know how to reset the mobile.

  Thank you
  Amit Agrawal
  Mathura (India)
  8868805151

• the mouse freezes and bumps all the time

  I have my mouse and it freezes in place and bumps, it almost constantly. Help

  I finally found a solution for the mouse freeze problem which has been a pain in the A * because I bought the wireless mouse and used with my Windows 7 laptop. Try it to see if it works for me.

  THE MOUSE FREEZE PROBLEM SOLVED! (HOPE THIS HELPS)

  >>
  Mouse freeze problem is more likely to be linked to the USB SUSPEND MODE as most mice now use the USB port to connect the blow in.
  >>
  You can try this out. It works for me.
  >>
  Go in select
  >>
  According to what plan of power, you are 'Balance' or 'Power Saver', select the accordingly
  >>
  Select and expand <+USB settings="">by clicking the <+>sign
  >>
  Enlarge it <+USB selective="" suspend="" setting="">by clicking on the <+>sign
  >>
  Set both & on "Disabled" and click 'Apply'
  >>
  GEL MOUSE (SUSPEND) PROBLEM HAS DISAPPEARED FOR ME!
  >>
  Hope it will be useful.
  >>
  See you soon,.
  >>
  cybersam999
  >>

• keyboard and mouse freeze, hang, do not work

  again, the question was better but once again tonight.

  I have windows xp pro, acer power non-portable pc, ps2 requires laser (not wireless) mouse.

  at random times and programs, they will work and the mouse may hang and then keyboard. Sometimes I can take the mouse out of the back and use it in another form. Sometimes he stop and go in that direction or not responded on the card, even if the light is on. I heard today 3 beeps of the tower and the keyboard and the mouse has frozen.  If the keyboard is blocked so the only thing I can do is turn it off and restart. I don't think not that it's too hot because the problem may start immediately or later. the Device Manager in the Control Panel indicates these 2 works correctly and I can't find a place to make sure market. I clean the heat sink.  I'm not real smart but suggestions. What do the beeps mean.

  I finally found a solution for the mouse freeze problem which has been a pain in the A * because I bought the wireless mouse and used with my Windows 7 laptop. Try it to see if it works for me.

  THE MOUSE FREEZE PROBLEM SOLVED! (HOPE THIS HELPS)

  >>
  Mouse freeze problem is more likely to be linked to the USB SUSPEND MODE as most mice now use the USB port to connect the blow in.
  >>
  You can try this out. It works for me.
  >>
  Go in select
  >>
  According to what plan of power, you are 'Balance' or 'Power Saver', select the accordingly
  >>
  Select and expand <+USB settings="">by clicking the <+>sign
  >>
  Enlarge it <+USB selective="" suspend="" setting="">by clicking on the <+>sign
  >>
  Set both & on "Disabled" and click 'Apply'
  >>
  GEL MOUSE (SUSPEND) PROBLEM HAS DISAPPEARED FOR ME!
  >>
  Hope it will be useful.
  >>
  See you soon,.
  >>
  cybersam999
  >>

• Page ads TitanTV affects NOW my Firefox. I usually go there - several tabs - without any problems at all. Now - suspended. Flash crash, etc... What comes to change?

  (With WiFi and all - library computers, etc...) I had the habit of maintaining several tabs open. I've come to Firefox, since it managed this use much, much better than any version of Internet Explore. Running multiple tabs from the list television future, made sense and was very convenient... A. it seems now - after eliminating the other possibilities * page TitanTV is the cause of my Firefox suspended... (when it is open to all, it slows down even more pages of scrolling..?) So yes--"suspended", on which page, flash/shockwave - type accidents etc. etc. Obviously... I don't have to use the page... or run on this browser, but ALL Of A sudden what originally do this? What is the content of the ad on there somehow? I would like to know at this point... and I prefer it to other browsers. [* And comply with the posted helps out usual as well as uninstall/reinstall Firefox and antivirus (Avast), clear memory cache...] I wish if I could solve this new mystery here... Thank you! )

  (1) can you try to start Firefox in Mode safe to see if Firefox works correctly without error? You can start Firefox in Mode safe below:

  • Windows/Mac: choose Help > restart with disabled modules
  • Linux: run firefox-safe-mode in the Terminal/Konsole

  If Firefox opens fine with no problems, it is probably one of your extensions that is causing the problem. You can reactivate your modules one by one until you find the one that is causing the problem to be re-activated.

  Some problems with Flash video playback can be resolved by disabling hardware acceleration in Flash Player settings. (See this article for more information on using the Flash plugin in Firefox).

  To turn off hardware acceleration in Flash Player:

  1. Go to the Adobe Flash Player help page.
  2. Right-click on the Flash Player logo on this page.
  3. Click settings on the shortcut menu. The Adobe Flash Player settings screen opens.
  4. Click the icon in the lower left of the Adobe Flash Player settings window to open the display panel.
     
     

     

  5. Remove the enable hardware accelerationcheck box.
  6. Click close to close the Adobe Flash Player settings window.
  7. Restart Firefox.

  This Flash Player help - display settings page contains more information about the Flash Player hardware acceleration, if you are interested.

• Satellite Z930 - suspend the problem with connected USB hard drive

  Hello

  Owner of a newly acquired Satellite Z930-15 X, I have a few questions/problems:

  1) suspends the work of RAM and good hibernation when there is no external hard drive connected. If there is one is connected, the laptop immediately returns back to suspend state. Is there a solution for this?

  (2) is there a way to selectively disable Bluetooth? Currently, only toggle airplane mode is available (with Fn + F8 or Windows 8 charm bar). This activates / deactivates the Wi - Fi or Bluetooth I think.

  (3) the portable computer is wobbly on reception. I put a bit of thin paper at the corner of a bottom (bottom left) so that it can be stabilized. Apparently, the problem is also mentioned in another thread. Is there a suggestion to fhix this problem?

  Thank you.

  1 / what HARD drive is connected to your laptop? When I use the external 2.5 HARD drive with my Satellite U940 I n t have problem.

  2 / I ve tested it on my machine and I noticed the same thing. When WIFI is disabled software BT is off too. I didn t find a way how to separately control adapter WLAN and BT.

  3 / I think that this issue needs to be clarified with Toshiba service. They must check and perhaps exchange rubbers inside.

• I intalled Creative Suite 6 on my iMac and the serial number has been validated, but when I connect activate the software, it is suspended until I have the strength of smoke activation. No error message; I have no problem signing in the case.

  I installed Creative Suite 6 on my iMac (Yosemite) and the serial number has been validated, but when I try to connect to activate the software, it is suspended until I have force the activation of quit smoking. No error message; I have no problem signing in the case. Help?

  Hi Jdburton,

  Please check: https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  Concerning

  Megha Rawat

• Suspend data problems

  First of all - I am very new to SCORM, LMS, or something of the sort.  I know very, very little about it.

  We sent our module to the client in order to implement in their LMS - everything was perfectly fine, except that we received a complaint concerning our suspend data and the way in which the progression of the user is followed.  Essentially, he has not followed or follow-up in a strange way.

  Basically, all we need to ensure the follow-up is the progression of the user in the slides so that we a) they all the b) back to the module slides and continue viewing, if they interrupt their viewing of the course.

  There are quiz questions, but the answers do not need to be followed.

  My questions would be a) we filled the SCORM manifest & other options e-Leaning according to the wishes of the customer, and requiring their LMS, my assumption would be that progress and follow-up would be processed without any additional customization from us, which is a false assumption? (b) I noticed that two of our quiz questions were always reporting a quiz, they shouldn't be, we re - publish and test again, but it will be at least a day before having your comments, I wonder - could cause this issue alone suspends data problems?

  Any comment is appreciated-

  Been awhile. My apologies if this is too late or problems are solved.

  For the first part, which suspend_data customer "would see". It's a strange request, as most users have no idea what suspend_data is much less how it should look really! I suspect that you mean the results during the recovery of the lesson, it's not what you expect... and if that's the case, what is the precise, unexpected result?

  As replied, a blade be 'full' it must play along, so if you have, say, audio in there but don't expect not for audio to play through, slide out to the end, is not 'complete '...

  Quiz was being classified... How? If you Quiz slides in there, I don't think you can force them to not be classified (although maybe you can, I've never tried). If this isn't the case, Quiz slips, and they are made by hand, as you of COURSE questionnaires it is not marked to report interactions? Best way to check is which to choose

  Project > advanced interaction

  and see if one of these interactions have 'Track Score' active.

  If you can get nothing to report for the 'quiz' but can not get the slide completions to report correctly, so my suggestion is your ' c)' option. A button marked at the end that says something like "Click here to complete the lesson" often works best. A scored interaction, statement of completion and score to 100%...with as an interaction of caterpillars, they should get 100% by clicking this button. Who can also offer a way for suspend_data solve... rumors have that including caterpillars interaction can help you with questions...

  HTH!
  Erik

• Apple would send a text to inform customers of an appleID problem or your ID has been suspended?

  Apple would send a text notifying me that my appleID has been suspended? Or is the text that I received a SCAM!

  Edgehook,

  No, it's a scam.

  

• Malicious software removal tool update problems the last few months. Suspended for a very long time. Vista Home Premium 32 bit SP2

  Hello

  The last 3 months when the download and installation of my updates for Windows Vista, it gets stuck for hours on the malicious software removal tool. I have to cancel it. Restart the computer and reinstall. Then he moved very well and quickly according to historical updates. Last month, it was really difficult to cancell it well. He finally got through it. Here is a little history on my machine. I'm very very well with this computer. Each week, I do disk Cleanup, then defrag with diskeeper, virus scan with Microsoft Security Essentials. And every six months, I run a very large disk check and I said to correct errors and try to fix bad sectors. More than 3 years, I only had 2 minor bluescreens. I always make sure I have all my products Microsoft put updated. When I first got this computer I had a guy I.T. (a neighbor) out of the box and clean all the useless garbage out of it and it partitioned the hard drive. More than 3 years, he managed as a champion. Always very fast and all.

  I hope that I'm not the only person having problems with this. Just start with the month of June, then July, then August.

  P.S. I have 2 laptops running XP sp3, one is 9 years old and the other is 11 years old, he had 2000 top PRO, but I just put XP sp3 on it last month. They run too much like fields. I take good care of my computers with a little help from my friend IT. They have the same programs as this one and I do the same things to them, but they do not have this same problem with the release of the MSRT tool. Which leads me to think that it is specific to Vista only, I have a Windows 7 computer yet, so I can't speak for seven.

  Any suggestions or ideas? We are scratching our heads on this one.

  Thank you in advance for your time and help

  Tim Kerr

  Your misguided use of registry cleaners could have caused this behavior! If you ever think that your registry database must be cleaned, repaired, amplified, to the point, cured, twisted, fixed or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.

  See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~

  Your use of Revo Uninstaller and the foregoing notwithstanding, applications, (Norton and McAfee) are known to not uninstall (or upgraded) themselves.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. open IE (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  5. restart & test (i.e. the or shortly after seven 14-10 when the next MRT is scheduled to be released).

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft