Suspend problems in mode: don't wake up from sleep

Similar Questions

• Satellite A500-18 x - don't wake up from sleep mode

  I've had this laptop for a little over a week and when it goes into mode 'sleep' trying to wake him up, all the lights on the keyboard lights up and I hear it works but the screen remains black. I updated display drivers and that fixed it for a few days but now it stopped working again. updated audio drivers would force it to not wake from sleep mode kos that he worked well, since I've updated the display driver and then yesterday I updated audio drivers and he returned to not wake up once again in mode 'sleep'. any help much apreciated.

  Updated the BIOS and update the driver to display again.
  Maybe the after the audio driver that something was wrong, you can clean the registry using CCleaner in most of the cases it s a good idea.

• Satellite don't wake up from sleep or hibernation when the lid is closed

  It is a problem that I had with my laptop from the outset - if the laptop is in sleep or Hibernate mode and the lid is closed, or the lid is closed and will switch "standby" from there, it won't wake up or respond to the switch once again opened.

  Even holding down the power button has no effect, the only way to turn it back on is to remove the battery, put it back and turn the phone back on, lose anything I had opened.

  I fear that the laptop could be damaged by this, but there is no other way.
  This isn't a problem with the settings of windows, I had the same problem with the function suspends in ubuntu.

  Anyone had similar problems or know anything than either could have caused this?

  What model of Satellite L do you have exactly?
  What system is pre-installed? Have you tested this problem with laptop recovery fees?

  BIOS is up to date? If it is not updated in the BIOS.
  After update BIOS, set the default BIOS and test the features of the laptop.

  Your comments would be appreciated

• Satellite L350 - don't wake up from sleep mode

  Hello

  I have a new Satellite L350 with 4 GB of RAM on windows 7. whenever he goes to sleep (or put into hibernation) he does not automatically wakes.
  Is there a specific key or sets of traits required keys?
  I find myself pressing the power button which tells me that it is not stopped correctly.

  I disabled the sleep and Hibernate in the meantime functions.
  Thank you

  Hello

  You should check if your BIOS is up to date.

  Usually, there is no special procedure to wake in Unity mode sleep or hibernation, you must press the power button (very short) and it will wake up the unit on the mode 'sleep'.

  Welcome them

• MacBook pro freezes for 5-10 minutes everytime I wake up from sleep mode?

  Since the upgrade to Yosemite, my macbook pro goes to the loading screen grey which usually appears when opening my laptop after that he almost dies everytime I wake up from sleep mode. It freezes on this screen for a few moments, and then when I get to my normal screen, it continues to remain frozen for an extra few minutes. The mouse will not work until a "Set up Bluetooth keyboard" menu appears, then disappears. The problem has persisted through several software updates. I searched endless forums and topics, but none seem to match my problem. Can anyone help?

  Data sheet:

  OS X Version 10.10.1 Yosemite

  MacBook Pro (15-inch, mid-2012)

  2.3 GHz Intel Core i7 processor

  16 GB 1600 MHz DDR3 memory

  Free to 318,84 GB 107,02 GB

  I had the same situation; started during the upgrade to Yosemite, continued with El Capitan. I tried a n y t h i n g for a few months, revisiting the forums etc. The message in the system log, leaving the "driver GPU seems to be suspended. Does my Mac Pro completely unworkable. It was a software problem because it does not occur in safe mode. Now I just went down to the Mavericks and the problem is completely resolved. I can use my computer again.

• New installation of 8.1 on Y510p guard pro wake up from sleep mode

  Any ideas on why a fresh install of windows 8.1 vanilla pro would keep wake up from sleep mode? What spectator even can I look at to understand this?

  It seems that turning off sleep timers solved my problems. I also disabled standby (but not sleep) when it is plugged in and the laptop stay asleep until he does it's nighty WHS backups and then fall back to sleep now.

• Computer Windows XP doesn't wake up from sleep mode.

  Original title: standby mode does not wakeup.

  Windows XP PC collapsed to wake up from sleep mode.

  Hello

  Glad to know that you have solved the problem.

  If you have any further questions on your computer, thanks for posting your question, we will be happy to help you.

• laptop won't wake up from sleep mode

  laptop won't wake up from sleep mode

  Hello

  Here's the quickfix.

  Set the laptop to sleep instead of Hibernate. Portable computers may have problems with the Hibernate function. Here are the instructions to navigate:

  1. go in Classic view of Control Panel. (Ctrl + ESC, then type 'control' to quickly control panel access)

  2. double-click on the icon power options

  3. click on "change when the computer sleeps.

  4. click on "change power avancΘs."

  Go to the menu of sleep and

  value "Allow hybrid sleep": OFF

  * Set the parameter "Hibernate after": NEVER

  Note: You need to type the following in the field, what is not there drop down to select.

  This is most likely the issue and the resolution. However, here are a few other troubleshooting steps if you have any questions:

  Troubleshooting of the sleep mode function:

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  Hope this helps,

  Steve <> Microsoft Partner

• keyboard and touchpad does not work once the PC wakes up from sleep/standby

  Please help find the diagnosis and explain in detail what to do with the following problem: keyboard and touchpad for PC with Win 7 Ultimate stop responding when you wake up from sleep/hibernate implementation modes. If you plug the USB mouse, the cursor move again come back to turn off the PC is to reload the OS from scratch. Where to look in the PC software?  Thank you for your competent answer.

  Hello
  I suggest that you follow the steps below and check out them.
  You must be logged on as administrator to perform these steps.
  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in Device Manager, look for the keyboard, and then double-click the device name.
  3. click on the tab power management and then check the option "allow this device to wake the computer".
  4. click on Ok.
  5 locate the touchpad and repeat step 2 and 3.

  See also: http://windows.microsoft.com/en-US/windows7/Solutions-to-common-power-problems

  You can also try to update the drivers for the keyboard and the touchpad.
  For more information: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Thank you, and in what concerns:
  Swati Keni-Microsoft Support Engineer

• Crush the display flashes for 2-3 minutes after that mini mac wakes up from sleep

  Crush the display flashes for 2-3 minutes after that mini mac wakes up from sleep

  If you have another Thunderbolt cable, plug it into the unused port on the

  Thunderbolt Display and then in the Mini and see if the same thing happens.

  What you can see is a precursor of the poster, built out of the cable.

  At least, it could eliminate a costly repair problem.  Although the cable itself is not

  expensive, opening to the top of the screen of TB to replace could be.

  Well that not connected on a Mini, I began to see in similar behavior my

  iMac, so that there was finally a break in the complete cable.

• Wake up from sleep mode, monitors turn on but no image is displayed. HP ENVY Phoenix h9

  Product: HP ENVY Phoenix h9 PC Series

  Product #: H3Y51AA #BL

  Model: h9-1387

  OS: 8 64-bit Windows

  Monitors: DELL 2407WFPHC x 2

  Updated graphics drivers to the latest version non-beta.

  Hello

  Since buying my PC a few months ago, it has been one of the ' display' problems after another. This is the current problem:

  When executing step by step away from my computer, I block via Win + L and shortly after that my monitor turns off. When you return a few moments later, I try to wake up to the top (but not really "wake up"...) To try to solve the problems of previous display, I already disabled hibernation options and sleep) my computer by moving my mouse. This causes monitors leave standby mode and be able to raise but what is dispalyed is black screens when I should have been introduced to the login screen.

  Mouse clicks and keyboard do nothing and I'm stuck at black screens. To continue, I press the power button on my PC causing the hard drives to spin-up and shortly after the computer turns off. I press the power button and start the computer to the login screen where as soon as I get my password, Windows loads and all my programs etc appear like they were before I blocked my PC.

  You can see previous problems, I had the list below, if all goes well they will help you to detect the cause of the current problem.

  Help, please.

  Thank you!

  Peter

  Previous problems I had:

  (1) when the awakening from hibernation, the computer would not wake up screensavers leaving no way for you to connect and save your work. Hard reboot needed. Solution: Disable hibernation Windows features.

  (2) error in the sense of "driver has no display and recovered." Possible solution: disabled hardware acceleration in Firefox.

  (3) when waking from sleep, I find that my 2 monitors have merged into one and a different resolution than usual. Once entered password to connect, programs that were on separate monitors are now on the same monitor. Right click on the desktop and selecting 'Screen Resolution'-> 'Detect' would set monitors to return to normal until the problem recurs. Possible solution: updated graphics driver. Don't know if this problem has been corrected, it may have just been concealed by the new problem mentioned above.

  Thanks, but the steps above had no effect.

  However, during a windows update, my graphics card driver has been restored and that seems to have stopped the problem.

  Unfortunately, again I see apps that were on two screens before lock/standby, appearing on the screen even after release sleep/wake. So far he did not often so we'll see.

• Connect button on Windows 7 that SOMETIMES appears to wake up from Sleep Mode, sometimes goes right on the desktop

  Hello.  Suddenly, from this morning or perhaps yesterday (April 15), when I click my mouse to wake up my new Windows 7 Inspiron PC from Sleep Mode, a Windows login, button began to appear is no longer for me to need to click.  Only a few minutes ago, when I woke up my PC by clicking my mouse, the button HAS appeared!  Does the show button only SOMETIMES, as every time the PC is asleep (hibernation?) for a SHORT time or long?  I'm puzzled about why this behavior started all of a sudden. Initially, he always showed the button - but maybe it's because as a first step, maybe I had waited long before going to my PC to wake him, don't know.  This new variable behavior could be linked to the 12 April Security Update for Microsoft .NET Framework which perhaps has not taken effect until a subsequent Restart, that maybe, I did last night or this morning?

  Thanks for the ideas.

  Alyse

  Hi Evelyn,

  This problem is perhaps due to the power settings on your computer. Ensure that requires a password on the alarm clock is set. See the following steps.

  1. Click Start, and then click the power Option.
  2. Choose several power supply options. In the Power Options window.
  3. Click on request a password for reactivation.
  4. Save changes and check.

  If the problem persists, run the power Troubleshooter and check. Check out the following link.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Flex 10 wake up from sleep with Windows 8.1 problem

  I installed Windows 8.1 but have a problem with the wake up the computer from sleep mode. Someone else the problem?

  
  

• M70-160: don't wake up from hibernation or standby - hardware or software?

  I just maaaaaan!

  works fine, but will not wake up from hibernation or 5000mAh! unless you're going to wait a while! 15 min or something like that!
  After that he's going to wake up and work normally.

  I thought that it is overheating problem but now just turn it on and when the toshiba logo appear if you turn it off, it works again, but after 15 min it will BE!
  This isn't a problem of heating!

  She does this even without HD top!
  at first, it was the hibernation and standby problem, now it dose the same with stop!

  what I can do!

  I bought just the guys! ASP is now a way!
  is there anyway that I can do to fix this!
  I have difficulty PCs a lot, but not books!

  Hello

  You can also contact your local Distributor and check with him. They also have enough experience. On this path, it is not easy to tell exactly what is happening.

  Is the unit preloaded with recovery media or with your own operating system?

• T400 - Fn key wake computer from sleep mode.

  It is therefore normal that pressing the Fn key + another key (on the keyboard) - computer wakes from sleep?

  Or something wrong with the operating system?

  In fact, the single Fn key should wake up the machine to sleep/wake.

  Nothing wrong with the operating system.

  Kind regards.